User Guide

Contents
About This Document
Appearance and Ports
Assembling and Disassembling the Monitor
Pivot
Connecting the Monitor to a Device (such as a computer)
Using the Five-Way Joystick to Power On/Off and Configure
the Settings
Menu Options for the Monitor
FAQs
Safety information
Legal Notice

i
About This Document
Please read this document before you begin using the device.
Some components mentioned in the document may not be included with the device, and
need to be purchased separately. Some features described in this document are only available
when used together with other components. The figures and Graphical User Interfaces (GUIs)
in this document may differ from reality, and all figures are for reference only.

1
Appearance and Ports

No. Button
1 Five-way joystick
• Press upward to power on the device. Press and hold for more than 2 seconds to
power off the device.
• Press upward, forward, backward, leftward, or rightward when the device is
powered on, to open the menu. Press forward, backward, leftward, or rightward
to configure the settings.
For details, please refer to Using the Five-Way Joystick to Power on/off and
Configure the Settings.

2
 Appearance and Ports
No. Button
2 Five-way joystick protective case*
Protects the five-way joystick from damage during initial assembly.
Only SSN-CBA and SSN-CBABZ are relevant to the five-way joystick
protective case.

3 Power port
Connects to a power adapter to supply power to the monitor.

4 DisplayPort (DP)
Connects to a device, such as a computer, via the DP.

5 HDMI port
Connects to a device, such as a computer, via the HDMI port.

3
Assembling and Disassembling the
Monitor
Configuring SSN-CAA:

1 Place the carton horizontally with the foam arrow facing upwards, open the carton, and
take out the device and foam.
2 Remove the base from the foam.
3 Lift the display post slightly, and attach the base to the bottom of the post. When you
hear a click, it means that the base has been correctly attached.
4 Hold the assembled monitor with both hands, and place it on a flat desk. Feel free to
adjust the tilt angle to suit your needs.
5 To disassemble the monitor, place it on the desk, push the quick-release tab on the base
inwards with one hand, and hold the post with the other hand to push the base outwards.
Configuring SSN-CBA:

4
 Assembling and Disassembling the Monitor

1 Place the carton horizontally with the foam arrow facing upwards, open the carton, and
take out the device and foam.
2 Remove the base support from the foam, and use screws to connect the base to the
support.
3 Tilt the upper end of the base support so that it fits into the slot on the back of the
monitor, and press the base support downwards until you hear a clicking sound, which
indicates that the base support has been correctly attached.
4 Hold the assembled monitor with both hands, and place it on a flat desk. Feel free to
adjust the tilt angle, swivel angle, and height to suit your needs.
5 To disassemble the monitor, place it on the desk, push the quick release button on the
back of the monitor upwards, and lift the bottom of the support.
Configuring SSN-CAABZ:

5
 Assembling and Disassembling the Monitor

1 Place the carton horizontally with the foam arrow facing upwards, open the carton, and
take out the device and foam.
2 Remove the base from the foam.
3 Lift the display post slightly, and attach the base to the bottom of the post. When you
hear a click, it means that the base has been correctly attached.
4 Hold the assembled monitor with both hands, and place it on a flat desk. Feel free to
adjust the tilt angle to suit your needs.
5 To disassemble the monitor, place it on the desk, push the quick-release tab on the base
inwards with one hand, and hold the post with the other hand to push the base outwards.
Configuring SSN-CBABZ:

6
 Assembling and Disassembling the Monitor

1 Place the carton horizontally with the foam arrow facing upwards, open the carton, and
take out the device and foam.
2 Remove the base support from the foam, and use screws to connect the base to the
support.
3 Tilt the upper end of the base support so that it fits into the slot on the back of the
monitor, and press the base support downwards until you hear a clicking sound, which
indicates that the base support has been correctly attached.
4 Hold the assembled monitor with both hands, and place it on a flat desk. Feel free to
adjust the tilt angle, swivel angle, and height to suit your needs.
5 To disassemble the monitor, place it on the desk, push the quick release button on the
back of the monitor upwards, and lift the bottom of the support.

7
Pivot

Erect the monitor, adjust the height and tilt angle of the screen to the maximum, face the
screen, and rotate the screen 90 degrees clockwise until the screen is in portrait mode.
This feature is only available on SSN-CBA and SSN-CBABZ.

8
Connecting the Monitor to a Device (such
as a computer)

1 Connect one end of a DP or HDMI cable to the DP or HDMI port on the monitor, and
connect the other end to the DP or HDMI port on a computer.
2 Connect other cables, such as power cables, between the monitor and computer, and then
power on both devices. If the computer screen is displayed on the monitor, it indicates
that the connection is successful.

9
Using the Five-Way Joystick to Power
On/Off and Configure the Settings

The monitor's five-way joystick can be used to power the monitor on/off and configure the
settings.
Powering the monitor on/off
• Powering on: Press the joystick upward. Once the brand logo appears on the monitor
screen, the indicator will turn on and the monitor will be powered on.
When the monitor is working, the indicator will be lit. When the monitor has no signal
input, it will enter Standby mode. If the LED power button is set to On in standby, the
indicator will flash white in Standby mode.
• Powering off: Press and hold the joystick upward for more than 2 seconds. The indicator
will turn off and the monitor will power off.
Configuring the settings:

1 With the monitor powered on, press the five-way joystick upward when facing the
monitor, to open the menu.
2 On the menu screen, operate the five-way joystick as instructed when facing the monitor,
to change the settings:

Press the joystick forward, backward, leftward, and rightward to switch between
options.

10
 Using the Five-Way Joystick to Power On/Off and Configure the Settings

Press leftward to return to the upper-level menu, or exit the menu.

Press upward or rightward to confirm the settings.

11
Menu Options for the Monitor
Menu items may vary depending on the monitor model and version.

Level-1 Menu Level-2 Menu Description

P3 color P3 color is recommended for users who usually browse
images in the P3 color gamut, or those who
Picture preferbright colors.
mode sRGB color sRGB color is recommended for when you browse
images on a computer.

HDR color HDR color mode features HDR color correction, and is
recommended for when you watch videos.

Game Game mode is recommended for when you play games.

eBook eBook mode is recommended for when you read, as it

provides a paper-like display.

Custom You can set the display effects on your own.

Brightness The value ranges from 0 to 100.

Contrast The value ranges from 0 to 100.

Display
This feature is only available in Custom, sRGB
color, and P3 color modes, when Eye Comfort
mode is disabled.

Sharpness The value ranges from 0 to 100.

Eye Comfort You can enable or disable Eye Comfort mode.

When you plan on reading for an extended period
of time, Eye Comfort mode can help you avoid eye
fatigue. Once it is enabled, the screen will take on
a mild yellow tint.
This feature is only available in Custom, sRGB
color, and P3 color modes, and is disabled in other
picture modes by default.

Color temp You can set the color temperature to Cool,

Neutral,Standard, or Warm.
You can also set Red, Green, and Blue to any value
between 0 and 100 in Custom.
This feature is only available in Custom, sRGB
color, and P3 color modes, when Eye Comfort
mode is disabled.

12
 Menu Options for the Monitor
Level-1 Menu Level-2 Menu Description
Scaling You can set the scaling to Full screen or Scaled.

HDMI You can select the corresponding input source based on

the cable connecting the monitor to any other devices.
Input DP
source

Refresh rate In gaming scenarios, you can configure auxiliary

settings.
Game
After enabling this feature, you'll be able choose to
assist
display the refresh rate in the top left or right corner of
the screen.

Crosshairs After enabling this feature, you'll be able to set the

crosshair displayed on the screen as red or green, or
reset its position.

AMD FreeSync This feature can be enabled or disabled. After enabling

this feature, you can enjoy a smooth gaming experience
free of screen distortion.

Response time This feature can be enabled or disabled. After enabling

this feature, you'll be able to set the response time to
Standard, Fast, or Super-fast.

Up The upper option on the OSD shortcut menu is set to

Brightness by default. You can also change it to another
setting, such as Picture mode, Response time, Input
Shortcuts source, or Contrast.

Down The lower option on the OSD shortcut menu is set to

Picture mode by default. You can also change it to
another setting, such as Brightness, Response time,
Input source, or Contrast.

Language You can set the menu language to simplified Chinese,

American English, Japanese, or another language.

Settings Menu settings Menu transparency: You can set the menu
transparency to any value between 1 and 8. A larger
value indicates a higher transparency.

Menu timeout: You can set how long the menu will
display to any value between 10 seconds and 100
seconds.

13
 Menu Options for the Monitor
Level-1 Menu Level-2 Menu Description
LED power button On in standby: Once this feature is enabled, the
indicator on the monitor will flash white in Standby
mode.

Off in standby: Once this feature is enabled, the

indicator on the monitor will turn off in Standby mode.

About Allows you to view the monitor's SN, firmware version,

picture mode, resolution, refresh rate, and input source.

Eco mode This mode can be enabled or disabled.

This feature is disabled by default. Enabling this feature
will reduce power consumption. After enabling Eco
mode, you won't be able to apply certain settings, such
as Brightness.

Factory reset Restores the menu to its factory settings.

14
FAQs
Unable to power on the display
• Check whether the display is powered on.
• Check whether the power adapter is correctly connected to the display and the power
supply.
There are no images on the display
• Check whether all of the cables are correctly connected.
• Check whether the display and the tower are powered on.
• Check whether the DP or HDMI signal cable is damaged.
• If the preceding issues do not occur, restart the display and the tower, then check whether
the images can be properly displayed on the screen.
The screen is too dark or too bright
• Open the settings menu on the display and adjust the screen brightness and contrast.

The screen color is abnormal

• Check whether the DP or HDMI signal cable is damaged. For example, the pins may be
bent.
• Open the settings menu on the display and adjust the color temperature.

15
Safety information
This section contains important information about the operation of your device. It also
contains information about how to use the device safely. Read this information carefully
before using your device.

Electronic device
Do not use your device if using the device is prohibited. Do not use the device if doing so
causes danger or interference with other electronic devices.

Interference with medical equipment

• Follow rules and regulations set forth by hospitals and health care facilities. Do not use
your device where prohibited.
• Some wireless devices may affect the performance of hearing aids or pacemakers. Consult
your service provider for more information.
• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained
between a device and a pacemaker to prevent potential interference with the pacemaker. If
using a pacemaker, hold the device on the side opposite the pacemaker and do not carry
the device in your front pocket.
• Please consult your doctor and the device manufacturer to determine if using your device
may interfere with the operation of your medical device.

Areas with flammables and explosives

• Do not use the device where flammables or explosives are stored (in a gas station, oil
depot, or chemical plant, for example). Using your device in these environments increases
the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols.
• Do not store or transport the device in containers with flammable liquids, gases, or
explosives.

Operating environment
• Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these
environments may result in circuit malfunctions.
• Before connecting and disconnecting cables, stop using the device and disconnect it from
the power supply. Ensure that your hands are dry during operation.
• During thunderstorms, power off your device and remove all cables connected to it to
protect against lightning strikes.
• Do not use your device during thunderstorms to protect your device against any danger
caused by lightning.
• Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -10 °C to
+45 °C. Extreme heat or cold may damage your device or accessories.
• To protect your device or accessories from fire or electrical shock hazards, avoid rain and
moisture.
16
 Safety information
• Keep the device away from sources of heat and fire, such as a heater, microwave oven,
stove, water heater, radiator, or candle.
• Stop using your device or applications for a while if the device is overheated. If skin is
exposed to an overheated device for an extended period, low temperature burn symptoms,
such as red spots and darker pigmentation, may occur.
• Do not allow children or pets to bite or suck the device or accessories. Doing so may result
in damage or explosion.
• Observe local laws and regulations, and respect the privacy and legal rights of others.
• Do not place any object, such as a candle or a water container, on the device. If any foreign
object or liquid enters the device, immediately stop using it, power it off, and remove all
cables connected to it. Then, contact a Huawei authorized service center.
• Place this device in a place where it can be kept stable at all times. Otherwise, the device
may fall over and may cause serious personal injury or death.

Stability hazard: This device may tip over, causing serious personal injury or death.
Many injuries, especially to children, can be avoided by taking simple precautions such as:
• Always use cabinets or brackets recommended by the manufacturer of this equipment.
• Always use furniture that securely supports the device and always ensure that the device
does not protrude from the edge of the supporting furniture.
• Never place the device in an unstable position, and never place it on high furniture, such as
cabinets or bookcases.
• Always route the wires and cables connected to the device so that they do not trip, pull, or
grab.
• Do not place fabric or other materials between this equipment and supporting furniture.
• Always make children aware of the dangers of climbing furniture to reach the device or its
controls.
• Do not place objects, such as toys, that may induce children to climb on top of the device
or on the furniture where the device is placed.
• Follow the same safety precautions if existing equipment needs to be retained and
repositioned.

Child safety
• Comply with all precautions with regard to child safety. Letting children play with the
device or its accessories may be dangerous. The device includes detachable parts that may
present a choking hazard. Keep away from children.
• The device and its accessories are not intended for use by children. Children should only use
the device with adult supervision.

Accessories
• Using an unapproved or incompatible power adapter, charger or battery may cause fire,
explosion or other hazards.
17
 Safety information
• Choose only accessories approved for use with this model by the device manufacturer. The
use of any other types of accessories may void the warranty, may violate local regulations
and laws, and may be dangerous. Please contact your retailer for information about the
availability of approved accessories in your area.

Power adapter safety

• The power plug is intended to serve as a disconnect device.
• For pluggable devices, the socket-outlet shall be installed near the devices and shall be
easily accessible.
• Unplug the power adapter from electrical outlets and the device when not in use.
• If the power cable is damaged (for example, the cord is exposed or broken), or the plug
loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or
fire.
• Do not touch the power cord with wet hands or pull the power cord to disconnect the
power adapter.
• Do not touch the device or the power adapter with wet hands. Doing so may lead to short
circuits, malfunctions, or electric shocks.

Cleaning and maintenance

• Keep the device and accessories dry. Do not attempt to dry it with an external heat source,
such as a microwave oven or hair dryer.
• Do not expose your device or accessories to extreme heat or cold. These environments may
interfere with proper function and may lead to fire or explosion.
• Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion.
• Before you clean or maintain the device, stop using it, stop all applications, and disconnect
all cables connected to it.
• Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and
benzene) to clean the device or accessories. These substances may cause damage to parts
or present a fire hazard. Use a clean, soft, and dry cloth to clean the device and accessories.
• Do not dismantle or remanufacture the device and its accessories. This voids the warranty
and releases the manufacturer from liability for damage. In case of damage, contact a
Huawei authorized service center for assistance or repair.
• If the device screen is broken in a collision, immediately stop using the device. Do not touch
or attempt to remove the broken parts. Promptly contact a Huawei authorized service
center.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging means that the products and
batteries should be taken to separate waste collection points designated by local authorities
18
 Safety information
at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner
that conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste
disposal service or visit the website https://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and its electrical accessories comply with local applicable rules on the restriction
of the use of certain hazardous substances in electrical and electronic equipment, such as EU
REACH regulation, RoHS and Batteries (where included) directive. For declarations of
conformity about REACH and RoHS, please visit the website
https://consumer.huawei.com/certification.

19
Legal Notice
Copyright © Huawei 2022. All rights reserved.
The product described in this manual may include copyrighted software of Huawei and
possible licensors. Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the
said software, unless such restrictions are prohibited by applicable laws or such actions are
approved by respective copyright holders.

Trademarks and Permissions

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the
HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Other trademarks, product, service and company names mentioned may be the property of
their respective owners.

Open Source Software Notice

For details about the Open Source Software Notice, please visit
https://consumer.huawei.com/en/support/content/en-us15892133/.

Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and therefore may not be activated or may
be limited by local network operators or network service providers.
Thus, the descriptions herein may not exactly match the product or its accessories which you
purchase.
Huawei reserves the right to change or modify any information or specifications contained in
this manual without prior notice and without any liability.

DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR
LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED
SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORESEEABLE OR NOT.

20
 Legal Notice
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR
PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF
HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL
BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and be
responsible to obtain all necessary governmental permits and licenses in order to export, re-
export or import the product mentioned in this manual including the software and technical
data therein.

Privacy Policy
To better understand how we protect your personal information, please see the privacy policy
at https://consumer.huawei.com/privacy-policy.

For More Help

Visit https://consumer.huawei.com/en/support for the most up-to-date contact information
for your country or region.

ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE
DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE
ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED.

21