PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

Quantity
S. No. Description of item Unit Pump Staff Boundary Gate Total Rate Amount
House Quantit
15 HP Quarter wall y
Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means in foundation
1 trenches or drains (not exceeding 1.5 m in width or 10 Cum 27.03 67.26 66.45 1.01 161.74 180 29113.2
sqm on plan), including dressing of sides and ramming of bottoms,
lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as
Providing and la yi ng in posit ion ce merit conc rete of
specified grade excluding the cost of centering and
2 shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse Cum 2.70 8.70 10.59 0.18 22.18 5600 124208
sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non

3 modular) bricks of class designation 7.5 in foundation Cum 15.19 26.97 19.34 61.49 5300 325897
and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
4 exceeding 20cm in depth, consolidating each deposited layer by Cum 24.13 53.64 40.85 0.52 119.15 270 32170.5
ramming and watering, lead up to 50 m and lift upto 1.5 m.

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6
graded stone aggregate 20 mm nominal size) over
5 75mm thick bed of dry brick ballast 40 mm nominal size, well Sqm 8.61 22.40 31.01 700 21707
rammed and consolidated and grouted with fine sand, including
necessary excavation, levelling & dressing & finishing the top
smooth
Providing and laying damp-proof course 40mm thick
6 with cement concrete 1:2:4 (1 cement : 2 coarse sand Sqm 6.62 15.08 28.43 50.13 315 15790.95
(zone-III): 4 graded stone aggregate 12.5mm nominal size)
Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
7 superstructure above plinth level up to floor V level in all shapes Cum 14.62 24.10 2.97 41.69 5500 229295
and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non

8 modular) bricks of class designation 7.5 in Sqm 147.82 4.29 152.11 7000 1064770
superstructure above plinth level up to floor V level Cement mortar
1:4 (1 cement :4 coarse sand
Reinforced cement concrete work in beams, suspended
floors, roofs having slope up to 15° landings, balconies,
shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases above plinth level up to
9 floor five level, excluding the cost of centering, shuttering, finishing Cum 4.90 5.02 9.92 7500 74400
and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-
III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of

reinforced cementconcrete, excluding the cost of

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

10 centering, shuttering, finishing and reinforcement - All work 1:2:4 Cum 2.13 1.40 3.53 7800 27534
(1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate
20 mm nominal size)
11 Sqm 130.59 285.40 208.03 - 624.03 350 218410.5
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
12 6 mm cement plaster of mix 1:3 (1 cement: 3 fine sand) Sqm 29.83 62.91 - - 92.74 250 23185
Pointing on brick work or brick flooring with cement
13 mortar 1:3 (1cement : 3 fine sand): Flush / Ruled/ Struck or Sqm - - 164.88 4.80 169.68 250 42420
weathered pointing
Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
14 binding all complete Thermo-Mechanically Treated bars of grade KG 307.48 451.80 - 124.00 883.28 75 66246
Fe-500D or more (Reinforcement steel wil be supplied by NCC
from central store on Debitable Basis .)
Centering and shuttering including strutting, propping
15 etc. and removal of form for :Foundations, footings, bases of SQM - - - 1.92 1.92 350 672
columns, etc. for mass concrete

Quantity
S. No. Description of item Unit Pump Staff Boundary Gate Total Rate Amount
House Quantit
15 HP Quarter wall y
Centering and shuttering including strutting, propping
16 etc. and removal of form for Columns, Pillars, Piers, Abutments, SQM - - - 7.20 7.20 400 2880
Posts and Struts
Centering and shuttering including strutting, propping
17 etc. and removal of form for Lintels, beams, plinth SQM 5.37 6.03 11.40 700 7980
beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping
18 etc. and removal of form for Suspended floors, roofs, SQM 29.04 36.24 65.28 800 52224
landings, balconies and access platform
Structural steel work in single section, fixed with or
without connecting plate,including cutting, hoisting,
19 fixing in position and applying a priming coat of KG 92.52 92.52 30 2775.6
approved steel primer all complete (Reinforcement steel wil be
supplied by NCC from central store on Debitable Basis.)
Labour Charges for fixing M.S Doors/Windows
20 /Ventilators with M.S. Grills (Reinforcement steel wil Sqm 9.66 14.13 5.76 29.55 400 11820
be supplied by NCC from central store on Debitable Basis.)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse
sand : 4 gradedstone aggregate) finished with a floating
21 coat of neat cement, including cement slurry, but excluding the Sqm 19.08 59.23 78.31 5500 430705
cost of nosing of steps etc. complete. 40 mm thick with 20 mm
nominal size stone aggregate
Concrete screeding( 50 mm thick) and grading of roof
for water proofing treatment with Cement concrete
22 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate Sqm 18.90 40.78 59.68 550 32824
20mm nominal size) including 2 coats of cement slurry mixed with
water proofing cement
Finishing walls with Acrylic Smooth exterior paint of
required shade : New work (Two or more coat applied

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

23 @ 1.67 ltr/10 sqm over and including priming coat of exterior SQM 78.53 110.04 188.57 125 23571.25
primer applied @ 2.20 kg/10 sqm)
Finishing walls with water proofing cement paint of
24 required shade : SQM 334.34 334.34 150 50151
New work (Two or more coats applied @ 3.84 kg/10 sqm)
Distempering with oil bound washable distemper of
approved brand and manufacture to give an even
25 shade : New work (two or more coats) over and including water SQM 81.89 238.27 320.16 150 48024
thinnable priming coat with cement primer
Painting with synthetic enamel paint of approved brand
andmanufacture of required colour to give an even
26 shade : Two or more coats on new work over an under coat of SQM 21.25 28.16 12.67 62.08 100 6208
suitable shade with ordinary paint of approved brand and
manufacture
Providing precast cement concrete Jali 1:2:4 (1 cement :
2 coarse sand(zone-III) : 4 graded stone aggregate 6mm
nominal size ), reinforced with 1.6 mm dia mild steel
27 wire, including centering and shuttering, roughening SQM 0.27 0.36 0.63 1200 756
cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3
fine sand) etc. complete, excluding plastering of the jambs, sills
and soffits. 50 mm thick
28 Providing Precast cement concrete (1:1.5;3) Manhole Cover Size Nos. 1.00 - - - 1.00 750 750
of 1000 x 1000 x 100 mm
Providing and fixing on wall face unplasticised Rigid PVC
rain water pipes conforming to IS : 13592 Type A,
29 including jointing with seal ring conforming to IS : 5382, leaving 10 Rmt 9.90 13.20 23.10 250 5775
mm gap for thermal expansion, (i) Single socketed pipes. 110 mm
diameter
30 Supply and Fixing of Ball Bearing Pulley for Pump Room Nos. 1.00 - - 1.00

Quantity
S. No. Description of item Unit Pump Staff Boundary Gate Total Rate Amount
House Quantit
15 HP Quarter wall y
Providing and fixing white vitreous china pedestal type
water closet (European type W.C. pan) with seat and
lid, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device
31 (handle lever), conforming to IS : 7231, with all fittings and fixtures Each 1.00 1.00 4000 4000
complete, including cutting and making good the walls and floors
wherever required : W.C. pan with ISI marked white solid plastic
seat and lid
Providing and fixing wash basin with C.I. brackets, 15
mm C.P. Brass pillar taps, 32 mm C.P. brass waste of
32 standard pattern, including painting of fittings and brackets, cutting Each 1.00 1.00 3000 3000
and making good the walls wherever require
33 Providing and fixing C.P. brass bib cock of approved Each 3.00 3.00 300 900
quality conforming to IS:8931 : 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin
34 mixer and geyser points of approved quality conforming to IS:8931 Each - 3.00 - - 3.00 450 1350
15mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with
35 one step CPVC solvent cement and the cost of cutting chases and Mtr 25.00 25.00 225 5625
making good the same including testing of joints complete as per
direction of Engineer in Charge. Concealed work, including cutting
chases and making good the walls etc.25 mm nominal outer dia
Pipes
Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded
36 fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This Mtr 25.00 25.00 225 5625
includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked,
37 with cover and suitable locking arrangement and Per 500.00 500.00 30 15000
making necessary holes for inlet, outlet and overflow pipes but Litre
without fittings and the base support for tank.
Providing and fixing in position pre-cast R.C.C. manhole
38 cover and frame of required shape and approved Nos. 0.00
quality L D- 2.5 Rectangular shape 600x450 mm internal
dimensions
Providing and fixing in position pre-cast R.C.C.
39 Perforated manhole cover and frame of required shape Nos. 0.00
and approved quality Circular shape 500 mm internal diameter

Providing and fixing in position pre-cast R.C.C.

40 Perforated manhole cover and frame of required shape Nos. 0.00
and approved quality square shape 500x500 mm internal diameter

Providing and fixing on wall face unplasticised - PVC

41 moulded fittings/ accessories for unplasticised Rigid Nos. 3.00 5.00 8.00 250 2000
PVC rain water pipes conforming to IS : 13592 Type A,Bend 87.5°
110 mm bend
Providing and fixing M.S clips of approved design
42 to unplasticised - PVC rain water pipes with all necessary fittings , Nos. 10 12 - - 22.00 40 880
complete as per direction of Engineer .
Providing, laying and jointing PVC pipes 110 mm Dia.
43 For drainage,waste water complete as per directionof Engineer . Rmt - 15.00 - - 15.00 250 3750

Providing and fixing PVC ' P ' Or ' S ' trap/Floor Trap in
44 waste/drain pipe with all necessary fittings complete as per Nos. - 3.00 - - 3.00 700 2100
direction of Engineer .

S. No. Description of item Quantity Total Rate Amount

Unit Pump Staff Quarter Boundary Gate Quantit
House 15 wall y
HP

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

45 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink Nos. - 1.00 - - 1.00 4000 4000
as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets, cutting and making good
the walls wherever required Kitchen sink without drain board
610x460 mm bowl depth 200 mm
46 Cement plaster skirting up to 30 cm height, with cement mortar Sqm - 6.12 - - 6.12 250 1530
1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat
cement. 18 mm thick
47 Providing and fixing Ist quality ceramic glazed wall tiles conforming Sqm - 30.81 - - 30.81 1800 55458
to IS: 15622 (thickness to be specified by the manufacturer), of
approved make, in all colours, shades except burgundy, bottle
green, black of any size as approved by Engineer-in- Charge, in
skirting, risers of steps and dados, over 12 mm thick bed of
cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sqm, including pointing in white
cement mixed with pigment of matching shade complete

48 Providing Soak pit of size 1.2mx1.2mx1.8 mtr Each 2 2.00

S.No. Item No. Description Quantity Unit Rate Amount

1 40 Supply of following sizes D.I (D/F) pipes for
rising main/distribution system conforming to
latest/relevant I.S. 8329/2000 Specifications
with all jointing materials such as specials
conforming to latest /relevant I.S.
specifications, suitable for D.I pipes, as per IS-
1239 /2000 and IS 8329/2000 or their latest
amendment including F.O.R. destination and all
taxes and insurance etc. with loading, unloading
at site, as per the instructions of Engineer-in-
charge. including Carting up to site of work,
also including specials for these pipes and
lowering them into the trenches and laying true
to alignment and gradient and jointing etc.
complete including testing of pipe lines and
cutting of pipes for making up the length but
(excluding the cost of trenches, which will be
measured under relevant item of BOQ) all
complete as per instructions of Engineer -in -
charge. (All the pipes and specials including
jointing materials shall be supplied by NCC
free of cost at their Central Stores)

1.1 40.1 300 mm dia K-9 30 RMT 4000 120000

1.2 40.2 250 mm dia K-9 30 RMT 3200 96000
1.3 40.3 200 mm dia K-9 30 RMT 2400 72000
1.4 40.4 150 mm dia K-9 30 RMT 1800 54000
1.5 40.5 125 mm dia K-9 30 RMT 1500 45000
1.7 40.6 100 mm dia K-9 30 RMT 1100 33000
1.8 40.7 80 mm dia K-9 30 RMT 900 27000
1.9 40.8 300 mm dia K-7 30 RMT 3200 96000

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

2 40.9 250 mm dia K-7 30 RMT 2600 78000

2.1 40.10 200 mm dia K-7 30 RMT 2000 60000
2.2 40.11 150 mm dia K-7 30 RMT 1600 48000
2.3 40.12 125 mm dia K-7 30 RMT 1400 42000
2.4 40.13 100 mm dia K-7 30 RMT 1100 33000
2.5 40.14 80 mm dia K-7 30 RMT 1000 30000

2 33 Excavation of earth in ordinary soil (loam, clay

or sand) for pipe line and rising main trenches
including lift upto 1.50 m and lead upto 50 m
and refilling watering, ramming of the
excavated earth into the trench and also
disposal of surplus earth upto 50m from the
center of the trenches including supply of all
material labour, T&P etc complete as per
instructions of Engineer -in -charge.
2.1 34 ordinary soil 100 CUM 225 22500
2.2 35 Mixed soil with Kankar 20 CUM 200 4000
2.3 36 Soft rock 5 CUM 700 3500
2.4 37 Hard rock 5 CUM 850 4250

3 38 Supplying and laying of Sand Bedding - Sand 5 CUM 2000 10000

Bedding in trenches in layers not exceeding 10
cm. in depth, consolidating each deposited
layer by ramming and watering complete as per
instructions of Engineer.

4 42 Supply of the following dia D.I butterfly /sluice

valves, class I, working pressure 10 Kg/cm2
confirming to IS: 780/1969 or its latest
amendments, including valve fittings &
Dismantling Joints as per requirement F.O.R.
destination complete and also including supply
of jointing materials etc. complete .including all
taxes and insurance, as per instructions of
Engineer -in -charge. including Carting of
following D.I (D/F) Valves including valve
fittings from our Central Stores and dismantling
joints as per requirement and lowering them
into the already prepared trenches, fixing in
position and jointing them with pipelines and
testing etc. complete, as per instructions of the
Engineer-in-charge.(All the specials and
fittings along with jointing materials shall
be supplied by NCC free of cost at their
Central Stores)

Sluice valve
5.01 42.1 Sluice valve - 300 mm dia 2 Nos 70000 140000

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

5.02 42.2 Sluice valve - 250 mm dia 2 Nos 60000 120000

5.03 42.3 Sluice valve - 200 mm dia 2 Nos 30000 60000
5.04 42.4 Sluice valve - 150 mm dia 2 Nos 20000 40000
5.05 42.5 Sluice valve - 125 mm dia 2 Nos 15000 30000
5.06 42.6 Sluice valve - 100 mm dia 2 Nos 15000 30000
5.07 42.7 Sluice valve - 80 mm dia 2 Nos 10000 20000
5.08 Sluice valve - 65 mm dia 2 Nos 8000 16000
5.09 Sluice valve - 50 mm dia 2 Nos 7000 14000
Scour valve
5.1 42.8 Scour valve - 80 mm dia 1 Nos 10000 10000
5.11 42.9 Scour valve - 100 mm dia 1 Nos 13000 13000
5.12 42.1 Scour valve - 150 mm dia 1 Nos 20000 20000
5.13 42.11 Scour valve - 200 mm dia 1 Nos 30000 30000
5.14 42.12 Scour valve - 250 mm dia 1 Nos 50000 50000
42.13 Pressure release valve
5.15 42.14 PRV 80 mm dia 1 Nos 60000 60000
5.16 42.15 PRV 100 mm dia 1 Nos 90000 90000
5.17 42.16 PRV 150 mm dia 1 Nos 120000 120000

6 43 Construction of following type chambers as per

department type design and drawing including
fixing of Heavy duty M.S. Manhole Cover (MS
frame with Manhole cover will be supplied
by NCC) and all materials, labour, T&P etc
complete for proper completion of work as per
instructions of Engineer -in -charge.
(Department Type designs are attached
herewith)

6.01 43.1 Sluice valve chamber (masonry Type)

43.2 dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 2 Nos 30000 60000
(H) mm
6.02 43.3 Sluice valve chamber (surface box Type)
dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 1 Nos 20000 20000
(H) mm
6.03 43.4 Fire Hydrant chamber (800 (L) X 1250 (W) X 1 Nos 15000 15000
1000 (H) mm)
6.04 43.05 Air Valve Chamber
43.06 350 (L) x 350 (W) x 500 (H) mm 1 Nos 10000 10000
6.05 43.7 Scour Valve Chamber
43.8 dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 1 Nos 30000 30000
(H) mm
6.06 43.9 PRV Valve Chamber - 1000 (L) x 1200 (W) x 1 Nos 30000 30000
1300 (H) mm

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

7 44.01 Design and construct Thrust Block made in 0.5 CUM 12000 6000
Reinforced Cement concrete (1:1.5:3), with
graded stone chips (20 mm nominal
size)including all the materials excluding
shuttering and reinforcement, as per technical
requirements. (Design and drawing will be
provided by NCC)

8 44.02 Providing and fixing shuttering for Thrust block 2 SQM 450 900
using approved stout props and thick hard
wood planks of approved thickness with
required bracing for concrete works curved or
straight including fitting fixing and striking out
after completion of works.

9 Labour Charges for reinforcement of Thrust 17 KG 250 4250

block for reinforced concrete work including
distribution bars, stirrups, binders etc. initial
straightening and removal of loose rust (if
necessary), cutting to requisite length, hooking
and bending to correct shape, placing in proper
position and binding with wire at every inter-
section, complete as per drawing and direction.
(Reinforcement shall be provided by NCC
free of cost at the Central Stores)

10 11 Providing and installation hydrostatic level 1 Nos 150000 150000

sensor at all tubewell pumping system including
all accessories etc. complete in all respect as
per instructions of Engineer -in-charge.

11 59 Radar type Level transmitter 1 Nos 150000 150000

12 8 Pressure Transmitter 1 Nos 45000 45000

13 9.00 Electrically operated Sluice Valve PN 1.0 dia 1 Nos 150000 150000
100 mm
13.1 9.01 Electrically operated Sluice Valve PN 1.0 dia 1 Nos 150000 150000
150 mm
13.2 9.02 Electrically operated Sluice Valve PN 1.0 dia 1 Nos 200000 200000
200 mm
13.3 9.03 Check Valve PN 1.0 DPCV dia 100 mm 1 Nos 30000 30000
13.4 9.04 Check Valve PN 1.0 DPCV dia 150 mm 1 Nos 60000 60000
13.5 9.05 Check Valve PN 1.0 DPCV dia 200 mm 1 Nos 90000 90000
13.6 9.06 Dismantling Joint PN 1.0 dia 100 mm 2 Nos 4500 9000
13.7 9.07 Dismantling Joint PN 1.0 dia 150 mm 2 Nos 7000 14000
13.8 9.08 Dismantling Joint PN 1.0 dia 200 mm 2 Nos 9000 18000

13.9 9.09 SITC of Chain Pulley Blocks

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

13.10 9.10 1 Tonne 1 Nos 55000 55000

13.11 9.11 2 Tonne 1 Nos 70000 70000

14 48.16 Turbidity & Chlorine analyzer 1 Nos 300000 300000

15.00 48.18 3Mtr. Long Column Pipe

15.01 48.19 32 mm Dia size - MS pipe 2 Nos 1750 3500
15.02 48.2 40 mm dia size - MS pipe 2 Nos 2200 4400
15.03 48.21 50 mm dia size - MS pipe 2 Nos 2650 5300
15.04 48.22 65 mm Dia size - MS pipe 2 Nos 3150 6300
15.05 48.23 80 mm Dia size - MS pipe 4 Nos 4050 16200
15.06 48.24 100 mm Dia size - MS pipe 2 Nos 4550 9100
15.07 48.25 150 mm Dia size - MS pipe 2 Nos 5650 11300

16 20 SITC of Solar power plant (for complete plant ) 12 KW 12500 150000

including solar pannel, Structure, invertor etc.
complete all respect with required material,
T&P labour

17 EI Supply and fixing of solar panel for 2kWp 2 KW 52000 104000

auxiliary loads including installation

18 EI Supply and installation of battery bank 12V, 200 4 Nos 37000 148000
Ah for auxiliary load .

19 EI Spply and fixing of lamp post of 20 W with solar 6 Nos 14500 87000
panel accessories

BOQ FOR DISTRIBUTION SYSTEM

S.No. Description Quantity Unit Rate Amount

1 33.00 Excavation of earth in ordinary soil (loam, clay

or sand) for pipe line and rising main trenches
including lift upto 1.50 m and lead upto 50 m
and refilling watering, ramming of the
excavated earth into the trench and also
disposal of surplus earth upto 50m from the
center of the trenches including supply of all
material labour, T&P etc complete as per
instructions of Engineer -in -charge.
1.1 34.00 ordinary soil 3875 CUM 225 871875
1.2 35.00 Mixed soil with Kankar 100 CUM 260 26000
1.3 36.00 Soft rock 5 CUM 625 3125
1.4 37.00 Hard rock 5 CUM 675 3375
2 38.00 Supplying and laying of Sand Bedding - Sand 50 CUM 1750 87500
Bedding in trenches in layers not exceeding 10
cm. in depth, consolidating each deposited
layer by ramming and watering complete as per
instructions of Engineer.

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

3 50.00 Dismantling of Following type of surfaces

including sorting out and stacking of serviceable
materials and disposal of unserviceable
materials upto a distance of 50m as per
instructions of Engineer -in -charge.

3.1 50.01 B.O.E. surface 500 SQM 98 49000

3.2 50.02 Bituminous surface 120 SQM 195 23400
3.3 50.03 Interlocking Road 200 SQM 225 45000
3.4 50.04 C.C. Road 200 SQM 275 55000
4 51.00 Reinstatement of the following type of road
surface with old and new materials including
supply of all materials, labour, T&P etc.
required for proper completion of the work as
per instructions of Engineer -in -charge.

4.1 51.01 B.O.E. surface (50% of existing bricks to be 500 SQM 450 225000
reused)
4.2 51.02 Bituminous surface 120 SQM 1300 156000
4.3 51.03 Interlocking Road 200 SQM 1250 250000
4.4 51.04 C.C. Road 200 SQM 1250 250000
5 52.00 Provision for following types of Culvert crossing
along the alignment of pipe line complete as per
instructions of Engineer -in -charge. ( casing of
pipe is done by concreting)

5.1 52.01 Nala/Culvert Crossing ( width -3.5 m) upto Dia 2 Nos 10500 21000
300 mm

6 41.00 Supply of following sizes pipes for distribution

system conforming to latest/ relevant I.S.
4984/1995 Specifications with all jointing
materials and specials conforming to latest
/relevant I.S. specifications including F.O.R.
destination and all taxes and insurance etc. with
loading, unloading and Carting up to site of
work, also including specials for these pipes
and lowering them into the trenches and laying
true to alignment and gradient and jointing etc.
complete (including testing of pipe lines and
cutting of pipes for making up the length but
excluding the cost of trenches) all complete as
per instructions of Engineer -in - charge.PE-100
PN-6kg ( All the pipes with specials shall be
supplied by NCC free of cost at their central
stores)

a 63 mm dia HDPE 3670 RMT 115 422050

b 75 mm dia HDPE 10 RMT 135 1350
c 90 mm dia HDPE 270 RMT 200 54000
d 110 mm dia HDPE 270 RMT 225 60750

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

e 125 mm dia HDPE 10 RMT 275 2750

f 140 mm dia HDPE 270 RMT 300 81000
g 160 mm dia HDPE 500 RMT 400 200000
h 180 mm dia HDPE 500 RMT 500 250000
i 200 mm dia HDPE 50 RMT 600 30000

S.No. Description Quantity Unit Rate Amount

Supply and carting upto site of work of the
following dia DI butterfly /sluice
valves, class I, working pressure 10 Kg/cm2
confirming to IS: 780/1969 or its
latest amendments, including valve fittings &
Dismantling Joints as per
requirement F.O.R. destination, and lowering
them into the already
7 42 prepared trenches, fixing in position and jointing
them with pipelines and
testing etc. complete and also including supply
of jointing materials etc. complete .including all
taxes and insurance, as per instructions of
Engineer -in -charge.(All the Valves including
fittings and jointing materials will be
supplied by NCC at Central Stores free of
cost)
42.01 Sluice valve - 300 mm dia Nos Rate only 70000
42.02 Sluice valve - 250 mm dia Nos Rate only 60000
42.03 Sluice valve - 200 mm dia Nos Rate only 30000
42.04 Sluice valve - 150 mm dia Nos Rate only 20000
42.05 Sluice valve - 125 mm dia Nos Rate only 1500
42.06 Sluice valve - 100 mm dia Nos Rate only 15000
42.07 Sluice valve - 80 mm dia Nos Rate only 10000
42.08 Scour valve - 80 mm dia Nos Rate only 10000
42.09 Scour valve - 100 mm dia Nos Rate only 13000
42.10 Scour valve - 150 mm dia Nos Rate only 20000
42.11 Scour valve - 200 mm dia Nos Rate only 30000
42.12 Scour valve - 250 mm dia Nos Rate only 50000
42.13 Pressure release valve
42.14 PRV 80 mm dia Nos Rate only 60000
42.15 PRV 100 mm dia Nos Rate only 90000
42.16 PRV 150 mm dia Nos Rate only 120000

Supply and installation, testing etc. of

single/double ball type air valve
conforming to latest/relevent I.S. specifications
including all taxes and
insurance, carting up to site of work and
lowering them into the trenches,

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

8 42.17 fixing in position and jointing them with pipelines

and testing etc. complete (including supply of
jointing materials and Valve fittings etc
complete) as per instructions of Engineer.

a 42.18 20mm Nos Rate only 11500

b 42.19 50mm Nos Rate only 23000
c 42.20 80mm Nos Rate only 23000
d 42.21 150mm Nos Rate only 46500

Construction of following type chambers as per

department type
design and drawing including fixing of Heavy
duty M.S. Manhole Cover (MS
9 43 frame with Manhole cover will be supplied
by NCC) and all materials, labour, T&P etc
complete for proper completion of work as per
instructions of Engineer -in -charge.
(Department Type designs are attached
herewith)
10 43.1 Sluice valve chamber (masonry Type)
10.1 43.2 dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 6 Nos 32000 192000
(H) mm
43.3 Sluice valve chamber (surface box Type)
10.2 dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 1 Nos 5500 5500
(H) mm
43.4 Fire Hydrant chamber (800 (L) X 1250 (W) X 1 Nos 16500 16500
1000 (H) mm)
10.3 43.05 Air Valve Chamber
10.4 43.06 350 (L) x 350 (W) x 500 (H) mm 5 Nos 9000 45000
43.7 Scour Valve Chamber
10.5 43.8 dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 1 Nos 35000 35000
(H) mm
43.9 PRV Valve Chamber - 1000 (L) x 1200 (W) x 1 Nos 34000 34000
1300 (H) mm

Making house connection should be done

atleast 2 m inside the boundary
wall with provision of tap from distribution line to
outer wall of house, with
supply of 1 m G.I. pipe ( 15 mm ) ( above
ground ) & average 5 mtr. MDPE
11 53 Pipe ( 20 mm) ( below ground) including 305 Nos 3800 1159000
specials, saddle, Tap,etc. of suitable size, T&P
etc. including excavation, laying and jointing for
proper completion of work as per instructions of
Engineer as per Dwg 12 ( including road
restoration)

S.No. Description Quantity Unit Rate Amount

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

15.04 52.07 Road Crossing - Excavation in foundation of

trench of proper size in soil mixed with moorum,
Shingle, Kankar, soft rock, hard rock, including
refilling, dressing and ramming earth or sand or
bajri, ballast, including providing, supply,
carting, lowering, laying and jointing of casing
pipe of RCC NP-3 with appropriate size, with
rubber ring joint, sand filling in gap inside RCC
pipe, insertion of distribution pipe into the
encasing pipe including supply of T&P,
including concrete of 150 mm thick in with
40mm gauge brick ballast local sand and
cement in proportion of 8:4:1, provision for
barricading, labour for traffic diversion etc.
Complete for proper completion of work as per
instruction of Engineer.

15.05 52.08 50 mm dia. Pipe 50 RMT 1650 82500

15.06 52.09 100 mm dia. Pipe 45 RMT 1850 83250
15.07 52.10 150 mm dia. Pipe 30 RMT 2050 61500
15.08 52.11 200 mm dia. Pipe 25 RMT 2250 56250
15.09 52.12 250 mm dia. Pipe 15 RMT 3500 52500
15.1 52.13 300 mm dia. Pipe 10 RMT 4000 40000
15.11 52.14 350 mm dia. Pipe 4 RMT 4500 18000
15.12 52.15 400 mm dia. Pipe 4 RMT 5000 20000
15.13 52.16 450 mm dia. Pipe 4 RMT 5500 22000
15.14 52.17 500 mm dia. Pipe 4 RMT 6500 26000
15.15 52.18 600 mm dia. Pipe 4 RMT 8000 32000

16 42.22 Supply of under ground sluice value type fire 1 Nos 30000 30000
hydrant consisting of 80 mm dia sluice valve,
80mm dia tail pieces, 80mm dia duck foot bend
and 80 mm dia standard makes iron coupling
with cap and etc. complete conforming to
latest/relevent I.S.specifications including all
taxes and insurance up to site of work and
lowering them into the trenches, fixing in
position and jointing them with pipelines and
testing etc. complete (including supply of
jointing materials and Valve fittings
etc.complete as per instructions of Engineer -in -
charge

NCC Limited
SWSM - BAREILLY-
U.P

Schedule of
Quantity for
Proposed Staff
Quarter

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

S.No ITEM DESCRIPTION Unit Qty Tentative Tentative Remarks

Rate Amount
ELECTRICAL WORKS
INTERNAL ELECTRICAL WORKS
1.0 Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded Point
'FR' PVC insulated & unsheathed copper wire (Brand approved by
EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with
1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated &
unsheathed copper wire for ECC, to light/fan/call bell points with
Modular type switch (Brand approved by EIC) fixed on Modular GI
switch board with top cover plate earthing attachment fixed on wall
incl. mending good damages to original finish.

1.01 Average run 4.5 mtr 6 1000 6000 Wire rate:-

1.02 Average run 6 mtr 6 1150 6900 ANCHOR
1.03 Average run 7.5 mtr 2 1250 2500 Conduit &
2.0 Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand Each 6 1400 8400 Modular item:-
approved by EIC) with 6A Modular type switch, without plug top on Anchor
4 Module GI Modular type switch board with 3 Module top cover
plate flushed in wall incl. S&F switch board and cover plate and
making necy. connections with PVC Cu wire and earth continuity
wire etc.
3.0 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket Each 4 1600 6400 Modular item:-
(Brand approved by EIC) with 16A Modular type switch, without Anchor
plug top on 4 Module GI Modular type switch board with top cover
plate flushed in wall incl. S&F switch board and cover plate and
making necy. connections with PVC Cu wire and earth continuity
wire etc.
4.0 Material and labour for Wiring for circuit/ submain wiring along with
earth wire of FRLS PVC insulated copper conductor , single core
cable in surface/ recessed as required.

4.01 2x 2.5 sqmm + 1x1.5 sqmm as ECC Meter 300 220 66000 Wire rate:-
ANCHOR
4.02 2x4 sqmm + 1x2.5 sqmm as ECC Meter 300 300 90000 Wire rate:-
ANCHOR
4.03 2x10 sqmm + 1x6 sqmm as ECC Meter 100 600 60000 Wire rate:-
ANCHOR
5.0 Supplying and fixing of following sizes of medium class PVC
conduit along with the accessories in surface / recess including
cutting the wall and making good the same in case of recessed
conduit as required.
5.01 25 mm Meter 200 115 23000 Conduit &
accessories:-
AKG
5.02 32 mm Meter 50 165 8250 Conduit &
accessories:-
AKG
6.00 Supply & Fixing 240V, Modular Socket (2 Module) type fan Each 1 450 450 Wire rate:-
regulator (Step type) (Brand approved by EIC) on existing Modular ANCHOR
GI switch board with top cover plate incl. making necy.
connections etc.

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

7.00 Supplying & Fixing GI Modular Switch Board of the following sizes
complete top cover flushed in wall for housing the board after
cutting the brick wall incl. making earthing attachment, painting
and mending good damages to building works.

7.01 2 Module Each 2 200 400 Modular item:-

Anchor
7.02 4 Module Each 6 250 1500 Modular item:-
Anchor
7.03 6 Module Each 2 650 1300 Modular item:-
Anchor
7.04 8 Module Each 2 950 1900 Modular item:-
Anchor
8.00 Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required.
8.01 Supply & Fixing 240 V 6 A Modular type switch (Brand approved Each 20 200 4000
by EIC) on existing GI Modular type switch board having top cover
plate and making necessary connections as required.

8.02 15/16 amp switch Each 6

8.03 Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand Each 5 150 750
approved by EIC), without switch & plug top, on existing GI
Modular type switch board with top cover plate and making necy.
connections with PVC Cu wire and earth continuity wire etc.

8.04 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket Each 4 250 1000
(Brand approved by EIC), without plug top and switch, on existing
GI Modular type switch board with top cover plate and making
necy. connections with PVC Cu wire and earth continuity wire etc.

8.05 TV antenna socket outlet Each 1 450 450

9.00 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm Meter 50 45 2250
solid copper conductor PE insulated, shielded with fine tinned
copper braid and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required.
10.00 Supplying & Fixing 240 V AC/DC superior type Multitune (min 10 Each 1 650 650
nos. tune) Call Bell (Anchor) with selector switch for single/Multi
Tunes mode, Battery operated on HW board incl. S&F HW board

LIGHT FITTINGS & FAN

11.00 S & F Light line ultra slim T 5 luminairies 1x 28 watt T5 fitting with Each 10 600 6000 Light :- Philips
decoratiev serrated acrylic diffuser prewired with electronic ballast
including lamp, flexible wire for connection and testing complete all
as specified and directed by Engr-in-Charge.

12.00 Supply and fixing of 1400mm sweep ceiling fan with double ball Each 1 2500 2500 Fan:- Crompton
bearing without conventional regulator, 3' long down rod and
canopy including giving connections etc., complete as specified
and directed by PM. Make Hevells velocity model or its equivalent.

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

NCC Limited
SWSM - BAREILLY-
U.P
Schedule of
Quantity for
Proposed Staff
Quarter

S.No ITEM DESCRIPTION Unit Qty Tentative Tentative Remarks

Rate Amount
ELECTRICAL WORKS
INTERNAL ELECTRICAL WORKS
Supply and fixing of Heavy duty exhaust fan including cost of all
materials and making
hole in wall and civil work finishing, with metalic blades, louvre and
shutters and giving
13.00 connections with flexible copper leads etc complete. AC single Each 2 4500 9000 Fan:- Usha
phase 230/240 volts of size 300 mm,900 RPM sweep with louvers
complete as specified and directed by PM. Make Havells Turbo
force model or its equivalent.

DISTRIBUTION BOARDS
Supplying and fixing double-door SPN MCB Distribution Board with
IP-42/43 protection,
14.0 concealed in wall after cutting the wall & mending good the
damages to original finish
incl. Inter connection with suitable size of copper wire and neutral
link & provision for earthing attachment.
14.01 2+8 way Each 1 1600 1600 Switch gear
Make:-
HAVELLS
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C'
curve, miniature
circuit breaker suitable for inductive load of following poles in the
existing MCB DB
15.0 complete with connections, testing and commissioning etc. as
required.
15.01 Single pole Each 8 400 3200 Switch gear
Make:-
HAVELLS
15.02 Double pole Each 1 650 650 Switch gear
Make:-
HAVELLS
Supplying and fixing single pole, blanking plate in the existing MCB Each 1 20 20 Switch gear
15.03 DB complete etc. as required Make:-
HAVELLS

EARTHING
Material & labour for provision of Earthing complete with
galvanised steel earth plate
electrode 600x 600x 6mm thick, burried directly in ground (earth
pit not less than 1.5m

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

below ground level) with top edge of the plate not less than 1.5m
below normal
ground level, connected to galvanised earth lead 32 6mm by
means of bolts, nuts,
check nuts and washer of galvanised iron or steel and other end
connected to earthing
testing point including funnel with watering pipe of 20mm bore
medium grade
galvanised iron, wire mesh, charcoal or coke and common salt in Each
alternate layers of
16 0 15cm (compacted thickness) all around the earth electrode with 1 15000 15000
concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick precast
RCC M20 nominal mix cover slab of size 450 x450mm reinforced
with 8mm dia TMT bar 10cm C/C and suitable handle of 10mm dia
round bar including necessary excavation, earth work in soft/loose
soil and disposal of spoil to a distance not exceeding 50 m and
necessary testing complete all as shown in Electrical Plate No 3 of
MES SSR part I complete as shown on drawing and as specified
and as directed at site by the PM.

16.01 Providing and laying 8 SWG G.I. wire in recess/surface for Meter 20 31 620
connection etc. complete as required.
TOTAL

NCC Limited

SWSM - BAREILLY-
U.P
Schedule of
Quantity for
Proposed Pump
House

S.No ITEM DESCRIPTION Unit Qty Tentative Tentative Remarks

Rate Amount
ELECTRICAL WORKS
INTERNAL ELECTRICAL WORKS
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded
'FR' PVC
insulated & unsheathed copper wire (Brand approved by EIC) in
20mm size PVC rigid
conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single
core stranded 'FR' PVC
1.0 insulated & unsheathed copper wire for ECC, to light/fan/call bell Point
points with Modular type switch (Brand approved by EIC) fixed on
Modular GI switch board with top cover plate earthing attachment
fixed on wall incl. mending good damages to original finish.

1.01 Average run 4.5 mtr 4 1000 4000 Wire rate:-

1.02 Average run 6 mtr 4 1150 4600 ANCHOR
1.03 Average run 7.5 mtr 4 1250 5000

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand
approved by EIC)
with 6A Modular type switch, without plug top on 4 Module GI
Modular type switch
2.0 board with 3 Module top cover plate flushed in wall incl. S&F Each 4 1400 Modular item:-
switch board and cover plate and making necy. connections with Anchor
PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket
(Brand approved by EIC)
with 16A Modular type switch, without plug top on 4 Module GI
Modular type switch
3.0 board with top cover plate flushed in wall incl. S&F switch board Each 4 1600 6400 Modular item:-
and cover plate and making necy. connections with PVC Cu wire Anchor
and earth continuity wire etc.
Material and labour for Wiring for circuit/ submain wiring along with
earth wire of
4.0 FRLS PVC insulated copper conductor , single core cable in
surface/ recessed as required.
4.01 2x 2.5 sqmm + 1x1.5 sqmm as ECC Meter 200 220 44000 Wire rate:-
ANCHOR
4.02 2x4 sqmm + 1x2.5 sqmm as ECC Meter 150 300 45000 Wire rate:-
ANCHOR
4.03 2x10 sqmm + 1x6 sqmm as ECC Meter 100 600 60000 Wire rate:-
ANCHOR
Supplying and fixing of following sizes of medium class PVC
conduit along with the
5.0 accessories in surface / recess including cutting the wall and
making good the same in case of recessed conduit as required.

5.01 25 mm Meter 100 115 11500 Conduit &

accessories:-
AKG
5.02 32 mm Meter 50 165 8250 Conduit &
accessories:-
AKG
Supply & Fixing 240V, Modular Socket (2 Module) type fan
regulator (Step type) (Brand
6.00 approved by EIC) on existing Modular GI switch board with top Each 1 450 450 Wire rate:-
cover plate incl. making necy. connections etc. ANCHOR
Supplying & Fixing GI Modular Switch Board of the following sizes
complete top
7.00 cover flushed in wall for housing the board after cutting the brick
wall incl. making
earthing attachment, painting and mending good damages to
building works.
7.01 2 Module Each 1 200 200 Modular item:-
Anchor
7.02 4 Module Each 3 250 750 Modular item:-
Anchor
7.03 8 Module Each 1 950 950 Modular item:-
Anchor

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

8.00 Supplying and fixing following modular switch/ socket on the

existing modular plate &
switch box including connections but excluding modular plate etc.
as required.
Supply & Fixing 240 V 6 A Modular type switch (Brand approved
by EIC) on existing GI
8.01 Modular type switch board having top cover plate and making Each 8 200 1600
necessary connections as required.
8.02 15/16 amp switch Each 2 100 200
Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand
approved by EIC),
8.03 without switch & plug top, on existing GI Modular type switch board Each 2 150 300
with top cover
plate and making necy. connections with PVC Cu wire and earth
continuity wire etc.
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket
(Brand approved by EIC),
8.04 without plug top and switch, on existing GI Modular type switch Each 2 250 500
board with top cover plate and making necy. connections with PVC
Cu wire and earth continuity wire etc.
LIGHT FITTINGS & FAN
S & F Light line ultra slim T 5 luminairies 1x 28 watt T5 fitting with
decoratiev serrated
9.00 acrylic diffuser prewired with electronic ballast including lamp, Each 5 600 3000 Light :- Philips
flexible wire for connection and testing complete all as specified
and directed by Engr-in-Charge.
Supply and fixing of 1400mm sweep ceiling fan with double ball
bearing without
10.00 conventional regulator, 3' long down rod and canopy including Each 1 2500 2500
giving connections etc.,
complete as specified and directed by PM. Make Hevells velocity Fan:- Crompton
model or its equivalent.

DISTRIBUTION BOARDS
Supplying and fixing double-door SPN MCB Distribution Board with
IP-42/43 protection,
11.0 concealed in wall after cutting the wall & mending good the
damages to original finish
incl. Inter connection with suitable size of copper wire and neutral
link & provision for earthing attachment.
11.01 2+4 way Each 1 900 900 Switch gear
Make:-
HAVELLS
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C'
curve, miniature
circuit breaker suitable for inductive load of following poles in the
existing MCB DB
12.0 complete with connections, testing and commissioning etc. as
required.

NCC Limited

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

SWSM - BAREILLY-
U.P
Schedule of
Quantity for
Proposed Pump
House

S.No ITEM DESCRIPTION Unit Qty Tentative Tentative Remarks

Rate Amount
ELECTRICAL WORKS
INTERNAL ELECTRICAL WORKS
12.01 Single pole Each 4 400 1600 Switch gear
Make:-
HAVELLS
12.02 Double pole Each 1 650 650 Switch gear
Make:-
HAVELLS

EARTHING
13.0 Material & labour for provision of Earthing complete with Each 1 15000 15000
galvanised steel earth plate electrode 600x 600x 6mm thick,
burried directly in ground (earth pit not less than 1.5m below
ground level) with top edge of the plate not less than 1.5m below
normal ground level, connected to galvanised earth lead 32 6mm
by means of bolts, nuts, check nuts and washer of galvanised iron
or steel and other end connected to earthing testing point including
funnel with watering pipe of 20mm bore medium grade galvanised
iron, wire mesh, charcoal or coke and common salt in alternate
layers of 15cm (compacted thickness) all around the earth
electrode with concrete earth pit in PCC (1:3:6) type C-1, 50 mm
thick precast RCC M20 nominal mix cover slab of size 450
x450mm reinforced with 8mm dia TMT bar 10cm C/C and suitable
handle of 10mm dia round bar including necessary excavation,
earth work in soft/loose soil and disposal of spoil to a distance not
exceeding 50 m and necessary testing complete all as shown in
Electrical Plate No 3 of MES SSR part I complete as shown on
drawing and as specified and as directed at site by the PM.

13.01 Providing and laying 8 SWG G.I. wire in recess/surface for Meter 40 31 1240
connection etc. complete as required.
TOTAL

Construction of R.C.C. Over Head Tank of required capacity and staging above ground level with main
components

S. No. Description of item Unit Quantity Rate Amount

It includes cost of soil testing and assuming bearing capacity of
soil as 8 MT, with supply of design and drawings.All the water
retaining components of OHT shall be casted in M-

30 concrete and minimum grade of concrete of foundation and

staging should be M-25

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

with approved cement, coarse sand and stone grit as per I.S.
11682 and I.S.456Seismic
effects and wind load should be taken into consideration as per
I.S. 1893 for earthquake
resistance and I.S. 875 part-III for wind load on structure and
including 1 M wide RCC
staircase, 1 m wide R.C.C. M30 balcony, M.S. ladder made of
50x50x6 mm angle section
and 20mm plain M.S. bars with hand rails of 20mm medium class
G.I. pipes, One
aluminum ladder inside the tank from top dome to bottom dome,
R.C.C. railing with
20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair
case, supported on
50x50x6mm M.S. angle section, spaced at intervals not more than
1.5m, Proper ventilator
at top dome in circular shape of 1.2 m dia, Water level indicator
fabricated with sensor
1.0 connecting to automation, Lightening conductor as per I.S.S.2309
or its latest amendments of latest electricity rules, consisting of
proper elevation rod with 5 or more fork points as prescribed in
ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm
size with locking arrangement, Supply, fixing, jointing of D.I. D/F
Pipes of appropriate size with D. I.D/F specials conforming to IS
8329/2000 as vertical pipes for inlet, outlet, overflow and washout
as per latest / relevant I.S. specifications with all jointing materials
for proper completion of work, Construction of bed blocks in 1:2:4
PCC with cement, coarse sand and approved stone grit ,
Construction of washout / overflow chamber and chambers for
sluice/ butter fly valves as per departmental type design and
drawing, Supply of 200 mm dia PVC pipe as per I.S.- 4985/2000
for disposal of water from overflow and washout chamber to
suitable point outside the water works compound, Painting of all
concrete surface and steel pipe works with three coats of
approved cement and anti corrosive paints

1.01 50 KI 10 M Staging Job 1950000

1.02 50 KI 12 M Staging Job 1970000
1.03 75 KI 10 M Staging Job 2260000
1.04 75 KI 12 M Staging Job 2290000
1.05 100 KI 12 M Staging Job 2880000
1.06 100 KI 16 M Staging Job 3080000
1.07 150 KI 12 M Staging Job 3260000
1.08 150 KI 16 M Staging Job 3510000
1.09 175 KI 12 M Staging Job 3500000
1.10 175 KI 16 M Staging Job 3660000
1.11 200 KI 12 M Staging Job 3780000
1.12 200 KI 16 M Staging Job 4110000
1.13 200 KI 18 M Staging Job 4195000
1.14 225 KI 12 M Staging Job 4240000
1.15 250 KI 12 M Staging Job 4510000

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

1.16 300 KI 12 M Staging Job 4900000

1.17 300 KI 16 M Staging Job 5700000
1.18 350 KI 14 M Staging Job 6000000
1.19 400 KI 14 M Staging Job 6700000
1.20 400 KI 16 M Staging Job 7100000
1.21 500 KI 14 M Staging Job 7500000

Page 18

BOQ For
EXTERNAL
DEVELOPMENT
WORK near OHT
area for SWSM
water projects

S.No. Item Code Item Description UOM Quantity Rate Remarks

1 24.00 Construction of Interlocking pavement for Sqm. 120 1400 168000
approach to water works, as per departmental
type design and drawing and as per
specifications laid down in the bid document,
including supply of all materials , labour, T&P
etc.required for proper completion of work as
per instructions of Engineer -in -charge.

2 25.00 Construction of granular sub base by providing Cum 10 2300 23000

coarse grade materials, spreading in uniform
layers including watering and compaction
complete.
3 26.00 Construction of WBM by providing grade Cum 12 3100 37200
materials, spreading in uniform layers including
watering and compaction complete.

4 27.00 Earth filling work for proper leveling of water cum 100 350 35000
work site, in accordance with the contour map
and Grid map of existing site enclosed
(Drawing no.D-1), including leveling, dressing,
excavation and filling of earth where necessary
and also including all labour, materials, T&P
etc.required for proper completion of works and
also including carriage of earth from within a
distance of about 8 km. from the site of works
as per instructions of Engineer -in - charge,

5 28.00 Provision for inside semicircular drain 200mm Rmt 100 650 65000
dia including supply of all materials, labour and
T & P etc. complete.

PAGE 3
 PUMP ROOM ASSEMBLY, RISING MAIN AND BYPASS ARRANGEMENT FOR ONE VILLAGE

6 46.00 Water recharge Mechanism for rain water Sqm 8 1150 9200
harvesting with provision of rain water collection
pit within the water works campus as per
drawing attached and direction of EIC.

7 EI Ground Preparation with Manure and Area Sq.m 126 450 56700
Leveling for Plantation along the Boundary
8 EI Plantation of Sedar Plant including Nos 30 450 13500
Maintainence
EI Plantation of Flower Plants (Both Side of Nos 125 450 56250
9 Internal Roads) at 2m Interval including
Maintainence
10 EI Fixing of Display Board size(2 Mtx1Mt) supplied Nos 1 6500 6500
by NCC with required foundation work by
digging trench and concreteing the legs and
finishing as per direction of EIC

PAGE 3