WINDOR INDIA PVT. LTD.
OFFICE NO. 510, TECHNO IT PARK, NEXT TO ESKAY RESORT,
BORIVALI LINK ROAD, BORIVALI (WEST), MUMBAI - 400092.
GSTIN: 27AABCW0329E1ZN
PROFORMA INVOICE
Client Name : ATRI DESIGN STUDIO
Project Name : BIOMATRIX Pvt.Ltd Date : 03-02-2024
Floor No. : GROUND FLOOR Proforma Invoice No. : 0152/23-24 - Rev-01
Sr. HSN /SAC
Product Description Unit Quantity Rate Amount
No. code
WINDOR MODULAR SINGLE GLASS PARTITION
1
SYSTEM
Providing and Fixing WINDOR make Modular single
glass partition SLENDER-25MM x 50MM system at
Top, bottom and sides, Including 10MM Clear
toughened glass, Including Gasket & Glass to glass
vertical I, T & L joints to be stick by VHB tape, The 99547 Sq.ft. 970.00 365.00 3,54,050.00
profile will be 10-12mm Microns (Wood Finish
Powder Coating) Sound Transmission Loss of 32 DB
approx.
Full height - 2400MM
SINGLE LEAF - GLASS STYLE DOOR,
2 -
WITH WINDOR HARDWARE
Providing and Fixing with WINDOR Modular Single
Leaf STYLE Door - (Wood Finish Powder Coating)
100MM x 42MM with 10MM Clear toughened glass
with WINDOR Door Hardware - Pelmet Arm Door
Closer - hold open unit WDCS-2000, Offset Handle
22MM x 300MM WPHQ-2212 (S), Dead Lock with
Cylinder WDBS and WCKN-70MM (1 Side key 1 side
knob), Door Hinges 5" 5x3x3MM WDH533-BTF (4
99547 Nos. 2 34,900.00 69,800.00
Nos.), Automatic Drop Down Seal WADS-001,
Including Aluminium Modular Door Frame, WINDOR
Make - SLENDER-25MM x 50MM profile, with Door
Jam (Datta Patti) and Gasket (Wood Finish Powder
Coating)
Size : 1000MM X 2400MM
(Hardware will be Silver/Black)
Location : Directors Cabin
SINGLE LEAF - GLASS DOOR, WITH WINDOR PATCH
3 -
FITTING HARDWARE
Page 1 of 3
Sr. HSN /SAC
Product Description Unit Quantity Rate Amount
No. code
Providing and Fixing PATCH FITTING DOOR with
12MM Clear toughened glass - with WINDOR Glass
door hardwares - Top Patch WPF-101, Bottom Patch
WPF-102, Lock WPF-105, Pivot WPF-110, Floor Spring
WFS-520, H-Type 25MM x 450MM Handle WPHH-
2518(S), Half moon Door Stopper WDSHR 99547 Nos. 12 21,500.00 2,58,000.00
Including Aluminium Modular Door Frame, WINDOR
Make - SLENDER - 25MM x 50MM system with
SLENDER - 5MM x 50MM END Cap
Size : 1000-1050MM X 2400MM
(Hardware will be Silver/Black)
DOUBLE LEAF - GLASS DOOR, WITH WINDOR PATCH
4 -
FITTING HARDWARE
Providing and Fixing PATCH FITTING DOOR with
12MM Clear toughened glass - with WINDOR Glass
door hardwares - Top Patch WPF-101, Bottom Patch
WPF-102, Lock WPF-105, Pivot WPF-110, Floor Spring
WFS-520, H-Type 25MM x 450MM Handle WPHH-
2518(S), Half moon Door Stopper WDSHR 99547 Nos. 3 35,000.00 1,05,000.00
Including Aluminium Modular Door Frame, WINDOR
Make - SLENDER - 25MM x 50MM system with
SLENDER - 5MM x 50MM END Cap
Size : 1800MM X 2400MM
(Hardware will be Silver/Black)
Providing and Fixing PATCH FITTING DOOR with
12MM Clear toughened glass - with WINDOR Glass
door hardwares - Top Patch WPF-101, Bottom Patch
WPF-102, Lock WPF-105, Pivot WPF-110, Floor Spring
WFS-530, H-Type 25MM x 450MM Handle WPHH- 99547 Nos. 1 32,000.00 32,000.00
2518(S), Half moon Door Stopper WDSHR
(WITHOUT DOOR FRAME)
Size : 2400MM X 2400MM
(Hardware will be Silver/Black)
5 Transportation, Loading & Unloading charges 9967 Nos. 1 25,000.00 25,000.00
TOTAL 8,43,850.00
ADD: CGST @ 9% 75,946.50
ADD: SGST @ 9% 75,946.50
ROUND OFF -
GROSS AMOUNT 9,95,743.00
NOTE :-
Payment Terms : 40% ADVANCE AGAINST PROFILE & HARDWARE, 40% BEFORE DELIVERY OF GLASS & 20% AFTER
1
COMPLITION OF WORK BEFORE KEY HANDOVER.
2 Advance payments Value will be on Proforma Invoice Value OR Purchase Order Value.
a) For Glass Partition Complete set of Glass, Profile / Panels & Installation work will be done compulsary by WINDOR.
3 b) For STYLE Doors & Frameless Glass Doors Complete set of Glass, Hardware, Profile & Installation work will be done
compulsary by WINDOR.
4 Validity of Quotation : 7 Days from the date of this quotation, Because of high volatility in glass & aluminium prices.
5 Retension Payment Terms : No Retension amount.
Page 2 of 3
Sr. HSN /SAC
Product Description Unit Quantity Rate Amount
No. code
Quantity mentioned in BOQ are approximate. Actual sizes may vary as per site condition.
6
Billing shall be done as per actual site measurement.
7 key Handing over : Key Handing over will be done after the final payments.
8 Mathadi Charges at Client's Scope
9 Electricity will be provided by Client at site free of cost
10 Breakage of glass after handover is under client's scope
11 Floor cut out for Installing floor spring will be under client's scope.
12 Any Carpentry or Civil Work at the site will be under the client’s scope.
13 Glasses Cleaning Work after installaion will be under the client’s scope
14 Lift to be provided for material shifting.
Delivery Schedule : 15-20 days after receiving PO and advance for Profile & Glass delivery will be done after 1 week
15
after installation of Profiles at site And advance payment.
Bank Details :
HDFC BANK LTD, BORIVALI (EAST) BR., Current A/C No. 50200052817597 IFSC: HDFC0001106,
GSTIN : 27AABCW0329E1ZN
Page 3 of 3
