5/21/24, 12:12 PM 7206 BEGAJ - Angular contact ball bearings | SKF
Image may differ from product. See technical specification for details.
7206 BEGAJ
Single row angular contact ball bearing
These single row angular contact ball bearings can accommodate radial and axial loads
acting simultaneously, where the axial load acts in one direction only. They can operate at
high speeds and, depending on the variant, even very high speeds. They are more suitable
than deep groove ball bearings for supporting large axial forces acting in one direction.
High-speed capability
Accommodate relatively high radial loads and large unilateral axial loads
https://www.skf.com/ph/products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings/productid-7206 … 1/6
5/21/24, 12:12 PM 7206 BEGAJ - Angular contact ball bearings | SKF
Overview
Dimensions
Bore diameter 30 mm
Outside diameter 62 mm
Width 16 mm
Contact angle 40 °
Performance
Basic dynamic load rating 24 kN
Basic static load rating 15.6 kN
Reference speed 14 000 r/min
Limiting speed 14 000 r/min
SKF performance class SKF Explorer
Properties
Contact type Normal contact (two-point contact)
Number of rows 1
Locating feature, bearing outer ring None
Ring type One-piece inner and outer rings
Cage Steel sheet metal
Matched arrangement No
Universal matching bearing Yes
Axial internal clearance Not applicable
Matched condition (axial clearance/ preload) Light preload
Tolerance class Class P6 (P6)
Material, bearing Bearing steel
Coating Without
Sealing Without
Lubricant None
Relubrication feature Without
Logistics
Product net weight 0.195 kg
eClass code 23-05-08-03
UNSPSC code 31171531
https://www.skf.com/ph/products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings/productid-7206 … 2/6
5/21/24, 12:12 PM 7206 BEGAJ - Angular contact ball bearings | SKF
Technical specification
Dimensions
d 30 mm Bore diameter
D 62 mm Outside diameter
B 16 mm Width
d1 ≈ 42.65 mm Shoulder diameter of inner ring (large side face)
d2 ≈ 36.13 mm Shoulder diameter of inner ring (small side face)
D1 ≈ 50.1 mm Shoulder diameter of outer ring (large side face)
a 27.3 mm Distance side face to pressure point
r1,2 min. 1 mm Chamfer dimension
r3,4 min. 0.6 mm Chamfer dimension
Abutment dimensions
da min. 35.6 mm Diameter of shaft abutment
Da max. 56.4 mm Abutment diameter housing
Db max. 57.8 mm Diameter of housing abutment
ra max. 1 mm Radius of fillet
rb max. 0.6 mm Radius of fillet
Calculation data
SKF performance class SKF Explorer
Basic dynamic load rating C 24 kN
Basic static load rating C0 15.6 kN
Fatigue load limit Pu 0.655 kN
Reference speed 14 000 r/min
Limiting speed 14 000 r/min
Minimum axial load factor A 0.00377
Minimum radial load factor kr 0.095
Limiting value e 1.14
https://www.skf.com/ph/products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings/productid-7206 … 3/6
5/21/24, 12:12 PM 7206 BEGAJ - Angular contact ball bearings | SKF
S I N G L E B E A R I N G O R B E A R I N G P A I R A R R A N G E D I N TA N D E M
Calculation factor (single, tandem) X 0.35
Calculation factor (single, tandem) Y0 0.26
Calculation factor (single, tandem) Y2 0.57
B E A R I N G P A I R A R R A N G E D B A C K-T O - B A C K O R FA C E -T O - FA C E
Calculation factor (back-to-back, face-to-face) X 0.57
Calculation factor (back-to-back, face-to-face) Y0 0.52
Calculation factor (back-to-back, face-to-face) Y1 0.55
Calculation factor (back-to-back, face-to-face) Y2 0.93
https://www.skf.com/ph/products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings/productid-7206 … 4/6
5/21/24, 12:12 PM 7206 BEGAJ - Angular contact ball bearings | SKF
More Information
d Product details b Engineering information { Tools
Designs and variants Principles of rolling bearing selection SKF Product select
General bearing specifications General bearing knowledge SimPro Quick
Loads Bearing selection process Bearing Frequency Calculator
Temperature limits Bearing interfaces LubeSelect for SKF greases
Permissible speed Seat tolerances for standard conditions Heater selection tool
Design considerations Selecting internal clearance or preload Rolling bearings mounting and dismounting instructions
Designation system Lubrication
Sealing, mounting and dismounting
Bearing failure and how to prevent it
https://www.skf.com/ph/products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings/productid-7206 … 5/6
5/21/24, 12:12 PM 7206 BEGAJ - Angular contact ball bearings | SKF
Terms of use
By accessing and using this website / app owned and published by AB SKF (publ.) (556007-3495 · Gothenburg) (“SKF”), you agree to the following terms and conditions:
Warranty Disclaimer and Limitation of Liability
Although every care has been taken to assure the accuracy of the information on this website / app, SKF provides this information "AS IS" and DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. You acknowledge that your use of this website / app is at your sole risk, that you assume full responsibility for all costs
associated with use of this website / app, and that SKF shall not be liable for any direct, incidental, consequential, or indirect damages of any kind arising out of your access to, or use of the information or software made
available on this website / app.
Any warranties and representations in this website / app for SKF products or services that you purchase or use will be subject to the agreed upon terms and conditions in the contract for such product or service.
Further, for non-SKF websites / apps that are referenced in our website / app or where a hyperlink appears, SKF makes no warranties concerning the accuracy or reliability of the information in these websites / apps and
assumes no responsibility for material created or published by third parties contained therein. In addition, SKF does not warrant that this website / app or these other linked websites / apps are free from viruses or other
harmful elements.
Third Party Services
When viewing YouTube content via the SKF website(s) (i.e. using YouTube API Services), you agree to be bound by the YouTube Terms of Service.
Copyright
Copyright in this website / app copyright of the information and software made available on this website / app rest with SKF or its licensors. All rights are reserved. All licensed material will reference the licensor that has
granted SKF the right to use the material. The information and software made available on this website / app may not be reproduced, duplicated, copied, transferred, distributed, stored, modified, downloaded or otherwise
exploited for any commercial use without the prior written approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals without prior written approval of SKF. Under no circumstances may
this information or software be supplied to third parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Trademarks and Patents
All trademarks, brand names, and corporate logos displayed on the website / app are the property of SKF or its licensors, and may not be used in any way without prior written approval by SKF. All licensed trademarks
published on this website / app reference the licensor that has granted SKF the right to use the trademark. Access to this website / app does not grant to the user any license under any patents owned by or licensed to SKF.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.
https://www.skf.com/ph/products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings/productid-7206 … 6/6
