Moodle2Word Questions – English template

[18EE704_SSD _Unit_3_FA10_27.7.2023_NS]

Question 01 (DE)
[120]

The process of converting cleaned cotton into laps is done by lap machines. These
laps are converted to slivers by a process called cording. A motor used for cording
is required to accelerate a drum having a large moment of inertia. It is required to
withstand prolonged accelerating periods. To meet these requirements the motor
selection must be made. The motor selected must have a very high starting torque
and low starting current so that starting losses are kept to a minimum. The
synchronous speed of the machine is 1500 rpm.

DE

Figure 1. The cording in the textile mill

Consider the given Fig.1 and answer the following question.

Defaul
t
mark:
General feedback:
Tags:
This is not actually a question. Instead it is a way to add some instructions, rubric or
other content to the activity. This is similar to the way that labels can be used to add
content to the course page.

1
Question 02 (MC)
[101] [SO1] [90]
Predict a suitable motor from the following for the application shown in Figure.1. MC
(1 Mark- [Ap/C, 1])
1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. Induction motor 100

B. Synchronous motor 0

C. DC separately excited motor 0

D. DC compound motor 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

2
Question 03 (MC)
[102] [SO1] [90]
In the motor shown in figure.1, calculate the slip if the rotor speed is 1200 rpm. MC
(2 Mark- [U/C, 1])
Default mark: 2
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
# Answers Feedback Grade
A. 0.1 0

B. 0.2 100

C. 0.3 0

D. 0.4 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

3
Question 04 (MC)
[103] [SO1] [90]
Predict a suitable speed control method from the following for the application shown MC
in Figure.1.
(1 Mark- [Ap/C, 1])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
# Answers Feedback Grade
A. Voltage control 0

B. Frequency control 0

C. Armature current control 0

D. V/f control 100

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

4
Question 05 (MC)
[104] [SO2] [120]

Assertion (A) : Any reduction in the supply frequency without a change in the MC
terminal voltage causes an increase in the air gap flux
Reason(R): It cause magnetic saturation of motor.
(2 Mark- [An/C, 1])
Default mark: 2
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
# Answers Feedback Grade
Both A and R are true and R is
A. 100
the correct explanation of A
Both A and R are true and R is
B. 0
not the explanation of A
C. A is true but R is false 0

D. A is false but R is true 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

5
Question 06 (MC)
[105] [SO1] [120]
The speed of the induction motor depends on ____________,while the speed of the
DC shunt motor depends on _____________. MC

(1 Mark-[Ap/C,2])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
# Answers Feedback Grade
A. Inductance, Resistance 0

B. Resistance, Inductance 0

C. Frequency, Flux 100

D. Flux, Frequency 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

6
Question 07 (MC)
[106] [SO2] [90]
Predict the output, if the relative speed between the rotating flux of stator and rotor MC
of the induction motor is zero.
(1 Mark-[Ap/C, 2])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
# Answers Feedback Grade
A. The slip of the motor will be 5% 0

B. The rotor will not run 100

The rotor will run at very high
C. 0
speed
The torque produced will be very
D. 0
large
E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

7
Question 08 (MC)
[107] [SO1] [90]
The part of motor that needs maximum attention for maintenance is
MC
_____________
(1 Mark-[Ap/C -1])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
# Answers Feedback Grade
A. Bearing 100

B. Frame 0

C. Stator Winding 0

D. Rotor winding 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

8
Question 09 (TF)
[108] [SO2] [90]
Lifts and Hoists needs frequent starting and stopping of Electric Motors TF
(1 Mark-[An/C -2])
Default mark: 1
Answers Feedback Grade
True 100
False 0
General feedback:
Tags:
Set grade '100' to the correct answer.

9
Question 10 (DE)
[120]
Most industrial processes exhibit highly nonlinear dynamics but are never the less
controlled with the classical PID linear technique, a widespread methodology with
the advantage of few parameters to tune according to established guidelines in the
closed loop system. The open loop chopper fed DC motor system consist of DC
source, switch CH1, switch CH2, free-wheeling diode FD, Diode D2 and the load
denoted by Inductor L and Back emf E as shown in Figure 1.

DE

Figure 1. Chopper fed DC motor

General feedback:
Tags:
This is not actually a question. Instead it is a way to add some instructions, rubric or
other content to the activity. This is similar to the way that labels can be used to add
content to the course page.

10
Question 11 (MC)
[109] [SO-1] [90]
Predict the type of converter used in the application shown in Figure 1. MC
(1 Mark- [Ap/C, 2])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. AC-DC 0

B. DC-DC 100

C. DC-AC 0

D. AC-AC 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

11
Question 12 (MC)
[110] [SO-2] [90]
In the circuit shown in Figure 1, select the switch to be operated to run the motor in
MC
forward direction.
(1 Mark- [U/C, 2])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. CH1 100

B. CH2 0

C. D1 0

D. FD 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

12
Question 13 (MC)
[111] [SO-3] [90]
In the circuit shown in figure 1, _________ becomes forward biased when the
MC
energy stored in the inductor is released.
(1 Mark- [U/C, 2])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. CH1 0

B. CH2 0

C. D1 0

D. FD 100

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

13
Question 14 (MC)
[112] [SO-3] [90]
The chopper is to be operated in closed loop. Select the sequence from the
following.
MC
A - reference speed, B - speed controller, C - gate pulse to switch, D - speed
sensor, E- error calculator, F - driver.
( (1 Mark- [U/C, 2])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. A,B,C,D,E,F 0

B. D,E,F,A,B,C 0

C. D,A,E,B,F,C 100

D. F,E,D,C,B,A 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

14
Question 15 (MC)
[113] [SO-3] [90]
During dynamic braking, the current flow from _______ where A - Back emf (E),
MC
B – switch (CH2), C – Inductor (L), D – Source (Vs).
(1 Mark-[U/C,1])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. A,B,C,D 0

B. B,C,D,A 0

C. C,D,A,B 0

D. A,C,B,D 100

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

15
Question 16 (MC)
[114] [SO-3] [90]
Assertion (A) : The power flow may be from source to load or load to source in the
above chopper.
Reason(R): The average load voltage is always positive but the average load MC
current may be positive or negative.

(2 Mark-[An/C,2])
Default mark: 2
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
Both A and R are true and R is
A. 100
the correct explanation of A
Both A and R are true and R is
B. 0
not the explanation of A
C. A is true but R is false 0

D. A is false but R is true 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

16
Question 17 (MC)
[115] [SO-3] [90]
From figure 1, the drive enters in to freewheeling mode when _____. MC
(1 Mark-[Ap/C,1])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. E>V 100

B. E<V 0

C. E=0 0

D. V=0 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

17
Question 18 (MC)
[116] [SO-3] [90]
For the figure 1, additional power is wasted in the form of resistance in _______. MC
(1 Mark- [Ap/C, 2])
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. Regenerative braking 0

B. Dynamic braking 100

C. Plugging 0

D. Electrostatic braking 0

E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)

18
Question 19 (TF)
[117] [SO-3] [60]
State True or False:
Choppers CH1 and CH2 should not be turned ON simultaneously as this would TF
lead to direct short circuit on the supply lines.
(1 Mark- [An/C, 1])
Default mark: 1
Answers Feedback Grade
True 100
False 0
General feedback:
Tags:
Set grade '100' to the correct answer.

19