Mechanical Valves

Series VM

Model VM1000 VM100 VM200

Side ported 11 x 36 x 16 Side ported 17 x 44 x 25
Dimensions (mm) Bottom ported 11 x 28 x 25 Bottom ported 17 x 44 x 30
25 x 40 x 52

Basic

Roller lever

One way roller lever

Straight plunger

Roller plunger

Cross roller plunger

Toggle lever

Push button (Mushroom)

Push button (Extended)

Push button (Flush)

Twist selector (2 position)

Key selector (2 position)

Twist selector (3 position)

Foot pedal

Push-pull

P. 5-6-8 P. 5-6-12 P. 5-6-20

Effective area (mm2) 1 2.5 19
Number of ports 2, 3 2, 3 2, 3
Poppet Poppet Poppet

Function

5-6-2
 Mechanical Valves Series VM

Mechanical Valves S
A

V
A
VM400 VZM500 VZM400 VFM300 VFM200 VM800 S
A
21 x 35 x 53 18 x 28 x 87 18 x 30 x 91 26 x 35 x 94 23 x 40 x 115 30 x 40 x 57
V
A
VM
VR
VH
VHS

Roller lever

Adjustable
roller lever

Adjustable
rod lever

P. 5-6-26 P. 5-6-41 P. 5-6-35 P. 5-6-48 P. 5-6-54 P. 5-6-32

7 10.8 9.9 18 18 6
3 5 5 5 5 3
Balanced poppet Rubber spool Metal spool Rubber spool Metal spool Balanced poppet
∗ ∗

∗ Dual pressure is available only on external pilot.

5-6-3
 Mechanical Valves Series VM
Precautions
Be sure to read before handling. Refer to pages 5-12-2 to 6 for Safety lnstructions and Solenoid Valve Precautions.

Mounting Definition of Symbol

Warning
1. Conditions for mechanical operation
Do not move the mechanical operation beyond the
operating limit position, as this could damage the S
A
mechanical valve itself and lead to equipment mal-
function. V
A
• Actuator stroke
Operate the mechanism within the stroke range that has S
A
been obtained through the formula given below. (Do not
move beyond the operating limit position.) V
A
Operating stroke: (P.T. + 0.5 x O.T.) to (P.T. + O.T. – 0.1)

Actuator stroke
VM
Series Actuator
(mm)
T.T. = 4.8 mm 3.7 to 4.7 VR
Basic
(T.T. = 2.5 mm) (2.2 to 2.4)
VM1000 F.P. (Free Position) ············· No external force applied.
Roller lever 3.5 to 4.4 VH
One way roller lever 3.5 to 4.4 O.P. (Operating Position) ····· Internal valve opening position.
Basic 2.2 to 2.9 T.T.P. (Total Travel Position)···· Includes over travel. VHS
Roller lever 4.3 to 5.3 O.F. (Operating Force)········· Operating force required to initial
One way roller lever 4.3 to 5.3 valve opening position.
VM100
Straight plunger 2.7 to 3.4 F.O.F. (Full Operating Force) ·· Required force to total travel
Roller plunger 2.7 to 3.4 position.
Cross roller plunger 2.7 to 3.4
P.T. (Pre-travel) ··················· From free position to initial valve
Basic 4.0 to 4.9
Roller lever 8.7 to 10.7
operating position.
One way roller lever 9.5 to 11.7 O.T. (Over Travel)················· From initial valve operating
VM200 position to total travel position.
Straight plunger 4.5 to 5.4
Roller plunger 4.5 to 5.4 T.T. (Total Travel) ················· From free position to total travel
Cross roller plunger 4.5 to 5.4 position.
Basic 2.5 to 3.4
Roller lever 6.2 to 8.2 Caution
One way roller lever 6.5 to 8.7
VM400 This product cannot be used for applications in which the
Straight plunger 4.5 to 5.4
Roller plunger 4.5 to 5.4 pressure must be sealed because there will be a slight leakage.
Cross roller plunger 4.5 to 5.4 Please consult with SMC for this type of application.
Basic 2.0 to 2.9
VZM500
Roller lever 4.2 to 6.0
VZM400
One way roller lever 4.7 to 6.7
VFM300
VFM200 Straight plunger 2.5 to 3.4
Roller plunger 2.5 to 3.4
For straight and roller plunger types, there is a groove indicating
P.T. and T.T. for stroke adjustment.

Pressure Source
Warning
Operable fluid is either air or inert gas only. It cannot be used for
corrosive gas and fluid.

Caution
When using vacuum pressure for VM100, supply vacuum
pressure to P port.

5-6-5
Series VM
Precautions
Be sure to read before handling. Refer to pages 5-12-2 to 6 for Safety lnstructions and Solenoid Valve Precautions.

Mounting Environments
Warning Caution
2. Conditions for mechanical operation 1. Do not operate it in an area in which fluids such as oil,
• Cam and dog angle and maximum speed coolant, or water splash on it or dust comes in contact with it.
Select the angle and the maximum speed of the operating Because it does not have a waterproof or dustproof
cam and the dog of the mechanism from within the construction, fluids or dust could enter the valve, leading to
selection range given in the table below. malfunction. Therefore, take measures such as providing a
If they are operated beyond the selection range, the cam and the protective cover to prevent direct exposure.
dog could apply impact shocks to the actuator, leading to damage.
Maintenance
Angle limit Max. speed limit
Series Actuator
switch actuator switch actuator (m/s) Warning
30° 0.7 1. Perform inspections on a regular basis as necessary,
Roller lever
45° 0.3 such as at the beginning of an operation, to make sure
VM1000
30° 0.7 that the mechanical valve operates properly.
One way roller lever
45° 0.3 Failure to observe this precaution could lead to unsafe
30° 0.7 operation, such as unintended operation or malfunction.
Roller lever
45° 0.3
VM100
One way roller lever
30° 0.7 How to Change the Buttons
VM200 45° 0.3
VM400 Straight plunger — 0.2
Replace the button in the following manner to change color of the button.
Roller plunger 30° 0.3 1. Push button (Flush type)
Cross roller plunger 30° 0.3 • Installation ···· Of the four colors, red, green, black, and yel-
30° 1.5 low, select and align the protruding portion of the button with
Roller lever the recessed portion of the body and push in.
VZM500 45° 0.7
VZM400 30° 0.7 • Removal ···· Remove the fastening ring and insert the tip of a
One way roller lever small flat screwdriver into the groove of the button to pry it
VFM300 45° 0.3
VFM200 Straight plunger — 0.4 up. Flat button
Roller plunger 30° 0.7 Groove
30° 0.5
Roller lever
45° 0.2 Protrusion
VM800 30° 0.2
Adjustable roller lever
45° 0.1
Adjustable rod lever — 0.2 Recessed portion

Avoid abrupt angles on limit switch actuator. Fastening ring

(Bad) (Good)

Below 45° Below 45° 2. Push button (Mushroom and extended types)
Above 45° Abrupt angle
At the time of shipment, only 1 button of the color that you
specified is attached to the body.
Mushroom type Extended type
Align the protruding portion of Align the protruding portion of
External stop the button with the recessed the button with the recessed
(Bad) (Good) (Good) prevent over travel Mounting portion of the body and push portion of the body and push
in. (Use the mark on the in.
Max. travel button as a reference to align
Max. travel the protruding part.)
Placing your finger under the Remove the fastening ring
collar of the button on the and insert the tip of a small
Sufficient travel
Over travel

Removal side of the mark, tilt it flat screwdriver into the

upward. groove of the button to pry it
up.

Cam and Dog Material Mark Flat head

button
Roller material Plunger material Plunger surface finish
Polyacetal Steel Mushroom
Steel Steel, Resin button
Groove
3. Never perform additional machining such as enlarging the Protrusion Protrusion
body mounting holes.
As doing so could lead to abnormal conditions such as air leakage.
Recessed portion
4. Operate all manual valves such as the push pin types, the
selector types, and the flip toggle types with your finger.
If a hammer or other tools are used, or it is operated mechanically
through the use of a cylinder or the like, damage could result.

5-6-6
 Mechanical Valves Series VM
How to remove a mushroom button Replacement parts
1. Use the part numbers listed below to order individual
How to remove at panel mount mushroom head or flat head buttons.
Color Mushroom button Extended button
Red 3402186R 3402187R
Black 3402186B 3402187B
Green 3402186G 3402187G
Support it with Yellow 3402186Y 3402187Y
your finger.
Color Push button (Flush)
Mark Use your thumb to Red 3402188R S
A
pull the button down. Black 3402188B
Green 3402188G
Yellow 3402188Y
V
A
2. To order single fastening ring, use the part number below. S
A
Fastening ring: 3402184
3. To order a single push button for series VM1000 and a single V
A
cover use the part number below.
Color Push button Cover for push button VM
Red 3410701-R
3410703
Black 3410701-B
(White only) VR
Green 3410701-G
VH
VHS

Removing the valve as a unit

Mark
Use your thumb to pry
the button upwards.

5-6-7
 Micro Mechanical Valve

Series VM1000
Miniature stucture requires Specifications
little mounting space. Valve type N.C. poppet
Number of ports 2 or 3
Built-in hose nipple Piping Side or bottom ported
connection. Fluid Air/Inert gas
Operating pressure 0 to 0.8 MPa
Piping options: Ambient and fluid temperature –5 to 60°C (No freezing)
Side piping, Bottom piping Effective area 1 mm2
Lubrication Not required (Use turbine oil Class 1 lSO VG32, if lubricated.)
Over Travel after actuation Fitting With hose nipple
(mechanical operated types) Weight (Basic) 6g

Option
Total travel (T.T.) 2.5 mm (Basic)
• A commercially available actuator for the V microswitch can be installed.
• However, be aware that there are different microswitches, such as the P.T./O.T. or F.O.F. types.
• T.T. 2.5 mm is available for basic style only.

Model
Number Applicable tubing
Actuator Piping of ports Note
T0425 TU0425/ET0403
3 port VM1000-4N-00 VM1000-4NU-00
Side ported
2 port VM1100-4N-00 VM1100-4NU-00
Basic
3 port VM1010-4N-00 VM1010-4NU-00
Mechanical operation

Bottom ported
2 port VM1110-4N-00 VM1110-4NU-00
3 port VM1000-4N-01 VM1000-4NU-01
Side ported
2 port VM1100-4N-01 VM1100-4NU-01
Roller lever
3 port VM1010-4N-01 VM1010-4NU-01
Bottom ported
2 port VM1110-4N-01 VM1110-4NU-01
3 port VM1000-4N-02 VM1000-4NU-02
Side ported
One way 2 port VM1100-4N-02 VM1100-4NU-02
roller lever 3 port VM1010-4N-02 VM1010-4NU-02
Bottom ported
2 port VM1110-4N-02 VM1110-4NU-02
3 port VM1000-4N-08 VM1000-4NU-08
Side ported
2 port VM1100-4N-08 VM1100-4NU-08
Toggle lever
3 port VM1010-4N-08 VM1010-4NU-08
Bottom ported
2 port VM1110-4N-08 VM1110-4NU-08
3 port VM1000-4N-32R VM1000-4NU-32R Red
Side ported
Manual operation

2 port VM1100-4N-32R VM1100-4NU-32R Red

3 port VM1010-4N-32R VM1010-4NU-32R Red
Bottom ported
2 port VM1110-4N-32R VM1110-4NU-32R Red
3 port VM1000-4N-32B VM1000-4NU-32B Black
Side ported
2 port VM1100-4N-32B VM1100-4NU-32B Black
Push button
3 port VM1010-4N-32B VM1010-4NU-32B Black
Bottom ported
2 port VM1110-4N-32B VM1110-4NU-32B Black
3 port VM1000-4N-32G VM1000-4NU-32G Green
Side ported
2 port VM1100-4N-32G VM1100-4NU-32G Green
3 port VM1010-4N-32G VM1010-4NU-32G Green
Bottom ported
2 port VM1110-4N-32G VM1110-4NU-32G Green
Note) To replace the push button and push button cover alone, refer to page 5-6-7.
Other parts and actuator cannot be replaced.

5-6-8
 Micro Mechanical Valve Series VM1000
How to Order

VM1 0 0 0 4N 00 R
Color of push button
Actuator type R Red
Applicable tubing 00 Basic G Green
(Material/Size) 01 Roller lever B Black
4N Nylon ø4/2.5 (T0425) 02 One way roller lever
08 Toggle lever
Nylon ø4/3 (T0403)
32 Push button
S
A
4NU Soft Nylon ø4/2.5 (TS0425)
Polyurethane ø4/2.5 (TU0425)
V
A
Total travel/Basic (T.T.)
0 4.8 mm
S
A
1 2.5 mm (Option)∗ ∗ Basic only.
V
A
Piping
0 Side ported VM
1 Bottom ported

Number of ports
VR
0 3 port
1 2 port VH
VHS
Construction
Side ported/Non-actuated Side ported/Actuated
R. 3 port only
Force

Bottom ported/Non-actuated Bottom ported/Actuated

R. 3 port only
Force

Component Parts
No. Description Material Note No. Description Material Note
q Body PBT y Spring Stainless steel
w Valve POM u Plunger POM T.T. = 2.5 mm only, w/threads
e Valve NBR i Lever Stainless steel
r Retainer POM o Packing NBR
t Spring Stainless steel !1 O-ring NBR

5-6-9
Series VM1000
Series VM1000/Side Ported
Basic JIS Symbol/2 port 3 port
VM1000-4N-00
VM1000-4NU-00
VM1100-4N-00
VM1100-4NU-00 ∗ 0.5 MPa supply
Applicable tubing
T0425 TU0425, T0403, TS0425
Side 3 port VM1000-4N-00 VM1000-4NU-00
ported 2 port VM1100-4N-00 VM1100-4NU-00
F.O.F. ∗ 6N
Mounting hole
Applicable tube P.T. 2.5 mm [2.0 mm]
[ ]: T.T. = 2.5 mm
O.T. 2.3 mm [0.5 mm]
T.T. 4.8 mm [2.5 mm]

Roller lever JIS Symbol/2 port 3 port

VM1000-4N-01
VM1000-4NU-01
VM1100-4N-01
VM1100-4NU-01 ∗ 0.5 MPa supply
Applicable tubing
T0425 TU0425, T0403, TS0425
Side 3 port VM1000-4N-01 VM1000-4NU-01
ported 2 port VM1100-4N-01 VM1100-4NU-01
F.O.F. ∗ 6N
Applicable tube P.T. 2.5 mm
Mounting hole O.T. 2.0 mm
T.T. 4.5 mm

One way roller lever JIS Symbol/2 port 3 port

VM1000-4N-02
VM1000-4NU-02
VM1100-4N-02
VM1100-4NU-02 ∗ 0.5 MPa supply
Applicable tubing
T0425 TU0425, T0403, TS0425
Side 3 port VM1000-4N-02 VM1000-4NU-02
ported 2 port VM1100-4N-02 VM1100-4NU-02
F.O.F. ∗ 6N
Applicable tube P.T. 2.5 mm
Mounting hole O.T. 2.0 mm
T.T. 4.5 mm
Toggle lever Panel mounting hole JIS Symbol/2 port 3 port
VM1000-4N-08 T.T. (Total Travel) 40°
VM1000-4NU-08
VM1100-4N-08
VM1100-4NU-08 Lock nut thick 2

Lock nut thick 2, ∗ 0.5 MPa supply

across flats 14
Applicable tubing
T0425 TU0425, T0403, TS0425
Applicable tube Side 3 port VM1000-4N-08 VM1000-4NU-08
ported 2 port VM1100-4N-08 VM1100-4NU-08
F.O.F. ∗ 4N
P.T. 40°

Push button Panel mounting hole JIS Symbol/2 port 3 port

VM1000-4N-32
VM1000-4NU-32
VM1100-4N-32
VM1100-4NU-32
∗ 0.5 MPa supply
Applicable tubing
T0425 TU0425, T0403, TS0425
Side 3 port VM1000-4N-32 VM1000-4NU-32
ported 2 port VM1100-4N-32 VM1100-4NU-32
Applicable tube Lock nut F.O.F. ∗ 6N
thick 2, P.T. 2.5 mm
across O.T. 2.0 mm
flats 14
T.T. 4.5 mm

5-6-10
 Micro Mechanical Valve Series VM1000
Series VM1000/Bottom Ported
JIS Symbol/2 port 3 port
Basic
VM1010-4N-00
VM1010-4NU-00
VM1110-4N-00
VM1110-4NU-00 ∗ 0.5 MPa supply
Applicable tubing
T0425 TU0425, T0403, TS0425
Bottom 3 port VM1010-4N-00 VM1010-4NU-00
ported 2 port VM1110-4N-00 VM1110-4NU-00
Mounting
F.O.F. ∗ 6N
S
A
Applicable tube hole
P.T. 2.5 mm
O.T. 2.3 mm [0.5 mm] V
A
[ ]: T.T. = 2.5 mm
T.T. 4.8 mm [2.5 mm]

Roller lever JIS Symbol/2 port 3 port S
A

VM1010-4N-01
VM1010-4NU-01 V
A
VM1110-4N-01
VM1110-4NU-01 ∗ 0.5 MPa supply
VM
Applicable tubing
T0425 TU0425, T0403, TS0425
VR
Bottom 3 port VM1010-4N-01 VM1010-4NU-01
ported 2 port VM1110-4N-01 VM1110-4NU-01 VH
F.O.F. ∗ 6N
Applicable tube
Mounting
P.T. 2.5 mm VHS
hole O.T. 2.0 mm
T.T. 4.5 mm
JIS Symbol/2 port 3 port
One way roller lever
VM1010-4N-02
VM1010-4NU-02
VM1110-4N-02
VM1110-4NU-02 ∗ 0.5 MPa supply
Applicable tubing
T0425 TU0425, T0403, TS0425
Bottom 3 port VM1010-4N-02 VM1010-4NU-02
ported 2 port VM1110-4N-02 VM1110-4NU-02
F.O.F. ∗ 6N
Applicable tube P.T. 2.5 mm
Mounting
hole O.T. 2.0 mm
T.T. 4.5 mm

Toggle lever T.T. (Total Travel) 40° Panel mounting hole JIS Symbol/2 port 3 port
VM1010-4N-08
VM1010-4NU-08
VM1110-4N-08
VM1110-4NU-08 Lock nut thick 2

Lock nut thick 2, ∗ 0.5 MPa supply

across flats 14 Applicable tubing
T0425 TU0425, T0403, TS0425
Bottom 3 port VM1010-4N-08 VM1010-4NU-08
Applicable tube ported 2 port VM1110-4N-08 VM1110-4NU-08
F.O.F. ∗ 4N
T.T. 40°

Push button Panel mounting hole JIS Symbol/2 port 3 port

VM1010-4N-32
VM1010-4NU-32
VM1110-4N-32
VM1110-4NU-32
∗ 0.5 MPa supply
Applicable tubing
T0425 TU0425, T0403, TS0425
Bottom 3 port VM1010-4N-32 VM1010-4NU-32
ported 2 port VM1110-4N-32 VM1110-4NU-32
Applicable tube F.O.F. ∗ 6N
Lock nut thick 2, P.T. 2.5 mm
across flats 14 O.T. 2.0 mm
T.T. 4.5 mm

5-6-11
 2/3 Port Mechanical Valve

Series VM100
Compact size. Specifications
Piping Side ported Bottom ported
Piping options: Fluid Air/Inert gas
Side piping, Bottom piping Operating pressure –100 kPa to 1.0 MPa
A variety of actuator types. Ambient and fluid temperature –5 to 60°C (No freezing)
Effective area 2.5 mm2
Lubrication Not required (Use turbine oil Class 1 ISO VG32, if lubricated.)
Port size 18 M5 x 0.8
Weight (Basic) 95 g 110 g

Model
Side ported Bottom ported Actuator
Application
2 port 3 port 2 port 3 port part no.
VM120-01-00 VM130-01-00 VM122-M5-00 VM132-M5-00
Basic —
VM121-01-00 VM131-01-00 VM123-M5-00 VM133-M5-00
Mechanical operation

VM121-01-01 VM131-01-01 VM123-M5-01 VM133-M5-01 — Polyacetal roller

Roller lever
VM121-01-01S VM131-01-01S VM123-M5-01S VM133-M5-01S — Hard steel roller
One way VM121-01-02 VM131-01-02 VM123-M5-02 VM133-M5-02 — Polyacetal roller
roller lever VM121-01-02S VM131-01-02S VM123-M5-02S VM133-M5-02S — Hard steel roller
Straight plunger VM120-01-05 VM130-01-05 VM122-M5-05 VM132-M5-05 VM-05B —
Roller VM120-01-06 VM130-01-06 VM122-M5-06 VM132-M5-06 VM-06B Polyacetal roller
plunger VM120-01-06S VM130-01-06S VM122-M5-06S VM132-M5-06S VM-06BS Hard steel roller
Cross roller VM120-01-07 VM130-01-07 VM122-M5-07 VM132-M5-07 VM-07B Polyacetal roller
plunger VM120-01-07S VM130-01-07S VM122-M5-07S VM132-M5-07S VM-07BS Hard steel roller
Toggle lever VM120-01-08 VM130-01-08 VM122-M5-08 VM132-M5-08 VM-08B
VM120-01-30R VM130-01-30R VM122-M5-30R VM132-M5-30R VM-30AR Red
Push button VM120-01-30B VM130-01-30B VM122-M5-30B VM132-M5-30B VM-30AB Black
(Mushroom) VM120-01-30G VM130-01-30G VM122-M5-30G VM132-M5-30G VM-30AG Green
VM120-01-30Y VM130-01-30Y VM122-M5-30Y VM132-M5-30Y VM-30AY Yellow
VM120-01-32R VM130-01-32R VM122-M5-32R VM132-M5-32R VM-32AR Red
Push button VM120-01-32B VM130-01-32B VM122-M5-32B VM132-M5-32B VM-32AB Black
(Extended)
Manual operation

VM120-01-32G VM130-01-32G VM122-M5-32G VM132-M5-32G VM-32AG Green

VM120-01-32Y VM130-01-32Y VM122-M5-32Y VM132-M5-32Y VM-32AY Yellow
Push button With a set of red,
(Flush) VM120-01-33 VM130-01-33 VM122-M5-33 VM132-M5-33 VM-33A black, green, yellow
VM120-01-34R VM130-01-34R VM122-M5-34R VM132-M5-34R VM-34AR Red
Twist VM120-01-34B VM130-01-34B VM122-M5-34B VM132-M5-34B VM-34AB Black
selector
(2 position) VM120-01-34G VM130-01-34G VM122-M5-34G VM132-M5-34G VM-34AG Green
VM120-01-34Y VM130-01-34Y VM122-M5-34Y VM132-M5-34Y VM-34AY Yellow
Key selector
VM120-01-36 VM130-01-36 VM122-M5-36 VM132-M5-36 VM-36A
(2 position)
VM131-01-35R VM151-01-35R VM133-M5-35R VM153-M5-35R — Red
Twist VM131-01-35B VM151-01-35B VM133-M5-35B VM153-M5-35B — Black
selector VM131-01-35G VM151-01-35G VM133-M5-35G VM153-M5-35G — Green
(3 position) VM131-01-35Y VM151-01-35Y VM133-M5-35Y VM153-M5-35Y — Yellow
(3 port) (5 port) (3 port) (5 port) —
Note 1) Actuator replacement is available for all types except for roller lever, one way roller lever,
and 3 position selector.
Note 2) For push button (mushroom), push button (extended), push button (flush) and a single
unit of fastening ring, refer to pages 5-6-6 to 5-6-7. The other parts are not replaceable.
Note 3) The handle of the selector (2 position and 3 position) cannot be removed or replaced
alone.

5-6-12
 2/3 Port Mechanical Valve Series VM100
How to Order

VM1 3 1 01 01 S
Suffix for indicator light
Suffix for actuator With miniature
Actuator type S Hard steel roller Z indicator light (Bottom
Port size 00 Basic piping type only)
R Red
01 Rc 1 8 01 Roller lever Color of
B Black
M5 M5 x 0.8 (Female thread) push button
02 One way roller lever G Green selector
N01 NPT 1 8 05 Straight plunger Y Yellow S
A
F01 G18 06 Roller plunger

Piping direction and

07 Cross roller plunger Height of rod push Side ported Bottom ported V
A
08 Toggle lever
the length of push rod Long Short Long Short
30 Push button (Mushroom) Actuator 0 1 2 3 S
A
0 Long Side 32 Push button (Extended) Basic 00




1 Short ported
33 Push button (Flush) x
x

2 Long Bottom 34 Twist selector (2 position)
Roller lever 01 V
A
3 Short ported One way roller lever 02 x
x

36 Key selector (2 position) Straight plunger 05
x
x
Number of ports 35 Twist selector (3 position) Roller plunger 06
x
x
VM
2 2 port Cross roller plunger 07
x
x
3 3 port Toggle lever 08
x
x VR
Push button (Mushroom) 30
x
x
Push button (Extended) 32
x
x VH
Push button (Flush) 33
x
x
Twist selector (2 position) 34
x
x
Key selector (2 position) 36
x
x
VHS
Twist selector (3 position) 35 x
x

Combination possible:
, Combination impossible: x
Construction
Side ported Bottom ported
R port
R port 3 port only
3 port only

Non-actuated Non-actuated

Force Force

Actuated Actuated

Component Parts
No. Description Material Note No. Description Material Note
q Valve ZDC Metallic plated y Gasket NBR
w Plunger POM u Cover Rolled steel
e Valve sheet POM i Sub-plate ZDC Metallic plated
r Valve NBR o Hexagon socket head plug Rolled steel
t Spring Stainless steel

5-6-13
Series VM100
Series VM100/Side Ported
Basic Actuator mounting hole JIS Symbol
VM120-01-00 2 port
VM130-01-00
VM121-01-00
VM131-01-00 R port 3 port
(3 port only)

Model L A ∗ 0.5 MPa supply

VM120-01-00 F.O.F. ∗ 20 N
32.5 7.5
VM130-01-00 P.T. 1.5 mm
VM121-01-00 O.T. 1.5 mm
2-4.6 mounting hole 28.5 3.5
VM131-01-00 T.T. 3.0 mm

Roller lever JIS Symbol

VM121-01-01 2 port
VM131-01-01 Polyacetal or hard steel roller
VM121-01-01S
VM131-01-01S R port 3 port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 10 N
P.T. 3.2 mm
O.T. 2.3 mm
2-4.6 mounting hole
T.T. 5.5 mm

One way roller lever JIS Symbol

VM121-01-02 2 port
Polyacetal or hard steel roller
VM131-01-02
VM121-01-02S
VM131-01-02S 3 port
R port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 10 N
P.T. 3.2 mm
2-4.6 mounting hole O.T. 2.3 mm
T.T. 5.5 mm

Straight plunger Panel mounting JIS Symbol

VM120-01-05 Hexagon nut thick 5, hole 2 port
across flats 17
VM130-01-05
3 port

R port
(3 port only)
∗ 0.5 MPa supply
F.O.F. ∗ 23 N
P.T. 2.0 mm
2-4.6 O.T. 1.5 mm
mounting hole T.T. 3.5 mm

Roller plunger Panel mounting JIS Symbol

Hexagon nut thick 5, hole 2 port
VM120-01-06 Polyacetal or across flats 17
VM130-01-06 hard steel roller
VM120-01-06S
VM130-01-06S 3 port

R port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 23 N
P.T. 2.0 mm
2-4.6
mounting hole O.T. 1.5 mm
T.T. 3.5 mm

5-6-14
 2/3 Port Mechanical Valve Series VM100
Series VM100/Side Ported
Cross roller plunger Panel mounting JIS Symbol
Polyacetal or hole
VM120-01-07 hard steel roller 2 port
VM130-01-07 Hexagon nut thick 5,
across flats 17
VM120-01-07S
3 port
VM130-01-07S

R port
(3 port only) ∗ 0.5 MPa supply
F.O.F. ∗ 23 N S
A
P.T. 2 mm
2-4.6
mounting hole
O.T. 1.5 mm V
A
T.T. 3.5 mm

Toggle lever Panel mounting JIS Symbol S
A

hole 2 port
VM120-01-08
VM130-01-08 V
A
Hexagon nut thick 5,
across flats 17 3 port VM
VR
R port
(3 port only)
VH
∗ 0.5 MPa supply
2-4.6
mounting hole F.O.F. ∗ 10 N
VHS
T.T. 60°

Push button (Mushroom) Panel mounting JIS Symbol

VM120-01-30R/B/G/Y hole 2 port
VM130-01-30R/B/G/Y

3 port

R port
(3 port only) ∗ 0.5 MPa supply
F.O.F. ∗ 21 N
P.T. 4.9 mm
2-4.6
mounting hole O.T. 1.6 mm
T.T. 6.5 mm

Push button (Extended) Panel mounting JIS Symbol

VM120-01-32R/B/G/Y hole 2 port
VM130-01-32R/B/G/Y

3 port

R port
(3 port only) ∗ 0.5 MPa supply
F.O.F. ∗ 21 N
2-4.6 P.T. 4.9 mm
mounting hole O.T. 1.6 mm
T.T. 6.5 mm

Push button (Flush) Panel mounting JIS Symbol

VM120-01-33 hole 2 port
VM130-01-33

3 port

R port
(3 port only) ∗ 0.5 MPa supply
F.O.F. ∗ 21 N
2-4.6 P.T. 4.9 mm
mounting hole
O.T. 1.6 mm
T.T. 6.5 mm

5-6-15
Series VM100
Series VM100/Side Ported
Twist selector (2 position) Panel mounting hole
VM120-01-34R/B/G/Y
VM130-01-34R/B/G/Y
JIS Symbol
2 port

3 port

R port
(3 port only)

∗ 0.5 MPa supply

2-4.6
F.O.F. ∗ 15 N
mounting hole
T.T. 90°

Key selector (2 position) Panel mounting hole

VM120-01-36
VM130-01-36
JIS Symbol
2 port

3 port

R port
(3 port only)

∗ 0.5 MPa supply

Key can be removed at the 2-4.6 F.O.F. ∗ 15 N
“on” and “off” positions. mounting hole T.T. 90°

Twist selector (3 position) Panel mounting hole

VM131-01-35R/B/G/Y
VM151-01-35R/B/G/Y
JIS Symbol
3 port

5 port

R port
(3 port only)
∗ 0.5 MPa supply
F.O.F. ∗ 15 N
T.T. 45°

5-6-16
 2/3 Port Mechanical Valve Series VM100
Series VM100/Bottom Ported
Basic JIS Symbol
VM122-M5-00 Actuator mounting hole 2 port
VM132-M5-00
VM123-M5-00
VM133-M5-00 R port 2-M5 x 0.8 depth 4 3 port
(3 port only)

∗ 0.5 MPa supply

Model L A S
A
VM122-M5-00 F.O.F. ∗ 20 N
37.5 7.5
VM132-M5-00 P.T. 1.5 mm
2-4.6 VM123-M5-00 O.T. 1.5 mm
V
A
mounting hole 33.5 3.5
VM133-M5-00 T.T. 3.0 mm
S
A
Roller lever JIS Symbol
VM123-M5-01 2 port
VM133-M5-01
V
A
VM123-M5-01S
VM133-M5-01S
Polyacetal or hard steel roller VM
3 port
R port VR
(3 port only)

∗ 0.5 MPa supply VH

2-M5 x 0.8 depth 4 F.O.F. ∗ 10 N
P.T. 3.2 mm VHS
2-4.6 O.T. 2.3 mm
mounting hole T.T. 5.5 mm

One way roller lever JIS Symbol

VM123-M5-02 2 port
Polyacetal or hard steel roller
VM133-M5-02
VM123-M5-02S
VM133-M5-02S R port 3 port
(3 port only)

2-M5 x 0.8 depth 4 ∗ 0.5 MPa supply

F.O.F. ∗ 10 N
2-4.6
P.T. 3.2 mm
mounting hole
O.T. 2.3 mm
T.T. 5.5 mm

Straight plunger JIS Symbol

VM122-M5-05 2 port
VM132-M5-05 Hexagon nut thick 5,
across flats 17 Panel
mounting hole
R port 3 port
(3 port only)

∗ 0.5 MPa supply

2-M5 x 0.8 depth 4 F.O.F. ∗ 23 N
P.T. 2.0 mm
2-4.6
O.T. 1.5 mm
mounting hole
T.T. 3.5 mm
Panel JIS Symbol
Roller plunger
VM122-M5-06 mounting hole 2 port
VM132-M5-06 Polyacetal or
Hexagon nut thick 5,
hard steel roller
VM122-M5-06S across flats 17
VM132-M5-06S 3 port

R port ∗ 0.5 MPa supply

2-M5 x 0.8 depth 4
(3 port only) F.O.F. ∗ 23 N
2-4.6 P.T. 2.0 mm
mounting hole O.T. 1.5 mm
T.T. 3.5 mm

5-6-17
Series VM100
Series VM100/Bottom Ported
Cross roller plunger Panel mounting JIS Symbol
VM122-M5-07 hole 2 port
Polyacetal or
VM132-M5-07 hard steel roller Hexagon nut thick 5,
VM122-M5-07S across flats 17
VM132-M5-07S 3 port
R port
(3 port only)

∗ 0.5 MPa supply

2-M5 x 0.8 depth 4
F.O.F. ∗ 23 N
P.T. 2 mm
2-4.6 O.T. 1.5 mm
mounting hole
T.T. 3.5 mm

Toggle lever Panel mounting JIS Symbol

VM122-M5-08 hole 2 port
VM132-M5-08
Hexagon nut
thick 5,
across flats 17
3 port
R port
(3 port only)

2-M5 x 0.8
depth 4 ∗ 0.5 MPa supply
2-4.6
mounting hole F.O.F. ∗ 10 N
P.T. 60°

Push button (Mushroom) Panel mounting JIS Symbol

VM122-M5-30R/B/G/Y hole 2 port
VM132-M5-30R/B/G/Y

3 port

2-M5 x 0.8 depth 4

R port
(3 port only) ∗ 0.5 MPa supply
F.O.F. ∗ 21 N
P.T. 4.9 mm
2-4.6 O.T. 1.6 mm
mounting hole T.T. 6.5 mm

Push button (Extended) Panel mounting JIS Symbol

VM122-M5-32R/B/G/Y hole 2 port
VM132-M5-32R/B/G/Y

3 port

R port 2-M5 x 0.8 depth 4

(3 port only) ∗ 0.5 MPa supply
F.O.F. ∗ 21 N
P.T. 4.9 mm
2-4.6 O.T. 1.6 mm
mounting hole T.T. 6.5 mm

Push button (Flush) Panel mounting JIS Symbol

VM122-M5-33 hole 2 port
VM132-M5-33

3 port

R port
(3 port only) 2-M5 x 0.8 depth 4
∗ 0.5 MPa supply
F.O.F. ∗ 21 N
2-4.6 P.T. 4.9 mm
mounting hole O.T. 1.6 mm
T.T. 6.5 mm

5-6-18
 2/3 Port Mechanical Valve Series VM100
Series VM100/Bottom Ported
Twist selector (2 position) Panel mounting hole
VM122-M5-34R/B/G/Y
VM132-M5-34R/B/G/Y
JIS Symbol
2 port

S
A
3 port
V
A
S
A
2-M5 x 0.8 depth 4
V
A
R port
(3 port only)
VM
∗ 0.5 MPa supply
2-4.6 VR
F.O.F. ∗ 15 N
mounting hole
T.T. 90°
VH
Key selector (2 position) Panel mounting hole
VM122-M5-36 VHS
VM132-M5-36
JIS Symbol
2 port

3 port

R port
(3 port only)
2-M5 x 0.8 depth 4

∗ 0.5 MPa supply

Key can be removed at the “on” 2-4.6
and “off” positions. mounting hole F.O.F. ∗ 15 N
T.T. 90°

Twist selector (3 position) Panel mounting hole

VM133-M5-35R/B/G/Y
VM153-M5-35R/B/G/Y
JIS Symbol
3 port

5 port

3-M5 x 0.8
Depth 4
R port
(5 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 20 N
T.T. 45°

5-6-19
 2/3 Port Mechanical Valve

Series VM200
Large flow capacity. Specifications
Fluid Air/Inert gas
A variety of actuator types. Operating pressure 0 to 1.0 MPa
Ambient and fluid temperature –5 to 60°C (No freezing)
Effective area 19 mm2
Lubrication Not required (Use turbine oil Class 1 ISO VG32, if lubricated.)
Port size 14
Weight (Basic) 111 g

Model
No. of ports Actuator
2 port 3 port Application
Actuator part no.
Basic VM220-02-00 VM230-02-00 — —
VM220-02-01 VM230-02-01 VM-01A Polyacetal roller
Mechanical operation

Roller lever
VM220-02-01S VM230-02-01S VM-01AS Hard steel roller
One way VM220-02-02 VM230-02-02 VM-02A Polyacetal roller
roller lever VM220-02-02S VM230-02-02S VM-02AS Hard steel roller
Straight plunger VM220-02-05 VM230-02-05 VM-05A —
VM220-02-06 VM230-02-06 VM-06A Polyacetal roller
Roller plunger
VM220-02-06S VM230-02-06S VM-06AS Hard steel roller
VM220-02-07 VM230-02-07 VM-07A Polyacetal roller
Cross roller plunger
VM220-02-07S VM230-02-07S VM-07AS Hard steel roller
Toggle lever VM220-02-08 VM230-02-08 VM-08A —
VM220-02-30R VM230-02-30R VM-30AR Red
Push button VM220-02-30B VM230-02-30B VM-30AB Black
(Mushroom) VM220-02-30G VM230-02-30G VM-30AG Green
VM220-02-30Y VM230-02-30Y VM-30AY Yellow
VM220-02-32R VM230-02-32R VM-32AR Red
Push button VM220-02-32B VM230-02-32B VM-32AB Black
(Extended) VM220-02-32G VM230-02-32G VM-32AG Green
Manual operation

VM220-02-32Y VM230-02-32Y VM-32AY Yellow

With a set of red,
Push button (Flush) VM220-02-33 VM230-02-33 VM-33A black, green, yellow
VM220-02-34R VM230-02-34R VM-34AR Red
Twist selector VM220-02-34B VM230-02-34B VM-34AB Black
(2 position) VM220-02-34G VM230-02-34G VM-34AG Green
VM220-02-34Y VM230-02-34Y VM-34AY Yellow
Key selector (2 position) VM220-02-36 VM230-02-36 VM-36A —
VM230-02-35R VM250-02-35R — Red
VM230-02-35B VM250-02-35B — Black
Twist selector
VM230-02-35G VM250-02-35G — Green
(3 position)
VM230-02-35Y VM250-02-35Y — Yellow
(3 port) (5 port) — —
Foot pedal VM220-02-40 VM230-02-40 — —
Note 1) Actuator replacement is available for all types except twist selector (3 position) and
foot pedal.
Note 2) For push button (mushroom), push button (extended), push button (flush) and a single
unit of fastening ring, refer to pages 5-6-6 to 5-6-7. The other parts are not
replaceable.
Note 3) The handle of the selector (2 position and 3 position) cannot be removed or replaced
alone.

5-6-20
 2/3 Port Mechanical Valve Series VM200
How to Order

VM2 3 0 02 01 S
Suffix for actuator
Actuator type S Hard steel roller
Port size 00 Basic R Red
02 Rc 1 4 01 Roller lever Color of
B Black
N02 NPT 1 4 02 One way roller lever push button
G Green
F02 G14 05 Straight plunger Y Yellow
selector S
A
06 Roller plunger
Number of ports 07 Cross roller plunger V
A
2 2 port 08 Toggle lever
3 3 port Push button (Mushroom)
30
Push button (Extended)
S
A
32
33 Push button (Flush)
34 Twist selector (2 position) V
A
36 Key selector (2 position)
35 Twist selector (3 position) VM
40 Foot pedal
VR
Construction
VH
Non-actuated Actuated
Force
EXH port VHS
3 port only

Component Parts
No. Description Material Note No. Description Material Note
q Valve ADC Metallic plated r Cover POM
w Plunger POM t Valve Brass, NBR
e Plunger retainer PBT y Spring Steel

5-6-21
Series VM200
Series VM200
Basic 2-M3x0.5 JIS Symbol
VM220-02-00 Actuator mounting hole 2 port
VM230-02-00

3 port

EXH port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 52 N
2-5.5 P.T. 3.0 mm
mounting hole O.T. 2.0 mm
T.T. 5.0 mm

Roller lever JIS Symbol

VM220-02-01 2 port
ø17 polyacetal or hard steel roller
VM230-02-01
VM220-02-01S
VM230-02-01S 3 port
EXH port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 24 N
P.T. 6.5 mm
2-5.5 O.T. 4.5 mm
mounting hole T.T. 11.0 mm

One way roller lever JIS Symbol

ø17 polyacetal or hard steel roller
VM220-02-02 2 port
VM230-02-02
VM220-02-02S
VM230-02-02S 3 port

EXH port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 22 N
P.T. 7.0 mm
O.T. 5.0 mm
2-5.5 mounting hole
T.T. 12.0 mm

Straight plunger JIS Symbol

VM220-02-05 2 port
VM230-02-05 Hexagon nut
thick 6,
across flats 27
EXH port 3 port
(3 port only)
Panel mount
hole

∗ 0.5 MPa supply

2-5.5 mounting hole F.O.F. ∗ 56 N
P.T. 3.5 mm
O.T. 2.0 mm
T.T. 5.5 mm

5-6-22
 2/3 Port Mechanical Valve Series VM200
Series VM200
Roller plunger JIS Symbol
VM220-02-06 2 port
ø17 polyacetal or hard steel roller
VM230-02-06
VM220-02-06S
VM230-02-06S Hexagon nut thick 6,
across flats 27 Panel mounting 3 port
EXH port hole
(3 port only)

S
A

∗ 0.5 MPa supply

V
A
F.O.F. ∗ 56 N
P.T. 3.5 mm S
A
2-5.5
mounting hole O.T. 2.0 mm
T.T. 5.5 mm V
A
Cross roller plunger JIS Symbol
VM220-02-07
ø17 polyacetal or hard steel roller
2 port VM
VM230-02-07
VM220-02-07S
Hexagon nut thick 6, VR
across flats 27
VM230-02-07S 3 port
EXH port Panel mounting VH
(3 port only) hole
VHS

∗ 0.5 MPa supply

F.O.F. ∗ 56 N
2-5.5 P.T. 3.5 mm
mounting hole
O.T. 2.0 mm
T.T. 5.5 mm

Toggle lever JIS Symbol

VM220-02-08 2 port
VM230-02-08

Hexagon nut thick 6,

across flats 27 3 port
EXH port
Panel mounting
(3 port only)
hole

2-5.5 ∗ 0.5 MPa supply

mounting hole
F.O.F. ∗ 12 N
T.T. 60°

Push button (Mushroom) Panel mounting JIS Symbol

VM220-02-30R/B/G/Y hole 2 port
VM230-02-30R/B/G/Y

3 port

EXH port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 52 N
2-5.5 P.T. 4.9 mm
mounting hole O.T. 1.6 mm
T.T. 6.5 mm

5-6-23
Series VM200
Series VM200
Push button (Extended) JIS Symbol
VM220-02-32R/B/G/Y 2 port
VM230-02-32R/B/G/Y

3 port

Panel mounting hole

EXH port
(3 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 52 N
2-5.5 P.T. 4.9 mm
mounting hole O.T. 1.6 mm
T.T. 6.5 mm

Push button (Flush) JIS Symbol

VM220-02-33 2 port
VM230-02-33

3 port

Panel mounting hole

EXH port
(3 port only)

∗ 0.5 MPa supply

2-5.5 F.O.F. ∗ 52 N
mounting hole P.T. 4.9 mm
O.T. 1.6 mm
T.T. 6.5 mm

Twist selector (2 position) JIS Symbol

VM220-02-34R/B/G/Y 2 port
VM230-02-34R/B/G/Y

3 port

Panel mounting hole

EXH port
(3 port only)

2-5.5
mounting hole ∗ 0.5 MPa supply
F.O.F. ∗ 32 N
T.T. 90°

5-6-24
 2/3 Port Mechanical Valve Series VM200
Series VM200
Key selector (2 position) Panel mounting hole
VM220-02-36
VM230-02-36

JIS Symbol
2 port S
A
V
A

3 port S
A
EXH port
(3 port only) V
A
VM
∗ 0.5 MPa supply
Key can be removed at the
2-5.5
mounting hole F.O.F. ∗ 32 N
VR
“on” and “off” positions.
T.T. 90°
VH
Twist selector (3 position) Panel mounting hole
VM230-02-35R/B/G/Y VHS
VM250-02-35R/B/G/Y

JIS Symbol
2 port

EXH port
EXH port 5 port
(5 port only)
(5 port only)

∗ 0.5 MPa supply

F.O.F. ∗ 40 N
T.T. 45°

Foot pedal
VM220-02-40 3-6.5
VM230-02-40 (Mounting hole)

JIS Symbol
2 port

5 port

∗ 0.5 MPa supply

F.O.F. ∗ 65 N
T.T. 1.2°

5-6-25
 3 Port Mechanical Valve

Series VM400
Either N.C. or N.O. is available. Specifications
Fluid Air/Inert gas
Piping possible to any port. Operating pressure –100 kPa to 1.0 MPa
Proper countermeasures can be taken Ambient and fluid temperature –5 to 60°C (No freezing)
for applications in which the noise of the Effective area 7 mm2
exhaust could cause problems to the Lubrication Not required (Use turbine oil Class 1 ISO VG32, if lubricated)
surroundings. Port size 18
Weight (Basic) 110 g

Model
Actuator
Actuator Model Application
part no.
Basic VM430-01-00 — —
VM430-01-01 VM-01A Polyacetal roller
Mechanical operation

Roller lever
VM430-01-01S VM-01AS Hard steel roller
VM430-01-02 VM-02A Polyacetal roller
One way roller lever
VM430-01-02S VM-02AS Hard steel roller
Straight plunger VM430-01-05 VM-05A —
VM430-01-06 VM-06A Polyacetal roller
Roller plunger
VM430-01-06S VM-06AS Hard steel roller
VM430-01-07 VM-07A Polyacetal roller
Cross roller plunger
VM430-01-07S VM-07AS Hard steel roller
Toggle lever VM430-01-08 VM-08A —
VM430-01-30R VM-30AR Red
VM430-01-30B VM-30AB Black
Push button (Mushroom)
VM430-01-30G VM-30AG Green
VM430-01-30Y VM-30AY Yellow
Manual operation

VM430-01-32R VM-32AR Red

VM430-01-32B VM-32AB Black
Push button (Extended)
VM430-01-32G VM-32AG Green
VM430-01-32Y VM-32AY Yellow
Push button (Flush) VM430-01-33 VM-33A With a set of red,
black, green, yellow

VM430-01-34R VM-34AR Red

VM430-01-34B VM-34AB Black
Twist selector (2 position)
VM430-01-34G VM-34AG Green
VM430-01-34Y VM-34AY Yellow
Key selector (2 position) VM430-01-36 VM-36A —
Note 1) Actuator replacement is available for all types.
Note 2) For push button (mushroom), push button (extended), push button (flush) and a single
unit of fastening ring, refer to pages 5-6-6 to 5-6-7. The other parts are not replace-
able.
Note 3) The handle of the selector (2 position) cannot be removed or replaced alone.

5-6-26
 3 Port Mechanical Valve Series VM400
How to Order

VM4 3 0 01 01 S
Suffix for actuator
Actuator type S Hard steel roller
Port size 00 Basic R Red
01 Rc 1 8 01 Roller lever Color of
B Black
N01 NPT 1 8 push button
02 One way roller lever G Green selector
F01 G18 05 Straight plunger Y Yellow
S
A
06 Roller plunger
07 Cross roller plunger V
A
Number of ports 08 Toggle lever
3 3 port 30 Push button (Mushroom) S
A
32 Push button (Extended)
33 Push button (Flush)
34 Twist selector (2 position)
V
A
36 Key selector (2 position)
VM
Construction VR
Non-actuated Actuated
VH
Force
VHS

Component Parts
No. Description Material Note No. Description Material Note
q Body ADC Metallic plated t Over travel spring Stainless steel
w Plunger POM y Retainer Brass
e Upper lid Brass Black zinc chromated u Spring Stainless steel
r Spool valve Aluminum alloy Rubber lined i Spring Stainless steel

5-6-27
Series VM400
Series VM400
Basic JIS Symbol
VM430-01-00 Actuator mounting hole

F.O.F. 26 N
4-4.5 P.T. 1.5 mm
mounting hole
O.T. 2.0 mm
T.T. 3.5 mm

Roller lever JIS Symbol

VM430-01-01 ø17 polyacetal or hard steel roller
VM430-01-01S

F.O.F. 12 N
P.T. 4.0 mm
4-4.5 O.T. 4.5 mm
mounting hole
T.T. 8.5 mm

One way roller lever JIS Symbol

ø17 polyacetal or hard steel roller
VM430-01-02
VM430-01-02S

F.O.F. 11 N
P.T. 4.0 mm
4-4.5
mounting hole O.T. 5.0 mm
T.T. 9.0 mm

Straight plunger Panel mounting hole

VM430-01-05
Hexagon nut thick 6,
across flats 27

JIS Symbol

F.O.F. 30 N
4-4.5 P.T. 3.5 mm
mounting hole
O.T. 2.0 mm
T.T. 5.5 mm

5-6-28
 3 Port Mechanical Valve Series VM400
Series VM400
Roller plunger ø17 polyacetal or hard steel roller
Panel mounting hole
VM430-01-06
VM430-01-06S
Hexagon nut thick 6,
across flats 27

JIS Symbol

S
A
V
A
F.O.F. 30 N
4-4.5 P.T. 3.5 mm
S
A
mounting hole
O.T. 2.0 mm
T.T. 5.5 mm V
A
Cross roller plunger ø17 Polyacetal or hard steel roller Panel mounting hole
VM
VM430-01-07
VM430-01-07S Hexagon nut thick 6,
across flats 27
VR
VH
JIS Symbol
VHS

F.O.F. 30 N
4-4.5 P.T. 3.5 mm
mounting hole O.T. 2.0 mm
T.T. 5.5 mm
T.T. (Total Travel) 60° Panel mounting hole
Toggle lever
VM430-01-08
Hexagon nut thick 6,
across flats 27

JIS Symbol

4-4.5
mounting hole F.O.F. 7N
T.T. 60°

Push button (Mushroom) Panel mounting hole

VM430-01-30R/B/G/Y

JIS Symbol

F.O.F. 26 N
4-4.5 P.T. 4.6 mm
mounting hole O.T. 1.6 mm
T.T. 6.5 mm

5-6-29
Series VM400
Series VM400
Push button (Extended) Panel mounting hole
VM430-01-32R/B/G/Y

JIS Symbol

4-4.5 F.O.F. 26 N
mounting hole P.T. 5.4 mm
O.T. 1.6 mm
T.T. 6.5 mm

Push button (Flush) Panel mounting hole

VM430-01-33

JIS Symbol

4-4.5 F.O.F. 26 N
mounting hole P.T. 4.9 mm
O.T. 1.6 mm
T.T. 6.5 mm

Twist selector (2 position) Panel mounting hole

VM430-01-34R/B/G/Y

JIS Symbol

4-4.5
mounting hole
F.O.F. 20 N
T.T. 90°

5-6-30
 3 Port Mechanical Valve Series VM400
Series VM400
Key selector (2 position) Panel mounting hole
VM430-01-36

S
A

JIS Symbol
V
A
S
A
V
A
VM
VR
VH
4-4.5 mounting hole

Key can be removed at the “on” and “off” positions.

F.O.F. 20 N VHS
T.T. 90°

5-6-31
 3 Port Mechanical Valve: Heavy Duty Type

Series VM800
Sturdy construction. Specifications
Fluid Air/Inert gas
Either N.C. or N.O. is available. Operating pressure –100 kPa to 1.0 MPa
Piping possible to any port. Ambient and fluid temperature –5 to 60°C (No freezing)
Proper countermeasures can be taken for Effective area 6 mm2
applications in which the noise of the Lubrication Not required (Use turbine oil Class 1 ISO VG32, if lubricated.)
Port size 18
exhaust could cause problems to the
Weight (Basic) 180 g
surroundings.
Many actuator positions and
Model
orientation options. Actuator Model Actuator part no.
Basic VM830-01-00 —
Roller lever VM830-01-01 VM-01F
Adjustable roller lever VM830-01-13 VM-13F
Adjustable rod lever VM830-01-14 VM-14F
Actuator replacement is available.

How to Order

VM8 3 0 01 01

Actuator type
Port size 00 Basic
01 Rc 1 8 01 Roller lever
N01 NPT 1 8 13 Adjustable roller lever
F01 G18 14 Adjustable rod lever
Number of ports
3 3 port

Application
 Movement is changeable.  Roller can be mounted to inside of lever.

Actuated Actuated Free travel Actuated Actuated Free travel

Stepped plunger Loosen the

Loosen the
hexagon socket hexagon socket
head cap screw head cap screw
to reverse lever. to reverse lever.

Standard movements

 Lever location can be changed.  Head direction can be changed.  Lever length adjustment.

Loosen the hexagon

socket head cap screw
to adjust rod length.
It can be operated
by bending the
rod. In this case,
Loosen the hexagon Loosen the hexagon make sure that the
socket head cap screw to socket head cap screw minimum bending
adjust through 360°. to adjust the lever. radius of the rod is
10R or more.

5-6-32
 3 Port Mechanical Valve: Heavy Duty Type Series VM800
Construction
Non-actuated Actuated
Force

S
A
V
A
S
A
V
A
VM
VR
VH
VHS
Component Parts
No. Description Material Note No. Description Material Note
q Body ADC Metallic plated r Over travel spring Stainless steel
w Plunger POM t Retainer Brass
e Spool valve Aluminum alloy, NBR Rubber lined y Spring Steel Zinc chromated

Series VM800
Basic
VM830-01-00
JIS Symbol
Actuator mounting hole
P.T. (Pre-Travel) 1
O.T. (Over Travel) 2
T.T. (Total Travel) 3

4-5.1 mounting hole

Thread depth 15

F.O.F. 23 N
P.T. 1.0 mm
O.T. 2.0 mm
T.T. 3.0 mm

5-6-33
Series VM800
Series VM800
Roller lever
VM830-01-01
JIS Symbol
Stainless sintered roller

4-5.1
mounting hole

Hexagon socket head cap screw

4-M6 x 1 depth 15

F.O.F. 20 N
P.T. 20°
O.T. 30°
T.T. 50°

Adjustable roller lever

VM830-01-13
JIS Symbol
Black nylon roller
gth
len
to 8 ent
26 justm
9
Ad

Hexagon socket
head cap screw

Depth 15
∗ At lever length 38.1 mm
F.O.F. ∗ 20 N
4-5.1
mounting hole P.T. 20°
O.T. 30°
T.T. 50°

Adjustable rod lever

VM830-01-14
JIS Symbol
ø3.2 stainless rod
MAX. 141.2

Hexagon socket
head set screw

Hexagon socket
head cap screw

Depth 15
∗ At lever length 141.2 mm
F.O.F. ∗ 2.3 N
4-5.1 P.T. 20°
mounting hole
O.T. 30°
T.T. 50°

5-6-34