joint /joint thick TILE FIXING

Cementitious tile grout

PRODUCT
joint and joint thick are cement-based pre-mixed
compressible grouts used for filling tile joints in wet and dry
areas. They are water resistant, easy to apply, and can be
cleaned easily.They are thixotropic, crack-free, non-slump
grouts that only need to be mixed with water and have good
adhesion to tile’s sides. Available in a wide range of attractive
colors (please consult our color chart board).

SCOPE OF USE
joint / joint thick are suitable for walls and floors
for internal and external applications, including:
• Wet areas (like bathrooms and kitchens)
• Stairs
• Rooms
joint / joint thick are available for two types of tile
joints: PACKAGING joint
• joint: joints from 1.5 to 4 mm wide. Leb Syria Jordan UAE Qatar Kuwait KSA Oman
• joint thick: joints from 4 to 10 mm wide. 5 Kg - 5 Kg 5 Kg 5 Kg 5 Kg 10 Kg 5 Kg
Expansion joints in walls and floors should be filled with an - - 20 Kg 20 Kg 20 Kg 20 Kg 20 Kg 20 Kg
appropriate sealant like  jointseal PU or  seal PS
1000 PG/GG. PACKAGING joint thick
CHARACTERISTICS Leb Syria Jordan UAE Qatar Kuwait KSA Oman
Appearance Powder 25 Kg - 25 Kg 25 Kg 25 Kg 25 Kg 25 Kg 25 Kg
Density 1.9 Kg/L
Composition Cement, mineral charges,
hydrophobic agent, synthetic
organic polymers, pigments
Color 29 colors in the Near East
23 colors in the Gulf & KSA
Pot Life 2 hrs at 20°C
Shelf Life 12 to 24 months depending
on packaging and country
Mixing Ratio joint 5 to 6.4 lit. / 20 kg bag
approx.1.3 to 1.65 lit/5 kg bag
joint thick 4.5 to 5 lit. / 25 kg bag
Service Temperature -20°C to +70°C
Total Volatile Organic None (<5g/l) -
Compounds (VOC) (EPA Method 24)
*mixing ratios may slightly defer depending on region of production.
Exact mixing ratio is indicated on product package.

TEST RESULTS (joint)

Test results as per EN 13888:2009 - joint (Unsanded) Results Standard requirements for
type CG 1
Flexural Strength as Per EN 12808-3:2002 (N/mm²) ≥ 3.5 ≥ 3.5 N/mm²
Compressive Strength as per EN 12808-3:2002 (N/mm²) ≥ 15 ≥ 15 N/mm²
Abrasion Resistance as per EN 12808-2:2002 (mm³) ≤ 600 ≤ 2000 mm3
Water Absorption after 30 min as per EN 12808-5 (g) ≤5 ≤5g
Water Absorption after 240 min as per EN 12808-5 (g) ≤ 10 ≤ 10 g
Shrinkage as per EN 12808-4 at 28 days standard conditions (mm/m) ≤3 ≤ 3 mm/m

1/3 Technical data sheet . Edition: 01.23-A www.middleeast.weber

joint /joint thick TILE FIXING

TEST RESULTS (joint thick)

Test results as per EN 13888:2009 - joint thick (Sanded) Results Standard requirements for
type CG 1
Flexural Strength as Per EN 12808-3:2002 (N/mm²) ≥ 3.5 ≥ 3.5 N/mm²
Compressive Strength as per EN 12808-3:2002 (N/mm²) ≥ 15 ≥ 15 N/mm²
Abrasion Resistance as per EN 12808-2:2002 (mm³) ≤ 500 ≤ 1000 mm3
Water Absorption after 30 min as per EN 12808-5 (g) <5 <5g
Water Absorption after 240 min as per EN 12808-5 (g) < 10 < 10 g
Shrinkage as per EN 12808-4 at 28 days standard conditions (mm/m) ≤3 ≤ 3 mm/m

APPLICABLE STANDARDS PRODUCT PREPARATION

ANSI A118.6 & 118.7 Mix 20 kg of joint with 5 to 6.4 Lit. of clean cool water (or
ASTM C109: 95 a 5 kg bag with around 1.3 to 1.65 Lit of water depending on
BS 1881, Part 207 site condition), or 25 kg of joint thick with 4.5 to 5 Lit. of
EN 13888:2009 water.
The amount of mixing water must be respected to avoid
efflorescence over the surface of the grout.
INSTRUCTIONS FOR USE
An electric mixer with low rotation speed (< 300 rpm) can be
PRECAUTIONS
used.
Before grouting with weberjoint/weberjoint thick, make sure
Mix until a uniform lump free paste is obtained. Let the paste
that the adhesive has completely dried; it will depend on site
rest for a few minutes before starting the application.
and weather conditions.
- 24 hours minimum after standard tile adhesives application
PRODUCT APPLICATION
(col flex, col plus, col fix, etc...)
Apply joint / joint thick with a rubber spatula into
- 4 hours minimum after fast-setting tile adhesives application
the joints by filling all the gaps, make sure that the product is
(col fast, col F1, col flex FS)
well compacted with no voids.
- 14 days minimum after tiling with traditional "site-mix"
Avoid grouting in hot (mid-day under direct sun light) or
mortar on floors (minimum 3 days for walls)
windy or too dry environments, it is rather advised to grout
- Some tiles with a matt or porous texture are prone to
in the morning or afternoon hours during the Summer
surface staining when coloured grouts are used. It is
season.
recommended to check that no stain will occur by testing
on small surface before starting the whole job.
Cleaning of joint surfaces
When the grout begins to dry (10 or 20 minutes depending
SURFACE PREPARATION
on the weather condition) start the cleaning process,
The grooves between all external and internal ceramic
remove surplus with a damp sponge moving diagonally to
surfaces to be grouted must be sound and thoroughly
prevent removal of grout within the joints. Rinse the sponge
cleaned before the application of the product. All traces of oil
frequently using two water containers, one to remove the
or grease must be removed.
grouts residue and the other one to clean the sponge. Avoid
All loose particles of mortar or tile adhesive in the groove
excess of water while cleaning to prevent discoloration of
must be physically removed (joints should be emptied to at
joints. When dry, polish the tiles with a clean, dry cloth.
least 2/3 of the tile thickness).
Do not spray water under high pressure and avoid using any
The gap between tiles should not exceed 4mm for
chemical cleaning agent on the grout until 3 days after the
joint, and 10mm for joint thick.
application.

2/3 Technical data sheet . Edition: 01.23-A www.middleeast.weber

joint /joint thick TILE FIXING

CURING area, and to wear protective gear for hands, eyes and
When grouting in hot or windy or dry weather conditions respiratory system and to avoid breathing of the dust.
which may persist for the coming days, it is advisable to Splashes on the skin should be washed away by cleaning
cure the joints by lightly dampening them with clean water thoroughly with soap and water. In case of contact with
the second day after grouting, making sure not to contami- eyes, wash thoroughly with clean water and seek medical
nate or stain the grouted joints in the process. attention. If swallowed, do not induce vomiting and seek
medical attention. The product is non-flammable.
CONSUMPTION
Examples of consumption (in kg/m2): DISCLAIMER
While the company guarantees its products against defective
Joint width
Tile size (mm) 2 4 6 10 materials, the use and application of these products are
(cm)
made without guarantee since the conditions of their application
2.5 x 2.5* 2.30 - - - are beyond its control. It is recommended to verify with the
15 x 15 0.38 0.77 1.15 1.92 company that the product is suitable for the intended use,
30 x 30 0.19 0.38 0.58 0.96 and that this Data Sheet version is the latest one. The company
60 x 60 0.10 0.19 0.29 0.48 may modify it without prior notice. Technical characteristics
Indicative consumptions calculated with a tile thickness of are listed for guidance only. For more information, please
8mm contact the company’s office in your location.
* In the case of mosaics with a size of 2.5 x 2.5 cm, the tile
thickness of 5mm was used to calculate the consumption. NOTE
These values only give an indication about the grout The information included on this Technical Data Sheet is the
consumption sole property of SODAMCO Holding. The unauthorized disclosure,
The real product consumption can differ depending on site use, dissemination or copying (either whole or partial) of this
conditions and wastage when grouting. data sheet or any information it contains, is prohibited and
subject to legal pursuit.
This formula does not include application wastage

TILE GROUT CONSUMPTION FORMULA:

C = 0.18 x E x H x [(L + W) / (L x W)]
C : Consumption (kg/m²)
E : Joint Width (mm)
H : Tile Thickness (mm)
L : Tile Length (cm)
W : Tile Width (cm)

CLEANING
Clean the tools with water after use. Cured materials can
only be removed mechanically.

STORAGE
12 or 24 months depending on packaging after manufactur-
ing date in original and non-open packaging , under cover, in
dry condition, away from humidity, protected from extreme
temperatures and direct sunlight.

SAFETY PRECAUTIONS
The product contains cement powders which, when mixed
with water, release alkalis that could be harmful to the skin. It
is preferable that the application be done in a ventilated

3/3 Technical data sheet . Edition: 01.23-A www.middleeast.weber