AUDIO AND CONNECTIVITY
Models with Display Audio
System Updates
The audio system’s firmware can be updated with a Wi-Fi connection, or with a
USB device.
n How to Update Wirelessly
Wireless connection mode setup
If your vehicle has a telematics
control unit (TCU), you do not need
the wireless connection mode setup.
1. Press the HOME button, then
select System Updates.
2. Select Settings, then select
Connection Setup.
3. Select Wi-Fi, then select Change
Mode.
4. Select Network, then select
Confirm.
The display returns to the network
list.
5. Select an access point from the
network list, then select Save.
If the audio system requires a
password, enter a password.
AUDIO AND CONNECTIVITY
n How to Update
When the audio system update is Notification
available, the notification is shown
on the audio/information screen. Use
the following procedure to update the
system:
1. Press the HOME button.
2. Select System Updates.
3. Select via Wireless. If a
notification is displayed on the
screen, the screen of step 5 will be
displayed.
4. Select Download Now. A
notification appears on the screen.
5. Select Install Now or Install while
Vehicle OFF. A notification appears
on the screen if the update is
successful.
For battery protection, Install while vehicle OFF cannot be selected when
the battery is low on power. If you want to install the updated data, recharge
the battery or select Install Now.
*if equipped
AUDIO AND CONNECTIVITY
How to Update with a USB Device
Download the update files from the
server.
30 Press the HOME button, then
select System Updates.
40 Select via USB. A notification
appears on the screen.
50 Connect a USB device into the
USB port in the center pocket
or console compartment. (see p.
The inventory data is copied
into the USB device.
60 Remove the USB device from the
USB port.
70 Connect the USB device into your computer and download the update"
files. Follow the link to download the required software update files. See"
https://usb.honda.com for more details.
Install the update
1. Press the HOME button, then select
System Updates, and then via USB.
A notification appears on the screen.
2. Connect the USB device with the
update files to the USB port.
A notification appears on the
screen.
3. Select Install Now. A notification appears on the screen if the update is
successful.
Notes
• Honda recommends using a flash drive with a minimum of 8 GB of free
space or more.
• Be sure to delete any previous inventory or update files from the USB
before starting the USB update process.
