Combustion Examples
Combustion Examples
ME 440
Aerospace Engineering Fundamentals
Combustion Examples
1
ME 440 Aerospace Engineering Fundamentals Fall 2006
2
ME 440 Aerospace Engineering Fundamentals Fall 2006
1 2 3 4 5 6
3
ME 440 Aerospace Engineering Fundamentals Fall 2006
Previously we found
f t = 897 N ⋅ s/kg
So that we need to find the fuel to air ratio on a mass basis for our burner. With
our fuel as kerosene, we can write our chemical reaction equation as
C14H27 + a(TA)O2 +a(TA)(3.76)N2
→ bCO2 + dH2O +a(TA-1)O2 +a(3.76)(TA)N2
Carrying out the balancing
C: 14 = b
H: 27 = 2d, d =13.5
O: 2a = 2b+d , a = 20.75
Then our chemical reaction equation becomes
C14H27 + (20.75)(TA)O2 + (TA)(78)N2
→ 14CO2 + (13.5)H2O + (20.75)(TA-1)O2 +(78)(TA)N2
Our TA will come form our conservation of energy equation. We assume that the
burner is adiabatic, so that
Q=0
and
HR = HP
We can then write
hf,C14H27 + cP,C14H27(Tfuel-298) + (20.75)(TA)cP,O2(T3-298) + (TA)(78)cP,c14H27(T3-298)
= 14{hf,CO2 + cP,CO2(T4-298)} + 13.5{hf,H2O + cP,H2O(T4-298)}
+ (20.75)(TA-1)cP,O2(T4-298) + (TA)(78)cP,c14H27(T3-298)
Since it was not specified, we will assume that our fuel will enter the burner at 298 K.
Then solving for TA we have
TA = [14{h f ,CO 2 + c P,CO 2 (T4 − 298)} + 13.5{h f ,H 2O + c P,H 2O (T4 − 298)} − h f ,C14H 27
− (20.75)c P,O 2 (T4 − 298)]
÷ [(20.75)c P,O 2 (T3 − 298) + (78)c P, N 2 (T3 − 298) − (20.75)c P,O 2 (T4 − 298)
− (78)c P, N 2 (T4 − 298)]
Calculating we find
TA = 2.31
Our fuel to air ratio is given by
(1mole)(MWC14H 27 ) (1mole)(195)
(FA)mass = = = 0.03
(20.75)(4.76)(TA )(MWair ) (20.75)(4.76)(2.31)(28.8)
Then
0.03
SFC = = 3.31 × 10 -5 (kg/s)/Nt
897
4
ME 440 Aerospace Engineering Fundamentals Fall 2006
The required mass flow rate of fuel to produce 6000 Nt of thrust is given by
m& fuel = (FA) mass m
& air
where
F 6000
m& air = t = = 6.69kg / s
ft 897
Then
m& fuel = (0.03)(6.69) = 0.2kg / s