ADOPTING SCHEDULE OF RATES 2022-23 effect from 19.07.

2022
RATES OF LABOUR

Sch. Item
Sl. No. Description Unit Rate
No.

SEMI SKILLED CATEGORY

1 2 Axe Mazdoor Day 608.00

2 4 Blacksmith - I Class Day 769.00

3 4A Blacksmith - II Class Day 738.00

4 5 Boat Mazdoor Day

5 8 Bullocks pair with driver (with bandy) Day 1204.00

6 8A Bullocks single with driver (with bandy) Day 866.00

7 11 Carpenter - I Class Day 976.00

8 12 Carpenter - II Class Day 932.00

9 13 Caulker Day

10 15 Cleaner - First Grade Day 519.00

11 15A Cleaner - Second Grade Day 513.00

12 18 Ferry Mazdoor Day

13 19 Fitter - I Class Day 881.00

14 19A Fitter - II Class Day 856.00

15 20 Fitter (Pipe Laying / Bar bending) I Class Day 866.00

16 20A Fitter (Pipe Laying / Bar bending) II Class Day 839.00

17 21 Floor Polisher Day 769.00

18 22 Gardener Day 608.00

19 25 Hammer Mazdoor Day 618.00

20 26 Head Mazdoor for Well Sinking Day

21 27 Driver (Light Duty) Day 769.00

22 27A Driver (Heavy Duty) Day 820.00

23 28 Jumper Mazdoor Day 608.00

24 36 Maistry, Road Inspector & Work Inspector Day 740.00

Maistry, Road Inspector &

25 36A Day 820.00
Work Inspector (Degree Holder)

26 37 Mason for Brick Work - I Class Day 999.00

27 37A Mason for Brick Work - II Class Day 932.00

28 38 Mason for Stone Work - I Class Day 999.00

29 38A Mason for Stone Work - II Class Day 932.00

30 39A Mazdoor - I Class Day 651.00

31 39B Mazdoor - II Class Day 534.00

32 39C Head Mazdoor Day 674.00

33 40 Mechanic - I Class Day 769.00

34 40A Mechanic - II Class Day 738.00

35 42 Mopla - I Class Day

36 42A Mopla - II Class Day

37 43 Navagonies or Javali Man - I Class Day

38 44 Painter / Varnisher - I Class Day 797.00

39 44A Painter / Varnisher - II Class Day 772.00

41 47 Plumber - I Class Day 866.00

42 47A Plumber - II Class Day 839.00

43 48 Pump Driver Day 674.00

44 52 Sawyer Day 708.00

45 54 Smith - I Class Day 766.00

46 54A Smith - II Class Day 738.00

47 55 Sprayer Mazdoor (for bitumen, tar etc.,) Day 817.00

48 56 Stone Cutter - I Class Day 766.00

49 56A Stone Cutter - II Class Day 738.00

50 58 Syrang - I Class Day 766.00

51 58A Syrang - II Class Day 738.00

52 60 Thatcher Day 644.00

53 62 Tinker - I Class Day 618.00

54 62A Tinker - II Class Day 608.00

55 63 Turner - I Class Day 708.00

56 63A Turner - II Class Day 674.00

57 64 Time Keeper - I Class Day 766.00

58 64A Time Keeper - II Class Day 738.00

59 67 Welder / Bracer - I Class Day 766.00

60 67A Welder / Bracer - II Class Day 738.00

61 68 Well Diver for removing silt-I Class Day

62 68A Well Diver for removing silt-II Class Day

63 69 Well Sinker - I Class Day

64 69A Well Sinker - II Class Day

Well Sinking Diver working with Helmet

65 70 Day
(above two metres depth of water)

66 72 Wodder Day 644.00

Highly skilled category Technical Assistant

67 76A Technical Assistant-Grade-I (B.E. Passed) Day 1216.00

Technical Assistant-Grade-II
68 76B (Diploma in Engineering Passed / B.E. Failed / Day 1096.00
Degree in Geology for Ground water works)

Technical Assistant-Grade-III
69 76C (Diploma in Engineering Failed / Day 926.00
I.T.I (civil) Passed

70 76D Cinema Operator (I.T.I. Passed) Day 763.00

71 76E B.Sc., (Agriculture) Passed Day 1096.00

Laboratory Assistant-Grade-I
72 77A Day 926.00
(Post Graduate in Science)

Laboratory Assistant-Grade-II
73 77B (Degree in Science / Day 849.00
Degree in Geology for Ground water)

Laboratory Assistant-Grade-III
74 77C Day 763.00
(With Degree Qualifiacation to work as works clerk)

75 78A Mazdoor employed for Geological maping Day 652.00

Mazdoor employed for Pitting, Trenching, Sampling

76 78B Day 652.00
and Drilling works

Mazdoor employed for Geophysical investigation

77 78C Day 652.00
works

78 78D Head Mazdoor to Supervise exploratory works Day 688.00

79 79 Mixer Operator (including concrete mixer) Day 708.00

80 80 Mixer Driver Day 674.00

81 81 Compressor Operator Day 677.00

Computer Operator-Grade-I
82 89A [B.E. (Computer Science) / Day 1216.00
M.Sc., (Computer Science)]

Computer Operator-Grade-II
83 89B [B.Sc. (Computer Science) / Day 1096.00
Diploma in Computer Science]

Irrigation Community Organaiser - Grade-I

84 90A [B.E. (Agri) Passed / B.Sc. (Agri) Passed / Day
P.G. (Geology) & Rural Development]
 Irrigation Community Organaiser - Grade-II
85 90B [B.E. (Agri) Failed / B.Sc. (Agri) Failed / Day
Diploma in Agri. Passed]

86 95 Heatmaster Operator Day 851.00

87 96 Raker Day 851.00

88 97 Geological Assistant Day 947.00

89 98 Stone & Crusher Operator Day 677.00

90 99 Heavy Mazdoor Day 708.00

Electrical Workers

91 100 Wireman Grade-I / Electrician Grade-I Day 826.00

92 101 Wireman Grade-II / Electrician Grade-II Day 820.00

93 102 Electrical Helper Day 644.00

94 103 Lift Operator Day 740.00

95 104 Laboratory Attendant Day 551.00

96 105 Sound Service Operator Day 618.00

97 106 Electrical Maistry Day 947.00

RATES OF OTHER CONSTRUCTION MATERIALS

Sl. No. Name of Material Unit Rate

1 Water proofing compound Kg 42.70

2 Mild Steel Flats of all sizes Kg 52.10

3 Mild Steel Square Rods of all sizes Kg 52.10

4 First Quality Design Ceramic tiles of All colours

i 305 mm x 305 mm x 6 mm Each 49.00

ii 200 mm x 200 mm x 6 mm Each 21.50

iii 200 mm x 100 mm x 6 mm Each 11.60

5 First Quality Plain ceramic tiles of all colours

i 305 mm x 305 mm x 6 mm Each 35.15

ii 200 mm x 200 mm x 6 mm Each 15.70

iii 200 mm x 100 mm x 6 mm Each 8.00

6 First quality White glazed tiles

i 150 mm x 150 mm x 6 mm Each 8.30

ii 100 mm x 200 mm x 6 mm Each 7.25

7 First quality colour glazed tiles

i 150 mm x 150 mm x 6 mm Each 9.65

ii 100 mm x 200 mm x 6 mm Each 8.30

8 First quality colour glazed tiles with printed design

i 150 mm x 150 mm x 6 mm Each 11.40

ii 100 mm x 200 mm x 6 mm Each 10.25

9 White Cement Kg 22.60

10 Colour Cement (White cement mixed with colouring Kg 27.25

pigments)

11 Multi-colour marble chips of all Grades / Sizes Bag 91.10

12 White Marble slab (Adanga) 18 mm to 20 mm thick

i 4'0'' x 2'0'' and above sq.m. 1403.00

ii 2'0'' x 2.0" or 2'0" x 1'0" or 1'0" x 1'0" sq.m. 700.00

13 Granite tiles - (Superfine polished with Machine cut
edges) of size 2'0" x 1'0" or 1'0" x 1'0" or 1'0" x
0'6", of 10 mm thick

a Jet Black sq.m. 886.00

b Ruby Red, Raw Silk sq.m. 793.00

c Sinthetic Grey, Paradise and Similar varieties. sq.m. 749.00

14 Granite slabs (Super fine polished with machine cut

edges) of sizes 4'x2' and above 18mm to 20mm
thick.
a Jet Black sq.m. 1737.00

b Ruby Red, Raw Silk sq.m. 1626.00

c Sinthetic Grey, Paradise and Similar varieties. sq.m. 1462.00

15 Polished shahabad stone slabs of 20 mm thick with sq.m. 376.00

machine cut edges of size 2' 0" x 2'0" and above.

16 Polished shahabad stone slabs 20 mm thick with sq.m. 318.00

machine cut edges of size below 2' 0" x 2'0".

17 Polished Rajasthan Kota stone slabs of 20 mm thick sq.m. 550.00

with machine cut edges of size 2' 0" x 2'0" and
above.

18 Polished Rajasthan Kota stone slabs of 20 mm thick sq.m. 484.00

with machine cut edges of size below 2' 0" x 2'0".

19 Dolphur stone slabs - semi polished with machine

cut edges of all sizes

a 40 mm thick sq.m. 420.00

b 20 mm thick sq.m. 381.00

20 Aluminium strips of size 40 mm wide x 1.5 mm RM 36.60

thick

21 Brass strips of size 40 mm wide x 1.5 mm thick RM 69.15

22 Glass strips of size 40 mm wide and 4 mm thick RM 15.65

23 Marblex Tiles 3 mm thick sq.m. 696.00

24 Red Oxide - Superior quality for floor finish Kg 145.20

25 Decorative pressed tiles of 12 mm thick of all sizes sq.m. 1075.00

and shapes

26 Exterior Emulsion Paint - Water based primer Litre 151.30

(Liquid)

146 Exterior Emulsion Paint Litre 303.80

27 Alkali Resistant Distemper Primer Litre 135.60

28 Sandtex matt Litre 158.00

29 Vinaratex or equivalent Textured coat sq.m. 203.90

30 Best Lac Polish / French Polish Litre 264.10

31 Varnish Litre 271.20

32 Cotton Waste Kg 10.40

33 Cement based Hydraulically pressed Anti skid tiles sq.m. 525.00

(pattern design) - 20 mm thick

34 Marble Powder Kg 4.54

35 Polishing Stone

i Rough Each 67.00

ii Medium Each 89.50

iii Fine / Nice Each 102.70

36 Oxalic Acid Kg 38.75

37 Tupentine Litre 23.70

38 Mansion polish 400 gram 149.15

39 Poly Sulphide Kg 177.00

40 Primer for expansion joints Kg 152.20

41 Filler material sq.m. 145.20

42 Bond Breaker RM 3.73

Bentonite powder for construction quality Kg 6.05

43 PVC Water Bar 150mm wide with singel bulb RM 299.80

44 Plain G.I. sheet 0.8mm thick (22 Gauge) sq.m. 364.60

45 Phil Plug Each 5.05

46 G.I. Screws

i 30mm x 6mm Each 1.28

ii 19mm x 6mm Each 0.81

47 G.I. Limpet / Cup Washers Each 1.89

48 Bitumen washers 15mm dia Each 1.13

49 Asbestos Cement pipe - 100mm dia 3 RM 144.10

50 A.C. shoe - 100mm dia Each 45.70

51 A.C. Bend - 100mm dia Each 52.30

52 A.C. Cylindrical Cowl - 100mm dia Each 78.45

53 C.I. Brackets for A.C. pipe 100mm dia Each 20.05

54 C.I. Grating - 100mm dia Each 32.10

55 Asbestos cement fully corrugated sheet - 6mm sq.m. 189.65

thick

56 Asbestos cement plain sheet

i 6mm thick sq.m. 170.15

ii 4mm thick sq.m. 117.85

57 Asbestos cement adjustable ridges Pair 196.45

58 G.I. "J" or "L" Bolts with nuts 6mm Dia Each 3.91

59 Steel - special extruded sections for steel windows Kg 69.60

and ventilators conforming to I.S.S. 7452 / 1990
including Fabrication charges

60 CRCA pressed steel Box section 18 Gauge or

1.25mm thick for Door frames including providing
holes and fixing wooden blocks for fixing furniture
and fittings

a With one coat of Red oxide priming coat. RM 360.00

b With powder coated primer RM 383.80

61 Aluminium extruded sections (for Doors, windows,

ventilartors, partitions, false ceiling etc.) including
charges for Anodising for 15 micron thickness -

a Natural colour matt finish. Kg 325.00

b With powder coating of any colours. Kg 347.70

62 Alumninum Extruded Box Section for Staircase Kg 390.90
Hand Rails including charges for Adnodising for 15
micron thickness - Natural colour matt finish

63 Rubber beading for aluminium glazed doors RM 38.25

64 Rubber beading for aluminium glazed windows. RM 29.05

65 PVC / Woollen felt for aluminium doors 6mm thick RM 7.95

66 Pivot for Aluminium Door Set 160.70

67 Hydraulic Door closer of various sizes of approved Each 1008.00

quality using Aluminium Extruded section body
tubular type universal hydraulic door closer with
double speed adjustment like HARDWYN (make)
'GAZEL' (or) equivalent (with ISI Monogram)

68 Hydraulic Floor springs of various sizes double Each 2095.00

acton hydraulic floor sping of approved quality,
brand, manufacture asper BIS standards for doors
including cost of cutting floors as required,
embedding in to floors and Stainles Steel Cover
plates with Aluminium Pivet and single piece M.S.
sheet outer box with side plate etc., capaple of
taking upto 130 Kg. weight from door shutter, like
HARDWYN make (U-32) or its euivalent with ISI
monogram.

69 Lock for Aluminium doors Each 284.50

70 Lock for Aluminium sliding windows Each 71.10

71 Aluminium Grill of standard pattern (diamond sq.m. 2079.00

shape) - 10mm thick including 'F' (or) 'H' Section.
72 Aluminium Grill of standard pattern (diamond sq.m. 1679.00
shape) - 6mm thick including 'F' (or) 'H' Section.

73 Bolts and Nuts 10mm dia for false ceiling Each 5.65

74 Rawl Plugs for false ceiling Each 9.50

75 PVC Roller for sliding windows Each 14.60

76 Synthetic Resin - Fevicol or equivalent (Phenol Kg 199.75

Formal Dehide based Resin)
77 Butt Hinges with nylon washers of various sizes.
Length and width (with required screws).

a 125mm x 30mm Each 89.60

b 100mm x 30mm Each 71.90
c 75mm x 30mm Each 49.35
d 50mm x 30mm Each 39.85
78 Tower Bolts of various lengths and diameter (with
required screws)

a 400mm long and 12mm dia Each 169.60

b 300mm long and 12mm dia Each 130.50
c 250mm long and 12mm dia Each 97.85
d 200mm long and 12mm dia Each 82.25
e 150mm long and 12mm dia Each 64.80
f 100mm long and 10mm dia Each 57.00
g 75mm long and 10mm dia Each 39.70
79 Aldrops of following lengths and diameter with
required screws, bolts and nuts.
a 300mm long and 16mm dia Each 209.90
b 250mm long and 16mm dia Each 181.00
c 200mm long and 16mm dia Each 122.50
d 200mm long and 12mm dia Each 101.60
80 Handles "D" type of various sizes with required
screws

a 200mm long Each 64.25

b 150mm long Each 57.65
c 100mm long Each 35.30
81 Ornamental handles of various sizes with required
screws

a 200mm long Each 165.80

b 150mm long Each 110.40
c 100mm long Each 60.90
82 Aluminium door stopper with rubber bush with Each 49.55
required screws

83 Rubber bush - 40 mm dia and 60 mm long with Each 23.10

required screws

84 Mortice Lock-(Godrej or equivalent) with required

screws with 3 Keys

a With night latch Each 540.00

b Without night latch Each 400.00
c Wire nails Kg 64.00
85 Teakwood beading
a 15mm x 12mm RM 15.45
b 35mm x 12mm RM 39.00
86 Teakwood Beading (ordinary)
a 30mm x 12mm RM 32.50
b 25mm x 12mm RM 26.05
87 Teakwood beading - Ornamental / design
a 40mm x 12mm RM 91.50

b 40mm x 15mm RM 104.80

c 25mm x 12mm RM 71.70

d 15mm x 12mm RM 49.15

88 Medium Desity Fibre (MDF) Board - Exterior Grade, sq.m. 2180.00
Both sides pre-lamiated including external lipping
with kiln dried soft wood 35mm thick

89 Medium Density Fibre (MDF) Board - exterior Grade sq.m. 1050.00

- Both sides pre-laminated, 12mm thick

90 MDF Board exterior Grade - Plain including external

lipping with kiln dried soft wood

i 35mm thick sq.m. 1777.00

ii 30mm thick sq.m. 1641.00

91 Medium density fibre (MDF) Board 12 mm thick
Exterior grade - with melamine finish.

a One side melamine finish sq.m. 1111.00

b Both sides melamine finish sq.m. 1251.00
92 Medium density fibre (MDF) board - Exterior grade
- Plain - With teak wook external lipping alround

a 35mm thick sq.m. 1914.00

b 30mm thick sq.m. 1698.00
93 Solid core Flush shutters with Teak ply on both side sq.m. 2255.00
with teak wook lipping alround 35 mm thick

94 Solid core Flush shutters with Teak ply on one side sq.m. 1982.00
and commercial ply on other side with teak wook
lipping alround 35 mm thick
95 Solid core Flush shutters with commercial ply on sq.m. 1698.00
both side with teak wook lipping alround 35 mm
thick

96 Solid PVC door shutters using 19 Gauge 19mm MS

square tubes for styles and outer frames. 15mm
MS square tubes for top, lock and bottom rails.
The steel tubes shall be covered with 5mm thick
solid PVC sheets. Shutter using 5mm thick solid
PVC sheets for panelling shall rigidly fixed in
position including necessary furniture and fittings.
The over all size of styles shall be 50mm x 30mm.
The over all size of top rail, Lock rail and bottom
rail shall be 75mm x 30mm. The over all size of
frames shall be 50mm x 45mm, with suitable
rabate for housing the shutter.

a Solid panel PVC door with frame sq.m. 3325.00

b Solid panel PVC door without frame sq.m. 2800.00
123 supplying & fixing PVC sliding door with Roller sq.m. 3562.00
97a FRP door Sutter with FRP door frames made out of sq.m. 3996.00
FRP Sheets of 3mm thick of over all size 65mm x
50mm with rebate suitably reinforced using MS
Angle / Flats, cost of holdfasts and solid core FRP
shutter Panel of 5mm thick and hollow core frames
of 3m wall thickness for styles and rails etc., of
sizes specified by Engineers.

b Excluding door frames sq.m. 3069.00

98a PVC panelled door shutters hollow type - 200 mm x sq.m. 2135.00
20 mm panels with 1 mm wall thickness for panels
and styles and rails of suitable size with 2 mm wall
thickness suitably reinforced using MS Angle / Flat
including cost of necessary Aluminium hinges and
other furniture fittings.

b Excluding door frames sq.m. 1803.00

99 RCC door frame of 100mm x 65mm cross sectional RM 279.70
size with necessary rebate for housing the shutters,
manufactured with cement concrete of grade not
less than M20 using 10 mm and below graded
stone jelly and using steel reinforcement as per
C.E. (B) circular instructions.
100 Stainless Steel (Salem Stainless Steel) Door Frame RM 918.00
(Box Section using Stainless Steel Plate of 1 mm
thick) of size 100 mm x 60 mm with a rebate of
30 / 35 mm x 15 mm on one side of the frame
including supplying and fixing dovetail splayed end
stainless steel Hold fast etc.,

101 Stainless Steel (Salem Stainless Steel) Door Frame RM 1241.00

(Box Section using Stainless Steel Plate of 1.6mm
thick) of size 100mm x 60mm with a rebate of 30 /
35mm x 15mm on one side of the frame including
supplying and fixing dovetail splayed end stainless
steel hold fast etc.,

102 Supplying and erecting pull and push type rolling

shutter with ISI make of approved size and section
using 18 GI sheet. The shutter shall be painted
with one coat of red oxide primer and the rate is
inclusive of hood covers, transportation charges
etc.,

A ROLLING SHUTTERS (WITH ISI MONOGRAM)

a Manually operated (up to 8 m2 area) sq.m. 2171.00
b Gear operated type (from 8 m2 to 12 m2 area) sq.m. 2419.00
c Electrically operated type (exceeding 12m2 area) sq.m. 2626.00
B ROLLING GRILLS (WITH ISI MONOGRAM)
a Manually operated (up to 8 m2 area) sq.m. 2213.00
b Gear operated (from 8 m2 to 12 m2 area) sq.m. 2492.00
c Electrically operated (exceeding 12m2 area) sq.m. 2770.00
103 Barbed Wire - 10 Gauge - Two ply and four 1 Kg or 62.10
pronged (Galvanised) 6 RM

104 Chain link - 2" x 2" using 10 Gauge Galvanised Iron sq.m. 160.25
Wire (of all sizes)

105 Pin Headed / Fluted / Figured Glass 3mm thick sq.m. 226.60
106 Plain Glass - 4mm thick sq.m. 306.90
107 Plain Sheet Glass - 5.5mm thick sq.m. 362.50
108 Metal screws (for Aluminium Doors, windows etc.)

i 75mm x 8mm Each 2.21

ii 38mm x 6mm Each 1.54
iii 19mm x 8mm Each 1.08
iv 19mm x 6mm Each 0.81
109 Cement paint (First quality) Kg 49.85
110 Oil Bound Distemper Kg 73.80
111 Acrylic Distermper Kg 85.20
112 Primer for Plastic Emulsion paint Litre 147.50
113 Plastic Emulsion paint (First quality) Litre 295.60
114 Wood Primer Litre 147.50
115 Synthetic Enamel paint for Wood work Litre 238.90
116 Red Oxide primer for Iron work Litre 136.90
117 Synthetic Enamel paint for Iron work Litre 227.60
148 melamine polish Srm 648.00
118 G.I. Pipes "B" Class
i 65 mm dia RM 244.40
ii 50 mm Dia RM 209.00
iii 40 mm Dia RM 163.00
iv 32 mm Dia RM 151.40
v 25 mm Dia RM 128.00
vi 20 mm Dia RM 98.60
vii 15 mm Dia RM 69.80
119 G.I.Specials
A Union
i 50 mm Dia Each 266.30
ii 40 mm Dia Each 197.50
iii 32 mm Dia Each 127.50
iv 25 mm Dia Each 98.60
v 20 mm Dia Each 69.80
vi 15 mm Dia Each 58.10
B G.I. Elbow
i 50 mm Dia Each 128.00
ii 40 mm Dia Each 98.60
iii 32 mm Dia Each 87.00
iv 25 mm Dia Each 58.10
v 20 mm Dia Each 25.40
vi 15 mm Dia Each 15.90
C G.I. Bend
i 50 mm Dia Each 116.30
ii 40 mm Dia Each 87.00
iii 32 mm Dia Each 69.80
iv 25 mm Dia Each 52.00
v 20 mm Dia Each 23.20
vi 15 mm Dia Each 13.60
D G.I. TEE
i 50 mm Dia Each 139.80
ii 40 mm Dia Each 110.20
iii 32 mm Dia Each 98.60
iv 25 mm Dia Each 81.40
v 20 mm Dia (30.00) Each 34.70
vi 15 mm Dia Each 28.60
E G.I. COUPLING
i 50 mm Dia Each 69.80
ii 40 mm Dia Each 58.10
iii 32 mm Dia Each 46.50
iv 25 mm Dia Each 28.60
v 20 mm Dia Each 15.90
vi 15 mm Dia Each 13.60
F G.I. REDUCER
i 50 mm x 40 mm Dia Each 93.20
ii 40 mm x 32 mm Dia Each 69.80
iii 32 mm x 25 mm Dia Each 52.00
iv 25 mm x 20 mm Dia Each 28.60
v 20 mm x 15 mm Dia Each 20.30
vi 40 mm x 25 mm Dia Each 52.00
vii 32 mm x 20 mm Dia Each 40.40
G G.I. REDUCER ELBOW
i 50 mm x 40 mm Dia Each 110.20
ii 40 mm x 32 mm Dia Each 93.20
iii 32 mm x 25 mm Dia Each 69.80
iv 25 mm x 20 mm Dia Each 52.00
v 20 mm x 15 mm Dia Each 40.40
vi 40 mm x 25 mm Dia Each 72.70
vii 32 mm x 20 mm Dia Each 57.60
H G.I. REDUCER TEE
 i 50 mm x 40 mm Dia Each 139.80
ii 40 mm x 32 mm Dia Each 116.30
iii 32 mm x 25 mm Dia Each 98.60
iv 25 mm x 20 mm Dia Each 75.30
v 20 mm x 15 mm Dia Each 69.80
vi 40 mm x 25 mm Dia Each 104.70
vii 32 mm x 20 mm Dia Each 81.40
I G.I. HEX NIPPLE
i 50 mm Dia Each 87.00
ii 40 mm Dia Each 69.80
iii 32 mm Dia Each 58.10
iv 25 mm Dia Each 43.70
v 20 mm Dia Each 34.70
vi 15 mm Dia Each 23.20
120 Gun Metal Gate Valve (Heavy Duty)
i 65 mm dia Each 1523.00
ii 50 mm Dia Each 1241.00
iii 40 mm Dia Each 977.00
iv 32 mm Dia Each 760.00
v 25 mm Dia Each 592.00
vi 20 mm Dia Each 350.00
Note: Gate Valves should be used only in devlivery
line to OHT scour pipe in OHT (for cleaning of OHT)
where pressure pumping is involved. In all other
cases only wheel valve should be used.

121 Gun Metal Wheel Valve (Heavy Duty)

i 40 mm Dia Each 652.00
ii 32 mm Dia Each 513.00
iii 25 mm Dia Each 351.00
iv 20 mm Dia Each 241.00
v 15 mm Dia Each 169.00
122 Brass chromium plated screw down Tap 15 / 12mm Each 206.00
Dia (Heavy Type)

123 Chromium plated stop cock 15mm Dia Each 151.30

124 Brass chromium plateed pillar Tap (Heavy type)- Each 269.00
15/12mm Dia
125 Brass chromium plated shower Rose - 100mm Dia Each 194.60
126 Wooden plug, clamp and screws Set 12.20
127 Shellac 100 gram 18.45
128 Thread Ball Each 3.60
129 Oriya Type Indian Water closet 580mm x 440mm
with "P" or "S" Trap

i White Set 1201.00

ii Colour Set 1534.00
130 European Water closet with "P" or "S" Trap with
Double Flapped seat and seat cover with Brass
Hinges and 10 litre capacity PVC low level flushing
tank with all internal fittings

i White Set 3090.00

ii Colour Set 3484.00
131 European water closet with "P" or "S" Trap with
Double falpped seat and seat cover with Brass
Hinges and 12.5 litre capacity porcelin low level
flushing tank with all internal fittings

i White Set 4353.00

ii Colour Set 5241.00
131 Supplying and fixing in position Floor Mounted
EWC European water closet with "P" or "S"
Trap with Double falpped seat and seat cover
with Brass Hinges and 12.5 litre capacity
porcelin low level flushing tank with all
internal fittings
i White/Colour(Floor Fitting) Set
132 Wash Hand Basin of size 550mm x 400mm with all
accessories such as cast iron brackets, 32mm dia
C.P. waste coupling, rubber plug and chain, 32mm
dia 'B' Class G.I. waste pipe, 15mm dia G.M. wheel
valve, 15mm dia nylon connection, 15mm dia brass
nipples, 15mm C.P. pillar tap etc.

i White without pedastal Set 1672.00

ii White with pedastal Set 2012.00
iii Colour without pedastal Set 2239.00
iv Colour with pedastal Set 2477.00
133 White Porcelin Sink of size 600mm x 450mm x Set 2147.00
200mm with 32mm dia 'B' Class G.I. waste water
pipe and 32mm dia C.P. waste coupling.
134 Cuddapah Slab Sink of size 600mm x 450mm x Set 769.00
200mm with 32mm dia 'B' Class G.I. waste water
pipe & 32mm dia C.P. waste coupling.

135 Cuddapah Slab Sink of size 600mm x 600mm x Set 1020.00

200mm with 32mm dia 'B' Class G.I. waste water
pipe & 32mm dia C.P. waste coupling.

136 Lipped Mouth Porcelin Flat Back Urinal with all

accessories such as 32mm dia Bell mouth PVC
connection, 15mm dia G.M. wheel value, 15mm dia
'B' Class G.I. waste water pipe, 15mm dia nylon
connection, 15 mm dia brass nipple etc.,

i White Set 940.00

ii Colour Set 1075.00
137 Porcelin soap dish of size 150mm x 150mm x
50mm

i White Each 196.20

ii Colour Each 268.80
138 Brass chromium plated soap tray of size 150mm x Each 165.10
100mm

139 Brass chromium plated towel rail 60cm long and Set 269.00
20mm dia with brackets

140 Anodised Aluminium Towel Rail 60cm long and Set 145.15
20mm dia with Brackets.

198 SS Towel Rack 600mm long with lower hanger Each 1545.00

201 Special type mirror of swize 1000x780mm Each 2575.00

141 PVC / Fibre Glass framed 5.5mm thick mirror, shelf

type with Hard Board Backing

i 600mm x 450mm Each 494.70

ii 500mm x 400mm Each 398.30
142 Stone ware gully trap of size 150mm x 100m with Each 170.35
cast Iron Double Gratings

143 Cast Iron Nahini / Floor Trap with stainless

Steel Grating

i 100mm x 75mm Each 276.90

ii 75mm x 50mm Each 216.90
144 PVC Nahini / Floor Trap with PVC Grating
 i 100mm x 75mm Each 178.00
ii 75mm x 50mm Each 156.00
145 First Quality cast Iron pipe
i 150mm Dia RM 994.00
ii 100mm Dia RM 599.00
iii 75mm Dia RM 478.00
iv 50mm Dia RM 339.00
146 First Quality cast Iron Specials
A Plain Bend
i 150mm Dia Each 538.00
ii 100mm Dia Each 262.00
iii 75mm Dia Each 202.00
iv 50mm Dia Each 154.00
B Bend with Door
i 150mm Dia Each 623.00
ii 100mm Dia Each 315.00
iii 75mm Dia Each 262.00
iv 50mm Dia Each 208.00
C Plain TEE
i 150mm Dia Each 1078.00
ii 100mm Dia Each 478.00
iii 75mm Dia Each 327.00
iv 50mm Dia Each 225.00
D TEE with Door
i 150mm Dia Each 1139.00
ii 100mm Dia Each 551.00
iii 75mm Dia Each 382.00
iv 50mm Dia Each 273.00
E "Y" Junction with Door (single)
i 150mm Dia Each 1197.00
ii 100mm Dia Each 599.00
iii 75mm Dia Each 418.00
iv 50mm Dia Each 298.00
F "Y" Junction with Door (Double)
i 150mm Dia Each 1320.00
 ii 100mm Dia Each 670.00
iii 75mm Dia Each 502.00
G COWL
i 150mm Dia Each 327.00
ii 100mm Dia Each 196.00
iii 75mm Dia Each 131.00
iv 50mm Dia Each 101.00
147 Stone Ware Pipe
i 150mm Dia Each 102.00
(0.6.RM)
ii 100mm Dia Each 63.40
(0.6.RM)
148 Stone ware specials
A Stone ware TEE
i 150mm Dia Each 166.15
ii 100mm Dia Each 128.00
B Stone Ware Bend
i 150mm Dia Each 140.65
ii 100mm Dia Each 101.60
C Stone ware "Y" Junction
i 150mm Dia Each 171.30
ii 100mm Dia Each 127.55
149 Spun Yarn Kg 13.10
150 Hemp Yarn Kg 11.80
151 Gunny Tape / Kithan sq.m. 11.80
152 Tar Kg 41.10
153 Bitumen Felt 15 mm thick pad sq.m. 234.30
154 Supplying, fabricating, erecting and fixing gyp
board false ceiling upto a ceiling height of 4.5m
from floor level.

a Using plain sheets (10mm thick) sq.m. 972.00

b Using perforated sheets (10mm thick) sq.m. 994.00
155 Supplying and laying Glass wool for insulation
including necessary packing materials.

a Using 50mm thick Glass wool sq.m. 392.60

b Using 25mm thick Glass wool sq.m. 209.00
WATER SUPPLY AND SANITARY ARRANGEMENTS
 PVC ITEMS FINOLEX (OR) EQUIVALANT
156 4 Kg/Rm
(WITH ISI MONOGRAM)

1 PVC Pipes
a 50 mm Dia RM 64.75
b 63 mm Dia RM 93.75
c 75 mm Dia RM 130.40
d 90 mm Dia RM 152.00
f 100 mm Dia RM 177.50
g 110 mm Dia RM 203.10
h 160 mm Dia RM 419.70

PVC ITEMS FINOLEX (OR) EQUIVALANT

156 6 Kg/Rm
(WITH ISI MONOGRAM)

1 PVC Pipes
a 50 mm Dia RM 101.40
b 63 mm Dia RM 137.30
c 75 mm Dia RM 195.50
d 90 mm Dia RM 232.30
f 100 mm Dia RM 268.50
g 110 mm Dia RM 304.90
h 160 mm Dia RM 595.00

PVC ITEMS FINOLEX (OR) EQUIVALANT

156 10 Kg/ Rm
(WITH ISI MONOGRAM)

1 PVC Pipes
a 15 mm Dia RM 17.10
b 20 mm Dia RM 25.30
c 25 mm Dia RM 43.25
d 32 mm Dia RM 64.75
e 40 mm Dia RM 101.40
f 50 mm Dia RM 151.90
Note (1) For Rainwater down fall pipe works, only PVC
Pipe of working Pressure of 4 kg. per sq.cm. shall
be adopted.

(2) For Sanitary arrangement items of works, only

PVC Pipe of working Pressure of 6 kg. per sq.cm.
shall be adopted.
 (3) For Water Supply arrangement items of works,
only PVC Pipe of working Pressure of 10 kg. per
sq.cm. shall be adopted.

157 PVC Specials for water supply arrangements

10 Kg

A Coupler 10 kg
a 15 mm Dia Each 4.05
b 20 mm Dia Each 4.70
c 25 mm Dia Each 5.55
d 32 mm Dia Each 7.00
e 40 mm Dia Each 10.50
f 50 mm Dia Each 14.25
B Elbow
a 15 mm Dia Each 6.15
b 20 mm Dia Each 7.00
c 25 mm Dia Each 9.95
d 32 mm Dia Each 14.25
e 40 mm Dia Each 20.15
f 50 mm Dia Each 28.75
C BEND
a 15 mm Dia Each 7.00
b 20 mm Dia Each 8.50
c 25 mm Dia Each 11.30
d 32 mm Dia Each 17.10
e 40 mm Dia Each 22.90
f 50 mm Dia Each 36.00
D Tee
a 15 mm Dia Each 8.50
b 20 mm Dia Each 9.95
c 25 mm Dia Each 14.25
d 32 mm Dia Each 17.20
e 40 mm Dia Each 28.75
f 50 mm Dia Each 43.25
E End Cap
a 15 mm Dia Each 4.05
b 20 mm Dia Each 5.55
c 25 mm Dia Each 7.00
d 32 mm Dia Each 8.50
e 40 mm Dia Each 13.30
f 50 mm Dia Each 18.55
F Reducer
a 20 mm x 15 mm Each 5.55
b 25 mm x 20 mm Each 6.15
c 32 mm x 25 mm Each 9.95
d 40 mm x 32 mm Each 13.30
e 50 mm x 40 mm Each 22.90
G Reducer Tee
a 20 mm x 15 mm Each 8.50
b 25 mm x 20 mm Each 9.95
c 32 mm x 25 mm Each 14.25
d 40 mm x 32 mm Each 17.20
e 50 mm x 40 mm Each 28.75
H Reducer Elbow
a 20 mm x 15 mm Each 7.00
b 25 mm x 20 mm Each 8.50
c 32 mm x 25 mm Each 11.30
d 40 mm x 32 mm Each 14.25
e 50 mm x 40 mm Each 21.50
i Jet Nipple
a 25 mm Dia Each 18.55
b 32 mm Dia Each 24.25
j PVC Door Bend
a 15 mm Dia Each 7.00
b 20 mm Dia Each 8.50
c 25 mm Dia Each 11.30
d 32 mm Dia Each 17.10
e 40 mm Dia Each 22.95
f 50 mm Dia Each 33.35
k PVC Door Tee
a 15 mm Dia Each 8.50
b 20 mm Dia Each 9.95
 c 25 mm Dia Each 14.25
d 32 mm Dia Each 17.20
e 40 mm Dia Each 28.55
f 50 mm Dia Each 32.40
158 PVC SPECIALS FOR SANITARY ARRANGEMENTS
FINOLEX (OR) EQUIVALENT (WITH ISI "O" Ring
MONOGRAM) Jointing

A Elbow
a 75 mm Each 75.90
b 90 mm Each 97.30
c 110 mm Each 118.00
d 160 mm Each 131.90
B Door Elbow
a 75 mm Each 97.30
b 90 mm Each 125.20
c 110 mm Each 153.00
d 160 mm Each 181.00
C Tee
a 75 mm Each 104.10
b 90 mm Each 131.90
c 110 mm Each 173.70
d 160 mm Each 195.20
D Tee with Door (Single)
a 75 mm Each 131.90
b 90 mm Each 159.90
c 110 mm Each 201.70
d 160 mm Each 243.60
E Tee with Door (Double)
a 75 mm Each 166.90
b 90 mm Each 229.60
c 110 mm Each 278.90
d 160 mm Each 319.70
F Bend
a 75 mm Each 83.40
b 90 mm Each 104.10
c 110 mm Each 125.20
d 160 mm Each 139.10
G "Y"
a 75 mm Each 111.40
b 90 mm Each 139.10
c 110 mm Each 181.10
d 160 mm Each 201.70
H "Y" with Door (single)
a 75 mm Each 131.90
b 90 mm Each 167.20
c 110 mm Each 223.10
d 160 mm Each 256.30
I "Y" with Door (Double)
a 75 mm Each 181.00
b 90 mm Each 243.30
c 110 mm Each 292.70
d 160 mm Each 353.90
J Double Tee with Door (Single)
a 75 mm Each 229.30
b 90 mm Each 263.30
c 110 mm Each 311.60
d 160 mm Each 348.00
K Double "Y" with Door (single)
a 75 mm Each 250.40
b 90 mm Each 278.60
c 110 mm Each 318.60
d 160 mm Each 389.20
L Reducer
a 75 mm x 63 mm Each 76.00
b 110 mm x 63 mm Each 97.30
c 110 mm x 75 mm Each 111.40
d 110 mm x 90 mm Each 125.10
f 160 mm x 110 mm Each 146.00
M Shoe
a 110 mm dia Each
b 160 mm dia Each
N Vent Cowl
a 50 mm dia Each
b 75 mm dia Each
c 110 mm dia Each
159 PVC AND HDPE PIPES FOR BORE WELLS
A Special Blue Pipes for Bore Well
a 110 mm dia RM
b 125 mm dia RM
c 140 mm dia RM
d 160 mm dia RM
B Special Blue Slotted Pipes for Bore Wells
a 110 mm dia RM
b 125 mm dia RM
c 140 mm dia RM
d 160 mm dia RM
C End Cap for Bore Well
a 110 mm dia Each
b 125 mm dia Each
c 140 mm dia Each
d 160 mm dia Each
D HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE
WELL Class-5 1 MPa or 10 kg. / cm2 pressure)
a 20 mm dia RM
b 25 mm dia RM
c 32 mm dia RM
d 40 mm dia RM
e 50 mm dia RM
OTHER ITEMS :
160 PVC screw down tap heavy type 20 mm dia Each 93.40
161 PVC screw down tap heavy type 15 mm dia Each 72.40
162 PVC Adhesive (solution) 100 gm 36.00
163 PVC low level flushing tank with all internal fittings
- (wall mounting type)

a White - 10 litre capacity Set 995.00

b White - 7.5 litre capacity Set 760.00
c Colour - 10 litre capacity Set 1127.00
 d Colour - 7.5 litre capacity Set 895.00
164 PVC Water Tank Litre 10.05

0 NEW ITEMS
a Vitrified Tiles of size 600x600x8mm sq.m.
b Pre-polished concrete anti-skid step tiles of 20mm sq.m. 653.00
thick
c Colour designed glazed tiles 300x200x6mm Each 30.80

d Squatting Urinal set 454.50

e CI Brackets for fixing the sink Set 107.90

f Swan Neck Tap Each 252.50

f S.S Swan Neck Tap Each 1030.00

f S.S Heavy duty long body Tap15mm Each 1545.00

f S.S Elbow action Tap 15 mm Each 1545.00

h Brass Screws (30x6mm) Each 2.41

h Brass Screws (75 x 10mm) Each 4.88

i Special clamp, teak wood plugs and screws Set 21.60

j PVC clamp, teak wood plugs and screws Set 8.50

k Teak wood plug Each 1.08

l Teak wood plug (50 x 50 x 100mm) Each 5.40

m Manhole Cover 60 x 60cm (heavy duty) with frame Each 1864.00

n Welding charges

o 50mm Each 2.11

p 40mm Each 1.64

q Add for painting / tarring for Hex Nipple Each 2.82

r Labour charges for fixing cuddapah slab to cup- Sqm. 45.95

board
s Hire charges for polishing machinery Day 228.60
t Electrical charges Unit 11.90
u Stain Free Nano Polish Vitrified Tiles 600x600x8mm Sqm. 658.00
 v Double Charged Vitrified Tiles 600x600x8mm Sqm. 982.00

w Double Charged Vitrified Tiles 800x800x10mm Sqm. 1253.00

x Joint free Rectified Glazed Ceramic Flooring Tiles Each 57.80
305x305x8mm.
y Terracotta Jally of size 20x20x.75mm Each 38.95

z S&F shade net (Green net) for under construction Sqm. 67.25
high rise blds

178 Supplying and fixing in position White/Colour Each 5073.00

Glazed Model Floor Mounted European Water Closet
of best quality and approved make with 100mm "P"
or "S" trap connecting with CI pipe of 100mm dia /
PVC Pipe of 110mm dia, double flapped rigid PVC
black seat and seat cover with CP brass hinges
including cost of white cement,cement for
packing,spun yarn, teak wood plugs, brass screws,
etc., including supplying and fixing 10 litres
capacity PVC / 12.5 Litres capacity porcelin low
kevel flushing tank with a pair of CI brackets, etc.,
complete with all fittings, such as, 15mm brass ball
valve with polythene float with brass handle, union
coupling connected by means of 40mm white PVC
flush hand using indian adopter joint including all
internal fittings, such as, 15mm brass connections,
15mm GM wheel valve, 15mm brass nipple (2
Nos), 15mm nylon connection, TW plugs, screws
and also giving necessary connection to the PVC
pipe and painting the CI brackets with 2 coats of
approved paint over one coat of red oxide primer,
dismantling the masonary and re-doing the
dismantled masonry to original condition, etc.,
179 Supplying and fixing in position White/Colour Each
Special Delux Model Glazed Cascade Type
Parryware / Hindware /Equivalent Wall Mounted
European Water Closet of best quality and
approved make with 100mm "P" or "S" trap
connecting with CI pipe of 100mm dia / PVC Pipe of
110mm dia, double flapped rigid PVC black seat
and seat cover with CP brass hinges including cost
of white cement,cement for packing,spun yarn,
teak wood plugs, brass screws, etc., including
supplying and fixing 10 litres capacity PVC / 12.5
Litres capacity porcelin low kevel flushing tank with
a pair of CI brackets, etc., complete with all fittings,
such as, 15mm brass ball valve with polythene float
with brass handle, union coupling connected by
means of 40mm white PVC flush hand using indian
adopter joint including all internal fittings, such as,
15mm brass connections, 15mm GM wheel valve,
180 Vinyl Flooring 2mm thick Sqm. 552.00
181 Manufacturing, Supplying and Fixing of Stainless Steel sqm. 5536.00
Hand rails for staircase using 50mm dia 304L Grade
Stainless Steel pipe of 1.60mm thick at required
locations to a height of
900 mm from finished floor level welded to 38mm
dia Stainless Steel pipe post of 1.00mm thick as
vertical at 900mm centre with 2 Nos. of 25mm dia
intermediate horizontal stainless steel pipe of 1.60mm
thick in between. The vertical pipe has to be welded to
the 100 X 100 X 6mm MS base plate encased in the base
concrete. The rate is inclusive of the charges for cutting,
bending, welding, grinding, polishing, conveyance,
electrical charges, etc. complete

182 Manufacturing, Supplying and Fixing of Stainless Steel RM 1843.00

Hand rails for staircase near wet riser using 50mm dia
304L Grade Stainless Steel pipe of 1.60mm thick will be
provided with tubular supports made of 304L Grade
Stainless Steel pipe of
25mm dia of 1.60mm thick welded to the railing.
The supports will be grouted into the wall and
provided with 93.00mm thick Stainless Steel circular
base plate of 304 Grade. The rate shall included for
grouting into concrete with necessary supporting
arrangements the hand rail in floor polishing buffing,
bonding, cutting, grinding, conveyance, welding charges,
electrical charges, etc. complete

183 PVC mould CI Steps for Sump Each 230.20

184 Vertical Blinds
a Ordinary sqm. 922.00

b Premium sqm. 1383.00

185 Stainless Steel Heath Faucet Each 1013.00

186 High Density Fibre (HDF) Board sqm. 2210.00

187 Providing and fixing of Aluminium Composite Panel (ACP) sqm. 4836.00
4 sided having 50 x 25 x 1.50mm frame work vertical
and horizontals out of specially designed extruded
sections withstand wind pressure of 180 Kg/sq.m and
fabricated fixed at all level elevation and heights.
The extruded section cutting and fixing required space
extruded section shall be of
6063 and alloy of BSH 9 confirming T is – 63400 rate
shall included to fix the main frame with necessary
clamps, fasteners, bolt nuts etc. The main frame of
extruded section shall be of 22843 & 22739 (H9) grade
conforming to BS 4174 (or) IS 8147. Rate shall included
4mm thick ACP sheet (0.25
+ 3.5 + 0.25) alstrong or equivalent fixing with spacer
tape and the ACP sheet bounded with special type
structural sealant of dow corning 789 or equivalent in
dust free conditions the gaps between ACP sheet to be
filed with whether sealant and backer rod or 12mm foam
sheet to ensure water and air tightness in all complete
complying with standard specification as directed by the
departmental officer

188 Designingthe Semi Unitised Structural sqm., 4841.00

GlazingSystem withopen groove Joint as per design
intent, preparation of shop drawings for approval,
supply, fabricate, erect as per approved shop
drawings at all floor levels and all floor heights
including conducting field test as per the test
criteria set out in the particular specification
(Metholodgy should be got approved by the Dept.,
Officials.) Design the framing system (i.e. male &
Female frame) to support vision panels, spandrel
panels either with glass or aluminium composote
panel, openable, window panels on a continuius
framing supported between floors. Also design the
split framing unutilized glazing system in case of
strip or punched windows with vision panel
proposed with either insulated / Monolithic glass,
groove width in the saystem both in horizontal and
vertical shall not be more than 20mm. Glazing of
panel shall be done only at factory at the controlled
atmosphere

189 Bitumen Ped

a 12mm thick sqm. 479.00

b 20mm thick sqm. 719.00

190 Pre-Painted Galvanized Iron Window (Airtight Model) sqm. 5508.00
with
Grill and glass
Specification:
Providing and fixing for Pre-Painted GI Window fabricated
from roll formed sections made of Galvanized Iron
Color Coated / Powder Coated (Base steel as per IS 513
„D‟ quality, galvanized as per IS 277 with zinc of 120
GSM / sqm.) with total coated thickness of 0.6mm.
Coated Sections should be with Primer Coat of Epoxy
Primer of 5-7 microns thick, finished paint with a
polyester paint of 12-16 microns thich and back coated
with alkyd backer of 5-7 microns or powder coated with
pure polyester powder upto 50-60 microns thick.
Sections for shutter shuld be of 46 x 46mm and external
frame should be of 46 x 52mm. Section for glass
beading should be of 18 x 25mm and centre mullion
should be of 46 x70mm. The frame and shutter sections
should be cut to length and miter joined with corner
bracket made of glass filled Nylon.
Mullion Section should be joined with Frame / Mullion
using Nylon Mullion Cap Ethyl Propylene Diamine
Monomer (EPDM) Gasket should be used all around glass
in shutter between frame and galzed shutter and both
sides of fixed glass. Handle made of high grade
Aluminum Powder coated and with nylon receiver–1 each
shutter. Friction hinge-1 set for each shutter. Glass
shutter and fixing glass portions should be provided with
a Acrylic Sheet of minimum 6mm thickness. Windows
should be provided with grill made of 10mm square.
MS Bars welded at 4” intervals centre to centre,
5mm x 12mm MS flat. Total grill unit should be powder
190 Pre-Painted Galvanized
coated and fixed Ironframe
to window Window (semi
with air The
Rivets. typeabove sqm. 5151.00
Model) with be fixed to brick / concrete masonry by
frame should
Grill
usingwith glass
nylon self-expanding caps and driving MS
Specification:
Providing and fixing for Pre-Painted GI Window fabricated
from roll formed sections made of Galvanized Iron
Color Coated / Powder Coated (Base steel as per IS 513
„D‟ quality, galvanized as per IS 277 with zinc of 120
GSM / sqm.) with total coated thickness of 0.6mm.
Coated Sections should be with Primer Coat of Epoxy
Primer of 5-7 microns thick, finished paint with a
polyester paint of 12-16 microns thich and back coated
with alkyd backer of 5-7 microns or powder coated with
pure polyester powder upto 50-60 microns thick.
Sections for shutter shuld be of 46 x 46mm and external
frame should be of 46 x 52mm. Section for glass
beading should be of 18 x 25mm and centre mullion
should be of 46 x70mm. The frame and shutter sections
should be cut to length and miter joined with corner
bracket made of glass filled Nylon.
Mullion Section should be joined with Frame / Mullion
using Nylon Mullion Cap Ethyl Propylene Diamine
Monomer (EPDM) Gasket should be used all around glass
in shutter between frame and galzed shutter and both
sides of fixed glass. Handle made of high grade
Aluminum Powder coated and with nylon receiver–1 each
shutter. Friction hinge-1 set for each shutter. Glass
shutter and fixing glass portions should be provided with
a Acrylic Sheet of minimum 6mm thickness. Windows
should be provided with grill made of 10mm square.
MS Bars welded at 4” intervals centre to centre,
5mm x 12mm MS flat. Total grill unit should be powder
coated and fixed to window frame with Rivets. The above
frame should be fixed to brick / concrete masonry by
using nylon self-expanding caps and driving MS
191 UPVC Window sqm. 7482
Specification:
Supplying and fixing UPVC (Un-Plasticized
Polyvinyl Chloride) Windows of casement type
(open) from the profile the size of outer frame
60mm x 58mm and shutter profile are
reinforcement with GI/1mm 125GSM and 100%
corrosion free, the profiles are multi chambered
sections with wall thick of 2mm. The EPDM rubber
(black colour) covered with over all the edges of
frame and shutter the shutter will be provided with
Espag multi power point locks and also it operates
as handle. The corners and joints should be welded
and cleaned. Radiations free pin headed plain or
brown colour glass 4mm thick should be provided
to the shutter and it should not allow leakage of
water even at most ranging storms and should
have key lockable action, security protective
hinges, strong locking systems and as per size for
arresting noise and energy loss. The connecting
mechanism between sash and outer frame that
enables opening of the window. The window should
be fixed to the wall with 100% packing with screws
and silicon packing all round the frames. The
window should be got approved from the Executive
Engineer before use on work

192 UPVC Ventilator sqm. 8106

Specification:
Supplying and fixing UPVC (Un-Plasticized
Polyvinyl Chloride) Louvered Ventilators of from the
profile the size of outer frame 60mm x 58mm and
shutter profile size of 60 x 78mm both profiles are
reinforced with GI/1mm 125GSM and 100%
corrosion free, the profile are multi chambered
sections with wall thick of 2mm. The EPDM rubber
(black colour) covered with all over the edges of
frame and shutter. The corners and joints should be
welded and cleaned. Radiations pin headed glass
4mm thick should be provided in the louvers. The
window should be fixed to the wall with 100%
packing with screws and silicon packing all round
the frames. The ventilator should be got
approved from the Executive Engineer before use
on work
193(A) FOAMED PVC DOOR FRAME Specification: Providing RM 530.00
factory made pre-laminated FPVC (Formed
polyvinyl Chloride) Door Frame of the size
105x40mm with a wall thickness of 10mm made
out of extruded rigid FPVC profile mitre joined with
6 Nos. of 5mm long screw. The door frame shall be
fixed to the wall by using 80mm long screws
through the frame with the help of PVC fasteners of
3 Nos. to be provided for each vertical member, GI
stiffeners of ('U' CHANNEL OF SIZE 29X9, 1mm,
150mm long)-3 Nos. at hinge point, frame
reinforcement of ('U' GI channel of size
46x22x0.6mm), bottom tie rod of ('U' GI channel
size of 15x15x1mm), etc., complete complying with
the standard specification. The door frame should
193(B) ABS DOOR Specification:
Providing and fixing of ABS (Acrolynitrile Butadiene
Styrene)
Door using factory made plain FPVC (Foamed Polyvinyl
Chloride) door frame of the size 105 x 40mm with a wall
thickness of 10mm made out of extruded rigid FPVC
profile mitre joined with 10 Nos. of 50mm long screw.
The door frame shall be fixed to the wall by using 80mm
long screws through the frame with the help of PVC
fasteners to be provided for each vertical member,
stiffeners of („U‟ Channel of size 29 x 9 x 1mm, 150mm
long) 3 Nos. at hinge point, frame reinforcement of („U‟
GI Channel of size 46 x 22 x 0.06mm), bottom tie rod
of („U‟ GI Channel size of 15 x 15 x 1mm), the ABS
Shutter of 35mm thick factory made plain pre-laminated.
ABS (Acrolynitrile Butadiene Styrene) door shutter
moulded in different designs, consisting of all round
Frame made out of water proof solid foam PVC bar of
size
20x32mm, reinforced by 32 x 32mm - 2 Nos. for vertical
made out of LVL (Laminated Veneer Lumber), core
a Plain Pre-laminated Door sqm. 5946.00
material of 32mm thick high density craft paper honey
comb board, sandwiched on both sides with pre-
b Design Pre-laminated Door sqm. 6273.00

194 Rubber Moulded Hydraulic Pressed Paver Block

a 83mm thick sqm. 552.00

b 63mm thick sqm. 459.00

195 TAMIN Paver Block of size – Supply at site

a 60mm thick sft. 51.50

b 80mm thick sft. 61.60

196 Solar Reflective Ceramic Tiles of size

a 305 x 305 x 7mm thick sqm. 506.00

b 305 x 240 x6mm thick sqm. 418.00

197 Aerated Auto Claved Cellur Concrete Block

a 600x200x100 Each 45.80

b 600x200x150 Each 68.65

c 600x200x200 Each 91.60

d 600x200x225 Each 103.50

e self curing AAC joint mortor 40/Kg/bag 612.00

f Ready mix plaster for rending 50/Kg/bag 303.00

198 Plasticizer / Super Plasticizer Kg. 43.20

PVC Specials for water supply arrangements

I PVC Door Bend

a 15mm Dia Each 7.00

b 20mm Dia Each 8.50

c 25mm Dia Each 11.30

d 32mm Dia Each 17.10

e 40mm Dia Each 22.95

f 50mm Dia Each 33.35

K PVC Door Tee

 a 15mm Dia Each 8.50

b 20mm Dia Each 9.95

c 25mm Dia Each 14.25

d 32mm Dia Each 17.20

e 40mm Dia Each 28.55

f 50mm Dia Each 32.40

208 UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC

used for residential and home applications, water
pressure in resodential areas do not normally
exceed the maximum tolerance. (Schedule-40)

a 15mm Dia RM 42.60

b 20mm Dia RM 61.20

c 25mm Dia RM 88.80

d 32mm Dia RM 120.50

e 40mm Dia RM 133.70

f 50mm Dia RM 184.20

g 65mm Dia RM 273.90

h 80mm Dia RM 350.30

i 100mm Dia RM 459.80

j 150mm Dia RM 767.80

209 UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC

used for commercial l and home applications, water
pressure in resodential areas do not normally
exceed the maximum tolerance. (Schedule-80)
 a 15mm Dia RM 53.50

b 20mm Dia RM 75.60

c 25mm Dia RM 107.40

d 32mm Dia RM 148.10

e 40mm Dia RM 182.20

f 50mm Dia RM 248.10

g 65mm Dia RM 353.80

h 80mm Dia RM 509.10

i 100mm Dia RM 754.90

j 150mm Dia RM 1260.00

210 CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher

pressure rating with higher pipe thickness)
Standard Dimension Ratio-11
a 15mm Dia RM 77.50

b 20mm Dia RM 117.60

c 25mm Dia RM 183.40

d 32mm Dia RM 273.90

e 40mm Dia RM 301.00

f 50mm Dia RM 328.00

g 65mm Dia RM 356.20

New item

h 80mm Dia RM 446.20

 i 100mm Dia RM 682.00

j 150 mm Dia RM 997.00

211 CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Lesser

pressure rating with lesser pipe thickness) Standard
Dimension Ratio-13.50
a 15mm Dia RM 67.90

b 20mm Dia RM 107.80

c 25mm Dia RM 156.50

d 32mm Dia RM 237.50

e 40mm Dia RM 262.10

f 50mm Dia RM 285.60

g 65mm Dia RM 309.20

New item

h 80mm Dia RM 330.70

i 100mm Dia RM 498.70

j 150 mm Dia RM 735.00

NEW ITEMS (AS per2023-24)

New Labourers for Heritage Works
Skilled Mason class-1 for Heritage work Day 1409.00
Skilled Mason class-11 for Heritage work Day 1232.00
New labour for Heritage Works
Skilled Sthapati Brick Mason for Heritage DAY 1761.00
work

New labour for Heritage Works

Skilled Sthapati stone mason for Heritage Day 1761.00
work
 New labour for Heritage Works

Special Bricks 8"x4"x2'' for Heritage Works 1000 Nos 13365.00

Terrace Bricks 6''x3''x1'' for Heritage Works 1000Nos 10020.00

Wire cut Bricks for for Heritage Works

Size 9''x4''x3'' 1000Nos 13365.00

Size 9''x4''x2'' 1000Nos 11140.00

Size 9''x6.5''x2'' 1000Nos 16705.00

New Items for Heritage works

Attangudi Tiles for for Heritage Works

Size 8''x8''x3/4'' Each 26.95

Size 10''x10''x3/4'' Each 32.70

Size 12''x12''x3/4'' Each 50.00

58D Plastering Sand (P-Sand) cum 1343.00

New item for Heritage Works

Unslaked Pollachi Lime for heritage works cu.m 10345.00

109
Freshly slaked and screened lime (cao not less cu.m 15500.00
than 85% foe theerval plastreing in heritage
works)
93
seasoned teak wood for scantling and planks cu.m 185200.00
124 for heritage works
Fine polished steel grey granite slab sq.m 1512.00
13 d 1200mmx600mm,16mmto 18mm thick

Fine polished Blue Pearl granite slab sq.m 7571.00

e 1200mmx600mm,16mmto 18mm thick

Flamed steel grey granite slab sq.m 1832.00

14 (1) a 1200mmx600mm,16mmto 18mm thick
 Flamed Ruby Red granite slab sq.m 1946.00
14 (1) b 1200mmx600mm,16mmto 18mm thick

making through holes in plain or Reinforced

cement concrete with Diamond core drilling
200 system by using BOSCH power tools of
following diameter- Depth per cm

a 100mm Each 324.00

b 150mm Each 432.00

c 200mm Each 484.00

201 Dadooing ceramic tiles of size 300mm Each 62.40

x450mmx 8mm

202 Dadooing ceramic tiles of size 300mm Each 92.70

x600mmx 10mm

203 Supplying and Installing Metal False ceiling sq.m 3151.00

using Fire Rretardant Galvanized steel sheet
plain lay in tile size 600mmx600mm,0.50mm
thick, power coated on external surface and
shall have flange on all four sides to test on
the exposed grids.......

204 Providing and fixing of 1.20mm thick lead sq.m 14059.00

lining door for X- Ray Rooms,scanning rooms
with Mild steel door frame 105mmx57mmx
18G and 12G x50mm shutter made of GI with
PEG finish and honey wool insulation........
205 Post Tensioning Work ; Design and execuction MT 199775.00
of post tensioning work, including decoiling
the strands, cutting to the required lenth
supplying laying of HT strants sheathing....

206 supplying Fabricating and fixing in position sq.m 37743.00

factory made stainless steel flush door shutter
35mm thick using SS 304 Grade 1.6mm thick,
stainless steel sheets on both sides......

207 Brass Letters

a 25cm (10") Each 918.00

b 37cm (15") Each 1296.00

c Emblem (15") Each 12975.00

208 Manhole cover SFRC

a 600mm x 600mm Each 2701.00

 b 750mm x 750mm Each 2971.00

c 900mm x 900mm Each 3244.00

273 S&F of SS Wall Cladding sq.m 12875.00

274 S&F of SS False ceiling sq.m 7726.00

275/a Aluminium dye cast letter 9'' Each 1179.00

275/b Aluminium dye cast letter 6'' Each 748.00

276/a English letter brass25 cm 10'' Each 918.00

276/b English letter brass 37 cm 15'' Each 1296.00

209 Incinerator for ladies bath room (For school Each 34570.00
works)

210 Polycarbonate sheet 6mm thick sq.m 648.00

211 Melamine Polish sq.m

New 294 Galvalume colour sheet of size (0.47mm) sq.m 434.00
item
212 Supplying and erecting in position of following
Liters capacity Industrial Model Reverse
Osmosis Water-cum- Purifier to deliver
Potable water with World Health Organisation
(WHO) standards with following accessories…

a 50 Litres ( New item) set 40320.00

b 250 Litres set 108000.00

c 500 Litres set 226200.00

d 1000 Litres set 376700.00

e 2000 Litres set 519000.00

226 UPVC Specials

I Elbow
a 50mm dia Each 87.80

b 40mm dia Each 58.40

c 32mm dia Each 43.80

d 25mm dia Each 29.10

e 20mm dia Each 17.90

f 15mm dia Each 11.90

II Tee
a 50mm dia Each 121.80

b 40mm dia Each 75.60

c 32mm dia Each 57.00

d 25mm dia Each 38.50

e 20mm dia Each 22.20

f 15mm dia Each 15.80

III Union
a 20mm dia Each 41.20

b 15mm dia Each 33.00

c 25mm dia Each 66.20

d 32mm dia Each 89.40

e 40mm dia Each 132.60

f 50mm dia Each 282.20

III Bend
a 20mm dia Each 23.50

b 25mm dia Each 32.80

a 32mm dia Each 41.10

b 40mm dia Each 58.80

a 50mm dia Each 82.30

III Coupler
a 15mm dia Each 17.80

a 20mm dia Each 22.70

b 25mm dia Each 32.70

a 32mm dia Each 41.60

b 40mm dia Each 51.60

a 50mm dia Each 71.00

IV Reducer
a 50mm x 40mm dia Each 60.00

b 40mm x 32mm dia Each 38.50

c 32mm x 25mm dia Each 27.90

d 25mm x20mm dia Each 16.90

e 20mm x 15mm dia Each 12.40

V Reducer Elbow
a 50mm x 40mm dia Each 117.10

b 40mm x 32mm dia Each 80.50

c 32mm x 25mm dia Each 58.40

d 25mm x20mm dia Each 38.30

e 20mm x 15mm dia Each 31.70

VI Reducer Tee
a 50mm x 40mm dia Each 134.00

b 40mm x 32mm dia Each 89.40

c 32mm x 25mm dia Each 64.70

d 25mm x20mm dia Each 38.50

e 20mm x 15mm dia Each 30.70

VII Hex Nipple

a 50mm dia Each 188.10

b 40mm dia Each 124.90

c 32mm dia Each 81.60

d 25mm dia Each 58.40

d 20mm dia Each 30.80

d 15mm dia Each 22.30

227 CPVC Specials

I Elbow
a 50mm dia Each 367.50

b 40mm dia Each 178.50

c 32mm dia Each 107.40

d 25mm dia Each 50.50

e 20mm dia Each 23.90

f 15mm dia Each 20.70

II Tee
a 50mm dia Each 463.00

b 40mm dia Each 245.70

c 32mm dia Each 137.20

d 25mm dia Each 60.90

e 20mm dia Each 39.20

f 15mm dia Each 27.90

II Bend
a 25mm dia Each 47.00

b 20mm dia Each 37.50

c 15mm dia Each 29.40

III Coupling
a 50mm dia Each 252.60

b 40mm dia Each 121.00

c 32mm dia Each 65.90

d 25mm dia Each 32.70

e 20mm dia Each 19.10

f 15mm dia Each 15.90

IV Union
a 50mm dia Each 666.00

b 40mm dia Each 369.00

c 32mm dia Each 223.40

d 25mm dia Each 138.70

e 20mm dia Each 109.90

f 15mm dia Each 70.50

V Nipple
a 50mm dia Each 441.00

b 40mm dia Each 279.80

c 32mm dia Each 191.60

d 25mm dia Each 122.70

e 20mm dia Each 80.90

f 15mm dia Each 73.70

RATE
S OF
ELCT
RICA
L
ITEM RATES FOR MATERIALS: ELECTRICAL LAMPS, FITTINGS
S OF AND CONNECTED ACCESSORIES.
WOR
KS PART - A

INCANDESCENT BULBS 230V / 250V GRADE B.C / E.S

1 WITH ISI

a 15 Watts Each 9.10

b 25 Watts Each 9.10

c 40 Watts Each 9.10

d 60 Watts Each 9.10

 e 100 Watts Each 9.10

f 200 Watts Each 18.20

INCANDESCENT BULB 230V/250V GRADE B.C/E.S

2
Colour 15 Watts Each 11.10

3 Blended Lamp 160 Watts Each 220.00

PLLAMP (PHILIPS / OSRAM)

3a
a 9 Watts Each 68.50

b 11 Watts Each 73.00

c 18 Watts Each 115.00

d 36 Watts Each 127.90

FLUORESCENT TUBULAR LAMPS WITH ISI MARK.

4
a Cool Day light 2 Ft.20 Watts Each 34.40

b Cool Day light 4 Ft.40 Watts Each 34.40

c Cool Day light 4 Ft.36 Watts Each 33.60

MERCURY VAPOUR DISCHARGE LAMP 230V GRADE 3 PIN

5 BC

a 80 Watts Each 158.00

b 125 Watts Each 166.00

c 250 Watts Each 405.00

d 400 Watts Each 572.00

6 BOX TYPE SINGLE FLUORESCENT FITTING WITH COPPER

CHOKE AND CONDENSOR COMPLETE WITH ISI MARK.

a 4. Ft 40 Watts with ballast. Each 293.00

b 4 Ft. 40 Watts Box type with Ballast. Each 431.00

(Philips / Crompton / Wipro)

7 BOX TYPE TWIN FLUORESCENT FITTING WITH COPPER

CHOKE AND CONDENSOR (HPF) COMPLETE WITH ISI
MARK.

a 4 Ft. 40 Watts Each 550.00

b 4 Ft. 40 Watts Box type of Each 718.00

(Philips / Crompton) with Ballast.
8 INDUSTRIAL TYPE FLUORESCENT FITTING STOVE
ENAMELLED WITH COPPER CHOKE AND CONDENSOR
(HPF) 4' 40 W

a Single type suitable for 1 No.tube Each 810.00

b Twin type suitable for 2 Nos. tube Each 995.00

9 DECORATIVE AND SINGLE FLUORESCENT TYPE FITTING

WITH COPPER CHOKE & CONDENSOR (HPF) COMPLETE
SUITABLE FOR ONE NUMBER FLUORESCENT TUBE WITH
ISI MARK

a 4 Ft. 40 Watts with Perspex Deleted

10 DECORATIVE TWIN FLUORESCENT TYPE FITTING WITH

COPPER CHOKE & CONDENSOR COMPLETE SUITABLE
FOR 2 NOS. FLUORESCENT TUBES

a 4' 40 W Twin Mirror optic Recessed mounting Each 1395.00

fitting.

b 4' 40 W Twin Mirror optic Suspension type fitting. Each 2515.00

(Philips / Crompton / Wipro)

c 4'40 W Twin Mirror optic Recessed mounting type Each 1845.00

Philips / Crompton / wipro.

11 SINGLE TYPE STREET LIGHT FLUORESCENT FITTING

SUITABLE FOR THE ONE NO. FLUORESCENT TUBE WITH
COPPER CHOKE & CONDENSOR COMPLETE

a 4 Ft. 40 Watts type Each 614.00

12 TWIN TYPE STREET LIGHTS FLUORESCENT FITTING

SUITABLE FOR 2 NOS. FLUORESCENT TUBES WITH
COPPER CHOKE & CONDENSOR COMPLETE

a 4 Ft. 40 Watts type Each 826.00

13 POST TOP LANTERN FITTING OF (INTEGRAL TYPE WITH

COPPER CHOKE & CONDENSOR & NECESSARY
ACCESSORIES (PHILIPS / CROMPTON GREAVES /
WIPRO) (SPHERICAL / RIBBED / CONICAL ACRYLIC
COVER)

a Suitable for 125 Watts M.V. Lamp Each 2970.00

b Suitable for 70 Watts S.V. Lamp Each 3130.00

c Post top lantern fitting with S.C. holder suitable for Each 1710.00
160W blended lamp / incandescent lamp

14 STARTERS FOR FLUORESCENT TUBES

a Starters of capacity 20 Watts Each 9.10

 b Starters of capacity 40 Watts Each 9.10

15 POLYSTER FILLED COPPER CHOKE 250V / 50HZ GRADE

SUITABLE FOR (Philips / Crompton / Wipro)

a 20 Watts fluorescent tube Each 162.00

b 40 Watts fluorescent tube Each 162.00

c 36 / 40W Electronic ballast for flu. Tube Each 269.00

(Philips / Crompton)

d 36 / 40W Electronic ballast for flu. Tube Each 219.00

(Indo Asean / Equivalent)

16 CONDENSOR FOR S.V. / M.V. LAMP

a 8 Mfd for 80 Watts Bulb Each 98.80

b 10 Mfd for 125 Watts Bulb Each 118.30

c 15 Mfd for 250 Watts Bulb Each 157.50

d 20 Mfd for 400 Watts Bulb Each 217.90

17 Battern type Bakelite Holder for lamp Each 15.80

18 Water tight bulk head fitting suitable for 100 / 60 Each 263.40
Watts lamp with guard heavy type (PHILIPS / BAJAJ
/ CROMPTON GREAVES)

19 Ceiling Rose Each 13.15

20 a Ceiling fixtures 250 / 300 mm complete with Each 155.20

Gallery etc. Clear glass opac / crystal suitable for
40 / 60 Watts Bulb.

b. Ceiling luminaire with mirror optics suitable for 2 Each 983.20

Nos. 9 watts / 11 watts (Philips / Crompton / Bajaj)

(For Items 6 to 13, 20 & 22, the rates are exclusive of

cost of tubes and lamps)

21 Fan clamp (dia 12mm) with 6mm MS side plates & Each 105.00
45 cm cross arm

22 CALL BELLS

a Call bell / Buzzer 6 mm suitable for AC / DC Each 39.50

b Push bell Each 15.80

c Gong bell 9" size suitable for 250V Each 395.00

d Gong bell 12" size suitable for 250V Each 572.00

23 WATER HEATER WITH I.S.I MARK

a Automatic Electrical Water Heater with copper Each 4790.00

container, with Glass Wool / Puf insulation with MS
powder coated shell suitable for 25 Litres capacity
230V / 1000W

b Automatic Electrical Water Heater with copper Each 6470.00

container, with Glass Wool / Puf insulation with MS
powder coated shell suitable for 25 Litres capacity
230V / 1000W (Venus / Racold)

c Automatic Electrical Water Heater with copper Each 5550.00

container, with Glass Wool / Puf insulation with MS
powder coated shell suitable for 35 Litres capacity
230V / 1000W

d Automatic Electrical Water Heater with copper Each 7430.00

container, withGlass Wool / Puf insulation with MS
powder coated shell suitable for 35 Litres capacity
230V / 1000W (Venus / Racold)

PART "B"

I FANS - CONFORMING TO ISS 374 / 1979.

a A.C Ceiling fan complete 1200 mm (48") sweep Each 1090.00

with 300mm Down rod. (without regulator)

b A.C Ceiling fan complete 1400 mm (56") sweep Each 1170.00

with 300mm Down rod. (without regulator)

c Stepped electronic 300W / 450W square type fan Each 185.50

regulator (Anchor Deluxe / Equivalent)

d Dimmer type electronic 300W / 450W square type Each 148.30

fan regulator (Anchor Deluxe / Equivalent)

e A.C. Ceiling fan complete 1200mm (48") sweep Each 1238.00

with 300mm Down rod (without regulator)
(Crompton make)

f A.C. Ceiling fan complete 1400mm (56") sweep Each 1335.00

with 300mm Down rod (without regulator)
(Crompton make)

II EXHAUST FANS

a A.C Exhaust Fan 225mm (9") sweep (Light duty) Each 1010.00

b A.C Exhaust Fan 300mm (12") sweep (Light duty) Each 1155.00

c A.C Exhaust Fan 375mm (15") sweep (Light duty) Each 1190.00

d A.C Exhaust Fan 450mm (18") sweep (Light duty) Each 1675.00
 e A.C Exhaust Fan 375mm (15") sweep (Heavy duty) Each 2200.00

f A.C Exhaust Fan 450mm (18") sweep (Heavy duty) Each 2735.00

III LOUVER SHUTTERS ARRANGEMENTS

a M.S / Fibre Louvers shutters arrangements for 300 Each 210.90

mm A.C Exhaust Fan.

b M.S / Fibre Louvers shutters arrangements for 375 Each 223.40

mm A.C Exhaust Fan.

c M.S / Fibre Louvers shutters arrangements for 450 Each 250.00

mm A.C Exhaust Fan.

PART "C"

I SWITCHES

a 5 Amps (flush type) Dozen 184.00

b 5 Amps (Flush type staircase) Dozen 229.00

II DOUBLE POLE SWITCHES (GEM / HPL / HAVELLS /

EQUIVALENT)

a 16 Amps DP switch with metal clad (Front handle) Each 395.00

b 32 Amps DP switch with metal clad (Front handle) Each 810.00

c 16 Amps DP switch with metal clad (side handle). Each 326.00

d 32 Amps DP switch with metal clad (side handle) Each 735.00

III A TRIPLE POLE SWITCHES (side Handle) (Standard / HPL /

Havell's / Equivalent)

a 100 Amps TPN Switch with HRC fuses sheet steel Each 5550.00
double break

b 125 Amps TPN Switch with HRC fuses sheet steel Each 6354.00
double break

c 200 Amps TPN Switch with HRC fuses sheet steel Each 8200.00
double break

d 315 Amps TPN Switch with HRC fuses sheet steel Each 11709.00
double break

e 400 Amps TPN Switch with HRC fuses sheet steel Each 15000.00
double break
 f 16 Amps TPN Metal clad switch with rewirable fuse Each 880.00
units.

g 32 Amps TPN Metal clad switch with rewirable fuse Each 1300.00
units.

h 63 Amps TPN Metal clad switch with rewirable fuse Each 2840.00
units.

i 100 Amps Metal clad switch with rewirable fuse Each 5580.00
units.

j 200 Amps metal clad switch with rewirable fuse Each 8450.00
units.

IV A SWITCH DISCONNECTOR FUSE UNITS IN SHEET STEEL

ENCLOSURE (SDF) (L & T / SIEMENS)

1 63A TPN switch disconnector fuse units in sheet Each 3590.00

steel enclosure with HRC fuses Double break.

2 100A TPN switch disconnector fuse units in sheet Each 6020.00

steel enclosure with HRC fuses Double break.

3 125A TPN switch disconnector fuse units in sheet Each 7122.00

steel enclosure with HRC fuses Double break.

4 200A TPN switch disconnector fuse units in sheet Each 8945.00

steel enclosure with HRC fuses Double break.

5 250A TPN switch disconnector fuse units in sheet Each 11138.00

steel enclosure with HRC fuses Double break.

6 315A TPN switch disconnector fuse units in sheet Each 13370.00

steel enclosure with HRC fuses Double break.

7 400A TPN switch disconnector fuse units in sheet Each 15370.00

steel enclosure with HRC fuses Double break.

IV B SWITCH DISCONNECTOR FUSE UNITS IN OPEN

EXECUTION (INTERIOR FOR CUBICAL) (L & T /
SIEMENS)

1 63A TPN switch disconnector fuse units interior only Each 2380.00
with HRC fuses Double break.

2 100A TPN switch disconnector fuse units interior Each 4308.00

only with HRC fuses Double break.

3 125A TPN switch disconnector fuse units interior Each 5875.00

only with HRC fuses Double break.
 4 200A TPN switch disconnector fuse units interior Each 7580.00
only with HRC fuses Double break.

5 250A TPN switch disconnector fuse units interior Each 9900.00

only with HRC fuses Double break.

6 315A TPN switch disconnector fuse units interior Each 12420.00

only with HRC fuses Double break.

7 400A TPN switch disconnector fuse units interior Each 14680.00

only with HRC fuses Double break.

V FUSE UNITS (Anchor / Equivalent)

a 16 Amps Porcelain Fuse unit (500V) Each 48.00

b 32 Amps Porcelain Fuse unit (500V) Each 85.00

c 63 Amps Porcelain Fuse unit (500V) Each 190.00

d 100Amps Porcelain Fuse unit (500V) Each 340.00

e 200 Amps Porcelain Fuse unit (500V) Each 550.00

VI SINGLE PHASE DBS (GEM / Equivalent)

a 4 Way DB 16 Amps / Way with fuse & Neutral each Each 480.00
(250V)

b 6 Way DB 16 Amps / Way with fuse & Neutral each Each 655.00
(250V)

c 8 Way DB 16 Amps / Way with fuse & Neutral each Each 810.00
(250V)

VII THREE PHASE DBS (GEM / Equivalent)

a 4 Way TPDB 16A / Way with fuse & Neutral link Each 1900.00

b 6 Way TPDB 16A / Way with fuse & Neutral link Each 2600.00

c 8 Way TPDB 16A / Way with fuse & Neutral link Each 3150.00

d 4 Way TPDB 32A / Way with fuse & Neutral link Each 2400.00

e 6 Way TPDB 32A / Way with fuse & Neutral link Each 3200.00

f 8 Way TPDB 32A / Way with fuse & Neutral link Each 4050.00

g 4 Way TPDB 63A / Way with fuse & Neutral link Each 5594.00

h 6 Way TPDB 63A / Way with fuse & Neutral link Each 7200.00

VIII CHANGE OVER SWITCHES (GEM / HAVELL'S / HPL /

STANDARD / EQUIVALENT)
 a 16 Amps three phase 500V 4 pole Change over Each 1250.00
switch

b 32 Amps three phase 500V 4 pole Change over Each 1480.00

switch

c 63 Amps three phase 500V 4 pole Change over Each 3220.00

switch

d 100 Amps three phase 500V 4 pole Change over Each 5130.00
switch

e 200 Amps three phase 500V 4 pole Change over Each 9657.00
switch

PART "D"

I a 5 Amps 3 pin & 2 pin combined flush type wall Each 24.00
socket only.

b 5 Amps / 15 Amps 3 pin flush type wall socket only. Each 54.00

c 5 Amps 3 pin Top Each 34.00

d 15 Amps 3 pin Top Each 48.00

e 15 Amps Flush type switch Each 56.00

f 10 Amps M.C plug with 3 pin top Each 180.00

g 20 Amps M.C plug with 3 pin top Each 205.00

II A SINGLE PHASE WATT HOUR METERS (HPL / Equivalent)

a A.C single phase 230V / 250V / 50 HZ 5 Amps Watt Each 954.00

Hour Meter.

b A.C single phase 230V / 250V / 50 HZ 10 Amps Each 954.00

Watt Hour Meter.

c A.C single phase 230V / 250V / 50 HZ 20 Amps Each 954.00

Watt Hour Meter.

II B THREE PHASE WATT HOUR METERS (Anchor /

Equivalent)

a A.C 3 phase 400V 50HZ unbalanced load 4 wire 10 Each 1975.00

Amps watt hour meter.

b A.C 3 phase 400V 50HZ unbalanced load 4 wire 25 Each 1975.00

Amps watt hour meter

c A.C 3 phase 400V 50HZ unbalanced load 4 wire 50 Each 2500.00

Amps watt hour meter

PART "E"
I SERVICE CONNECTION ACCESSORIES L.T. 1100V PVC
ALUMINIUM ARMOURED UNDER GROUND CABLE WITH
ISI MARK.

a 2 Core 6 sq.mm PVC armoured UG cable Metre 84.50

b 2 Core 10 sq.mm PVC armoured UG cable Metre 103.50

c 2 Core 16 sq.mm PVC armoured UG cable Metre 111.60

d 2 Core 25 sq.mm PVC armoured UG cable Metre 126.70

e 31/2 Core 25 sq.mm PVC armoured UG cable Metre 191.20

f 31/2 Core 35 sq.mm PVC armoured UG cable Metre 225.00

g 31/2 Core 50 sq.mm PVC armoured UG cable Metre 293.90

h 31/2 Core 70 sq.mm PVC armoured UG cable Metre 375.30

i 31/2 Core 95 sq.mm PVC armoured UG cable Metre 486.10

j 31/2 Core 120 sq.mm PVC armoured UG cable Metre 595.40

k 31/2 Core 150 sq.mm PVC armoured UG cable Metre 703.00

l 31/2 Core 185 sq.mm PVC armoured UG cable Metre 861.00

m 31/2 Core 240 sq.mm PVC armoured UG cable Metre 1094.20

n 31/2 Core 300 sq.mm PVC armoured UG cable Metre 1336.70

o 31/2 Core 400 sq.mm PVC armoured UG cable Metre 1712.80

p 4 Core 6 sq.mm PVC armoured UG cable Metre 109.80

q 4 Core 10 sq.mm PVC armoured UG cable Metre 120.40

r 4 Core 16 sq.mm PVC armoured UG cable Metre 158.20

II PVC INSULATED SINGLE CORE MULTI STRAND FIRE

RETARDANT FLEXIBLE COPPER CABLE WITH ISI MARK
CONFORMING TO IS:694/1990.

a 14 / 0.3 (1.0 sq.mm.) Metre 7.80

b 22 / 0.3 (1.5 sq.mm.) Metre 12.25

c 36 / 0.3 (2.5 sq.mm.) Metre 19.00

d 56 / 0.3 (4 sq.mm.) Metre 30.00

e 84 / 0.3 (6 sq.mm.) Metre 44.40

f 140 / 0.3 (10 sq.mm.) Metre 66.60

 g 101 / 0.45 (16 sq.mm.) Metre 109.10

h 168 / 0.45 (25 sq.mm.) Metre 240.00

III CONDUCTOR

a Hard drawn copper conductor (Gauge No. 8&6) KG 450.00

b 14 SWG TC wire KG 460.00

c G.I.No.8 wire and No. 6 wire KG 80.00

IV CABLE GLANDS

a Cable gland suitable for 2 core 4sq.mm UG cable. Each 17.00

b Cable gland suitable for 2 core 6 sq.mm UG cable. Each 21.00

c Cable gland suitable for 2 core 10 sq.mm UG cable. Each 25.00

d Cable gland suitable for 2 core 16 sq.mm UG cable. Each 37.00

e Cable gland suitable for 2 core 25 sq.mm UG cable. Each 44.00

f Cable gland suitable for 31/2 core 25 sq.mm UG Each 44.00

cable.

g Cable gland suitable for 31/2 core 35 sq.mm UG Each 56.00

cable.

h Cable gland suitable for 31/2 core 50 sq.mm UG Each 56.00

cable.

I Cable gland suitable for 31/2 core 70 sq.mm UG Each 69.00

cable.

j Cable gland suitable for 31/2 core 95 sq.mm UG Each 84.00

cable.

k Cable gland suitable for 31/2 core 120 sq.mm UG Each 107.00
cable

l Cable gland suitable for 31/2 core 150 sq.mm UG Each 141.00
cable

m Cable gland suitable for 31/2 core 185 sq.mm UG Each 167.00
cable

n Cable gland suitable for 31/2 core 240 sq.mm UG Each 167.00
cable

o Cable gland suitable for 31/2 core 300 sq.mm UG Each 200.00
cable
 p Cable gland suitable for 31/2 core 400 sq.mm UG Each 285.00
cable

q Cable gland suitable for 31/2 core 500 sq.mm UG Each 332.00
cable

r Cable gland suitable for 4 core 6 sq.mm UG cable Each 21.00

s Cable gland suitable for 4 core 10 sq.mm UG Each 25.00

cable.

t Cable gland suitable for 4 core 25 sq.mm UG Each 44.00

cable.

V FUSE WIRE (COPPER)

a 5 Amps fuse wire KG 450.00

b 10 Amps fuse wire KG 450.00

c 20 Amps fuse wire KG 450.00

VI NEUTRAL LINK 15 AMPS

a 4 Way Neutral link Each 23.00

b 6 Way Neutral link Each 34.15

c 8 Way Neutral link Each 42.50

d 12 Way Neutral link Each 61.65

PART "F"

M.S.BOX WITH PAINTING (16 SWG)

a M.S.Box of size (100 x 100 x 75 mm) Each 44.00

b M.S.Box of size (150 x 100 x 75 mm) Each 61.00

c M.S.Box of size (200 x 150 x 75 mm) Each 99.00

d M.S. Box complete with Lock & Key arrangements Each 300.00
with painting of size (300 x 200 x 100mm)

PART "G"

MS ANGLES

I a 11/2"x11/2"x1/4" (37.5 x 37.5 x 6.24mm) (1M=3.25 KG 42.00

kg)

b 11/2" x 11/2" x 1/2" (37.5 x 37.5 x 12.5mm) KG 42.00

c 2" x 2" x 1/2" (50 x 50 x 12.5mm) KG 42.00

II ALUMINIUM FLAT

a Aluminium Flat (1" x 1/4") (25 x 6.25mm) KG 175.00

b Aluminium Flat (1" x 1/8") KG 175.00

III COPPER FLAT

a Copper Flat (25 x 3mm) KG 450.00

b Copper Flat (25 x 6mm) KG 450.00

c Copper Flat (33 x 6mm) KG 450.00

d Copper Flat (50 x 6mm) KG 450.00

IV POWER CAPACITOR

a Power capacitor for power factor improvement with KVAR 330.00

oil filled with discharge resistance 3 phase 415 /
440V 50 HZ conforming to ISS:2384 with ISI
marking.

PART "H"

I CONDUIT MATERIALS 16 GAUGE.

a Conduit pipe 16mm (5/8") Heavy Gauge Metre 30.00

b Conduit pipe 19mm (3/4") Heavy Gauge Metre 31.00

c Conduit pipe 25mm (1") Heavy Gauge Metre 38.00

d Conduit pipe 32mm (11/4") Heavy Gauge Metre 50.00

e Conduit pipe 38mm (11/2") Heavy Gauge Metre 59.00

II CONDUIT TEE BENDS

a Conduit Tee bends 16mm (5/8") Dozen 85.00

b Conduit Tee bends 19mm (3/4") Dozen 86.00

c Conduit Tee bends 25mm (1") Dozen 102.00

d Conduit Tee bends 32mm (11/4") Dozen 106.00

e Conduit Tee bends 38mm (11/2") Dozen 133.00

f Conduit Tee bends 50mm (2") Dozen 165.00

III CONDUIT BENDS - 16 GAUGE

a Conduit solit bends 16mm (5/8") Dozen 80.00

 b Conduit solit bends 19mm (3/4") Dozen 90.00

c Conduit solit bends 25mm (1") Dozen 105.00

d Conduit solit bends 32mm (11/4") Dozen 124.00

e Conduit solit bends 38mm (11/2") Dozen 176.00

f Conduit solit bends 50mm (2") Dozen 215.00

IV CONDUIT INSPECTION BEND-16 GAUGE

a Conduit Inspection bends 16mm (5/8") Dozen 80.00

b Conduit Inspection bends 19mm (3/4") Dozen 83.00

c Conduit Inspection bends 25mm (1") Dozen 106.00

d Conduit Inspection bends 32mm (11/4") Dozen 128.00

e Conduit Inspection bends 38mm (11/2") Dozen 165.00

f Conduit Inspection bends 50mm (2") Dozen 187.00

g Conduit Inspection bends 65mm (21/2") Dozen 240.00

PART "I"

I P.V.C.(RIGID) PIPES (1.8MM THICK) WITH ISI

a P.V.C. rigid pipes 16mm (5/8") Metre 13.00

b P.V.C. rigid pipes 20mm (3/4") Metre 18.65

c P.V.C. rigid pipes 25mm (1") Metre 27.55

d P.V.C. rigid pipes 32mm (11/4") Metre 41.80

e P.V.C. rigid pipes 40mm (11/2") Metre 59.35

f P.V.C. rigid pipes 50mm (2") Metre 89.00

II P.V.C. RIGID BENDS

a P.V.C. rigid bends 16mm (5/8") Each 3.00

b P.V.C. rigid bends 20mm (3/4") Each 3.00

c P.V.C. rigid bends 25mm (1") Each 4.10

d P.V.C. rigid bends 32mm (11/4") Each 7.25

e P.V.C. rigid bends 40mm (11/2") Each 18.00

f P.V.C. rigid bends 50mm (2") Each 22.00

III P.V.C COUPLES

a P.V.C Couples 16mm (5/8") Dozen 13.00

b P.V.C Couples 19mm (3/4") Dozen 13.00

c P.V.C Couples 25mm (1") Dozen 25.00

d P.V.C Couples 32mm (11/4") Dozen 57.00

e P.V.C Couples 38mm (11/2") Dozen 123.00

f P.V.C Couples 50mm (2") Dozen 129.00

IV P.V.C. TEES

a P.V.C. Tees 16mm (5/8") Dozen 13.00

b P.V.C. Tees 19mm (3/4") Dozen 15.00

c P.V.C. Tees 25mm (1") Dozen 19.00

d P.V.C. Tees 32mm (11/4") Dozen 85.00

e P.V.C. Tees 38mm (11/2") Dozen 274.00

f P.V.C. Tees 50mm (2") Dozen 300.00

V P.V.C. SADDLES Dozen

a P.V.C. Saddles 16mm (5/8") Dozen 3.00

b P.V.C. Saddles 19mm (3/4") Dozen 3.50

c P.V.C. Saddles 25mm (1") Dozen 4.00

d P.V.C. Saddles 32mm (11/4") Dozen 5.00

e P.V.C. Saddles 38mm (11/2") Dozen 6.00

f P.V.C. Saddles 50mm (2") 12.00

VI P.V.C. JUNCTION BOXES

a Junction Boxes 1, 2, 3 & 4 way 16mm (5/8") Dozen 40.00

b Junction Boxes 1, 2, 3 & 4 way 19mm (3/4") Dozen 40.00

c Junction Boxes 1, 2, 3 & 4 way 25mm (1") Dozen 47.00

d Junction Boxes 1, 2, 3 & 4 way 32mm (11/4") Dozen 105.00

e Junction Boxes 1, 2, 3 & 4 way 38mm (11/2") Dozen 125.00

VII P.V.C. HYLEM SHEETS

 a Hylem sheet 3mm Thick Sq.m 610.00

VIII INSULATION TAPE P.V.C

a PVC Insulation Tape (19mm) Roll/10mt 15.00

b Empire Tape (12mm) Roll/10mt 20.00

c Empire Tape (19mm) Roll/10mt 24.00

PART "J"

TEAK WOOD MATERIALS

I T.W. BOX CONCEALED TYPE

a T.W. Box concealed type 12" x 8" x 3" Each 75.00

b T.W. Box concealed type 8" x 6" x 3" Each 40.00

c T.W. Box concealed type 6" x 4" x 3" Each 18.00

d T.W. Box concealed type 4" x 4" x 3" Each 15.00

e T.W. Plugs 11/2" x 1" x 2" 1000 Nos. 310.00

f T.W. Round blocks 100 Nos. 600.00

PART " K"

CRIMPING LUGS SUITABLE FOR THE FOLLOWING SIZES

I

Size
Aluminimum

a 4.0 Sq.mm Each 1.40

b 6.0 Sq.mm Each 1.60

c 10.0 Sq.mm Each 2.00

d 16.0 Sq.mm Each 2.00

e 25.0 Sq.mm Each 3.00

f 35.0 Sq.mm Each 4.00

g 50.0 Sq.mm Each 6.00

h 70.0 Sq.mm Each 8.00

j 95.0 Sq.mm Each 9.00

j 120.0 Sq.mm Each 12.00

 k 150.0 Sq.mm Each 16.00

l 185.0 Sq.mm Each 21.00

m 225.0 Sq.mm Each 31.00

n 240.0 Sq.mm Each 34.00

o 300.0 Sq.mm Each 47.00

p 400.0 Sq.mm Each 70.00

II CABLE ROUTE INDICATOR

a Cable route indicator for L.T. Cable Each Box 70.00

b Cable route indicator for H.T. Cable Each Box 70.00

PART "L"

I BRASS SCREWS

a Brass Screws (20mm) 3/4" No.6 Gross 65.00

b Brass Screws (25mm) 1" No.6 Gross 70.00

c Brass Screws (40mm) 11/2" No.6 Gross 75.00

d Brass Screws (20mm) 3/4" No.8 Gross 65.00

e Brass Screws (25mm) 1" No.8 Gross 70.00

f Brass Screws (50mm) 2" No.10 Gross 145.00

g Brass Screws (75mm) 3" No.10 Gross 215.00

II Coach screws 2" x 1/4" (50 x 6.25mm) Dozen 13.00

III CONDUIT SADDLES

a Conduit Saddles 16mm (5/8") Gross 40.00

b Conduit Saddles 19mm (3/4") Gross 42.50

c Conduit Saddles 25mm (1") Gross 50.00

d Conduit Saddles 32mm (11/4") Gross 65.00

e Conduit Saddles 38mm (11/2") Gross 80.00

f Conduit Saddles 50mm (2") Gross 90.00

g Conduit Saddles 65mm (21/2") Gross 103.00

IV A SODIUM VAPOUR FITTINGS & LAMP (for External
electrification & campus lighting)

a 250 Watts Sodium Vapour fittings Each 3180.00

b 250 Watts Sodium Vapour Lamp Each 700.00

c 150 Watts Sodium Vapour fittings Each 3130.00

d 150 Watts Sodium Vapour Lamp Each 600.00

e 70 Watts Sodium Vapour fittings Each 2525.00

f 70 Watts Sodium Vapour Lamp Each 400.00

V B SODIUM VAPOUR LAMP FITTING SINGLE PIECE DIE CAST

ALUMINIUM HOUSING AND LAMP FOR HEAVY TRAFFIC
ROADS (PHILIPS / CROMPTON GREAVES / WIPRO /
BAJAJ)

a 400 Watts Sodium Vapour fittings Each 9500.00

b 400 Watts Sodium Vapour Lamp Each 985.00

c 250 Watts Sodium Vapour fittings Each 6450.00

d 250 Watts Sodium Vapour lamp Each 800.00

e 150 Watts Sodium Vapour fittings Each 6060.00

f 150 Watts Sodium Vapour Lamp Each 650.00

g 70 Watts Sodium Vapour fittings Each 2600.00

h 70 Watts Sodium Vapour Lamp Each 450.00

VI MINIATURE CIRCUIT BREAKERS 240 V / 415V 50 HZ -

AC SUPPLY suitable for both lighting and Motor Circuits.

Legrand / Hager

a Single Pole 6 A to 32A, 10KA Each 184.00

b Single Pole 40A, 10KA Each 375.00

c Single Pole & Neutral 6 A to 32A,10KA Each 534.00

d Single Pole & Neutral 40A,10KA Each 865.00

e Double Pole 6 A to 32A,10KA Each 534.00

f Double Pole 40A,10KA Each 865.00

g Triple Pole 6 A to 32A,10KA Each 859.00

 h Triple Pole 63A,10KA Each 1328.00

I Triple Pole & Neutral 6 A to 32A,10KA Each 1140.00

j Triple Pole & Neutral 63A,10KA Each 1708.00

k Four Pole 6 A to 32A,10KA Each 1140.00

l Four Pole 63A,10KA Each 1708.00

VII PLUG AND SOCKETS IN SHEET STEEL ENCLOSURE

WITHOUT M.C.B.S
Legrand (MDS) /
Hager (L&T)

a 10 A Single Pole Each 884.00

b 20 A Single Pole Each 949.00

c 20 A Double Pole Each 1029.00

d 20 A Triple Pole Each 1751.00

e 32 A Triple Pole Each 2075.00

f 63 A Triple Pole Each 8410.00

VIII 1 RCCB / ELCB

a 10 Amps 30 MA DP Each 2497.00

b 25 Amps 30 MA DP Each 2074.00

c 40 Amps 30 MA DP Each 2284.00

2 RCCB / ELCB

FOUR POLE

a 25 Amps 30 MA Each 2835.00

b 40 Amps 30 MA Each 2873.00

c 63 Amps 30 MA Each 3319.00

IX HRC - FUSES

a 16 Amps Each 56.00

b 32 Amps Each 58.00

c 63 Amps Each 120.00

 d 125 Amps Each 280.00

e 160 Amps Each 350.00

f 200 Amps Each 360.00

g 250 Amps Each 500.00

X MCB ISOLATORS

Legrand (MDS) /
Hager (L&T)

A a 32A - DP Each 282.00

b 32A - TP Each 470.00

c 32A - FP Each 538.00

B a 40A - DP Each 389.00

b 40A - TP Each 674.00

c 40A - FP Each 871.00

C a 63A - DP Each 520.00

b 63A - TP Each 781.00

c 63A - FP Each 951.00

D a 100A - DP Each --

b 100A - TP Each 624.00

c 100A - FP Each 1001.00

XI HORIZONTAL THREE PHASE DISTRIBUTION BOARD

WITH MCBS
4 way / 6 way / 8 way / 12 way TPMCB sheet steel
distribution boards flush type / surface type fitted with
bus bars and neutral links with single / three phase MCB
outgoings and separate 4 way provision for Legrand (MDS) /
accommodating One No. 4 pole incoming MCB / Isolator Hager (L&T)
and another separate 4 way provision for accommodating
One No. 4 pole ELCB / RCD with label holder and
provisions for taking up cable for size not less than 35
sq.mm.

I Module type with IP 20 protection

a 4 ways 3 phase DB Each 1674.00
No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12

b 6 ways 3 phase DB Each 2074.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 18

c 8 ways 3 phase DB Each 2465.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

d 12 ways 3 phase DB Each 3667.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36

II TPMCB DB with metal door cover with IP 42 protection

a 4 ways 3 phase DB Each 2261.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12

b 6 ways 3 phase DB Each 2790.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 18

c 8 ways 3 phase DB Each 3342.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

d 12 ways 3 phase DB Each 4927.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36

III TPMCB DB with acrylic door cover with IP42 protection

a 4 ways 3 phase DB Each 2629.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12
 b 6 ways 3 phase DB Each 3230.00
No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 18

c 8 ways 3 phase DB Each 3850.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

d 12 ways 3 phase DB Each 5866.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36

IV Industrial type TPMCB DB with IP 54 protection

a 4 ways 3 phase DB Each 6364.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12

b 6 ways 3 phase DB Each 7659.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 18

c 8 ways 3 phase DB Each 8377.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

d 12 ways 3 phase DB Each 11700.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36

XII VERTICAL THREE PHASE DISTRIBUTION BOARD WITH

MCBS
4 way / 8 way / 12 way vertical TPMCB sheet steel
distribution boards flush type / surface type fitted with
bus bars and neutral links with single / three phase MCB
outgoings and separate 4 way provision for Legrand (MDS) /
accommodating One No. 4 pole incoming MCB / Isolator Hager (L&T)
and another separate 4 way provision for accommodating
One No. 4 pole ELCB / RCD with label holder and
provisions for taking up cable for size not less than 35
sq.mm.

I Module type with IP 20 protection

a 4 ways 3 phase DB Each 4650.00
No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12

b 8 ways 3 phase DB Each 5738.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

c 12 ways 3 phase DB Each 8350.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36

II TPMCB DB with metal door cover with IP 42 protection

a 4 ways 3 phase DB Each 5397.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12

b 8 ways 3 phase DB Each 6833.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

c 12 ways 3 phase DB Each 9148.00

No. of ways incomer MCB / Isolatore - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36

III TPMCB DB with acrylic door cover with IP42 protection

a 4 ways 3 phase DB Each 6514.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12

b 8 ways 3 phase DB Each 8278.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

c 12 ways 3 phase DB Each 11044.00

No. of ways incomer MCB / Isolatore - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36
 IV Industrial type TPMCB DB with IP 54 protection

a 4 ways 3 phase DB Each 10110.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 12

b 8 ways 3 phase DB Each 12184.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 24

c 12 ways 3 phase DB Each 16365.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of outgoings ways - 36

XIII 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD

WITH MCB
4 way / 6 way / 8 way / 12 way TPMCB sheet steel
distribution boards flush type / surface type fitted with
bus bars and neutral links with single / three phase MCB
outgoings and separate 4 way provision for
accommodating One No. 4 pile incoming MCB / Isolator
and another separate 4 way provision for accommodating Legrand (MDS) /
One No. 4 pole ELCB / RCD (totally 8 ways in one Hager (L&T)
segment) (3 x 4 ways in each segment) and separate
provisions for MCB / Isolator (totally 12 Nos.) for sub
incomers in 3 segments with label holder and provisions
for taking up cable for size not less than 35 sq.mm.

I Module type with IP 20 protection

a 4 ways 3 phase DB Each 5013.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 12

b 6 ways 3 phase DB Each 5377.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 18

c 8 ways 3 phase DB Each 5709.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 24
 d 12 ways 3 phase DB Each 6576.00
No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 36

II TPMCB DB with metal / acrylic door cover with IP 42

protection

a 4 ways 3 phase DB Each 5328.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 12

b 6 ways 3 phase DB Each 6000.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 18

c 8 ways 3 phase DB Each 6700.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 24

d 12 ways 3 phase DB Each 8515.00

No. of ways incomer MCB / Isolator - 4
No. of ways incomer ELCB / RCD - 4
No. of sub-incomers - 12
No. of outgoings ways - 36

XIV SINGLE PHASE DISTRIBUTION BOARD WITH MCBs

4 way / 8 way / 12 way vertical SPMCB sheet steel
distribution boards flush type / surface type fitted with
bus bars and neutral links with single phase MCB
outgoings and separate 2 way provision for
accommodating One No. 2 pole incoming MCB / Isolator Legrand (MDS) /
and another separate 2 way provision for accommodating Hager (L&T)
One No. 2 pole ELCB / RCD with label holder and
provisions for taking up cable for size not less than 35
sq.mm.

I Module type with IP 20 protection

a 4 ways 3 phase DB Each 612.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 4
b 4 ways 3 phase DB Each 766.00
No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 8

c 4 ways 3 phase DB Each 906.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 12

II SPMCB DB with metal door cover with IP 42 protection

a 4 ways 3 phase DB Each 891.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 4

b 4 ways 3 phase DB Each 1113.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 8

c 4 ways 3 phase DB Each 1341.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 12

III SPMCB DB with acrylic door cover with IP42 protection

a 4 ways 3 phase DB Each 1056.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 4

b 4 ways 3 phase DB Each 1244.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 8

c 4 ways 3 phase DB Each 1505.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 12

IV Industrial type TPMCB DB with IP 54 protection

a 4 ways 3 phase DB Each 2669.00
No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 4

b 4 ways 3 phase DB Each 3135.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 8

c 4 ways 3 phase DB Each 3615.00

No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 12
 RATES OF MATERIAL

Sch. Item
Sl. No. Description
No.

Cement

Steel

A BRICKS AND TILE PRODUCTS

1 Second Class Table Moulded Chamber Burnt Bricks

1 a 9" x 41/2" x 3"

2 b 9" x 43/8" x 23/4"

2 Second Class Ground Moulded Chamber Burnt Bricks

3 a 9" x 41/2" x 3"

4 b 9" x 43/8" x 23/4"

3 Third Class Country Brick Kiln Burnt

5 a 83/4" x 41/4" x 23/4"

6 b 83/4" x 41/4" x 21/4"

7 c 83/4" x 41/4" x 2"

3A Fly Ash Bricks

8 a Fly Ash Bricks 230x110x70mm

b 230x110x75mm

4 Specially moulded country brick for well steining

9 a 83/4" x 41/4" x 2"

10 b Perforated bricks 19 x 9 x 9cm

11 c Terrace bricks 15 x 7.5 x 2.5cm

8 Flat Tiles
12 a 15cm x 15cm x 12mm

13 b 15cm x 15cm x 20mm

10 Brick Jelly

14 a 40mm size

15 b 20mm size

11 Pressed Tiles

16 a 20 x 20 x 2cm

17 b 23 x 23 x 2cm

12 Pan Tiles

18 a 23cm x 8cm x 1.7cm

19 b 16.5cm x 8cm x 1.7cm

13 Best Mangalore Tiles

20 a I Class'A'

21 b Class 'AA'

22 c Best Mangalore Ridge Tiles

23 d Best Mangalore Ceiling Tiles

24 e Best Mangalore Glass Roofing Tiles

25 f Best Mangalore Ventilating Tiles (Single)

26 g Best Mangalore Ventilating Tiles (Double)

23A Mosaic Flooring Tiles (Grey)

a Mosaic (Grey) Tile 25 x 25 x 2cm

28 b Mosaic (Grey) Tile 20 x 20 x 2cm

23C Mosaic (other Colour)

29 a Mosaic (other colour) Tile 25 x 25 x 2cm

30 b Mosaic (other colour) Tile 20 x 20 x 2cm

31 c Mosaic (Green) Tile 20 x 20 x 2cm

32 d Mosaic (Green) Tile 25 x 25 x 2cm

33 24 Mosaic Chequered tile Grey colour size 25 x 25 x 2cm

B STONE AND ROAD MATERIALS

34 27 Rough stone for masonry works (Hard Granite)

35 28 Rough stone for revetment works

36 29 Jeddy size for Revetment (Hard Granite)

37 29a Cut stone pillar of size 0.15 x 0.15 x 2.1m

38 30 From boulders without blasting for revetment

39 30a From boulders without blasting for masonry

40 32 Course Rubble stone for masonry works

41 33 Course Rubble stone for Arch works

42 33 (A) I Chisel dressed stone 70cm x 30cm x 29cm

43 II Chisel dressed stone 37cm x 30cm x 29cm

44 (B) Hammer dressed stone 37cm x 30cm x 29cm

45 34 Cutstone fully dressed to size on all faces

46 35 Cut stone Roughly dressed

47 36 Ashlar arch stone fully dressed to size all faces

48 38 Flooring stone SS Size (Not less than 10cm thick)

49 39 a Stone slab for culvert (3 faces one line dressed) Above 1.2m

50 b Stone slab for culvert (3 faces one line dressed) Upto 1.2m

51 40 Stone slab for culvert (3 faces two line dressed)

52 41 For Lintel coping (3 faces two line dressed)

53 42 Bond Stones

54 43 a Kilometre stone 1.65 x 0.45 x 0.15m

55 44 a Hecta metre stone 0.9x0.1x0.1m

56 b Hecta metre stone 0.75x0.23x0.1m

57 c Hecta metre stone 0.9x0.15x0.15m

Demarcation Stone (two line dressed for top 30 cm) 75 x 15 x

58 45 a
15 cm

Demarcation Stone (two line dressed for top 30 cm) 90 x 23 x

59 b
23 cm

Demarcation Stone (two line dressed for top 30 cm) 75 x 23 x

60 c
23 cm

Demarcation Stone (two line dressed for top 30 cm) 90 x 15 x

61 d
15 cm

62 e DemarcationStone with letter cut 75 x 15 x 15cm

63 f Edge Stone 45 x 15 x 15 cm

T.R.S. Bench mark stone the exposed surface neatly dressed to

64 g(i)
a height of 15cm including cutting letters 15 x 15 x 60cm

T.R.S. Bench mark stone the exposed surface neatly dressed to

65 g(ii)
a height of 15cm including cutting letters 10 x 10 x 25cm

66 46 a Guard Stone (Two line dressed for 45 cm) 23cm dia 1.0m long

Guard Stone (Top 0.7m chisel dressed and 0.50m bottom

67 b roughly dressed) 0.23 x 0.23 x 1.20m long. Two line dressed
top 45cm) 23cm dia 1.0m long

Guard Stone (Top 0.7m chisel dressed and 0.50m bottom

68 c roughly dressed) 0.23 x 0.23 x 0.90m long. Two line dressed
top 45 cm) 23cm dia 0.90m long

Guard Stone (Top 0.7m chisel dressed and 0.50m bottom

69 d roughly dressed) 0.15 x. 0.15 x 0.90m long. Two line dressed
top 45 cm) 23cm dia 0.90m long

70 e Guard Stone 23 cm dia 0.90cm long

 Hard Broken Granite Stone Jelly (I.S.S.) Machine
48
crushed / Hand broken

71 I HBGS Jelly 90 mm size

72 ii HBGS Jelly 80 mm size

73 iii HBGS Jelly 63 mm size

74 iv HBGS Jelly 50 mm size

75 v HBGS Jelly 40 mm size

76 vi HBGS Jelly 25 mm size

77 vii HBGS Jelly 20 mm size

78 viii HBGS Jelly 12 mm size

79 ix HBGS Jelly 10 mm size

80 x HBGS Jelly 6 mm size

81 xi HBGS Jelly 3 mm size

49 A Broken Stone from surface stone & boulders

82 I Broken Stone from surface stone & boulders 40mm size

83 ii Broken Stone from surface stone & boulders 50mm size

84 iii Broken Stone from surface stone & boulders 60mm size

85 iv Broken Stone from surface stone & boulders 75mm size

49 b Quartz metal

86 I Quartz metal 50 mm

87 ii Quartz metal 40 mm

51 Soft Broken Stone

88 I Soft Broken Stone 63mm size

89 ii Soft Broken Stone 40mm size

90 52 Laterite 40 to 75mm size

91 53 Kankar 40 to 75mm size

92 54 Soling stones unblasted 15cm cube

93 54a Soling stones blasted 15cm cube

94 57 Gravel

95 57A Well Gravel

96 57B Screened Kankar Gravel

97 58 Quarry Rubbish

98 58A Stone Dust

99 58B Pond Ash (wet / dry)

58c Crushed stone sand

100 59 Sand for Mortar

101 60 Sand for Filling

102 62 Clay for Puddle & Masonry

103 63 (I) Cuddapah Slab 50mm Thick

104 ii Cuddapah Slab 38 / 40mm Thick

105 iii Cuddapah Slab 20 / 30mm Thick

C LIME

106 66 Shell lime (Slaked & Screened)

107 67 Freshly Slaked & Screened Burnt Lime Stone

108 68 Stone Lime or Lime Metal

D.Timber and Roofing Materials

109 71 TW Scantlings (over 3m for joist and rafters) - Malabar

110 72 TW Scantlings (for Tie beams and principal rafters) - Malabar

111 73 TW Scantlings (over 2m & below 3m in length) - Malabar

112 74 TW Scantling (below 2m in length) - Malabar

113 75 (I) TW Planks (Over 45cm wide & 12mm Thick)

114 ii TW Planks (30 - 45cm wide & 12mm Thick)

115 iii TW Planks (30 - 45cm wide & 12 - 25mm Thick)

116 iv TW Planks (30 - 45cm wide & 25 - 40mm Thick)

117 v TW Planks (15 - 30cm wide & 12mm Thick)

118 vi TW Planks (15 - 30cm wide & 12-25mm Thick)

119 vii TW Planks (15 - 30cm wide & 25- 40mm Thick)

120 viii TW Planks (Upto 15cm wide & 12mm Thick)

121 ix TW Planks (Upto 15cm wide & 12-25mm Thick)

122 xiii TW Planks (Upto 15cm wide & 25-40mm Thick)

 76 Teak wood Reepers

123 I TW Reepers 50 x 25mm

124 ii TW Reepers 50 x 12mm

77 Country Wood Scantling

125 I CW Scantling (upto 4m in length)

126 ii CW Scantling (over 4m in length)

127 77A CW Scantling (for tie beams & Principal rafters for trusses)

128 77B Jack wood Scantlings (upto 4 m)

129 77D Silver oak Scantlings

78 Country Wood Planks

130 I CW Planks (upto 30cm wide-40mm thick)

131 ii CW Planks (upto 30cm wide-25mm thick)

132 iii CW Planks (over 30cm wide-40mm thick)

133 iv CW Planks (over 30cm wide-25mm thick)

134 78A JW Planks (25mm-40mm thick)

135 78B Silver Oak Plank (40mm thick)

136 78C Bluegum Plank

79 Country Wood Reepers

137 i CW Reepers (50 x 25mm)

138 ii CW Reepers (50 x 12mm)

139 80 Mango plank

140 81 Palmyrah rafter (50 - 60mm wide & 125mm depth)

141 a Palmyrah Leaves

142 b Palmyrah Leaves (Labour for cutting)

90 Casurina poles

143 a Casurina poles 13cm - 15cm dia

144 b Casurina poles 10cm - 13cm dia

145 c Casurina poles 8cm - 10cm dia

146 d Casurina poles 5cm - 8cm dia

90.1 Eucalyptus Poles

147 a 13cm to 15cm dia

148 b 10cm to 13cm dia

149 c 8cm to 10cm dia

150 d 5cm to 8cm dia

151 e below 5cm

152 90.2 Eucalyptus Bullies 4cm to 5cm dia and cross ties

153 91 Casurina Bullies 4cm - 5cm dia and cross ties

154 92 Bamboo Large (10cm dia and above)

155 93 Bamboo (7.5cm - 10cm dia)

E. Metal and Iron Items

156 111 Mild steel plates or sheets BG 10

157 112 Mild steel Angles 25 x 25 x 3 mm

158 113 Binding wire (Black 18 G)

159 113 b Binding wire (Galvanised-18 G)

160 114 G.I. Sheets 30cm wide and 1.6 mm Thick

161 126 I Weld mesh 7.5 x 2.5cm. 10 Gauge

162 ii Weld mesh 7.5 x 5cm. 10 Gauge

163 iii Weld mesh 10 x 10cm. 10 Gauge

164 129 Chicken mesh

165 130 Fly proof mesh

Suplying miled steel grills for windows ventilators etc., including

166 131
priming coat
 NEW ITEM

Tactile paver type of new tek BT Yelloe colour ceramic

1 20 tiles of size 305x305x15mm for vesion Impairment
person.

Providing polymer coating (water proof coating) for

2 200
sunken portion of toilet

Providing Cornice Work for Gyp Board False

3 201 Ceiling

8mm thick Calcium Silicate Board Designed and

4 202 Perforated for False Ceiling

Termite Proof/Water Proof Plywood 19mm thick

5 203

Laminated Sheet 0.8mm thick (inside)

6 204

7 205 Laminated Sheet 1mm thick (outside)

32 Nosing for Granite Slab

A single nosing

B Double nosing

33 Grooving the granite slab

New item

New Item

99 Brass Hinges

A 125mmx30mm

B 100mmx30mm
C 75mmx30mm

D 50mmx30mm

101 Brass Tower Bolt

A 400mmx12mm
B 300mmx12mm

C 200mmx12mm
D 150mmx12mm
E 100mmx10mm
F 75mmx10mm

103 Brass Aldrops

A 300mmx16mm
B 250mmx16mm

C 200mmx16mm
D 200mmx12mm

106 Brass Ornamental Handles

A 200 mm

B 150 mm
C 100 mm

147 Painting with wall with Texture finish paint including

Labour chareges

148 White wall putty powder

a sand paper( water proof Abrasive sheet)
b 8"' putty blade
c 6"' putty blade

149 300 mm Dia RCC Hume Pipe

160 CP wall Mixer Tap 3 in 1 system with hand showers

161 CP two way Bib cock with Health Facet

162 CP shower Arm with head shower rose
166 UPVC Adhesive
167 CPVC Adhesive
168 Vajjram
184 SS stainless sink
A 600 x600x 200
B 600x450x200
186 S & F stainless sink of size 1200x550x180
187 S & F Granite sink soize 600x600x250
188 S &F Oranmental type white glaged Porcelin Corner L
type Wash hand basin size 350mm
189 S&F of Ovel Shafe Wash hand basin of size 560x450
190 S & F White glazed porcelin ovel shafe special type Urinal
of size 382 x398x601
22 SRC Cement (sulpate Resistant cement)
23 Slag cement

21 Providing and filling the trile joint with nepoxy grout

with following specification

38 PVC Trim (Beding)

124 Providing cup-board shutter using termite / water proof

plywood of 19mm thick over which laminated sheet

170 CP Heavy duty Bottle trap 32mm

171 CP Angle Cock Tap

248 Provinding Strong Room Door For Sub- Treasuries

284 Manhole cover SFRC
a 600mm x 600mm

b 750mm x 750mm
c 900mm x 900mm
285 Incinerator for Ladies Bath room ( For school works)

286 Polycarbonate sheet 6mm thick

 64 Mentonite powder for construction Quality
New item

79 S&F Shad net (green net) for under construction high rise
bld

100 steel door for window fittings

New item
a 200mm lenth hold fast
b 300mm hinges (heavy Duty)
New item
250mm lenth Tower bold

c
250x16 mm Aldrop
200mm MS handle heavy duty

Window stay
stopper and handle
277 Tamil Brass letter
25 cm
20 cm
15 cm

278 New Item

English Stainless steel letters

a 60 cm 24''

b 25 cm 10''

Tamil Stainless steel letters

a 60 cm 24''

b 25 cm 10''
-1140

-805

-1140

-805
By pasting

62.10
75.00
65.80
111.40

69.60
83.40
131.90
153.30

97.30
118.00
159.90
172.90

125.20
139.10
187.80
223.10

159.90
208.50
264.10
283.90

69.60
83.40
104.10
118.00

104.10
125.20
167.10
181.10

125.20
146.00
195.20
226.90

173.70
223.10
277.70
318.60

187.80
215.70
271.60
305.70

208.10
236.60
298.60
348.00

62.10
83.40
97.30
111.40
139.10

83.40
125.10
34.40
55.50
82.30

346.00
388.00
447.00
505.00

360.00
411.00
476.00
579.00

108.40
116.00
130.50
144.30

35.70
64.70
86.80
122.80
173.90
663.0624
Copper

4.00

4.00

5.00

6.00

10.00

11.00

13.00

21.00

26.00

36.00
46.00

70.00

100.00

100.00

135.00

205.00
 All other
makes with
ISI (Std.) /
HPL / Havell's
/ Equivalent)

135.00

280.00

405.00

560.00

445.00

610.00

670.00
 1080.00

875.00

1360.00

935.00

1440.00

All other
makes with
ISI (Std.) /
HPL / Havell's
/ Equivalent)

530.00

535.00

--

1010.00

1370.00

--

1835.00

1585.00

1680.00

1945.00

1995.00

2275.00

30.00

50.00

63.00
 140.00

189.00

189.00

279.00

All other
makes with
ISI (Std.) /
HPL / Havell's
/ Equivalent)

--

--

--

270.00

495.00

603.00

342.00

538.00

630.00

441.00

702.00

768.00

All other
makes with
ISI (Std.) /
HPL / Havell's
/ Equivalent)
1050.00

1315.00

1595.00

2175.00

1795.00

2270.00

2780.00

3764.00

--
 --

--

--

--

--

--

--

All other
makes with
ISI (Std.) /
HPL / Havell's
/ Equivalent)
3390.00

4525.00

5525.00

4435.00

5450.00

6700.00

--

--

--
 --

--

--

All other
makes with
ISI (Std.) /
HPL / Havell's
/ Equivalent)

--

--

--
 --

--

--

--

--

All other
makes with
ISI (Std.) /
HPL / Havell's
/ Equivalent)

333.00
423.00

576.00

585.00

795.00

1025.00

--

--

--
--

--

--
S OF MATERIAL
RATES OF

Sl. Schedule
Unit Rate
No. Item No.

MT 6040.00

MT 58000.00

1 1

1000 Nos. 7887.00 2 2

1000 Nos. 7585.00 3 3

4 4

1000 Nos. 6795.00 5 5

1000 Nos. 6595.00 6 9

7 9C

1000 Nos. 5709.00 8 9D

1000 Nos. 4489.00

1000 Nos. 4299.00 9

10 10

1000 Nos 6595.00 11 11

1000 Nos 6795.00 31 38A

12 11A

1000 Nos. 2526.00 13 11B

1000 Nos. 3854.00 14 12

1000 Nos. 989.00 15 13

16 14
1000 Nos. 8087.00 17 15

1000 Nos. 9604.00 18 16

19 17

cu.m. 705.00 20 18

cu.m. 786.00 21 19

22 20

1000 Nos. 11356.00 23 22

1000 Nos. 16106.00 24 23

25 24

1000 Nos. 441.35 26 25

1000 Nos. 363.30 27 26

28 27

1000 Nos. 10594.00 29 28

1000 Nos. 10807.00 30 29

1000 Nos. 31007.00 31 32

1000 Nos. 6514.00 32 33

Each 304.00 33 34

Each 45.45 34 36

Each 57.55 35 37

36 38

1000 Nos. 11907.00 30 38

1000 Nos. 7605.00 38 38B

39 38C

1000 Nos. 16432.00 40 38D

1000 Nos. 9696.00 41 38E

1000 Nos. 11907.00 42 38F

1000 Nos. 18674.00 43 38G

1000 Nos. 14948.00

44 39

cu.m. 449.40 45 39A

cu.m. 46 40A

cu.m. 47 42A

Each 165.60 48 42B

cu.m. 49 44

cu.m. 147.45 50 46

cu.m. 358.50 51 46A

cu.m. 388.80 52 47

Each 53 48

Each 54 49

Each

cu.m. 55 49

cu.m. 56 50

cu.m. 4893.00 57 50A

cu.m. 356.50 58 50B

cu.m. 59 50C

cu.m. 60 50D

cu.m. 61 61

cu.m. 62 62

cu.m. 648.40 63 67

Each 64 67A

Each 65 72

Each 66 76
Each 67 77

Each 68 78

Each 69 78A

Each 70 79

Each 71 A

Each 72 B

Each 73 80

Each 74 81

Each 75 82A

Each 76 84

Each 77 85

Each

Each 78 86

Each 79 88
 80 89

cu.m. 457.70 81 90

cu.m. 512.50 82 90A

cu.m. 591.70 83 91

cu.m. 687.00 84 92A

cu.m. 1069.80 85 92B

cu.m. 919.00 86 92C

cu.m. 1489.00

cu.m. 1382.00 87 1
cu.m. 1016.00 88 1a

cu.m. 687.00 89 2

cu.m. 618.00 a a

b b

cu.m. 90 3

cu.m.

cu.m. A

cu.m. 91 1

92 2

cu.m. 97.75 B

cu.m. 98.75 93 1

94 2

cu.m.

cu.m. A

cu.m. 97.75 95 1
cu.m. 97.75 96 2

cu.m. 114.10 97 3

cu.m. 185.80 B

cu.m. 222.70 98 1

cu.m. 166.50 99 2

cu.m. 121.90 100 3

cu.m. 96.65

cu.m. 123.70 101 1

cu.m. 95.65 102 2

Cum 1338.00

cu.m.

cu.m. 103 156 A

cu.m. 37.35 104 156B

sq.m. 425.00 105 156C

sq.m. 408.00 106 156D

sq.m. 376.70 107 156E

108 156F

cu.m. 1348.00 109 156G

cu.m. 993.00 110 156H

cu.m. 85.60 111 156 I

cu.m. 116600.00 112 318

cu.m. 114700.00 113 319

cu.m. 111600.00 114 320

cu.m. 99400.00 115 321

cu.m. 123100.00

cu.m. 114300.00 116 338

cu.m. 107000.00 117 339

cu.m. 102600.00

cu.m. 99900.00 118 357

cu.m. 95000.00 119 357A

cu.m. 93100.00 120 357B

cu.m. 91300.00 121 357C

cu.m. 91300.00 122 357 D

cu.m. 86200.00 123 357 E

 124 357 F

RM 76.00

RM 61.00 125 369 B

126 369 B(i)

cu.m. 34300.00 127 (ii)

127 (ii)

cu.m. 36200.00 128 (iii)

cu.m. 36200.00

cu.m. 37900.00 129 375A

cu.m. 15500.00 130 375B

131 378A

cu.m. 39400.00 132 378B

cu.m. 39400.00

cu.m. 39400.00 133 1

cu.m. 39400.00 134

cu.m. 41300.00 135 2

cu.m. 17600.00 136

cu.m. 18100.00 137 3

138
 RM 34.60 139 4

RM 24.90 140

cu.m. 16700.00 141 5

RM 49.50 142

100 Nos. 255.00 143 6

100 Nos. 40.20 144

145 7

RM 33.00 146

RM 25.20 147 8

RM 19.20 148

RM 17.50 149 9

150

RM 33.00

RM 23.60 151 1

RM 19.20 152 2

RM 16.40 153 3

RM 15.00 154 4

RM 12.00 155 6

RM 13.50 156 7
 RM 12.00 157 8

RM 10.60 158 11

159 12

Kg 53.00 160 13

Kg 53.00 161 14

Kg 56.35 162 19

Kg 56.35 163 20

sq.m. 391.10 21

sq.m. 379.90 164 a

sq.m. 339.60 165 b

sq.m. 183.80 166 22

sq.m. 40.65 167 23

sq.m. 116.55

1Kg 70.15 168 50 A

 169 50 B

sqm. 2040.00 170 50 C

sqm. 329.00 69

RM 190.40 171 I

sqm. 1545.00 172 ii

sqm. 1339.00 173 iii

sqm. 246.40 174 iv

sqm. 412.00

175 121

Rm 195.70 176 125

Rm 370.25
177 125A

Rm 303.00

178 127

179 128
Each 214.10
119 119
Each 183.60
Each 152.60
394

Each 127.45

Each 1020.00
Each 764.00

Each 540.00
Each 408.00
Each 326.00
Each 204.00

Each 968.00
Each 836.00

Each 714.00
Each 510.00

Each 396.90

Each 254.50
Each 182.80

Srm 412.00

kg 27.45
Each 10.20
Dozen 122.30
Dozen 91.80

Rm 2250.00

Each 4146.00

Each 2060.00
 Each 1181.00
100 gm 84.80
100 gm 116.50
Kg 78.45

Each 9180.00
Each 7140.00
Each 18540.00
Each 4141.00
Each 3553.00

Each 2899.00
Each 10060.00

50kg/Bag 311.00
50kg/Bag 279.00

Sqm 438.00

Rm 95.40

Sqm 5047.00

Each 1105.00
Each 776.00

Each 298750.00

Each

Each
Each
Each

Srm
Kg

Srm

Each 168.00
Each 117.60
Each 128.80

Each 235.30
Each 84.00

Each 156.90
Each 145.70
Each 1682.00
Each 1274.00
Each 2040.00

Each 3434.00

Each 1464.00

Each 3656.00

Each 1818.00
 RATES OF WORKS

Description Unit Rate

A. Clearing the Site

Clearing Heavy Jungle sq.m. 7.80

Clearing Light Jungle sq.m. 5.85

Clearing Scrub Jungle sq.m. 5.40

Uprooting & removing large palmyrah / coconut stumps Each 161.00

Uprooting & removing small palmyrah / coconut stumps Each 115.65

Removing weeds in channel and drain sq.m. 1.60

Cleaning Juliflora jungle with uprooting sq.m. 8.90

Cleaning Juliflora jungle without uprooting sq.m. 6.75

B. Dismantling

Dismantling, clearing away and carefully stacking materials

useful for re-use for any thickness of walls

Brick / stone in clay walls under 3m high cu.m. 68.65

Brick / stone in clay walls, add for every additional 3m or part

cu.m. 22.75
there of over the initial height of 3m

chipping of concrete and roughing the surface sq.m. 36.70

Mud / sun dried brick walls under 3m high cu.m. 46.00

Mud / sun dried brick walls, add for every additional 3m or part
cu.m. 13.00
there of over the initial height of 3m

Brick / stone masonry in lime mortar walls under 3m high cu.m. 210.00

Brick / stone masonry in lime mortar walls, add for every

cu.m. 23.20
additional 3m or part there of over the initial height of 3m

Brick / stone masonry in Cement mortar walls under 3m high cu.m. 257.40
Brick / stone masonry in Cement mortar walls, add for every
cu.m. 27.20
additional 3m or part there of over the initial height of 3m 284.60
Terracing work in roof or floor sq.m. 69.70

Flag stone in roof or floor including lifting sq.m. 36.75

Cut stone slab over culverts upto 3.3m height below G.L cu.m. 805.00

Cut stone slab over culverts over 3.3m height below G.L cu.m. 839.00

Removal of cut stone slabs & RCC cover slabs sq.m. 466.30

Refixing cut stone slab/RCC cover slab cu.m. 511.60

Pantile or Mangalore tiled roof without roof timbers sq.m. 18.05

Flat & pan tiles or Manglore tile over flat tiles, with out roof
sq.m. 25.30
timbers

AC sheet roofing without roof timbers sq.m. 16.05

Corrugated iron sheet roofing with pan tiles over, without roof
sq.m. 27.20
timbers

Old thatched roof, including tying materials into small bundles

sq.m. 7.80
for reuse.

Wrought & putup framed timbers in roofs / floors cu.m. 674.00

Doors & windows including removal of frames, hinges and

sq.m. 139.60
fastenings

Dry stones apron or revetment, stacking within 40m lead cu.m. 89.70

Grouted rough stones apron or revetment, stacking within 40m

cu.m. 104.70
lead

Dry stone masonry walls cu.m. 76.40

Dismantling lime concrete cu.m. 321.70

Dismantling plain Cement concrete cu.m. 442.00

Dismantling RCC cu.m. 3917.00

Dismantling RCC using depolying machineries cu.m. 3917.00

Pressed tiles & weathering course sq.m. 41.80

One course of pressed tile roof finish in Cement Mortar sq.m. 23.20

One course of terrace bricks roof finish in Cement mortar sq.m. 27.10

Two course of flat tiles roof finish in cement mortar sq.m. 27.10
Mosaic in situ finish in cement mortar in flooring and in wall
sq.m. 57.50
surface

Floor finish and dadooing walls in cement mortar with mosaic

sq.m. 55.70
tiles / glazed tiles / cuddapah slabs

C. Quarrying and Blasting

Hard rock measured in solid including blasting & stacking cu.m. 594.00

Removing hard rock by wedging, chiseling and trimming to

cu.m. 1190.00
proper shape where blasting is prohibited.

Medium rock and dense medium rock requiring blasting cu.m. 303.00

Extra for every additional 10m lead or part thereof over the
cu.m. 7.10
initial lead for blasted materials

Extra for every additional 1m lead or part thereof over the

cu.m. 7.30
initial lift of 2m for blasted materials

Benching, hard rock upto an average 10 cm depth sq.m. 575.00

Drilling holes in hard granite 40mm diameter RM 190.00

Drilling holes in hard granite 45mm diameter RM 223.00

Drilling holes in hard granite 50mm diameter RM 267.00

Drilling holes in hard granite 75mm diameter RM 304.00

Drilling holes in hard granite 32mm diameter RM 161.00

D. Earth Work

ORDINARY SOIL SS20A Earth work excavating and depositing

on bank with initial lead of 10m & initial lift of 2m in Sand, silt
or other loose soil, wet sand or silt not under water, light black cu.m. 61.50
cotton soil sandy loam and ordinary soil including ecxcavated
earth SS.20.A

ORDINARY SOIL SS20B Earth work excavating and depositing

on bank with initial lead of 10m & initial lift of 2m in Sand, silt
or other loose soil, wet sand or silt not under water, light black cu.m. 74.85
cotton soil, sandy loam and ordinary soil including excavated
earth SS.20.B

Sand & Silt Under Water SS20B Earth work excavating and
depositing on bank with a initial lead of 10 m & initial lift of 2m
cu.m. 93.60
in Slush and silt under water upto 0.75m depth requiring the
aid of basket and vessels SS.20.B
Trimming the bed and the side slope of the bank in all soils
except hard rock upto a thickness of 7.5 cm and making it cu.m. 14.30
ready to receive the concrete

Trimming the bed and the side slope of the bank in all soils
except hard rock upto a thickness of 7.5 cm to 15 cm and cu.m. 10.50
making it ready to receive the concrete

Sectioning during forming bunds when earth moving

cu.m. 10.50
machineries, lorries and rollers are used for consolidation.

HGS SS.20.A. Earth work excavating and depositing on bank

with initial lead of 10 m & initial lift of 2m in Hard stiff clay,
cu.m. 89.50
stiff black cotton, hard red earth, shales,murram, gravel,
stoney earth and earth mixed with small size boulders SS.20.A.

HGS SS.20.B. Earth work excavating and depositing on bank

with initial lead of 10 m & initial lift of 2m in Hard stiff clay,
cu.m. 112.05
stiff black cotton, hard red earth, shales,murram, gravel,
stoney earth and earth mixed with small size boulders SS.20B

SDR - (Not Requiring Blasting) Earth work excavating and

depositing on bank with initial lead of 10 m & initial lift of 2m
cu.m. 166.90
in Soft disintegrated rock, laterite, soft rock or kankar, not
requiring blasting.

LOOSE BOULDERS Earth work excavating and depositing on

bank with initial lead of 10 m & initial lift of 2m in loose cu.m. 265.10
boulders in excavation of various size 150mm to 625 mm

MR-&-DMR (Not Requiring Blasting) Earth work excavating and

depositing on bank with initial lead of 10 m & initial lift of 2m in cu.m. 293.15
medium rock and dense medium rock not requiring blasting

Extra for every additional 10 metre lead or part thereof over

cu.m. 13.55
the initial lead
Extra for every additional 1 metre lift or part thereof over the
cu.m. 10.55
initial lift

Breaking clods, consolidating and sectioning cu.m. 5.00

Breaking clods, consolidating and sectioning the earth scooped

cu.m. 15.50
by Bull Dozers.

Add to relevant T.N.D.S.S. No.20.A, rates for new tank bunds

and closing breaches for extra watering and consolidation,

By hand roller cu.m. 17.30

By power roller including hire charges cu.m. 29.30

Benching Old Embankment Slopes 45cm x 45cm cu.m. 3.20

Puddle wall work cu.m. 138.80

Turfing in slopes including watering and fixing with initial lead

cu.m. 29.30
upto 50m

Refilling with excavated sand complying with standard

cu.m. 34.20
specification for filling in foundation and basement.

Refilling with excavated soil (other than sand) complying with

cu.m. 38.95
standard specification for filling in foundation and basement.

E. OPEN WELL EXCAVATION

Earth work open well excavation complying with relevant

clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre
in sand, silt or other loose soil, Wet sand or silt not under cu.m. 74.85
water, light black cotton soil, sandy loam and ordinary soil -
First depth of 2 metre.

Earth work open well excavation complying with relevant

clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre
in Hard stiff clay, stiff black coton soil, hard red earth, shales, cu.m. 111.70
murram, gravel, stoney earth and earth mixed with small size
boulders and hard gravely soil - First depth of 2 metre
Earth work open well excavation complying with relevant
clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre
cu.m. 172.10
in soft disintegrated rock, laterite, soft rock or kankar not
requiring blasting - First depth of 2 metre

Open well excavation complying with relevant clauses of

T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium
cu.m. 277.10
rock and dense medium rock not requring blasting - First depth
of 2 metre

Open well excavation complying with relevant clauses of

T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium
cu.m. 414.60
rock and dense medium rock requiring blasting - First depth of
2 metre

Open well excavation complying with relevant clauses of

T.N.D.S.S. Well sinking and with lead upto 10 metre in Hard
cu.m. 812.30
granite measured in solid including blasting and stacking - First
depth of 2 metre

Sinking well in loose soils, light black cotton soil, sandy loam
and ordinary soil under water including bailing or pumping cu.m. 87.00
charges if necessary etc., complete First depth of 2 metres

Sinking well in Sand, including bailing or pumping charges if

cu.m. 122.10
necessary etc., complete - First depth of 2 metres

Sinking well in hard stiff clay, light black cotton soil, hard red
earth, shales, murram, gravel, stoney earth, and earth mixed
with small size boulders and hard gravelly soil including bailing cu.m. 122.10
or pumping charges if necessary etc., complete - First depth of
2 metres

F. RATE FOR EARTHWORK DEPLOYING MACHINERIES

Earth work in all soils except hard rock requiring blasting and
conveying for formation of bund with lead of 0 to 100 metre
deploying earth moving machineries and tippers including cu.m. 52.35
benching, formation of bunds, breaking clods, sectioning etc
complete
Earth work in all soils except hard rock requiring blasting and
conveying for formation of bund with an extra lead of every 100
metre or part thereof deploying earth moving machineries and cu.m. 4.10
tippers including benching, formation of bunds, breaking clods,
sectioning etc complete

Earth work deploying earth moving machineries for desilting

channel and forming bund on either side and depositing the
earth on banks including jungle clearance etc complete

having width up to 3m cu.m. 30.85

having width of 3m -10m cu.m. 37.85

Earth work excavation deploying earth moving machineries for

desilting channel having a width of more than 10m and
cu.m. 44.05
forming bund on either side and depositing the earth on banks
including jungle clearance etc complete

LIFT CHARGES - Concrete - Brick or Stone Masonry above

or below Ground Level

Concrete, above ground level

Add to the basic rates for works upto 4.50M height in ground
floor (height to be reckoned from floor level ie., plinth level in cu.m. 119.85
GL)

Add for works in every upper floor over the rate of preceeding
cu.m. 236.10
floor

Brick or Stone Masonry above GL

Add to the basic rates for works upto 4.50M height in ground
floor (height to be reckoned from floor level ie., plinth level in cu.m. 78.90
GL)

Add for works in every upper floor over the rate of preceeding
cu.m. 159.20
floor

STATEMENT II

Concrete, Below ground level

Add the basic rate for works above 1.50m depth and upto 4.5m
cu.m. 117.90
depth below ground level
Add the basic rate for works above 4.50m depth and upto 9m
cu.m. 236.70
depth below ground level

Add extra over the above item 2 for every additional 4.50m
cu.m. 236.70
depth beyond 9.0m depth below ground level

Brick or Stone Masonry below GL

Add the basic rate for works above 1.50m depth and upto
cu.m. 79.20
4.50m depth below GL

Add the basic rate for works above 4.50m depth and upto 9.0m
cu.m. 158.90
depth below GL

Add extra over the above item 2 for every additional 4.50m
cu.m. 158.90
depth beyond 9.0m depth below ground level

Concrete Vibrators

Where vibrators are specified for consolidation in PCC, this rate

per cu.m. over and above the provision made in the standard cu.m. 69.80
data book for consolidation with manual labour may be allowed.

Where vibrators are specified for consolidation in RCC, this rate

per cu.m. over and above the provision made in the standard cu.m. 94.20
data book for consolidation with manual labour may be allowed.

Dedection for consolidation cu.m. 6.30

G. Scaffolding, Centering, etc.,

Scaffolding Charges for Plastering for Repair Works only. 4m

sq.m.
to 6m above Ground Level

Scaffolding Charges for Plastering for Repair Works only. 6m

sq.m.
to10m above Ground Level

Scaffolding Charges for Plastering for Repair Works only over

sq.m.
10m above Ground Level

Scaffolding Charges for White or Colour Washing for Repair

sq.m.
Works only. 4m to 6m above Ground Level

Scaffolding Charges for White or Colour Washing for Repair

sq.m.
Works only. 6m to 10m above Ground Level

Scaffolding Charges for White or Colour Washing for Repair

sq.m.
Works only over 10m above Ground Level

Scaffolding Charges for Painting for Repair Works only. 4m to

sq.m.
6m above Ground Level
Scaffolding Charges for Painting for Repair Works only. 6m to
sq.m.
10m above Ground Level

Scaffolding Charges for Painting for Repair Works only over

sq.m.
10m above Ground Level

H. Plastering

Clean removal of lime plaster from walls and racking out joints
20 mm deep or from terraced roofs racking out joints 12 mm sq.m. 9.40
deep

Clean removal of lime plaster from walls sq.m. 7.25

Clean removal of Cement plaster from walls sq.m. 7.70

Clean removal of Cement plaster from walls and racking out

sq.m. 10.20
joints 20mm deep

I. White Washing, Colour Washing & Distempering

Thorough scrapping of old plastered surface sq.m. 4.20

Washing of plastered surface with soap, soda and water (or

sq.m. 5.25
with soda lime, brush and water)

J. Painting, Wood oiling, Tarring, Varnishing, Bee's

waxing Etc.,

Removing old paint from doors and windows by blow lamp and
sq.m. 34.45
scrapping, including removal and re-fitting of shutters.

Removing old paint from doors and windows by scrapping and

sq.m. 14.50
refitting of shutters.

Removing paint from doors,windows & wood works by manual

sq.m. 9.85
labour

Removing old paint from structural steel by blow lamp or sand

sq.m. 20.65
paper

Scrapping and removing old paint from structural steel by

sq.m. 9.10
manual labour

Removing old paint from iron surface with sand paper sq.m. 8.55
Repolishing the mosaic flooring including polishing stone and
hire charges for polishing machine but excluding cost of sq.m. 20.30
electrical charges

K. Miscellaneous

Supplying and filling up the empty cement gunny bags with

sand, stitching them, conveying the same to site and stacking
Bag 6.50
as directed within a lead of 10 m excluding cost of bags, Jute,
thread, needle,sand etc., (Labour only)

Driving piles up to 15 cm dia in river bed RM 20.30

Pointing the edge and driving bamboo / casurina / eucalyptus

Each 17.30
piles into river bed for the first 1m depth below ground level.

Pointing the edge and driving bamboo / casurina / eucalyptus

Each
piles into river bed for the first 1m depth below ground level.

Driving bamboo / casurina / eucalyptus piles into ground

beyond 1m depth from ground level. For every 1m (or) part RM 17.30
thereof

L. River Conservancy of Korambu Works

Brush wood bundles one metre girth and one metre long within one
an initial lead of 1.6 K.M. bundle

one
Extra for every additional lead of 1.6 KM (for the above item)
bundle

Driving casurina piles into bed including scaffolding etc.,

RM
complete

Casurina walling pieces 40 mm to 50 mm diameter including

RM
fixing with nails and tying with ropes

K. Cuting and Threading of G.I.Pipe

15 mm dia G.I. Pipe Cutting Each 9.35

15 mm dia G.I. Pipe Threading Each 13.35

20 mm dia G.I. Pipe Cutting Each 9.35

20 mm dia G.I. Pipe Threading Each 13.50

25 mm dia G.I. Pipe Cutting Each 11.20

25 mm dia G.I. Pipe Threading Each 28.05

32 mm dia G.I. Pipe Cutting Each 13.55

32 mm dia G.I. Pipe Threading Each 37.85

40 mm dia G.I. Pipe Cutting Each 18.30

40 mm dia G.I. Pipe Threading (48.40) Each 42.65

50 mm dia G.I. Pipe Cutting Each 23.50

50 mm dia G.I. Pipe Threading (13.50) Each 47.35

65 mm dia G.I. Pipe Cutting Each 25.50

65 mm dia G.I. Pipe Threading Each 57.25

80 mm dia G.I. Pipe Cutting Each 33.20

80 mm dia G.I. Pipe Threading Each 72.15

100 mm dia G.I. Pipe Cutting Each 47.35

100 mm dia G.I. Pipe Threading Each 95.55

L. Labour Wrought and Put-up for Doors, Windows &

Ventilators

Labour wrought and put up in position of frames inclusive of

cu.m. 13690.00
fixing holdfasts for doors, windows, ventilators etc.,

Labour wrought and put up in position Shutters for fully

panelled doors (external or internal) moulded panels including
sq.m. 1537.00
labour charges for fixing furniture fittings complying with
standard drawings and standard specification.

Labour wrought and put up in position Shutters for fully

panelled doors internal five plywood panels including labour
sq.m. 1281.00
charges for fixing furniture fittings complying with standard
drawings and standard specification.

Labour wrought and put up in position Shutters for glazed and

panelled doors including labour charges for fixing furniture
sq.m. 1436.00
fittings complying with standard drawings and standard
specification.

Labour wrought and put up in position Shutters for Framed and

planked doors including labour charges for fixing furniture
sq.m. 1200.00
fittings complying with standard drawings and standard
specification.

Labour wrought and put up in position Shutters for ledged and

braced and planked doors including labour charges for fixing
sq.m. 810.00
furniture fittings complying with standard drawings and
standard specification.
Labour wrought and put up in position Shutters for Glazed
windows including labour charges for fixing furniture fittings sq.m. 1436.00
complying with standard drawings and standard specification.

Labour wrought and put up in position Shutters for Windows

panelled including labour charges for fixing furniture fittings sq.m. 1547.00
complying with standard drawings and standard specification.

Labour wrought and put up in position Shutters for windows

ledged and braced and planked doors including labour charges
sq.m. 810.00
for fixing furniture fittings complying with standard drawings
and standard specification.

Labour wrought and put up in position Frames, shutters for

Ventilators glazed fixed double frames and with wire netting
sq.m. 1281.00
complete fixed in position in accordance with standard drawings
and standard specification.

Labour wrought and put up in position Frames, Shutters for

Swing Ventilators and fixed in position in accordance with sq.m. 1197.00
standard drawings and standard specification.

Labour charges for fixing doors alongwith frames in position

sq.m. 228.50
etc., complete (finished work)

Labour charges for fixing windows and ventilators along with

sq.m. 286.60
frames in position etc., complete.

Labour wrought and put up in position Flush shutters

Single leaf shutter sq.m. 214.10

Double leave shutters sq.m. 330.20

Labour wrought and put up in position fly proof wire gauge

sq.m. 825.00
shutters for doors, windows and ventilators.

Labour wrought and put up for Providing teak wood weldmesh

sq.m. 1072.00
screen with frames 3"x3" (0.075m x 0.075m)

M.Breaking Metals

Labour charges for breaking 40mm metal from departmental

cu.m. 406.10
blasted stones
Labour charges for breaking 20mm metal from departmental
cu.m. 607.60
blasted stones

Labour charges for breaking 50mm metal from departmental

cu.m. 243.70
blasted stones

N.Cement Mortar

Grinding Mortar (Special Grinding lime) cu.m. 368.20

Grinding Mortar (Ordinary grinding lime) cu.m. 280.60

Mixing Mortar - Cement by manual cu.m. 116.00

Mixing Mortar - Cement by Machine Mixing cu.m. 152.90

O.Metal and Iron works

Petty ironwork for truss, straps etc., (Wrought & fixed) labour
Kg 55.35
only

Iron works for trusess & record racks (labour only) Kg 51.15

Supplying & fixing mild steel grills for windows, ventilators,

Kg 32.00
etc.,

Fixing M.S.Rods round / square for windows Kg 29.65

Fixing Iron bars in windows and ventilators Kg 29.65

Labour charges for fixing aluminium doors, windows and
ventilators m2 732.00
1 HP Jet Pump Motor Each 9012.00

1.50 HP Jet Pump Motor Each 15450.00

2 HP Jet Pump Motor Each 13920.00
3 HP Jet Pump Motor Each 25755.00
1 HP mono block Each 8160.00

2 HP mono block Each 12240.00

5 HP mono block Each 35700.00

2 HP Submerciable Pump Motor Each 15450.00
3 HP Submerciable Pump Motor Each 35490.00
5 HP Submerciable Pump Motor Each 52520.00
7.50 HP Submerciable Pump Motor Each 84130.00
10.00 HP Submerciable Pump Motor Each 102000.00

3 Phase panell board incliding labour charges Each 13390.00

61.80
Nylon rope for bore well Rm
14.3
22.45
 NAME OF WORK
SPECIAL REPAIRS TO LEAKY ROOF,PROVIDING SHED AND PAINTING WORK IN HEALTH SUB CENTRE BUILDING
AT DURAIRAJAPURAM IN THENI DISTRICT
LEAD STATEMENT

Loading &
Unloading
Distance

Charges
(Kms)

Lead
Source of
Sl No Material Unit Cost IC Total
Supply

1 Cement Local 1 MT 6040.00 -- 7.28 -- 6047.28

2 Steel Local 1 MT 58000.00 -- 7.28 -- 58007.28
4 M-Sand for mortor Kodangipatti 9 M3 1338.00 -- 104.85 -- 1442.85
5 M-Sand for filling Kodangipatti 9 M3 1338.00 -- 104.85 -- 1442.85
6 P-Sand for Plastering Kodangipatti 9 M3 1343.00 -- 104.85 -- 1447.85
7 Quarry Rubbish Karuthamalai 17 M3 96.65 -- 186.22 -- 282.87
8 HGB 40mm ISS metal Karuthamalai 17 M3 1069.80 -- 186.22 -- 1256.02
9 HGB 20mm ISS metal Karuthamalai 17 M3 1489.00 -- 186.22 -- 1675.22
10 HGB 10-12mm ISS metal Karuthamalai 17 M3 1199.00 -- 186.22 -- 1385.22
11 Country bricks of size 8 /4" x 4 /4" x 2 /4"
3 1 3
Kunnur 13 1000 N os
5709.00 -- 123.43 -- 5832.43
12 Brick jelly 40mm Kunnur 13 M3 705.00 -- 100.42 -- 805.42
13 Brick jelly 20mm Kunnur 13 M3 786.00 -- 100.42 -- 886.42
14 Slacked Lime Theni 12 M3 993.00 -- 93.58 -- 1086.58
15 Shell Lime Theni 12 M3 1348.00 -- -- -- 1348.00
16 Pressed tiles 23 x 23 x 2cm Theni 12 1000 Nos 16106.00 -- 76.72 -- 16182.72
17 Stone dust Karuthamalai 17 M3 123.70 -- 127.78 -- 251.48
Certificate shall be issued to the effect that the lead particulars furnished above are correct to the best of his knowledge and belief
and the rates adopted are based on the current Schedule of Rates for the year 2023-2024.
 NAME OF WORK
SPECIAL REPAIRS TO LEAKY ROOF,DAMAGED FLOORING AND INNER &
OUTER PAINTING WORK IN HEALTH SUB CENTRE BUILDING AT
DURAIRAJAPURAM IN THENI DISTRICT
DETAILED ESTIMATE
Measurements
Sl No Description of works Nos Total Contents
L B D
1 Dismantling and Clearing away and carefully stacking materials useful for
reuse of Pressed tiles & Weathering course concrete etc., complete.
HSC & Quarters roof 1 x 1 11.18 5.84 -- 65.29
65.29 m2

2 Dismantling Floor finish and dadooing walls in cement mortar with mosaic
tiles / glazed tiles / cuddapah slabs
HSC
Visiting room 1 x 1 2.80 2.60 -- 7.28
VHN Room 1 x 1 2.80 2.60 -- 7.28
Store room 1 x 1 2.80 2.65 -- 7.42
Medicine room 1 x 1 2.80 2.55 -- 7.14
Toilet passage 1 x 1 1.45 0.90 -- 1.31
WC 1 x 1 1.20 0.90 -- 1.08
Quarters
Visiting room 1 x 1 2.85 2.60 -- 7.41
Toilet passage 1 x 1 1.60 0.90 -- 1.44
Toilet 1 x 1 1.80 1.60 -- 2.88
Kitchen 1 x 1 2.80 1.60 -- 4.48
Bed 1 x 1 3.40 2.80 -- 9.52
Dadooing
Toilet passage alrd 1 x 1 4.70 1.50 7.05
WC 1 x 1 4.20 1.50 6.30
Quarters
Toilet passage 1 x 1 5.00 1.50 7.50
Toilet 1 x 1 6.80 1.50 10.20
d/f D -1 x 5 0.75 1.50 -5.63
82.66 m2

3 Dismantling and clearing away and carefully stacking materials useful for
reuse of Reinforced Cement Concrete etc., complete.
window sunshade 1 x 3 1.36 0.60 0.07 0.16
0.16 m3

4 Dismantling and clearing away and carefully stacking materials useful for
reuse of Brick / stone masonry in lime mortar walls under 3m high etc.,
complete.
Compound wall rear side 1 x 2 6.00 0.23 1.50 4.14
4.14 m3

Page 1
 Measurements
Sl No Description of works Nos Total Contents
L B D

5 Clean removal of Cement plaster from wall surface etc., complete.

Compound wall 1 x 2 5.00 -- 1.20 12.00

12.00 m2

6 Brick work in following Cement Mortar using best quality of country bricks of size 8-3/4" x 4-
1/4" x 2-1/4" for foundation and basement including curing, etc., complete complying with
standard specifiction. In Cement mortar 1:5
Compound wall 1 x 2 6.00 0.23 1.50 4.14
Sundries. 0.06
4.20 m3

7 Supplying and erecting steel shuttering including necessary supports for plane surfaces for
Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams,
grade beams, staircase steps, etc. complete
Compound wall plinth beam
1 x 2 6.00 0.15 1.80
sides
Septic tank bottom 1 x 1 2.40 1.40 3.36
Septic tank side 1 x 1 9.44 0.15 1.42
D/f Manhole cover -1 x 1 0.60 0.60 -0.36
manhole sides 1 x 1 2.40 0.15 0.36
Sundries. 0.02
6.60 m2

8 Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS
456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works
with minimum cement content of 325 kg/m 3 etc, complete.

a in Ground Floor
Compound wall plinth beam 1 x 1 6.00 0.23 0.15 0.21
Septic tank 1 x 1 2.86 1.86 0.15 0.80
D/f Manhole cover -1 x 1 0.60 0.60 0.15 -0.05
Sundries 0.05
1.00 m3

9 Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC
works as per design given including cost of steel and G.I. binding wire in all floors etc.
complete
As per RCC Qty 1.00 100.00 Kg/m3 100.09
100.09 Kg
1.00
Sundries 0.10
1.10 Qtl

Page 2
 Measurements
Sl No Description of works Nos Total Contents
L B D
10 Finishing the top of roof with one course of New Machine pressed tiles of
size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3
and water proofing compound including curing etc., complete
Dismandling Quantity at 80 % 65.29 0.80 52.23
Add sundries 0.27
52.50 m2

11 Finishing the top of roof with one course of Old Machine pressed tiles of size
230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3
cement mortar mixed with red oxide and water proofing compound
including curing etc., complete.
Dismantling Quantity at 20 % 65.29 0.20 13.06
Add sundries 0.14
13.20 m2

12 Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel
tubular box section of 100x50x3mm of 1meter interval including priming coat
fixing in position with all necessary accessories complete complying with
standard specification and as directed by the departmental officers.
Window sunshade 1 x 3 1.40 0.80 3.36
Sundries 0.04
3.40 m2

13 Supplying and fixing in position best approved of BIS quality PVC rain water
down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry
PVC shoe, PVC bend, cast iron gratings of required diameter and special
clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of
110mm dia PVC Pipe
Roof 1 x 3 4.00 12.00
12.00 Rm

14 Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 12mm
thick mixed with water proofing compound conforming to BIS at 2% by
weight of cement used including finsihing, curing, etc., complete in all floors
complying with standard specification and as directed by the departmental
officers.
Compound wall 1 x 2 6.00 -- 1.50 18.00
Compound wall top 1 x 1 6.00 0.23 1.38
Compound wall 1 x 2 5.00 -- 1.00 10.00
Compound wall top 1 x 1 5.00 0.23 1.15
Add sundries 0.47
31.00 m2

15 Supplying and fixing in position CI manhole covers with CI frames (Heavy

duty) of size 60cm x 60cm of best approved quality as per standard
specification etc., complete compying with standard specifications

Page 3
 Measurements
Sl No Description of works Nos Total Contents
L B D
Septic tank 1 x 1 1.00
Total 1.00 No

16 Paving the floor with best quality vetrified (Morbonite) Tiles of size 600 x
600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3
(one cement and three sand) 20mm thick in all floors and the top pointed
HSC
with the white cement mixed same colour pigments etc., complete complying
Visiting room 1 x 1 2.80 2.60 -- 7.28
VHN Room 1 x 1 2.80 2.60 -- 7.28
Store room 1 x 1 2.80 2.65 -- 7.42
Medicine room 1 x 1 2.80 2.55 -- 7.14
Quarters
Visiting room 1 x 1 2.85 2.60 -- 7.41
Kitchen 1 x 1 2.80 1.60 -- 4.48
Bed 1 x 1 3.40 2.80 -- 9.52
Add Sundries 0.47
51.00 m2
17 Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20
mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand)
base mortar over the existing slab / floor including cutting the tiles to the
required
HSC size with special cutter wherever necessary, laying in position and
Toilet passage 1 x 1 1.45 0.90 -- 1.31
WC 1 x 1 1.20 0.90 -- 1.08
Quarters
Toilet passage 1 x 1 1.60 0.90 -- 1.44
Toilet 1 x 1 1.80 1.60 -- 2.88
Add Sundries 0.29
7.00 m2
18 Dadooing walls with colour designed digital printed ceramic tiles of size
300mm x 450mm x 8mm and above in best approved quality tiles set in
Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing
the
HSCjoints with white cement mixed with colouring pigments at the rate of
Toilet passage alrd 1 x 1 4.70 2.10 9.87
WC 1 x 1 4.20 2.10 8.82
Quarters
Toilet passage 1 x 1 5.00 2.10 10.50
Toilet 1 x 1 6.80 2.10 14.28
d/f D -1 x 5 0.75 2.10 -7.88
Add Sundries 0.40
36.00 m2
19 White washing two coats with freshly burnt white shell lime in all floors
including cost of lime, blue powder fevicol type gum, brushes, scaffolding
charges, etc., complete
HSC
Visiting room 1 x 1 2.80 2.60 -- 7.28
VHN Room 1 x 1 2.80 2.60 -- 7.28

Page 4
 Measurements
Sl No Description of works Nos Total Contents
L B D
Store room 1 x 1 2.80 2.65 -- 7.42
Medicine room 1 x 1 2.80 2.55 -- 7.14
Toilet passage 1 x 1 1.45 0.90 -- 1.31
WC 1 x 1 1.20 0.90 -- 1.08
Quarters
Visiting room 1 x 1 2.85 2.60 -- 7.41
Toilet passage 1 x 1 1.60 0.90 -- 1.44
Toilet 1 x 1 1.80 1.60 -- 2.88
Kitchen 1 x 1 2.80 1.60 -- 4.48
Bed 1 x 1 3.40 2.80 -- 9.52
Compound wall 1 x 2 6.00 -- 1.50 18.00
Compound wall top 1 x 1 6.00 0.23 1.38
Compound wall 1 x 2 5.00 -- 1.00 10.00
Compound wall top 1 x 1 5.00 0.23 1.15
Add Sundries 2.23
89.99 m2

20 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of
first class quality and of approved colour over a priming coat including thorough scrapping,
clean removal of dirt, and including necessary plaster of paris putty, wherever required etc.,
complete complying with standard specification.
HSC Visiting room 1 x 1 10.80 -- 3.00 32.40
D/F Door -1 x 2 1.00 -- 2.10 -4.20
D/F Main door -1 x 1 1.40 -- 2.10 -2.94
Door soffits 1 x 2 5.20 0.18 1.87
Window soffits 1 x 1 5.60 0.18 1.01
VHN room 1 x 1 10.80 -- 3.00 32.40
D/F Opening -1 x 1 1.00 -- 2.10 -2.10
D/F window -1 x 2 0.90 -- 1.20 -2.16
Window soffits 1 x 2 4.40 0.10 0.88
Opening soffits 1 x 1 5.20 0.18 0.94
Medicine Room 1 x 1 10.70 -- 3.00 32.10
D/F Door -1 x 1 0.80 -- 2.10 -1.68
D/F Window -1 x 1 0.90 -- 1.30 -1.17
Window soffits 1 x 1 4.40 0.10 0.44
WC passage 1 x 1 4.70 -- 3.00 14.10
D/F Door -1 x 1 0.80 -- 2.10 -1.68
D/F Ventilator -1 x 1 0.90 -- 0.60 -0.54
WC 1 x 1 4.20 -- 3.00 12.60
D/F Door -1 x 1 0.80 -- 2.10 -1.68
D/F Ventilator -1 x 1 0.90 -- 0.60 -0.54
Ventilator soffits 1 x 2 3.00 0.10 0.60
Door soffits 1 x 2 5.00 0.18 1.80
Store Room 1 x 1 10.90 -- 3.00 32.70
D/F Door -1 x 1 1.00 -- 2.10 -2.10
Page 5
 Measurements
Sl No Description of works Nos Total Contents
L B D
D/F Window -1 x 1 1.20 -- 1.30 -1.56
Window soffits 1 x 1 5.00 0.18 0.90
Quarters
Visiting room 1 x 1 10.90 -- 3.00 32.70
D/F Door -1 x 2 1.00 -- 2.10 -4.20
D/F window -1 x 2 0.90 -- 1.30 -2.34
Door soffits 1 x 2 5.20 0.18 1.87
Window soffits 1 x 2 4.40 0.10 0.88
Kitchen passage 1 x 1 5.00 -- 3.00 15.00
D/F Door -1 x 2 0.90 -- 2.10 -3.78
Door soffits 1 x 2 1.00 0.18 0.36
D/F Door -1 x 1 1.00 -- 2.10 -2.10
Door soffits 1 x 2 5.20 0.18 1.87
Kitchen 1 x 1 8.80 -- 3.00 26.40
D/F Door -1 x 1 0.90 -- 2.10 -1.89
D/F window -1 x 2 0.90 -- 0.90 -1.62
Bed room 1 x 1 12.40 -- 3.00 37.20
D/F Door -1 x 1 0.90 -- 2.10 -1.89
D/F window -1 x 1 1.20 -- 1.30 -1.56
Door soffits 1 x 1 5.10 0.18 0.92
Window soffits 1 x 1 5.20 0.10 0.52
Sundries 0.27
241.00 m2

21 Painting two coats of newly plastered wall surface with ready mixed Plastic
Exterior Emulsion Paint of first class quality and of approved colour over a
priming coat etc., complete.

Entrance (South side) 1 x 1 11.64 -- 3.60 41.90

D/F Door -1 x 1 1.40 -- 2.10 -2.94
D/F Window -1 x 2 0.90 -- 1.30 -2.34
D/F Window -1 x 1 1.20 -- 1.30 -1.56
D/F Door -1 x 1 1.00 -- 2.10 -2.10
Window soffits 1 x 2 5.20 0.10 1.04
Window soffits 1 x 1 5.00 0.10 0.50
Projection 5 x 2 0.50 -- 3.60 18.00
Sunshade Top & bottom 2 x 1 1.66 0.60 1.99
Sunshade side 1 x 2 0.60 -- 0.08 0.10
Sunshade Top & bottom 1 x 2 1.36 0.60 1.63
Sunshade side 1 x 2 0.60 -- 0.08 0.10
Rear side (North side) 1 x 1 11.64 -- 3.60 41.90
D/F Window -1 x 1 0.90 -- 1.30 -1.17
D/F Window -1 x 1 1.20 -- 1.30 -1.56
D/F Window -1 x 1 0.90 -- 0.90 -0.81

Page 6
 Measurements
Sl No Description of works Nos Total Contents
L B D
D/F Ventilator -1 x 1 0.90 0.60 -0.54
Window soffits 1 x 1 0.90 0.10 0.09
Window soffits 1 x 1 4.40 0.10 0.44
Window soffits 1 x 1 5.00 0.10 0.50
Ventilator soffits 1 x 1 3.60 0.10 0.36
Side wall (East & west side) 1 x 2 6.30 -- 3.60 45.36
D/F Window -2 x 1 0.90 -- 1.30 -2.34
D/F Window -1 x 1 0.90 -- 0.90 -0.81
D/F Ventilator -1 x 1 0.90 0.60 -0.54
Window soffits 1 x 1 4.40 0.10 0.44
Window soffits 1 x 1 3.60 0.10 0.36
Ventilator soffits 1 x 1 3.00 0.10 0.30
Sunshade Top & bottom 1 x 4 1.36 0.60 3.26
Sunshade side 4 x 2 0.60 -- 0.08 0.38
Sunshade Top & bottom 1 x 1 1.66 0.60 1.00
Sunshade side 1 x 2 0.60 -- 0.08 0.10
Parapet Inner 1 x 1 14.04 0.35 4.91
Parapet Top 1 x 1 14.50 0.25 3.63
Compound wall
Entrance (South side) 1 x 2 14.35 1.50 43.05
D/F Gate -1 x 1 1.50 -- 1.50 -2.25
D/F Gate -1 x 1 1.20 -- 1.50 -1.80
Entrance Top 1 x 1 14.35 0.25 3.59
Rear side (North side) 1 x 2 14.35 1.50 43.05
Rear side Top 1 x 1 14.35 0.25 3.59
Side wall (East & west side) 2 x 2 12.80 1.50 76.80
Side Top 1 x 2 12.80 0.25 6.40
Add sundries 0.99
325.00 m2

22 Painting Old wood work with one coats of synthetic enamel ready mixed
paint of approved quality and colour over one coat priming coat in all floors
including the cost of primer etc. complete complying with standard
specification.
Co.eff
Door 1 x 1 1.00 2.20 2.10 4.62
Window 1 x 5 0.90 2.20 1.30 12.87
Door 1 x 2 1.20 2.20 2.10 11.09
Window 1 x 2 0.90 2.20 1.30 5.15
0.07
33.80 m2

Page 7
 Measurements
Sl No Description of works Nos Total Contents
L B D
23 Painting old iron works such as steel doors, windows, ventilators, window
bars, balustrades etc., with two coats of best approved first quality and
colour of synthetic enamel paint over the existing red oxide priming coat in
all floors excluding cost of priming coat etc., complete
Co.eff
Door 1 x 1 0.90 2.20 2.10 4.16
Window 1 x 1 1.50 2.20 1.70 5.61
Door 1 x 1 1.20 2.20 1.70 4.49
Window 1 x 1 1.40 2.20 2.10 6.47
Add sundries 0.08
20.80 m2

24 Provision for Labour Welfare fund at 1% Ls

25 Provision for Unforeseen item of work Ls

Page 8
 NAME OF WORK
SPECIAL REPAIRS TO LEAKY ROOF,PROVIDING SHED AND PAINTING
WORK IN HEALTH SUB CENTRE BUILDING AT DURAIRAJAPURAM IN
THENI DISTRICT
DATA SHEET
Sl No Qty. Unit Description Rate Per Amount
SUB DATA
a] Cement Mortar 1:2
720.00 KG Cement 6047.28 MT 4354.04
1.00 m3 M-Sand for Mortar 1442.85 m3 1442.85
1.00 m3 Mixing charges 116.00 m3 116.00
5912.89
Rate for m3 Rs. 5912.89

b] Cement Mortar 1:3

480.00 KG Cement 6047.28 MT 2902.69
1.00 m3 M-Sand for Mortar 1442.85 m3 1442.85
1.00 m3 Mixing charges 116.00 m3 116.00
4461.54
Rate for m3 Rs. 4461.54

c] Cement Mortar 1:3 - P Sand

480 Kg Cement 6047.28 MT 2902.69
1.00 m3 P-Sand for Mortor 1447.85 m3 1447.85
1.00 m3 Mixing Charges 116.00 m3 116.00
4466.54
Rate for m3 Rs. 4466.54

d] Cement Mortar 1:4

360.00 KG Cement 6047.28 MT 2177.02
1.00 m3 M-Sand for Mortar 1442.85 m3 1442.85
1.00 m3 Mixing charges 116.00 m3 116.00
3735.87
Rate for m3 Rs. 3735.87

e] Cement Mortar 1:5

288.00 KG Cement 6047.28 MT 1741.62
1.00 m3 M-Sand for Mortar 1442.85 m3 1442.85
1.00 m3 Mixing charges 116.00 m3 116.00
3300.47
Rate for m3 Rs. 3300.47

f] Cement Mortar 1:5 - P Sand

288 Kg Cement 6047.28 MT 1741.62
1.00 m3 P-Sand for Mortor 1447.85 m3 1447.85
1.00 m3 Mixing Charges 116.00 m3 116.00
3305.47
Rate for m3 Rs. 3305.47
g] Cement Mortar 1:6
240.00 KG Cement 6047.28 MT 1451.35
1.00 m3 M-Sand for Mortar 1442.85 m3 1442.85
1.00 m3 Mixing charges 116.00 m3 116.00
3010.20
Rate for m3 Rs. 3010.20

h] Lime Mortar 1:2

0.50 m3 Lime Stone 1086.58 m3 543.29
1.00 m3 M-Sand for Mortar 1442.85 m3 1442.85
1.00 m3 Grinding Mortar 280.60 m3 280.60
2266.74
Rate for m3 Rs. 2266.74

i] Lime Mortar 1:2 using Shell Lime for Vertical Joint

0.50 m3 Shell Lime 1348.00 m3 674.00
1.00 m3 M-Sand for Mortar 1442.85 m3 1442.85
1.00 m3 Grinding Mortar 280.60 m3 280.60
2397.45
Rate for m2 Rs. 2397.45

Brick Jelly Lime Concrete 1:2:5 using 40mm brick jelly in

j] Lime Mortar 1:2 - 10 cu.m.
9.50 m3 Broken Brick Jelly (40mm size ) 805.42 m3 7651.49
3.80 m3 Lime Mortar 1:2 2266.74 m3 8613.61
1.80 Nos. Mason II Class 932.00 Each 1677.60
17.70 Nos. Mazdoor I Class 651.00 Each 11522.70
14.10 Nos. Mazdoor II Class 534.00 Each 7529.40
Total for 10 cu.m. 36995.00
3699.50
Rate for m2 Rs. 3699.50

k] Labour wrought and put up

4.50 Nos. Carpenter I Class 976.00 Each 4392.00
13.20 Nos. Carpenter II Class 932.00 Each 12302.40
8.80 Nos. Mazdoor I Class 651.00 Each 5728.80
Sundries for nails, screws, etc. 224.23
22647.43
Rate for m2 Rs. 22647.40

l] Priming coat for new iron work

1.33 lit. Red oxide primer 136.90 lit. 182.08
0.70 Nos. Painter I Class 797.00 Nos. 557.90
Sundries for brushes etc., LS 9.10
749.08
Rate for m2 Rs. 74.91

MAIN DATA
1 Dismantling and Clearing away and carefully stacking
materials useful for reuse of Pressed tiles & Weathering
course concrete etc., complete.

1.00 m2 As per Schedule of rates 41.80 m2 41.80

41.80
Rate for 1 m3 Rs. 41.80

2 Dismantling and clearing away and carefully stacking

materials useful for reuse of Reinforced Cement Concrete
etc., complete.

1.00 m3 As per Schedule of rates 3917.00 m3 3917.00

3917.00
Rate for 1 m3 Rs. 3917.00

3 Dismantling and clearing away and carefully stacking

materials useful for reuse of Brick / stone masonry in lime
mortar walls under 3m high etc., complete.

1.00 m2 As per Schedule of rates 257.40 m2 257.40

257.40
Rate for 1 m2 Rs. 257.40

4 Clean removal of Cement plaster from wall surface etc.,

complete.
1.00 m2 As per Schedule of rates 7.70 m2 7.70
7.70
Rate for 1 m2 Rs. 7.70

5 Brick work in following Cement Mortar using best quality of

country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and
basement including curing, etc., complete complying with
standard specifiction.
In Cement Mortar 1:5
1300 Nos. Country bricks of size 8.75" x 4.25" x 5832.43 1000 Nos.
7582.16
2.75"
0.708 cu.m. Cement mortar 1:5 3300.47 cu.m. 2336.73
1.00 Nos. Mason I Class 999.00 Each 999.00
2.00 Nos. Mason II Class 932.00 Each 1864.00
2.00 Nos. Mazdoor I Class 651.00 Each 1302.00
4.00 Nos. Mazdoor II Class 534.00 Each 2136.00
Total for 100 cft (or) 2.83168 cu.m. 16219.89
Rate for 1 cu.m. 5728.01
Rate for 1 cu.m.:
a For foundation & basement 5728.01 5728.01
b In Ground floor 5728.01 78.90 5806.91

6 Supplying and erecting steel centering including necessary

supports for plane surfaces for Reinforced Cement Concrete
works such as column footings, column pedestals, plinth beams,
grade beams, staircase steps, etc. which require only nominal
Sub-Data for strutting
 98.50 RM Casurina props 10 to 13 cm dia. 25.20 RM 2482.20
Assuming 5 uses, Rate for 1 use 496.44
0.30 Nos. Carpenter I Class 976.00 Each 292.80
0.30 Nos. Mazdoor I Class 651.00 Each 195.30
LS Add for wedges and nails 14.89
Total for 10 sq.m. 999.43
Rate for 1 sq.m. 99.94
Main data
10.00 sq.m. Rate for centering for slab as per (a) 957.96 sq.m. 9579.65
10.00 sq.m. Deduct or strutting 99.94 sq.m. -999.43
Total for 10 sq.m. 8580.21
Rate for 1 sq.m. 858.02

7 Providing and laying in position, standardised concrete Mix M-20 Grade in accordance
using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all
RCC items of works with minimum cement content of 325 kg/ms and maximum
water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in
5.00 Cum 20mm Machine HBG Stone Jelly 1675.22 Cum 8376.10
3.30 Cum 10-12mm Machine HBG Stone Jelly 1385.22 Cum 4571.23
4.79 Cum M-Sand 1442.85 Cum 6911.25
3250 kG cement 6047.28 MT 19653.66
Plasticiser / Super plasticiser @ 0.6% 43.20 Kg
19.50 kG 842.40
of cement
3.50 nos Mason II Class 932.00 each 3262.00
21.20 nos Mazdoor I Class 651.00 each 13801.20
35.30 nos Mazdoor II Class 534.00 each 18850.20
Total for 10 cu.m. 76268.04
For 1 cu.m. 7626.80
Add for vibration charge (as per SOR) 94.20
Sub-Total 7721.00
Rate for 1 cu.m. 7721.00
Rate for 1 cu.m.
Foundation and Basement 7721.00
For Ground Floor 7721.00 119.85 7840.85

8 Supplying, fabricating and placing in position Mild Steel /

Ribbed Tor Steel grills for all RCC works as per design given
including cost of steel and G.I. binding wire in all floors etc.
complete complying with standard specification. (Contractor has
MS (or) RTS rods
1.00 Qtl Cost of steel 58007.28 MT 5800.73
0.01 Qtl Binding wire 56.35 Kg 56.35
3.50 Nos. Fitter I Class 866.00 Each 3031.00
Rate for 1 Quintal 8888.08

9 Finishing the top of roof with one course of New Machine

pressed tiles of size 230mm x 230mm x 20mm of approved
quality set in Cement Mortar 1:3 and water proofing
compound including curing etc., complete.

Sub-Data for Pointing with Cement Mortar 1:3

0.04 cu.m. Cement Mortar 1:3 4461.54 cu.m. 178.46
0.38 Kg Water Proofing Compound 42.70 Kg 16.40
2.20 Nos. Mason II Class 932.00 Each 2050.40
 0.50 Nos. Mazdoor I Class 651.00 Each 325.50
1.10 Nos. Mazdoor II Class 534.00 Each 587.40
LS Add for red oxide etc., 8.92
Total for 10 sq.m. 3167.08
Rate for 1 sq.m. 316.71

Main Data
189.00 No Pressed Tiles of 23x23x2cm 16182.72 1000 3058.53
0.12 m3 Cement Mortar 1:3 4461.54 m3 535.39
10.00 m2 Pointing with Cement Mortar 1:3 316.71 m2 3167.08
1.15 Kg Water Proofing Compound 42.70 Kg 49.19
1.10 No Mason I Class 999.00 No 1098.90
2.10 No Mason II Class 932.00 No 1957.20
2.20 No Mazdoor I Class 651.00 No 1432.20
1.10 No Mazdoor II Class 534.00 No 587.40
Total for 10 sq.m. 11885.89
Rate for 1 m2 Rs. 1188.60

10 Finishing the top of roof with one course of Old Machine

pressed tiles of size 230mm x 230mm x 20mm of approved
quality set in Cement Mortar 1:3 cement mortar mixed with
red oxide and water proofing compound including curing
etc., complete.
Sub-Data for Pointing with Cement Mortar 1:3
0.04 cu.m. Cement Mortar 1:3 4461.54 cu.m. 178.46
0.38 Kg Water Proofing Compound 42.70 Kg 16.40
2.20 No Mason II Class 932.00 No 2050.40
0.50 No Mazdoor I Class 651.00 No 325.50
1.10 No Mazdoor II Class 534.00 No 587.40
LS Add for red oxide etc., 8.92
Total for 10 sq.m. 3167.08
Rate for 1 sq.m. 316.71

Main Data
0.12 cu.m. Cement Mortar 1:3 4461.54 cu.m. 535.39
10.00 sq.m. Pointing with Cement Mortar 1:3 316.71 sq.m. 3167.08
1.15 Kg Water Proofing Compound 42.70 Kg 49.19
1.10 Nos. Mason I Class 999.00 Each 1098.90
2.10 Nos. Mason II Class 932.00 Each 1957.20
2.20 Nos. Mazdoor I Class 651.00 Each 1432.20
1.10 Nos. Mazdoor II Class 534.00 Each 587.40
Total for 10 sq.m. 8827.36
Rate for 1 m2 Rs. 882.70
11 Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box
section of 100x50x3mm of 1meter interval including priming coat fixing in position with
all necessary accessories complete complying with standard specification and as directed
by the departmental officers.
11.00 sq.m Colour galvanume sheet roof of 434.00 sq.m 4774.00
2.20 nos 0.47mm thick(quotation)
Fitter II class 856.00 Each 1883.20
1.10 nos Carpener I class 976.00 Each 1073.60
3.20 nos Mazdoor I class 651.00 Each 2083.20
13.84 Rm steel tubular box section of 500.00 Rm 6920.00
LS 100x50x3mm(Quotation)
U or J bolt with Bitumen washer LS 50.00
LS Conveyance charges LS 19.00
LS Priming coat charges LS 10.80
Rate for 10 sq.m 16813.80
Rate for 1 sq.m 1681.40

12 Supplying and fixing in position best approved of BIS quality PVC rain water down fall
pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend,
cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and
a fixing of cast iron110mm
gratings at PVC
dia junction
Pipeof parapet and the RCC roof slab including finishing
3.00 RM Cost of PVC Pipe 203.10 RM 609.30
1.00 No. PVC Shoe 110mm dia 83.40 Each 83.40
1.00 No. PVC Bend 110mm dia 104.10 Each 104.10
2.00 Nos. Cost of brackets for PVC pipes 20.05 Each 40.10
4.00 Nos. Cost of teak wood plugs 1.08 Each 4.32
1.00 No. Cost of cast iron gratings 32.10 Each 32.10
1.00 No. Plumber I Class 866.00 Each 866.00
Sundries for nails and screws 17.39
Total for 3 RM 1756.71
Rate for 1 RM 585.60

13 Plastering with Cement Mortar 1:3 (One Cement and Three

Sand) 12mm thick mixed with water proofing compound
conforming to BIS at 2% by weight of cement used
0.14 cu.m. including finsihing,
Cement mortar 1:3 curing, etc., complete in allcu.m.
floors 0.00
1.344 Kg Water proofing compound 42.70 Kg 57.39
1.10 Nos. Mason I Class 999.00 Each 1098.90
0.50 Nos. Mazdoor I Class 651.00 Each 325.50
1.10 Nos. Mazdoor II Class 534.00 Each 587.40
Total for 10 sq.m. 2069.19
Rate for 1 sq.m. 206.92

14 Supplying and fixing in position CI manhole covers with

CI frames (Heavy duty) of size 60cm x 60cm of best
approved
Sub-Data quality as per standard specification etc.,
complete compying
Labour for fixing with standard
3 Nos. of CIspecifications
1.00 Manhole
Nos. Mason Cover
I Class 999.00 Each 999.00
1.00 Nos. Mazdoor I Class 651.00 Each 651.00
 Total for fixing 3 Nos. 1650.00
For fixing 1 No. 550.00
Main Data
1.00 Nos. Cost of CI Manhole Cover (Heavy 1864.00 Each 1864.00
1.00 Nos. Duty)
Labour charges 550.00 Each 550.00
0.004 cu.m Cement Mortar 1:3 cu.m 0.00
Rate per 1 No. 2414.00

12 0.00 0 Paving the floor with best quality vetrified 0

(Morbonite) Tiles of size 600 x 600 x 8mm of
approved colour, shade and quality laid in cement
mortar 1:3 (one cement and three sand) 20mm
thick in all floors and the top pointed with the
0 0.00 0 white cement (Marbonite)
Using Vitrified mixed same colour
Tiles 0 pigments
0 etc., 0
(Observed Data)
0 10 sq.m. Marbonite Tiles 600 x 600 x 8mm 982.00 sq.m. 9820.00

0 0.21 cu.m. Cement Mortar 1:3 4437.94 cu.m. 931.97

0 4.00 Kg White Cement mixed with colour 27.25 Kg 109.00
pigments
0 1.20 Nos. Mason I Class 999.00 Each 1198.80
0 1.00 Nos. Mason II Class 932.00 Each 932.00
0 0.50 Nos. Stone Cutter I Class 766.00 Each 383.00
0 1.00 Nos. Mazdoor I Class 651.00 Each 651.00
0 1.00 Nos. Mazdoor II Class 534.00 Each 534.00
0 0.50 Kg Cotton Waste 10.40 Kg 5.20
0 0.00 0.00 Total for 10 sq.m. 0.00 0.00 14564.97
0 0.00 0.00 Rate for 1 sq.m. 0.00 0.00 1456.50
0 0.00 0.00 0.00 0.00 0.00 0.00
Flooring with following ceramic tiles of size 305 x 305 x 6 mm
13 0.00 0 laid over 20 mm thick cement mortar 1:3 (One Cement and Three 0.00
crushed stone Sand) base mortar over the existing slab / floor
including cutting the tiles to the required size with special cutter
a 0.00 0 Self Designed Colour Ceramic Tiles of 0.00 0 0.00
size 305 x 305 x 6mm (Observed Data)
0 108.00 Nos. Cost of Tiles 49.00 Each 5292.00
0 0.21 cu.m. Cement Mortar 1:3 4401.35 cu.m. 924.28
0 3.00 Kg White Cement mixed with colour 27.25 Kg 81.75
0 1.20 Nos. pigments
Mason I Class 999.00 Each 1198.80
0 1.00 Nos. Mason II Class 932.00 Each 932.00
0 0.50 Nos. Stone Cutter I Class 766.00 Each 383.00
0 1.00 Nos. Mazdoor I Class 651.00 Each 651.00
0 1.00 Nos. Mazdoor II Class 534.00 Each 534.00
0 0.50 Kg Cotton Waste 10.40 Kg 5.20
0 0.00 0.00 Total for 10 sq.m. 0.00 0.00 10002.03
0 0.00 0.00 Rate for 1 sq.m. 0.00 0.00 1000.20
0 0.00 0.00 0.00 0.00 0.00 0.00
Paving the floor with pre-polished concrete anti-skid tiles
14 0.00 0 (Required shape and design) of 20mm thick of approved quality 0.00
and colour laid in Cement Mortar 1:3 (One Cement and Three
a 0.00 0 crushed stone sand) 20mm thick and pointed0.00
Using anti-skid tiles (Observed Data)
with white cement
0 0.00
0 10.00 Nos. Pre-polished concrete anti-skid tiles 525.00 Each 5250.00
0 0.21 cu.m. Cement Mortar 1:3 4401.35 cu.m. 924.28
0 1.10 Nos. Mason I st Class 999.00 Each 1098.90
0 2.70 Nos. Mason II Class 932.00 Each 2516.40
0 2.70 Nos. Mazdoor I Class 651.00 Each 1757.70
0 3.30 Nos. Mazdoor II Class 534.00 Each 1762.20
0 4.00 Nos. Colour Cement 27.25 Each 109.00
0 0.00 0.00 Total for 10 sq.m. 0.00 0.00 13418.48
0 0.00 0.00 Rate for 1 sq.m. 0.00 0.00 1341.90
0 0 0 Dadooing walls with colour designed digital printed 0.00
ceramic tiles of size 300mm x 450mm x 8mm and
above in best approved quality tiles set in Cement
0 75.00 Nos. Mortar
Cost of 1:2
Tiles(One Cement and Two sand)62.4010mm thick
Each and 4680.00
0 0.10 cu.m. Cement mortar 1:2 6097.03 cu.m. 609.70
0 4.00 Kg White cement mixed with 27.25 Kg 109.00
colouring pigments
0 1.10 Nos. Mason I Class 999.00 Each 1098.90
0 4.10 Nos. Mason II Class 932.00 Each 3821.20
0 2.70 Nos. Mazdoor I Class 651.00 Each 1757.70
0 3.30 Nos. Mazdoor II Class 534.00 Each 1762.20
0 0.00 0.00 Total for 10 sq.m. 0.00 0.00 13838.70
0 0.00 0.00 Rate for 1 sq.m. 0.00 0.00 1383.87
0 0.00 0.00 0.00 0.00 0.00 0.00
15 White washing two coats with freshly burnt white shell
lime in all floors including cost of lime, blue powder fevicol
type gum, brushes, scaffolding charges, etc., complete
complying with standard specification and as directed.
Primer coat
0.07 cu.m. Fine screened shell lime 544.90 cu.m. 38.14
1.60 Nos. Mason II Class 932.00 Each 1491.20
0.50 Nos. Mazdoor I Class 651.00 Each 325.50
2.70 Nos. Mazdoor II Class 534.00 Each 1441.80
LS Gum, conjee water or prickly pear LS 3.81
juice including
Rate for 100 sq.m.necessary firewood 3300.46
and brushes Rate for 1 sq.m. 33.05

16 Painting two coats of newly plastered wall surface with

ready mixed plastic emulsion paint of first class quality and
of approved colour over a priming coat including thorough
scrapping, clean removal of dirt, and including necessary
plaster of paris putty, wherever required etc., complete
10.00 sq.m. Cleaning the plastered surface 5.25 sq.m. 52.50
1.40 Litre Plastic emulsion paint 295.60 Litre 413.84
0.98 Litre Primer 147.50 Litre 144.55
2.20 Nos. Painter I Class 797.00 Each 1753.40
LS Sundries for brushes, crushed stone LS 5.58
sandpaper, plaster of paris putty,
Total for 10 sq.m. 2369.87
etc. Rate for 1 sq.m. 236.99

17 Painting two coats of newly plastered wall surface with

ready mixed plastic Exterior emulsion paint of first class
quality and of approved colour over a priming coat
including thorough scrapping, clean removal of dirt, and
10.00 sq.m. Cleaning the plastered surface 5.25 sq.m. 52.50
 1.40 Litre Plastic emulsion paint 303.80 Litre 425.32
0.98 Litre Primer 151.30 Litre 148.27
2.20 Nos. Painter I Class 797.00 Each 1753.40
LS Sundries for brushes, sand paper, LS 5.74
plaster of10
Total for paris putty, etc.
sq.m. 2385.23
Rate for 1 sq.m. 238.52

Painting Old wood work with one coats of synthetic enamel

18 ready mixed paint of approved quality and colour over one
coat priming coat in all floors including the cost of primer
etc.
For complete complying with standard specification.
finishing coat
Removing paint from doors , windows
10.00 sq.m & wood works by manual labour 8.55 sq.m 85.50

1.33 Lit Ready mix paint 238.90 Lit 317.74

0.70 No Painter I Class 797.00 No 557.90
Ls Sundries for Brushes,soap,putty etc. Ls 3.72
964.86
Rate for 1m2 Rs. 96.49

Supplying and Painting with Old iron works such as steel

19 doors, windows, ventilators window bars balustrades etc.
with one coats of best approved first quality and colour of
L.s synthetic
Clearing enamel
the oldpaintsurfaces
over the existing
by red-oxide priming
L.s 5.25
1.10 manual labour
Lit Synthetic enamel paint 227.60 Lit 250.36
0.70 No Painter I class 797.00 No 557.90
Ls Sundries for Brushes Ls 5.06
818.57
Rate for 1m2 Rs. 81.90
 NAME OF WORK

SPECIAL REPAIRS TO LEAKY ROOF,DAMAGED FLOORING AND INNER & OUTER

PAINTING WORK IN HEALTH SUB CENTRE BUILDING AT DURAIRAJAPURAM IN
THENI DISTRICT
ABSTRACT ESTIMATE
Sl
Quantity Description of Work Rate Unit Amount
No
1 65.29 Dismantling and Clearing away and carefully stacking 41.80 m2 2729
materials useful for reuse of Pressed tiles &
Weathering course concrete etc., complete.

2 82.66 Dismantling Floor finish and dadooing walls in cement 55.70 m2 4604
mortar with mosaic tiles / glazed tiles / cuddapah slabs

3 0.16 Dismantling and clearing away and carefully stacking 3917.00 m3 623
materials useful for reuse of Reinforced Cement
Concrete etc., complete.

4 4.14 Dismantling and clearing away and carefully stacking 257.40 m2 1066
materials useful for reuse of Brick / stone masonry in
lime mortar walls under 3m high etc., complete.
5 12.00 Clean removal of Cement plaster from wall surface etc., 7.70 m2 92
complete.

6 4.20 Brick work in following Cement Mortar using best quality 5806.91 m3 24389
of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" for
foundation and basement including curing, etc.,
complete complying with standard specifiction. In
Cement mortar 1:5 Ground floor

7 6.60 Supplying and erecting steel shuttering including 858.02 m2 5660

necessary supports for plane surfaces for Reinforced
Cement Concrete works such as column footings,
column pedestals, plinth beams, grade beams, staircase
steps, etc. complete

8 1.00 Providing and laying in position, standardised concrete 7840.85 m2 7848

Mix M-20 Grade in accordance using 20mm with IS:456-
2000, and down graded hard broken granite stone jelly
for all RCC items of works with minimum cement content
of 325 kg/ms and maximum water cement ratio of 0.55,
including admixture (plasticiser / super plasticiser) in
recommended proportions as per IS:9103 to accelerate,
retard setting of concrete, etc, complete. Ground floor

9 1.10 Supplying, fabricating and placing in position Mild Steel / 8888.08 Qtl 9785
Ribbed Tor Steel grills for all RCC works as per design
given including cost of steel and G.I. binding wire in all
floors etc. complete

Page 18
Sl
Quantity Description of Work Rate Unit Amount
No
10 52.50 Finishing the top of roof with one course of New Machine 1188.60 m2 62405
pressed tiles of size 230mm x 230mm x 20mm of
approved quality set in Cement Mortar 1:3 (One Cement
and Three Sand) 12mm thick mixed with water proofing
compound conforming to ISS at 2% by weight of cement
used and the joints pointed neatly to full depth of tiles
with the same cement mortar mixed with red oxide and
water proofing compound including curing etc.,
complete.
11 13.20 Finishing the top of roof with one course of Old Machine 882.70 m2 11650
pressed tiles of size 230mm x 230mm x 20mm of
approved quality set in Cement Mortar 1:3 (One Cement
and Three Sand) 12mm thick mixed with water proofing
compound conforming to ISS at 2% by weight of cement
used and the joints pointed neatly to full depth of tiles
with the same cement mortar mixed with red oxide and
water proofing compound including curing etc.,
complete.

12 3.40 Supplying and fixing colour galvalume sheet roof of 1681.40 m2 5717
0.47mm thickand steel tubular box section of
100x50x3mm of 1meter interval including priming coat
fixing in position with all necessary accessories complete
complying with standard specification and as directed by
the departmental officers.

13 12.00 Supplying and fixing in position best approved of BIS 585.60 Rm 7027
quality PVC rain water down fall pipes having a pressure
of 4 kg. / sq.cm including cost of necessry PVC shoe,
PVC bend, cast iron gratings of required diameter and
special clamps, brass screws, nails, etc., and fixing of
cast iron gratings at junction of parapet and the RCC roof
slab including finishing neatly etc., complete. The rate
shall be inclusive of cast of removable cast iron grating
etc., complete 110mm dia PVC Pipe

14 31.00 Plastering with Cement Mortar 1:3 (One Cement and 206.92 m2 6414
Three Sand) 12mm thick mixed with water proofing
compound conforming to BIS at 2% by weight of cement
used including finsihing, curing, etc., complete in all
floors complying with standard specification and as
directed by the departmental officers.

15 1.00 Supplying and fixing in position CI manhole covers with 2414.00 Nos 2414
CI frames (Heavy duty) of size 60cm x 60cm of best
approved quality as per standard specification etc.,
complete compying with standard specifications
16 51.00 Paving the floor with best quality vetrified (Morbonite) 1456.50 Nos 74282
Tiles of size 600 x 600 x 8mm of approved colour, shade
and quality laid in cement mortar 1:3 (one cement and
three sand) 20mm thick in all floors and the top pointed
with the white cement mixed same colour pigments etc.,
17 7.00 Flooring with following ceramic tiles of size 305 x 305 x 6 1000.20 Nos 6996
mm laid over 20 mm thick cement mortar 1:3 (One
Cement and Three crushed stone Sand) base mortar
over the existing slab / floor including cutting the tiles to
the required size with special cutter wherever necessary,
Page 19
Sl
Quantity Description of Work Rate Unit Amount
No
18 36.00 Dadooing walls with colour designed digital printed 1383.87 Nos 49812
ceramic tiles of size 300mm x 450mm x 8mm and above
in best approved quality tiles set in Cement Mortar 1:2
(One Cement and Two sand) 10mm thick and pointing
the joints with white cement mixed with colouring
19 89.99 White washing two coats with freshly burnt white shell 33.05 m2 2974
lime in all floors including cost of lime, blue powder
fevicol type gum, brushes, scaffolding charges, etc.,
complete
20 241.00 Painting two coats of newly plastered wall surface with 236.99 m2 57113
ready mixed Plastic Interior Emulsion Paint of first class
quality and of approved colour over a priming coat
including thorough scrapping, clean removal of dirt, and
including necessary plaster of paris putty, wherever
required etc., complete

21 325.00 Painting two coats of newly plastered wall surface with 238.52 m2 77519
ready mixed Plastic Exterior Emulsion Paint of first class
quality and of approved colour over a priming coat
including thorough scrapping, clean removal of dirt, and
including necessary plaster of paris putty, wherever
required etc., complete

22 33.80 Painting Old wood work with one coats of synthetic 96.49 m2 3261
enamel ready mixed paint of approved quality and colour
over one coat priming coat in all floors including the cost
of primer etc. complete complying with standard
specification.

23 20.80 Supplying and Painting with Old iron works such as steel 81.90 m2 1704
doors, windows, ventilators window bars balustrades etc.
with one coats of best approved first quality and colour of
synthetic enamel paint over the existing red-oxide
priming coat in all floors excluding cost of priming coat
etc. complete complying with standard specification.

426084
Add 18% GST 76695

Add 10% Escalation for the year 2024-25 553057

24 L.s Provision for Labour welfare fund at 1% L.s 5650

25 L.s Provision for Unforeseen items L.s 6293
Total Rs. 565000

(RUPEES FIVE LAKHS AND SIXTY FIVE THOUSAND

ONLY)

Page 20
 SPECIAL REPAIRS TO LEAKY ROOF,PROVIDING SHED AND PAINTING WORK
IN HEALTH SUB CENTRE BUILDING AT DURAIRAJAPURAM IN THENI DISTRICT

Estimate Rs.3,45,000 /-

P.W.D. Buildings (C&M) Division, Theni is maintaining the Health Sub Centre
Building at Durairajapuram in Theni District. The building is found in register of public
buildings vide Register No. .The year of construction is and to carry out the
repair works in the Health Sub Centre Building at Durairajapuram in Theni District,has
been sanctioned by The District Helath Officer,Theni vide Proc No: 1421/A5/2024
Dated:26.04.2024, for Maintenanace and Repair works in various places.The Health Sub
Centre Building at Durairajapuram is one among them to carry out the repair works for
the year 2023 – 2024 for an amount of Rs.3.45 Lakhs.

The Executive Engineer, PWD, Buildings (C&M) Division, Theni has also instructed
to inspect the Health Sub Centre Building at Durairajapuram in Theni District and to
prepare the detailed estimate immediately.
Accordingly, the subject has been discussed with the Concerned Medical Officer
and necessary detailed estimate has been prepared.
1] Dismantling Pressed tiles & Weathering course and Flooring concrete has been
proposed.
2] Clean removal of Cement plaster from wall surface.
3] Old and New Machine Pressed tiles has been proposed over Weathering course
concrete.
4] Plastering with C.M.1:3-12mm thick have been proposed.
5] Front side Shed with Galvalume sheet roofing has been proposed.
6] Necessary Rain water pipe and CI manhole cover has been proposed.
7] White washing two coat for inner area , Painting Exterior Emulsion paint,Old Iron
work and New iron work has been proposed.
In this, estimate L.S. Provisions for Unforeseen item of work have been made. 18%
G.S.T. Tax has been adopted in this estimate for Civil Value. This estimate has been
prepared based on the current schedule of rates for the year 2023 – 2024 and works out
to Rs.3.45 Lakhs - The expenditure which is proposed to be incurred is chargeable
under the “Head of Account -