L ± .

25

MAX UV TRANSMITTANCE
PEAK BELL
Ø 10.95
(278)
450
PSI
1.25 ABOVE 380nm IS 0.01% 24
(32) (610)
FEED APPROX BELL LENGTH
Ø 7.950±.005 PERMEATE PORT
(202) ASME CODE
Ø 8.44±.06 NAMEPLATE 1" NPT - FEMALE
(214) (OPTIONAL)

4.97
(126)
REF
PERMEATE PERMEATE
04
SERIAL
NUMBER 6.375±.03
XXX

(162)

.20 TO .60 GRIP

9.00 (5-15)
CL CL
6.0 2.00 (229)
(152)
(51) 12 11 13 CONCENTRATE
REF
REF
6.8 SUPPORT SUPPORT FEED/CONCENTRATE
RECOMMENDED SPAN
(173) POINT POINT 3" IPS PIPE GROOVED END
BETWEEN SUPPORTS
REF CL PORT CL PORT MULTIPORT CONFIGURATIONS IN
1 1/2", 2" , 2 1/2" & 3" ARE AVAILABLE
±.06 PLEASE SEE ORDER SECTION
(1.5)

DWG PART VIEW AT CENTER SUPPORT

QTY DESCRIPTION MATERIAL 4.2
REF NUMBER
CENTER VESSEL ON 2 OR 3 SUPPORTS NO. OF PORTS PORT LOCATION VESSEL QTY.
SHELL AT SPAN(S) "S" : 3 SUPPORTS REQUIRED 17 2 3 8 4.1 7
Filament Wound Epoxy/Glass composite - FOR LENGTHS -4 AND ABOVE 1
1* 1 99273 SHELL Head locking grooves integrally wound in
place.
2* A/R A/R F/C Port SA-351 CF3M
Approx
Dash L P S
3 A/R A/R F/C Port Seal Ethylene Propylene Weight
Length IN(MM) IN(MM) IN(MM)
HEAD LB(KG)**
4 2 194462 Bearing Plate Assembly - 60.75 47 8X1 117
4.1* 1 96157 Bearing Plate SB-221 A96061-T6
-1
PORT SIZE CODE
(1543) (1194) (203) (53)
4.2 1 96181 Danger Label -
D 1 ½" GROOVED END 100.75 87 48X1 132
5 2 96159 Sealing Plate Engineering Thermoplastic. -2
6 2 96161 Permeate Port Engineering Thermoplastic. E 2" GROOVED END (2559) (2210) (1219) (60)
7 2 45066 Port Nut Engineering Thermoplastic. F 2 ½" GROOVED END 140.75 127 80X1 145
8 2 196223 Head Seal Ethylene Propylene - O - Ring G 3" GROOVED END
-3
(3575) (3226) (2032) (66)
9 2 196215 Perm Port Seal Ethylene Propylene - O - Ring
HEAD INTERLOCK 180.75 167 64X2 163
10* 2 47336 Quick Release Retaining Ring SA-479 316
WARNING -4
INTERNAL PORT PRESSURE (4591) (4242) (1626) (74)
11 +
52169 Saddle Engineering Thermoplastic.
NOT TO EXCEED 125 PSI # 220.75 207 78X2 180
2 -5
12 2
+
45042 Strap Assy. 304 Stainless Steel-PVC Cushion. CAUTION: INCORRECT MANIFOLDING (5607) (5258) (1981) (82)
++ WILL CAUSE SEVERE LOCAL STRESS 198
13 4 46265 Strap screw. 5/16-18 UNC, 2.5'' L,304 Stainless Steel.
AROUND PORT AND MAY RESULT IN
260.75 247 92X2
-6
ELEMENT INTERFACE LEAKS AND PREMATURE FAILURE; (6623) (6274) (2337) (90)
14 2 A/R Adapter Engineering Thermoplastic. TAKE EVERY PRECAUTION LISTED
ON REVERSE, SEE INSTALLATION 300.75 287 106X2 209
15 2 196222 Adapter seal Ethylene Propylene - O - Ring
INSTRUCTIONS FOR FURTHER DETAILS 16 14 15 9 5 10 6 -7
(7639) (7290) (2692) (95)
16 4 A/R PWT Seal Ethylene Propylene - O - Ring
SECTION THROUGH END CLOSURE 340.75 327 120X2 233
17 1 96163 Thrust Cone Engineering Thermoplastic.
-8
+
3&
++
6 each furnished with length code 4,5,6,7&8. (8655) (8306) (3048) (106)
GENERAL NOTES: THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN, ARE THE CONFIDENTIAL AND PROPRIETARY INFORMATION OF
1. MAX. ANGULAR VARIATION BETWEEN ANY PORT ±0.5°. PENTAIR WATER INDIA PVT. LTD. PENTAIR WATER INDIA PVT. LTD. IS THE SOLE OWNER OF THE INFORMATION AND PROCESSES
2. DIMENSION IN INCHES (MM APPROX.). DEFINED HEREIN. THIS DOCUMENT, AND THE INFORMATION CONTAINED, MAY NOT BE DISCLOSED, REPRODUCED, DUPLICATED, VERNA, GOA
USED, SOLD, PUBLISHED, COMMUNICATED OR OTHERWISE DISTRIBUTED, IN WHOLE OR IN PART, FOR ANY PURPOSE WITHOUT THE
3. SHELL EXTERIOR COATED WITH WHITE RAL 9003, HIGH GLOSS POLYURETHANE PAINT.
EXPRESS WRITTEN CONSENT OF PENTAIR WATER INDIA PVT. LTD. THIS DOCUMENT AND ANY COPIES, IN ALL APPLICABLE FORMATS,
INDIA
4. ITEM 17 DOWNSTREAM ONLY. SHALL BE RETURNED TO PENTAIR WATER INDIA PVT. LTD. UPON REQUEST.
5. NOT TO BE USED FOR CONSTRUCTION UNLESS CERTIFIED BY PENTAIR. DRAWN BY: AND DRAWING DESCRIPTION: DRAWING N0.: REV.:
# 450 PSI FOR METALLIC PERMEATE PORT. FOR OPTIONAL PART NUMBERS, REFER PAGE 3. ALL INDICATED PENTAIR TRADEMARKS AND LOGOS ARE PROPERTY OF PENTAIR.THIRD PARTY REGISTERED AND UNREGISTERED DATE: 03JAN08 MODEL - 80H45 MEMBRANE HOUSING 99167 AG
* ASME PARTS. TRADEMARKS AND LOGOS ARE PROPERTY OF THEIR RESPECTIVE OWNERS.BECAUSE WE ARE CONTINUOSLY IMPROVING OUR CHECKED BY: MD CUSTOMER NAME: VESSEL MODEL:
PRODUCTS AND SERVICES, PENTAIR RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE. PENTAIR IS AN
** WEIGHTS GIVEN IN THE TABLE ARE FOR HIGHEST CONFIGURATION AND WILL VARY WITH CHANGE IN CONFIGURATION. DATE: 03JAN08 - 80H45
EQUAL OPPORTUNITY EMPLOYER.
APPROVED BY: SS PROJECT NAME: TOTAL QTY:
DATE: 03JAN08 - -
ECN NO. : 6559 CUSTOMER P.O.#: SIZE: SCALE: PAGE NO.:
C 2021 Pentair. All Rights Reserved. REV. DATE: 02AUG23 - A3 NONE 01 OF 03
 ORDERING:
RATING: PRECAUTIONS: Using the chart below, please check the features you require
DO…read, understand and follow all instructions; failure to
DESIGN PRESSURE…………………………..450 PSIG take every precaution will void warranty and may result in VESSEL LENGTH CODE – please check one
(3.10 MPa) vessel failure MODEL 80H45  -1  -2  -3  -4  -5  -6  -7  -8
MAX. OPERATING TEMP…………...…..……….190°F DO…mount the shell on horizontal members at span “S”
(88°C) using compliant vessel supports furnished; Shim saddles if MEMBRANE BRAND AND MODEL
MIN. OPERATING TEMP…………...…………..…20°F required. Tighten hold down straps just snug
 Please supply adapters for the following membrane brand and specific model
(-7°C) DO…align and center side ports with the manifold header.
Brand_________________________ Model_______________________
FACTORY TEST PRESSURE…. …………..CE / ASME Correct, causes of misalignment in a row of vessels
675 PSIG/ 495 PSIG connected to the same header
CERTIFICATION REQUIRED
(4.65 MPa)/(3.41 MPa) DO…use flexible type IPS grooved-end pipe couplings, at
QUALIFICATION PRESSURE ………...…......2700 PSI side ports; allow full, 0.125 inch gap between port and  Hydro testing at 1.1 times the design pressure.
(18.62 MPa) piping, and position piping to maximize flexibility of  In compliance with the ASME Sec X but not Code Stamped.
INTENDED USE: connection.  ASME Stamped and National Board Registered.
The CodeLine 80H45 Fiberglass RO Pressure Vessel is DO…provide flexibility in, and support for piping manifolds ADAPTER KITS
designed for continuous, long term use as housing for so that vessel can grow in length under pressure without  Hydro testing at 1.5 times the design pressure.
reverse osmosis membrane elements to desalt typical undue restraint; provide additional flexible joints in large  CE Marked UP DOWN
brackish waters at pressures up to 450 psi. Any make of pipes leading to manifold header. STREAM STREAM
eight-inch nominal diameter spiral-wound element is DO…provide overpressure protection for vessel set at not PERMEATE PORT SELECTION
easily accommodated; the appropriate interfacing more than 105% of design pressure Serial Number End
hardware for the element specified is furnished with the DO…inspect end closures regularly; replace components that
vessel. have deteriorated and correct causes of corrosion Size of the Permeate Port  1”  1.25”  1.5”
DO… Lubricate seals sparingly, using nonpetroleum
The CodeLine 80H45 is designed in accordance with the based lubricants, i.e. Glycerin or suitable lubricants. Type of Connection  FNPT  MNPT  BSPTM  BSPTF  IPS GROOVED
engineering standards of the Boiler and Pressure Vessel Material of Construction  Noryl  SS316L  Zeron 100
Code of the American Society of Mechanical Engineers DO NOT…work on any component until first verifying that
(ASME) as per Section X Edition 2021. F/C port, Bearing pressure is relieved from vessel Non Serial Number End
plate and Quick release spiral ring are designed as per DO NOT…make rigid piping connections to ports or clamp
Size of the Permeate Port  1”  1.25”  1.5”
Section VIII Division I Edition 2021. vessel in any way that resists growth of fiberglass shell
under pressure; Type of Connection  FNPT  MNPT  BSPTM  BSPTF  IPS GROOVED
At small additional cost vessels can be inspected during ***ΔDIA = 0.015 in. (0.4mm) and
construction by an ASME Authorized Inspector and ***ΔL = 0.2 in. (5mm) for a length code –8 vessel Material of Construction  Noryl  SS316L  Zeron 100
ASME Code stamped. DO NOT… hang piping manifolds from ports or use vessel in Note:
any way to support other components
The CodeLine 80H45 must be installed, operated and DO NOT…tighten Permeate Port connection more than one
 Standard offering is 1.0” FNPT in Noryl.
maintained in accordance with the listed precautions and turn past hand tight  1.25” & 1.5” BSPTF, 1.25” & 1.5” FNPT connections cannot be offered.
good industrial practice to assure safe operation over a DO NOT… operate vessel without connecting both Permeate STRAP ASSEMBLY
long service life. Ports internally to complete set of elements or otherwise
plug ports internally so that external piping connection is  SS304  SS316  SS316L
The high performance Filament wound FRP shell must be
not subjected to feed pressure
allowed to expand under pressure; undue restraint at FEED/CONCENTRATE PORT SELECTION
DO NOT…install Spacer on downstream end of vessel
support points or piping connections can cause leaks to
DO NOT…operate vessel without Thrust Cone installed Material of Construction  CF3M  Duplex SS (CD3MN)
develop in the shell. This side-ported vessel requires
downstream  Super Duplex SS (CD3MWCuN)
special precautions in mounting and connection to piping
DO NOT…pressurize vessel until double-checking to verify
so that the vessel will not be subjected to excessive stress
that the Locking Ring is in place and fully seated. Configuration  - CF3M 1G5G
due to bending moments acting at the side openings in the
DO NOT…operate vessel at pressure and temperature in
fiberglass shell. The end closure, incorporating close  –Multi port: (Refer SPEC.SHEET/PM/1.5”-3” for Multi ports selection).
excess of its rating.
fitting, interlocking metal components, must be kept dry Ports not available in 90º configurations.
DO NOT…operate vessel with permeate pressure in excess of
and free of corrosion; deterioration can lead to
catastrophic mechanical failure of the head.
125 psi at 190°F (0.86 Mpa at 88°C).
DO NOT…tolerate leaks or allow end closures to be routinely Serial number end 
Pentair will assist the purchaser in determining the
suitability of this standard vessel for their specific
wetted in any way
DO NOT…operate outside the pH range 3-11.
Opposite end  CODELINE BODY LABELS ARE PLACED AT 90°
operating conditions. The final determination however, BEARING PLATE MATERIAL
 A96061 T6 Aluminium
ON SERIAL NUMBER END AND AT 270° ON
including evaluation of the standard material of
construction for compatibility with the specific corrosive  Stainless Steel 316L THE OPPOSITE SIDE END
environment, shall be the responsibility of the purchaser. For complete information on proper use of the vessel
Alternate materials with enhanced corrosion resistance are Please refer to the 80H Series USER’S GUIDE 94182.
available on special order.

Specifications are subject to change without notice.

THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN, ARE THE CONFIDENTIAL AND PROPRIETARY INFORMATION OF
PENTAIR WATER INDIA PVT. LTD. PENTAIR WATER INDIA PVT. LTD. IS THE SOLE OWNER OF THE INFORMATION AND PROCESSES
1. PLEASE REFER TO 201413 FOR TRICLOVER DETAILS AND REFER PAGE-3 FOR OPTIONAL PART NUMBER.
DEFINED HEREIN. THIS DOCUMENT, AND THE INFORMATION CONTAINED, MAY NOT BE DISCLOSED, REPRODUCED, DUPLICATED, VERNA, GOA
USED, SOLD, PUBLISHED, COMMUNICATED OR OTHERWISE DISTRIBUTED, IN WHOLE OR IN PART, FOR ANY PURPOSE WITHOUT THE
EXPRESS WRITTEN CONSENT OF PENTAIR WATER INDIA PVT. LTD. THIS DOCUMENT AND ANY COPIES, IN ALL APPLICABLE FORMATS,
INDIA
SHALL BE RETURNED TO PENTAIR WATER INDIA PVT. LTD. UPON REQUEST.
DRAWN BY: AND DRAWING DESCRIPTION: DRAWING N0.: REV.:
ALL INDICATED PENTAIR TRADEMARKS AND LOGOS ARE PROPERTY OF PENTAIR.THIRD PARTY REGISTERED AND UNREGISTERED DATE: 03JAN08 MODEL - 80H45 MEMBRANE HOUSING 99167 AG
TRADEMARKS AND LOGOS ARE PROPERTY OF THEIR RESPECTIVE OWNERS.BECAUSE WE ARE CONTINUOSLY IMPROVING OUR CHECKED BY: MD CUSTOMER NAME: VESSEL MODEL:
PRODUCTS AND SERVICES, PENTAIR RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE. PENTAIR IS AN - 80H45
DATE: 03JAN08
EQUAL OPPORTUNITY EMPLOYER.
APPROVED BY: SS PROJECT NAME: TOTAL QTY:
DATE: 03JAN08 - -
ECN NO. : 6559 CUSTOMER P.O.#: SIZE: SCALE: PAGE NO.:
C 2021 Pentair. All Rights Reserved. REV. DATE: 02AUG23 - A3 NONE 02 OF 03
 ++
BEARING PLATE PART NUMBERS SEALING PLATE PART NUMBERS "A"

PERMEATE PORT SIZE ALUMINIUM SS F316L ### Standard used for Aluminium BP 96159
1.0"/1.25" 194462 194524
1.5" 194493 194555
Optional used for SS316L BP 97404

PERM PORT RETAINER RING & PORT NUT PART STRAP ASSEMBLY PART NUMBERS
NUMBERS
SS304 SS316 SS316L
1.0" / 1.25" Standard Port nut 45066
1.5" Port Retainer Ring 45247 45042 46926+ 94371+

++
F/C PORT & SEAL PART NUMBER
SIZE *CF3M **CD3MN ***CD3MWCuN SEAL
3" 97852 97903 97856 196141
2.5" 97851 97902 97855 196226
2.0" 97850 97901 97854 196225 SECTION THROUGH END CLOSURE
1.5" 97849 97900 97853 196224
PERMEATE PORT PART NUMBERS & PERMPORT TO F/C PORT OFFSET DISTANCE
FNPT MNPT BSPTF BSPTM IPS GROOVED
SIZE MATERIAL PART PART PART PART PART
NUMBER DIM "A" NUMBER DIM "A" NUMBER DIM "A" NUMBER DIM "A" NUMBER DIM "A"
NORYL 96161 6.0 97378 7.0 97664 6.0 97384 7.0 97689 7.3
1.0" SS316L # # 97247 6.0 97379 7.0 97382 6.0 97385 7.0 97388 7.3
#
ZERON 100 97295 6.0 97380 7.0 97383 6.0 97386 7.0 97389 7.3
NORYL NA NA 97665 7.0 NA NA 97666 7.0 97667 7.3
1.25" SS316L # # NA NA 97390 7.0 NA NA 97392 7.0 97167 7.3
#
ZERON 100 NA NA 97391 7.0 NA NA 97393 7.0 97395 7.3
NORYL NA NA 97668 6.6 NA NA 97399 6.6 97669 7.2
1.5" SS316L # # NA NA 97397 6.6 NA NA 97400 6.6 97448 7.2
#
ZERON 100 NA NA 97398 6.6 NA NA 97401 6.6 97403 7.2

THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN, ARE THE CONFIDENTIAL AND PROPRIETARY INFORMATION OF
PENTAIR WATER INDIA PVT. LTD. PENTAIR WATER INDIA PVT. LTD. IS THE SOLE OWNER OF THE INFORMATION AND PROCESSES
DIMENSION IN INCHES (MM APPROX.) DEFINED HEREIN. THIS DOCUMENT, AND THE INFORMATION CONTAINED, MAY NOT BE DISCLOSED, REPRODUCED, DUPLICATED, VERNA, GOA
* GRADE SA-351 CF3M USED, SOLD, PUBLISHED, COMMUNICATED OR OTHERWISE DISTRIBUTED, IN WHOLE OR IN PART, FOR ANY PURPOSE WITHOUT THE
EXPRESS WRITTEN CONSENT OF PENTAIR WATER INDIA PVT. LTD. THIS DOCUMENT AND ANY COPIES, IN ALL APPLICABLE
INDIA
** GRADE SA-995 CD3MN (UNS-J92205)
*** GRADE SA-995 CD3MWCuN(J 93380) FORMATS, SHALL BE RETURNED TO PENTAIR WATER INDIA PVT. LTD. UPON REQUEST.
DRAWN BY: AND DRAWING DESCRIPTION: DRAWING N0.: REV.:
# GRADE SA-479 UNS S3271860 / S32750
ALL INDICATED PENTAIR TRADEMARKS AND LOGOS ARE PROPERTY OF PENTAIR.THIRD PARTY REGISTERED AND UNREGISTERED DATE: 03JAN08 MODEL - 80H45 MEMBRANE HOUSING 99167 AG
## GRADE SA-479 SS-316L
TRADEMARKS AND LOGOS ARE PROPERTY OF THEIR RESPECTIVE OWNERS.BECAUSE WE ARE CONTINUOSLY IMPROVING OUR CHECKED BY: MD CUSTOMER NAME: VESSEL MODEL:
### GRADE SA-182 SS-F316L PRODUCTS AND SERVICES, PENTAIR RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE. PENTAIR IS AN
DATE: 03JAN08 - 80H45
+ OPTIONAL STRAP ASSEMBLY WITH SS316 & 316L MATERIAL SHALL BE SUPPLIED AS PER METRIC STANDARDS. EQUAL OPPORTUNITY EMPLOYER.
++ ASME PARTS. APPROVED BY: SS PROJECT NAME: TOTAL QTY:
DATE: 03JAN08 - -
ECN NO. : 6559 CUSTOMER P.O.#: SIZE: SCALE: PAGE NO.:
C 2021 Pentair. All Rights Reserved. REV. DATE: 02AUG23 - A3 NONE 03 OF 03