ZPP and Z22 double suction
axially split single-stage
centrifugal pumps
Main industries and applications
ZPP and Z22 double suction axially split single-stage centrifugal pumps are used for demanding high-capacity
industrial applications to ensure process reliability, high efficiency, and low operating costs.
The range comprises over 20 sizes for each series with different impeller designs. This flexibility ensures that
energy consumption is minimized throughout the complete operating range of a pump.
ZPP and Z22 pump series are designed for demanding industrial applications to pump:
• Clean and slightly contaminated liquids
• Viscous liquids
• Low-consistency fibrous slurries
• Liquids in applications with small pressure pulsations
Oil and gas Hydrocarbon Power Pulp, paper General Chemical Water and
processing generation and board industry process industry wastewater
Features and benefits
1 Double entry impeller
• Double suction impeller, with split, staggered and skewed vanes give high efficiency and low Net Positive
Suction Head (NPSH) values
• Low pulsation impellers are available, designed to meet the stringent performance requirements of paper
machine head box applications
• Impeller installed on the shaft by strong interference fit without keyway in ZPP, which is easy to assemble,
disassembled hydraulically
2 Axially split casing
• Heavy-duty axially split casing
• Inspection, maintenance and removal of the rotating unit is possible without disturbing the piping or motor
• Single volute for lower head and double volute for higher head applications
• Low radial loads on bearings and low shaft deflection providing extended seal and bearing life
3 Casing wear rings
• Renewable casing wear rings protect the casing from wear and assure smooth flow to the impeller improving
efficiency
• Maintaining correct clearance is easy
• Wear ring locked in lower casing to prevent rotation
4 Heavy-duty shaft
• For high corrosion and wear resistance plus high strength
• Reduced shaft deflection for extended seal and bearing life
• Duplex stainless steel shaft
5 Versatile shaft sealing
Stuffing box
• External or internal sealing liquid
• Split stuffing box gland and lantern ring in ZPP with withdrawal grooves for easy service
Mechanical seal
• Different mechanical seals available
• Seals fit into the same chamber in ZPP as packings providing easier change to another type of sealing
6 Bearing unit
ZPP
• Long lifetime with high thrust spherical roller bearings, identical on both sides
• Grease or oil lubrication
• Effective bearing protection by non-contact wear-free labyrinth seals and deflector
• No adjustments needed making assembly quicker
Z22
• Long lifetime with high thrust angular contact ball bearing for axial load and deep ball bearing for radial load
• Grease lubrication as standard
7 Installation options
• Single and dual drive alternatives
• Horizontal or vertical installation gives compact installation
• Some Z22 sizes are available in angled execution
2
2
3 3
1
5 7 5
6 1
6
4 4
7
ZPP Z22
ZPP double suction axially split single-stage
centrifugal pump
Materials
Main part Duplex stainless steel design Cast iron design
Volute casing SS ASTM A890 Gr.3A CI ASTM A48 CL 35B
Impeller SS ASTM A890 Gr.3A SS ASTM A 890 Gr.3A
Shaft SS2324 SS2324
Casing wear ring SS ASTM A890 Gr.3A SS ASTM A890 Gr.3A
Shaft sleeve SS2324 SS2324
Operating data
50 Hz 60 Hz
Pump sizes 250 to 900 mm 10 to 35 in.
Capacities up to 25’000 m3/h up to 110’000 USgpm
Heads up to 160 m up to 525 ft.
Pressures up to 20 bar up to 290 psi
Temperatures
120°C 250°F
depending on material and size
Performance range
Capacity Q (USgpm)
Head H (m) 2,000 5,000 10,000 20,000 50,000 100,000 Head H (ft)
160
300
100
200
60
150
40
100
75
20
15 50
400 1,000 3,000 10,000 40,000
Capacity Q (m3/h)
Z22 double suction axially split single-stage
centrifugal pump
Materials
Main part Duplex stainless steel design Cast iron design
Volute casing SS ASTM A890 Gr.3A CI ASTM A48 CL 35B
Impeller SS ASTM A890 Gr.3A SS ASTM A 890 Gr.3A
Shaft SS2324 SS2324
Casing wear ring SS ASTM A890 Gr.3A SS ASTM A890 Gr.3A
Shaft sleeve SS2324 SS2324
Series Z22 is available in a wide range of material. Please contact your Sulzer representative for more information.
Operating data
50 Hz 60 Hz
Pump sizes 200 to 1’000 mm 8 to 40 in.
Capacities up to 17’000 m3/h up to 75’000 USgpm
Heads up to 220 m up to 720 ft.
Pressures up to 25 bar up to 362 psi
Temperatures
140°C 280°F
depending on material and size
Performance range
Capacity Q (USgpm)
Head H (m) 2,000 5,000 10,000 20,000 50,000 Head H (ft)
800
200
200
100
150
50 200
100
20
10 50
500 1,000 5,000 10,000 20,000
3
Capacity Q (m /h)
www.sulzer.com
E00502 en 9.2021, Copyright © Sulzer Ltd 2021
This brochure is a general presentation. It does not provide any warranty or
guarantee of any kind. Please, contact us for a description of the warranties and
guarantees offered with our products. Directions for use and safety will be given
separately. All information herein is subject to change without notice.
