Scribd
Upload
124 views2 pages

P15A Hall Sensor (1000V/AT) : Absolute Maximum Ratings

The document provides specifications for the AHS P15A Hall Sensor, including its maximum ratings, electrical characteristics, and package dimensions. It has high sensitivity and low temperature coefficients. Key parameters include an operating temperature range of -100 to +180 °C, an output Hall voltage of 100mV typical at 1mA and 100mT, and temperature coefficients of -0.05 to -0.13%/°C for Hall voltage and 0.3 to 0.4%/°C for input resistance.

Uploaded by

leir2l
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views2 pages

P15A Hall Sensor (1000V/AT) : Absolute Maximum Ratings

The document provides specifications for the AHS P15A Hall Sensor, including its maximum ratings, electrical characteristics, and package dimensions. It has high sensitivity and low temperature coefficients. Key parameters include an operating temperature range of -100 to +180 °C, an output Hall voltage of 100mV typical at 1mA and 100mT, and temperature coefficients of -0.05 to -0.13%/°C for Hall voltage and 0.3 to 0.4%/°C for input resistance.

Uploaded by

leir2l
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AHS

P15A Hall Sensor (1000V/AT)


The P15A Hall Sensor is outstanding for its ultra-high

AHS
sensitivity and its low temperature coefficients.
The P15A Hall Sensor is fabricated from an
AlGaAs/InGaAs/GaAs 2 - DEG (two dimensional electron
gas) heterostructure.

Absolute Maximum Ratings


Size and shape
Parameter Symbol Rating Unit of 2DEG Hall
Control Voltage Vc 6 V sensors
Control Current Ic 1.6 mA Ohmic
contact L
Power Dissipation PD 9 mW
W = 70µm
Operating Temperature Top -100 to +180 °C L = 210µm W
Storage Temperature Ts -100 to +180 °C Hall
Soldering Temperature Tsol 260 °C cross L
Electrical Characteristics
Parameter Symbol Test Condition MIN TYP MAX Unit
Output Hall Voltage VH Ic=1mA, B=100mT - 100 - mV
Residual Ratio*1 VHo/H Ic=1mA -10 - +10 %
1
Residual Ratio* VHo/H Ic=0.5mA -4 - +4 %
Input Resistance RIN Ic=0.1mA, B=0 mT 3.4 3.7 4.1 KΩ
Output Resistance ROUT Ic=0.1mA, B=0 mT 3.4 3.7 4.1 KΩ
Temperature Coefficient α Ic=1mA, B=100mT
of Hall Voltage*2 (T1= -100°C, T2=180°C) -0.05 -0.08 -0.13 %/ °C
Temperature Coefficient ß Ic=1mA, B=0 mT
of Input Resistance*3 (T1= -100°C,T2=180°C) - 0.3 0.4 %/ °C
Linearity of Hall Voltage*4 ϒ Ic= 1mA, B1=60mT, B2=500mT - 1 1.5 %

Hall Voltage V Magnetic Flux Density I = 1 mA


600 *1. Residual Ratio = VHo (B = 0mT)
Hall Voltage VH (mV)

500 VH (B = 100mT)
400
*2. 1 VH (T2) - VH (T1)
300 α= x x 100
VH (T1) T2 - T1
200
100 *3. 1 RIN (T2) - RIN (T1)
ß= x x 100
0 RIN (T1) T2 - T1
0 100 200 300 400 500 600
Magnetic Flux Density B (mT) *4. KH (B2) - KH (B1)
ϒ= 1
x 100
2 [KH (B1) + KH (B2)]

Hall Voltage V Control Current B = 100mT


Hall Voltage VH (mV)

VH
KH =
200 IB
150
100
50
VHO: Offset Voltage B: Magnetic Flux Density
0 T1 ,T2: Ambient Temperature KH: Current Sensitivity
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Control Current (mA)
Through Slot Leaded Package (dimensions in mm) SOT 143 Package (dimensions in mm)
Terminal Connection Terminal Connection
Terminal Number Polarity Terminal Number Polarity
1 Input (+) 1 Input (+)
2 Output (+) 2 Output (-)
3 Input (-) 3 Output (+)
4 Output (-) 0.95+- 0.05 4 Input (-)

Package Dimensions
2.7+- 0.1
Sensing Min Max
Centre A 2.8 3.0
B 1.4 1.6
2.35+- 0.1
1.45 C 1.0 1.3
0.57 D 0.42 0.42
0.25 G 1.9 1.9
H 0 0.1
1.2 J 0.15 0.15
0.55 K 0.35 0.35
0.55 L 0.5 0.5
S 2.7 3.1
0.4
A
L G

3 4
15+- 1 S B
1 2

H C

J
0.3 0.22
1
K
1 2 3 4

Advanced Hall Sensors Ltd.


Il Palazzo, 7 Water Street, Liverpool L2 ORD Tel: +44(0)1513 303 630 Web:www.ahsltd.com

You might also like