MARS 400S PRO

User Manual
V1.0.0
 FOREWORD

Thank you for purchasing Hollyland Mars 400S PRO Wireless HD Video Transmission
system. Please kindly read this manual carefully before using it. Hope you have a
pleasant experience.

KEY FEATURES

 400ft Transmission Range between TX and RX(LOS)

 300ft Transmission Range between TX and APP(LOS)
 Integrated Cold Shoe for Quick Installation
 Lowest Transmission Latency 0.08s
 SDI Input & HDMI Input at TX
 SDI Output & HDMI Output at RX
 Supports DC Power Supply, USB Type-C Power Supply and Battery Power Supply
 1 Transmitter Supports 2 Receivers(1 Transmitter Supports 1 Receiver and 2 APPs
Monitoring, or 1 Transmitter Supports up to 4 APPs Monitoring Without Receiver)
 Supports Smart Channel Selection
 Supports APP Firmware Upgrade
 Direct Data Stream from RX for Live Streaming

1
 PACKING LIST

① ② ③

④ ⑤

1 TX WITH 1 RX PACKING
① Transmitter x1

② Receiver x1

③ Antenna x5

④ DC Adapter x1

⑤ User Guide x1

2
 PACKING LIST

① ② ③ ④

SINGLE RECEIVER PACKING

① Receiver x1

② Antenna x3

③ DC Adapter x1

④ User Guide x1

3
TYPICAL SETUP

PHONE

MONIT
OR

PAD

1 TX-1 RX SETUP

4
TYPICAL SETUP

MONIT
OR

MONIT
OR

1 TX-2 RX SETUP

5
PRODUCT INTERFACES

④ ⑨
② ⑤ ⑩
⑥ ⑪
③ ⑦
⑫
⑧

④ ⑨
② ⑤ ⑩
⑥ ⑪
③ ⑦
⑫
⑧

6
 PRODUCT INTERFACES

A TRANSMITTER B RECEIVER
① Antenna Interface ① Antenna Interface
② Fan Air Outlet ② Fan Air Outlet
③ SDI Input ③ SDI Output
④ OLED Display Screen ④ OLED Display Screen
⑤ UP ⑤ UP
⑥ OK ⑥ OK
⑦ DOWN ⑦ DOWN
⑧ Cold Shoe ⑧ Cold Shoe
⑨ USB Type-C Interface ⑨ USB Type-C Interface
⑩ Power Switch ⑩ Power Switch
⑪ HDMI Input ⑪ HDMI Output
⑫ DC Input ⑫ DC Input

7
INSTALLATION

① ④

② ⑤

8
 INSTALLATION

① Install the antennas as demonstrated.

② Secure the cold shoe with 1/4 screw hole at the bottom of the transmitter and mount
it to the camera.

③ Connect the HDMI input or SDI input of the transmitter with camera's by HDMI or SDI
cable.

④ Connect to a power supply(compatible with NP-970 battery or the same series of the
batteries).

⑤ Turn on the devices.

9
 OLED DISPLAY

①② ①②
E101010 ⑤ ⑤
③
④
CH2 ⑥ ③
④
⑥
8.1v 1080P60 ⑦ 8.1v ⑦
⑧⑨ ⑧⑨
A B

A TRANSMITTER B RECEIVER
① Device Number ① Device Number
② WIFI Signal Strength ② WIFI Signal Strength
③ Scene Mode ③ Scene Mode
④ USB Flash Detection Indicator ④ USB Flash Detection Indicator
⑤ Device ID ⑤ Device ID
⑥ Channel Display ⑥ Chanel Display
⑦ Video Format ⑦ Video Format
⑧ Fan Status ⑧ Fan Status
⑨ Battery Voltage Display ⑨ Battery Voltage Display

10
 OLED DISPLAY

E101010 E101010

CH2 CH2
1080P60 1080P60

CAUTION
１.This device supports several power methods, and the device will be charged by the
method which has a higher voltage.

* The picture on the left shows the symbol of Type-C power supply, the picture on the
right shows the symbol of DC power supply.

11
 QUICK GUIDE

ENTER MENU
Long press the “OK” button for 3 seconds to enter the root menu interface. Click “UP”
and “DOWN” button to switch menu options, click “OK” to confirm.

CHANNEL CHANGE
Press the button “ UP/DOWN” on the transmitter or the receiver to change the current
channel. Press “OK” to confirm the channel number, then the channel of the receiver and
the transmitter will be synchronously and automatically changed.

PULL STREAM FROM RECEIVER

PC

1.Confirm there is video format display on both transmitter and receiver. Use the Type-
C to Lan Connector to connect the laptop and RX.
2.Go to the network settings on
the laptop and set it to DHCP mode.
3.Go to your live stream software, such as VLC Player, OBS Studio, Vmix, etc., and
open the network video source via the RTSP URL: rtsp://192.168.218.25:5554.

12
 QUICK GUIDE

APP DOWNLOAD AND CONNECTION

1.“HollyView” APP Download

2.Connecting Method:
Enter the WiFi connection interface of mobile phone and find out the WiFi named as
"HLD + DEVICE ID", and input the WiFi password to connect (Factory Defult Password
is: 12345678). After successful connection, you can have the APP monitoring.

13
 PRODUCT PARAMETERS

Transmitter Receiver

HDMI Input(Type A Female) HDMI Output(Type A Female)

SDI Input SDI Output
Interfaces 2* Antenna Interfaces (RP-SMA Male) 2* Antenna Interfaces (RP-SMA Male)
DC Input DC Input
USB Type-C USB Type-C

DC Power Input:6-16V DC Power Input:6-16V

Supply Interfaces USB Type-C Power Supply:5V/2A USB Type-C Power Supply:5V/2A
Battery Power Supply:6-16V DC Battery Power Supply:6-16V DC

Power Consumption <11W <7W

Weight 206g 206g

(L*W*H): 110*72*33.5mm (L*W*H): 110*72*33.5mm

Dimension
(The Battery Plate Exclude) (The Battery Plate Exclude)

HDMI: HDMI:
480p60 480p60
576p50 576p50
720p50/59.94/60 720p50/60
1080i50/59.94/60 1080i50/60
1080p23.98/24/25/29.9/30 1080p24/25/30
1080p50/59.94/60 1080p50/60
Input / Output
SDI: SDI:
Video Format
1080p60/59.94/50(Level A) 1080p60/50(Level A)
1080p60/59.94/50(Level B) 1080i60/50
1080i60/59.94/50 1080p30/25/24
1080p30/29.97/25/24/23.98 720p60/50
1080PsF25 1080i50(1080PsF25/24/23.98input)
720p60/59.94/50 1080i60(1080PsF30/29.97input)
1080PsF24/23.98

Frequency 5GHz 5GHz

Modulation Mode OFDM OFDM

Transmission Power Maximum 21dBm /

Receiver Sensitive / -80dBm

Transmission Latency 0.08s 0.08s

Bandwidth 20MHz 20MHz

14
 FAE

If encounter any problems in using the product or need any help,please follow these
ways to get more technical support:

support@hollyland-tech.com

15
support@hollyland-tech.com