0% found this document useful (0 votes)
102 views2 pages

Astec Fury Burner EN

astec fury burner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
102 views2 pages

Astec Fury Burner EN

astec fury burner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ASTEC

FURY ™ BURNER
A robust build and simple, accessible construction makes the Astec Fury
burner a great cost-effective choice. Compared to other open-fired designs,
the Fury burner achieves better emissions and fuel efficiency by putting 50%
more combustion air through the burner.

www.astecinc.com

A S T EC, I N C. an Astec Industries Company


4101 Jerome Avenue • Chattanooga, TN 37407 USA • 423.867.4210 • astecinc.com
All specifications subject to change with or without notice. | Products shown are representative, details may vary. | Equipment shown with options available at additional cost. 04/2019
ASTEC
FURY ™ BURNER

Efficiency No Compressed Air


Rapidly swirling, high-energy air is The Astec designed pre-filming fuel
the key to the Fury burner’s efficient nozzle uses the combustion air from
combustion. The swirling air and the high-pressure blower to atomize
flame are created by the fixed fuel. This eliminates the need for
internal spin vanes, high-pressure compressed air at the burner, and The simple and accessible construction
makes burner maintenance easy; while
blower, and high velocity nose. helps increase nozzle life.
it’s rugged build keeps maintenance
costs to a minimum.
Compact Flame Shape Reliability
The Fury burner cleanly and Each burner is thoroughly tested
efficiently burns oil or gas. Its before leaving the Astec burner
compact flame makes it compatible facility to make start-up at your
with virtually all drum designs facility as fast as possible. For the
without complicated drum most reliable oil light-off, even under
modifications. cold and harsh conditions, the Fury
burner is supplied with Astec’s The compact flame enables the
Better Emissions exclusive heat tracing and insulation Fury burner to work with virtually
The Astec Fury burner is designed system on heavy oil burners. all drum designs.
to put 50% more combustion air
through the burner than competitive
designs with the balance of the
combustion air drafted in around
the burner nose. This means higher
combustion quality, better emissions,
and higher combustion efficiency
throughout the entire firing range.

BURNER FIRING SPECS

MODEL NUMBER F3 -2 5 F3-35 F3-50 F3-75 F 3-100


RATED CAPACITY
MILLIONS OF BTU/HR 25 35 50 75 100
(WITH 20% XSA)

NOMINAL AGGREGATE DRYING


CAPACITY TPH 100 140 200 300 400
(AT 5% MOISTURE)

BURNER AIR CAPACITY SCFH


(MILLIONS)
0.18 0.25 .36 .54 .72

INTEGRAL BLOWER HORSEPOWER 30 40 50 75 100

Above conditions are standard at 75° F at sea level. See detailed capacity, temperatures of 240° F, 0.2 BTU/Lbm F specific heat in the aggregate. Burner
performance sheets for each size for more information and specific flows and maximum design capacity is 100% of rated capacity. Advertised numbers are
pressures. Nominal aggregate drying capacity based on typical exhaust stack achievable in some conditions, but not guaranteed.

You might also like