RT Flash Creator
User Manual
JTN
©2016 Raw Thrills, Inc.
Page 1
Index
Creating A Flash Drive Installer..............................3
Adding and Removing Games.................................9
Using Flash Installers.............................................14
Updating The Flash Install Creator........................19
Compatible Games and PCs...................................24
Page 2
Creating A Flash Drive Installer
Page 3
Creating A Flash Drive Installer
Step: 1
Select the game you would like to create an installer for
from the drop down menu.
Then click the 'Next' button to continue.
Step: 2
Disconnect all flash drives you want to make
into installers, from your computer.
Click the 'Next' button to continue.
Page 4
Creating A Flash Drive Installer
Step: 3
Plug-in each flash drive you want to turn into an installer.
As the program detects each drive, an info box will
appear listing information about the drive.
Once all of the drives you want to turn into installers
have appeared, click the 'Next' button to continue.
Note: The program will only recognize up-to 10 drives at a time
Page 5
Creating A Flash Drive Installer
Step: 4
A warning screen will appear, informing you that each
of the drives listed will be completely erased.
Click the 'Next' button to continue.
Step: 5
The flash drives are now being turned into installers.
This process may take a while.
When complete you will automatically be taken to the next screen.
Page 6
Creating A Flash Drive Installer
Step: 6
This screen displays the results of the Flash Creator.
If a drive was successfully turned into an installer it will be Green.
If a drive failed to be turned into in an installer it will appear Red.
Success: Green || Failed: Red
Step: 7
Remove all flash drives you turned into installers from you computer.
Page 7
Creating A Flash Drive Installer
Step: 8
DONE!
Page 8
Adding and Removing Games
Page 9
Adding and Removing Games
Step: 1
Plug in the Flash Drive installer you would like to add or remove games from.
Note: The flash drive must have previously been setup using the
Flash Creator Program
Step: 2
In a Windows Explorer window, navigate to the flash drive. You should
see 2 folders, “boot” & “porteus”, as well as the .ISO files of the game
you installed with the creator.
Page 10
Adding and Removing Games
Step: 3
Adding Games
To add a game to the drive simply copy all the ISOs of the desired game to this section
of the flash drive. An easy way to this is to simply drag and drop the ISO file.
Page 11
Adding and Removing Games
Step: 4
Removing Games
To remove a game, simply delete all the ISOs of the game you wish to remove,
from the flash drive. A quick way to delete an ISO is to click on it and press the
delete key.
Page 12
Adding and Removing Games
Step: 5
Once you have finished adding and removing games, safely eject the flash drive
from the computer by right clicking on the drive in the left hand column, and
selecting “Eject” from the menu.
Step: 6
DONE!
Page 13
Using Flash Installers
Page 14
Using Flash Installers
Step: 1
Plug the flash drive into the PC you wish to update. Then power-cycle the
machine.
Page 15
Using Flash Installers
Step: 2
After a few seconds a menu such as the one shown above should appear.
Note: If the computer boots normally and the menu above does not appear the PCs
BIOS settings may be incorrectly setup. Contact your service provided for further
assistance.
Page 16
Using Flash Installers
Step: 3
Navigate to and select the game you want install. You can either use the buttons inside
of the coin door or a keyboard, to navigate the menu. The controls are displayed on the
right hand side of the screen.
By default the service buttons are displayed, however if the RIO is not detected or a
key press from a keyboard is detected, the keyboard controls will be displayed instead.
Page 17
Using Flash Installers
Step: 4
A confirmation message will appear on screen. Confirm you want to install the
game, and the installation will begin.
Step: 5
DONE!
Page 18
Updating The Flash Install Creator
Page 19
Updating The Flash Install Creator
Step: 1
In the top left-hand corner of the window, select 'File' → 'Update Installer'.
Step: 2
Click on the “Select Update File” button.
Page 20
Step: 3Install Creator
Updating The Flash
Navigate to the location of the Flash Installer Update file you wish to use.
Select the file and click open.
The update file will be named “Flash_Installer_Update_#.#.#.7z” where the #
will be replaced with numbers. (ex. Flash_Installer_Update_1.0.0.7z)
Page 21
Updating The Flash Install Creator
Step: 4
If the file selected is a valid update file, the version number of the update
will be displayed and the “Update” button will be enabled.
Click the “Update” button to finish updating.
Page 22
Updating The Flash Install Creator
Step: 5
Once the update has finished, you will see a “Result” line
which will inform you if the update was successful or not.
Step: 6
DONE!
Page 23
Compatible Games and PCs
Page 24
Compatible Games and PCs
Raw Thrills Flash Drive Installer Compatibility Sheet
Compatible Games Compatible PCs
Raw Thrills Play Mechanix Dell
Super Alpine Racer Aliens Armageddon Optiplex 390
Batman Big Buck Hunter HD Optiplex 3010
Doodle Jump Moto GP Optiplex 3020
Galaga Assault Terminator Salvation Optiplex 3050
Jurassic Park
Pacman Chomp Mania Bumble Bear Games HP
Pixar Cars Killer Queen 6005
Super Bikes 2 6305
Super Cars 705
SnoCross
World's Largest Pacman
Notes:
Any Raw Thrills game release 2016 or later is compatible
Any Play Mechanix game released 2017 or later is compatible
Any PC released 2016 or later is compatible
Page 25
