Better-to-Know

Assalam-o-alikum!
This is Dr. Eerie, a student at VU, holds many certifications in the domain of cybersecurity & networking,
intermediate in Python3, founder of “De Technocrats” etc. This’s what I heard about myself from people
around me ;)

Anyways I compiled this PDF because I noticed that there are no officially provided notes from VU for
CS601. But there’s a reading section after every lecture. So, I compiled it by copying & pasting that
reading section stuff including pics. I hope that this will save student time during learning as well as it’ll
save them from headache during exams’ seasons which they used to get due to leaping around the
whole lecture sections on VULMS in exams season to revise the course content in a short period of time.

I didn’t not only copy and paste the whole lectures to compile these notes, but also rectified some
structural errors that were in reading section there.
Also added some extra point(s) under the heading of FYI (i.e. For Your Information), these points would
be helpful to students and VU as well !!

NOTE:
There’s no copyright infringement intended. All the stuff that I copied & pasted here belongs to VU
CS601 reading sections and VU is the institute who deserves the credit for this.

I just invested my time in compiling these notes for pubic (students) welfare. If you find these notes
helpful so you can appreciate it via joining me at De Technocrats on YouTube , GitHub , Telegram (use
VPN because telegram is banned in Pakistan). There you’ll find more exclusive free educational stuff
related to computer sciences in PDF, video, audio, and other formats.

You can contact me (I may slow to respond or may not be able to do so):
There’s a WhatsApp number is YouTube channel description. Or Telegram contact is my personal GitHub
profile.

Regards
Wishing you the best for your studies
 Lecture # 1
Welcome to the exciting world of Data Communication. This foundational course has been carefully
designed to equip undergraduate students with a broad comprehension of the essential principles and
techniques that serve as the foundation for contemporary communication systems. Today's world is
characterized by rapid technological advancements, and proficiency in transmitting, receiving, and
exchanging data effectively and securely holds the utmost significance. This course is an entry point for
students to delve into the complex system of technologies and protocols that provide uninterrupted
communication on a global scale.

During this course, students will explore the fundamental principles of data communication, covering the
ideas of data transfer, networking technologies, and internet protocols. Students will acquire knowledge
and understanding of the essential hardware and software components that constitute the foundational
infrastructure of contemporary communication networks. By learning a foundational grasp of data
encoding and delving into advanced subjects like network security and wireless communication, students
will develop the requisite knowledge and abilities, to effectively traverse the intricate nature of the digital
communication domain.

FYI: This lecture is just an introduction to the course. Nothing special to learn here.

Lecture # 2
Communication: Sharing of Information (Local or remote).

Telecommunications: Communication at a Distance (includes telephony, telegraph, and television etc.)

Data communications: Exchange of data between two devices via some form of transmission media.
 Lecture # 3
Effectiveness of a Data Communication System:

The effectiveness of a Data Communication System depends on the following factors:

• Delivery:

When data is sent from one place to another correctly and successfully, this is called delivery.

• Accuracy:

When data is sent, it must be accurate, which means that there must be no errors.

• Timeliness:

For data to be considered timely, it must be sent within a reasonable amount of time.

• Jitter:

The difference in packet arrival times in a network, which affects how consistently data is sent at
regular intervals, is called jitter.

Lecture # 4

FYI: This lecture covers the same reading content as of previous lecture i.e. lecture # 3, but only includes
this extra picture.
 Lecture # 5
A data communications system has five components:

• Sender
• Receiver
• Transmission medium
• Protocol
• Message

Lecture # 6
Following are the different forms of Information.

• Text
• Numbers
• Images
• Audio
• Video

Data Flow between two devices in the following modes:

Simplex: In simple terms, simplex is like talking on a one-way street. While in simplex mode, data can
only go from one device to another. The device that receives the data cannot send it back. Like a TV
remote control, you can tell it what to do (like changing stations), but it doesn't get any information from
the TV.

Half Duplex: It is like talking on a walkie-talkie. Data can be sent and received in this mode, but not at
the same time. Like switching places in a chat. People listen to each other when they talk and talk to each
other when they listen. Changing between sending and getting is possible, but not both at the same time.

Full Duplex: Communication that works both ways is like a normal phone call. There is time for both
people to talk and listen. Like having a street that goes both ways, data can flow in both directions at the
same time. This is like how we talk to each other in real life—we can both talk and listen at the same
time, which makes dialogue smooth and natural.

Lecture # 7
• Network: Interconnection of a set of devices capable of communication

• Host: In computer networks, a host is any device that is connected to the network, like a
computer or printer. Each host has its own unique IP address, which lets other devices on the
network talk to each other and share data.

• Connecting Device: In networks, a connecting device is either hardware or software that lets
devices talk to each other by controlling network traffic and managing data transfers easier.
A network must be able to meet a certain number of criteria such as:
 • Performance
• Reliability
• Security

Lecture # 8
Physical Network Attributes:

• Link: It refers to a way for two or more devices to talk to each other or a connection that lets
them share info. Different types of media, like wired (like Ethernet cables and fiber-optic lines) or
wireless (like Wi-Fi and Bluetooth) technologies, can be used to make links.

• Type of Connection
o Point-to-Point

In networking, point-to-point connections let two devices talk to each other directly over
a fixed link, making it easy for them to share data.

o Multipoint

Multipoint links, on the other hand, let more than two devices share the same
communication link, though they do have to compete for the available bandwidth. This
lets more than two devices talk to each other over a shared network.

Lecture # 9
Physical Topologies

• Links + Nodes = Topology

• Topology: Physical Layout of Network
• Physical Topologies:
o Mesh: A network setup where each device is connected to every other device
through individual point-to-point links.
o Star: In a star network topology, every device is connected through a dedicated
point-to-point link solely to a central controller, often referred to as a hub.
o Bus: A single extended cable serves as a backbone to connect all devices within
a network in a multipoint configuration.
o Ring: Every device maintains an exclusive point-to-point link with only the two
neighboring devices on either side of it.

Physical Topologies
Me
sh
To
pol
ogy
:

A
net
work setup where each device is connected to every other device through individual point-to-
point links.

Lecture # 10

FYI: It contains the above pics and the below one:

Star Topology:

In a star network topology, every device is connected through a dedicated point-to-point link
solely to a central controller, often referred to as a hub.
 Lecture # 11
Physical Topologies

Bus Topology:

A single extended cable serves as a backbone to connect all devices within a network in a
multipoint configuration.

Ring Topology:

Every device maintains an exclusive point-to-point link with only the two neighboring devices
on either side of it.
 Lecture # 12
Network Types

Network classification:

Networks can be classified in various ways based on different criteria.

• Size
• Geographical Coverage
• Ownership

Local Area Networks

• Usually Privately owned.

• Connects some hosts in a single office, building, or campus.
• Can be as simple as two PCs and a printer in someone’s home office
• Can extend throughout a company
• Host Address
 Lecture # 13
Wide Area Network

• Wider geographical span than a LAN

• Spans a town, a state, a country, or even the world
• Interconnects connecting devices such as switches, routers, or modems
• Normally created and run by communication companies
• Point-to-Point WAN
• Switched WAN
• Internetwork

Point-to-Point WANs:

A Point-to-Point Wide Area Network (WAN) is a type of network connection that establishes a
direct link or communication path between two specific locations or endpoints.

Switched WANs:

A switched WAN typically refers to a Wide Area Network (WAN) that utilizes switching
technology for data transmission

Internetwork:

is a network that connects multiple individual networks or subnetworks together, allowing them
to communicate and share information across a larger, interconnected system.
 Lecture # 14
Switching

o Circuit-Switched Network: A dedicated link, referred to as a circuit, remains

constantly established between the two end systems, while the switch can solely
control its activation or deactivation.
o Packet- Switched Network: A packet-switched network is a type of data
communication network in which digital data is divided into small packets for
transmission.

Circuit Switched Network:

A circuit-switched network is a type of telecommunication network in which a dedicated

communication path or circuit is established between two devices for the duration of their

conversation.

Packet Switched Network:

A packet-switched network is a type of data communication network that transmits digital

information in discrete packets of data.
 Lecture # 15
The Internet

• An internet (note the lowercase i) is two or more networks that can communicate with
each other
• The Internet (uppercase I ), and is composed of thousands of interconnected networks.
• Accessing the Internet

Lecture # 16
Internet History

• Telegraph and Telephone networks, before 1960: Constant-rate communication only

• ARPANET: short for Advanced Research Projects Agency Network, was one of the
earliest and most significant computer networks that laid the foundation for the
development of the modern internet.
• MILNET: short for Military Network, was a computer network used by the United States
Department of Defense (DoD) in the 1980s.
• CSNET: short for Computer Science Network, was a computer network that played a
significant role in the early development of the internet.
• NSFNET: The National Science Foundation Network, commonly known as NSFNET,
was a pivotal computer network that played a crucial role in the development and
expansion of the internet in the United States.
 Lecture # 17
Internet Standards and Administration

• Internet draft: An Internet draft is a provisional document, still under development, and
lacking official status, typically having a lifespan of approximately six months.
• Request for Comments (RFC): Based on guidance from internet authorities, a draft could be
released as a Request for Comment (RFC).
o Proposed Standard
o Draft Standard
o Internet Standard
o Historic
o Experimental
o Informational

Internet Standards

Internet Administration
 Lecture # 18
Protocol Layering - Introduction

Protocol

Rules that both the sender and receiver and all intermediate devices need to follow to be able to
communicate effectively.

Protocol Layering

Simple Communication: Exchange of information between two or more individuals or entities

using straightforward and easily understood language or methods. We may need only one simple
protocol.

Complex Communication: The task is divided between different layers, in that case we need a
protocol at each layer, or protocol layering.

Protocol Layering - Example Scenario 1

In the picture below, communication between Maria and Ann takes place in one layer, face to
face, in the same
language.

Lecture # 19
Protocol Layering - Example Scenario 2

In the below scenario, Maria and Ann are using encryption/decryption technique so their ideas
do not disclose to other people
 Lecture # 20
Protocol Layering - Advantages and Disadvantages

Advantages

o Modularity
o Separation of Service & Implementation
o Reduced Complexity & Cost

Disadvantages

o Complexity: Layering introduces multiple protocols, each responsible for a

specific function or task.
o Overhead: Each layer adds overhead in the form of headers, trailers, and
additional processing.

Lecture # 21
Protocol Layering - Principles

o Bidirectional Communication → Each Layer performs two opposite tasks in each

direction.
o Two objects under each layer at both sites should be identical.

Protocol Layering - Logical Connections

Logical Connections

o Imaginary connection between each layer

Protocol Layering

Now Maria and Ann can imagine that there is a logical connection at each layer through which
they can send
their data
created from
that layer.
 Lecture # 22
TCP/IP Protocol Suite

TCP/IP Protocol Suite

o Protocol suite used on the Internet today.

o Each Layer provides specific functionality.
o Transmission Control Protocol/Internet Protocol (TCP/IP) is a hierarchical
protocol suite used for data communication in computer networks.
o Presented in 1973 and chosen to be the official protocol of Internet in 1983

TCP/IP Protocol Suite - Layered Architecture

• In the below figure, let us assume that computer A communicates with computer B.
• Both hosts participate in all five layers of the communication process.
• The router is involved in only three layers, there is no transport or application layer in a
router as the router is used only for routing.
• A link-layer switch is involved only in two layers, datalink and physical.
 Lecture # 23
The following diagram shows the Logical Connections between TCP/IP Layers.

Now the other figure shows the identical objects of each layer:
For example,
Application layers exchanges the identical objects as “messages” and Physical layers as “bits”.

Lecture # 24
The following figure shows the protocols and the objects used in Layer 3-5.

• HTTP, SMTP and FTP protocols are used in Application layer

• TCP and UDP in Transport layer
• IP protocol in Network layer
 Lecture # 25
The following figure shows the protocols and the objects used in Layer 3-5.

• HTTP, SMTP and FTP protocols are used in Application layer

• TCP and UDP in Transport layer
• IP protocol in Network layer

Lecture # 26
Encapsulation is the process of enclosing data from higher network levels with headers from lower
layers to facilitate transmission, similar to placing a letter inside an envelope.

Decapsulation refers to the procedure of unsealing the envelope, eliminating the headers, and gaining
access to the initial data upon reception. These operations guarantee the appropriate encapsulation and
decapsulation of data as it traverses various network layers.
The following shows the addressing done at each layer:
 Lecture # 27
The number and layers are both different in TCP/IP protocol suite as compared with OSI
model.

The following figure clearly depicts the difference:

There are several reasons OSI did not replace TCP/IP, three of them are mentioned below:

• OSI was completed when TCP/IP was fully in place

• Some layers in OSI not fully defined
• Performance of TCP/IP better than that of OSI
 Lecture # 28
We will discuss the bottom two layers i.e. the Physical and Datalink layers in our course.

The following topics in these two layers will be covered:

• Analog & Digital Transmission

• Transmission Media
• Switching
• Error Detection and Correction
• Media Access and Data Link Control
• Wired and Wireless LANs
 Lecture # 29
The following figure shows the layers involved in the communication between two users i.e. Alice and
Bob.

The data signals can take two forms: Digital and Analog

Digital Data:
Digital data is information that is stored in a precise numerical form, most often in the binary system,
where data is stored as groups of 0s and 1s. In a digital representation, each number (bit) stands for a
different piece of data. Digital data is accurate, simple to change, and can be sent, saved, and processed
quickly by computers and other electronic systems. Noise and degradation are less likely to happen during
transfer, so it can be used for long-term storage and accurate communication.

Analogue Data:
On the other hand, analogue data uses constant signals to show information. Within a certain time frame,
these signals can have a lot of different meanings. Natural sounds, human voices, and temperatures in the
surroundings are all examples of analogue data. An analogue signal is different from digital signals
because it is constant and could have any value within a certain range. In audio and video signals, for
example, analogue signals are used when the information they carry changes smoothly and constantly.
During transfer and conversion, noise and degradation can happen to analogue data.
 Lecture # 30
Analog Signal:
A continuous, smooth waveform that uses an infinite range of values to describe information is called an
analogue signal. Like nature’s sounds or changes in temperature, it changes all the time.

Digital Signal:
A digital output only has a limited number of values, which are usually shown as 0s and 1s. In computers
and other modern electronics, digital signals are used to reliably and accurately send and store data.

Lecture # 31
Periodic analogue signals:
Periodic analogue signals are signals that exhibit a recurring pattern within a defined time frame. They
demonstrate consistent and repetitive behaviour, which allows for easy analysis within the field of signal
processing.

Let's look at a simple periodic analogue signal, specifically a sine wave.

A simple periodic analog signal, visualized as a sine wave, displays a consistent rhythmic motion at
regular intervals. Sine waves are fundamental in explaining natural phenomena like sound waves and
electrical currents. They have a singular frequency and amplitude, making them vital in signal processing
and mathematics.

Composite Periodic Analog Signal:

A composite periodic analog signal is complex, composed of multiple sine waves with different
frequencies and amplitudes. These waves combine to form intricate waveforms, representing complex
real-world signals like music or speech. Professionals use this breakdown method in fields like
telecommunications and audio engineering for effective analysis and manipulation.

Lecture # 32
Frequency refers to the number of cycles that a wave completes within a given time period, usually
measured in Hertz (Hz). It determines various characteristics, such as pitch in sound waves and colour in
light waves.
The formula for frequency (f) is:
𝑓 = 1/𝑡
Where:

• f represents the frequency in Hertz (Hz).

• t represents the period of the wave, which is the time it takes to complete one full cycle,
measured in seconds (s).
 Lecture # 33
Examples (FYI: Numerical problem) of frequency calculation:

The power we use at home has a frequency of 60 Hz. The period of this sine wave can be
determined as follows:

The period (TT) of a wave is the reciprocal of its frequency (ff). In this case, where the
frequency is 60 Hz, the period can be calculated using the formula:

𝑇 = 1/𝑓

Substituting the given frequency:

T=1/60 Hz

T=0.0166 seconds or 16.66 msec

Lecture # 34
Phase or Phase Shift refers to the position of a point on a waveform in relation to a reference point,
usually measured in degrees or radians. This is an important concept in signal processing and
telecommunications, as it helps with wave synchronization and alignment.

Formula:
 Lecture # 35
Wavelength is another characteristic of a signal traveling through a transmission medium. Wavelength
binds the period or the frequency of a simple sine wave to the propagation speed of the medium.

The formula for wavelength (λ) is:

𝛌 = 𝐟𝛎
Where:

• λ is the wavelength in meters (m).

• v is the velocity of the wave in meters per second (m/s).
• f is the frequency of the wave in Hertz (Hz).

Lecture # 36
• A sine wave is comprehensively defined by its amplitude, frequency, and phase.
• We have been showing a sine wave by using what is called a time domain plot.
• The time-domain plot shows changes in signal amplitude with respect to time (it is an amplitude-
versus-time plot).
• Phase is not explicitly shown on a time-domain plot.
The frequency domain is more compact and useful when we are dealing with more than one sine wave.
For example, Figure 3.9 shows three sine waves, each with different amplitude and frequency. All can be
represented by three spikes in the frequency domain.
 • Lecture # 37
Single Sine Wave can only carry limited information
• Composite Signal is made up of multiple simple sine waves
• Can be periodic or non-periodic

Following figure shows the decomposition of composite periodic signal:

Lecture # 38
A communication channel or network's bandwidth is its frequency range. It is the difference between the
higher and lower frequencies in a continuous band, measured in Hertz.

In radio transmission, a channel's bandwidth determines its frequency range. In signal processing, a wide
bandwidth transmits more data but uses more resources. Thus, understanding bandwidth is crucial to
optimising communication systems to ensure the channel or network can handle data transmission
frequencies.

Bandwidth can be used in two different contexts with two different measuring values:
 o Bandwidth in Hertz
o Bandwidth in bits per second

Bandwidth of a composite signal:

B = f h – fl

B = 5000 – 1000

B = 4000 Hz
 Lecture # 39
In addition to being represented by an analog signal, information can also be represented by a digital
signal. For example, a 1 can be encoded as a positive voltage and a 0 as zero voltage. A digital signal can
have more than two levels.

Information can also be represented by a digital signal

• For example, a 1 can be encoded as a positive voltage and a 0 as zero voltage

• A digital signal can have more than two levels so that we can send more than one bit for each
level

In general, if a signal has L levels, each level needs log2 L bits. So, we can send log2 2 = 1 bit per level

log2 4 = 2 bits
 Lecture # 40
(FYI: Numerical problems) Example:

1) A digital signal has eight levels. How many bits are needed per level?

Number of bits per level:

Log2 L

Log2 (8)

=3 ANSWER

Hence 3 bits are needed per level.

2) A digital signal has nine levels. How many bits are needed per level? We calculate the number of
bits by using the formula.

We calculate the number of bits by using the formula. Each signal level is represented by 3.17 bits.
However, this answer is not realistic. The number of bits sent per level needs to be an integer as well as a
power of 2. For this example, 4 bits can represent one level.

Lecture # 41
Bit Rate

• Number of bits sent in 1 second.

• Bit Rate is expressed in bits per second (bps)
• Most digital signals are non-periodic, and thus period and frequency are not appropriate
characteristics.
Bit Rate
Most digital signals are nonperiodic, and thus period and frequency are not appropriate
characteristics. Another term—bit rate (instead of frequency)—is used to describe digital signals.
The bit rate is the number of bits sent in 1s, expressed in bits per second (bps). Figure 3.17 shows
the bit rate for two signals.

(FYI: Numerical problem) Example

Assume we need to download text documents at the rate of 100 pages per second. What is the
required bit rate of the channel?
 ANSWER

Example

A digitized voice channel is made by digitizing a 4-kHz bandwidth analog voice signal. We need
to sample the signal at twice the highest frequency (two samples per hertz). We assume that each
sample requires 8 bits. What is the required bit rate?

A page is an average of 24 lines with 80 characters in each line. If we assume that one character
requires 8 bits, the bit rate

Bit Length

We discussed the concept of the wavelength for an analog signal: the distance one cycle occupies
on the transmission medium. We can define something similar for a digital signal: the bit length.
The bit length is the distance one bit occupies on the transmission medium.
 Lecture # 42
Digital Signal as Composite Analog Signal

• Based on Fourier analysis, a digital signal is a composite analog signal

• A digital signal, in the time domain, comprises connected vertical and horizontal line segments.
• A vertical line in the time domain means a frequency of infinity.
• A horizontal line in the time domain means a frequency of zero.
• Going from a frequency of zero to a frequency of infinity implies all frequencies in between are
part of the domain.

Digital Signal as Composite Analog Signal

Vertical line in the time domain: Frequency of infinity Horizontal line in the time domain:
Frequency of zero

Digital Signal as Composite Analog Signal

 Lecture # 43
Transmission of Digital Signals

• Digital signal, periodic or non-periodic, is a composite analog signal with frequencies

between zero and infinity (Infinite Bandwidth)

• Two approaches for transmission:

o Baseband Transmission: Baseband transmission is a method of transmitting
digital signals over a communication medium, such as a cable or a fiber optic line,
in which the entire bandwidth of the medium is used to send a single stream of
data.
o Broadband Transmission: Broadband transmission is a method of sending
multiple signals simultaneously over a communication medium, such as a cable,
fiber optic line, or wireless channel, by dividing the available bandwidth into
multiple frequency channels.

Transmission of Digital Signals

• A vertical line in the time domain means a frequency of infinity

• A horizontal line in the time domain means a frequency of zero.
• Going from a frequency of zero to a frequency of infinity implies all frequencies in
between are part of the domain.

Baseband Transmission

Sending a Digital Signal without changing it to an Analog Signal

Baseband Transmission
Baseband Transmission

Baseband Transmission

Lecture # 44
Broadband Transmission (Modulation)

• Changing the Digital signal to an Analog signal for transmission

• Modulation allows us to use a bandpass channel—a channel with a bandwidth that does
not start from zero
• More available than a low-pass channel

Broadband Transmission (Modulation)

Broadband Transmission (Modulation)

Broadband Transmission (Modulation)

 Lecture # 45
Transmission Impairments

• Transmission media are not perfect

• Cause Signal impairments
• Signal sent is not the same as the signal received

Causes of Transmission Impairment

Transmission Impairment
What is sent is not what is received. Three causes of impairment are attenuation, distortion, and
noise

Transmission Impairment

Signals travel through transmission media, which are not perfect. The imperfection causes signal
impairment. This means that the signal at the beginning of the medium is not the same as the
signal at the end of the medium.

Attenuation

Attenuation means a loss of energy. When a signal, simple or composite, travels through a
medium, it loses some of its energy in overcoming the resistance of the medium. That is why a
wire carrying electric signals gets warm, if not hot, after a while. Some of the electrical energy in
the signal is converted to heat.

To compensate for this loss, amplifiers are used to amplify the signal. Figure 3.27 shows the
effect of attenuation and amplification.

Attenuation and amplification

Example 3.26

Suppose a signal travels through a transmission medium and its power is reduced to one half.
This means that P2 = 0.5 P1. In this case, the attenuation (loss of power) can be calculated as

A loss of 3 dB (−3 dB) is equivalent to losing one-half the power.

Example 3.27

A signal travels through an amplifier, and its power is increased 10 times. This means that P2 =
10P1. In this case, the amplification (gain of power) can be calculated as

Example 3.29

Sometimes the decibel is used to measure signal power in milliwatts. In this case, it is referred to
as dBm and is calculated as dBm = 10 log10 Pm, where Pm is the power in milliwatts. Calculate
the power of a signal if its dBm = −30.

Solution
We can calculate the power in the signal as

Lecture # 46
Attenuation and Amplification - Decibel

• Unit of Signal strength is Decibel or dB

• Decibel (dB) measures the relative strengths of two signals or one signal at two different
points

• Decibel is negative if a signal is attenuated and positive if signal is amplified

Example

Suppose a signal travels through a transmission medium and its power is reduced to one half.
This means that P2 = 0.5 P1. In this case, the attenuation (loss of power) can be calculated as
Example

A signal travels through an amplifier, and its power is increased 10 times. This means that P2 =
10P1. In this case, the amplification (gain of power) can be calculated as

Lecture # 47
Distortion

• Distortion means that the signal changes its form or shape.

• Distortion can occur in a composite signal made of different frequencies.
• Each signal component has its own propagation speed (see the next section) through a
medium and, therefore, its own delay in arriving at the destination.
• Differences in delay may create a difference in phase if the delay is not the same as the
period duration.
 Lecture # 48
Noise

• Noise is another cause of impairment.

• Several types of noise, such as thermal noise, induced noise, crosstalk, and impulse noise,
may corrupt the signal.
• Thermal noise is the random motion of electrons in a wire, which creates an extra signal
not originally sent by the transmitter.
• Induced noise comes from sources such as motors.
• Crosstalk is the effect of one wire on the other.

Noise – Signal to Noise Ratio (SNR)

• Signal to Noise Ratio (SNR) is used to find the theoretical bit rate limit of a signal
Example

The power of a signal is 10 mW and the power of the noise is 1 μW; what are the values of SNR
and SNRdB?

Example
The values of SNR and SNRdB for a noiseless channel are calculated as
 Lecture # 49
Data Rate Limits

• How fast we can send data, in bits per second, over a channel?
• Data Rate depends on 3 factors:
o The Bandwidth available
o The level of the signals we use
o The level of noise

• Two theoretical formulas developed to calculate the data rate:

o one by Nyquist for a noiseless channel
o another by Shannon for a noisy channel

Noiseless Channel: Nyquist Rate

• For a noiseless channel, the Nyquist bit rate formula defines the theoretical maximum bit
rate
• Finding balance between Bit rate and System Reliability

Example

Consider a noiseless channel with a bandwidth of 3000 Hz transmitting a signal with two signal
levels. The maximum bit rate can be calculated as
Example

Consider the same noiseless channel transmitting a signal with four signal levels (for each level,
we send 2 bits). The maximum bit rate can be calculated as

Lecture # 50
Noisy Channel : Shannon Capacity

• We cannot have a noiseless channel; the channel is always noisy

• In 1944, Claude Shannon introduced a formula, to determine the theoretical highest data
rate for a noisy channel:

Example

Consider an extremely noisy channel in which the value of the signal-to-noise ratio is almost
zero. In other words, the noise is so strong that the signal is faint. For this channel the capacity C
is calculated as
Example

Theoretical highest bit rate of a Telephone line with a Bandwidth of 3000 Hz assigned for data
communication. SNR is usually 3162. The capacity is calculated as:

Using Both Limits

• In practice, we need to use both methods to find the limits and signal levels
• Shannon’s formula gives us the upper limit while the Nyquist formula gives us the signal
levels

Example

Consider an extremely noisy channel in which the value of the signal-to-noise ratio is almost
zero. In other words, the noise is so strong that the signal is faint. For this channel the capacity C
is calculated as

This means that the capacity of this channel is zero regardless of the bandwidth. In other words,
we cannot receive any data through this channel.
 Lecture # 51
Network Performance

• Data transmission (in form of Signal) over a network and how the network behaves is
important.
• More important is the performance of the network.

Network Performance

There are 3 characteristics of network performance.

Bandwidth

• An important characteristic that measures Network Performance

• Bandwidth can be used in two different contexts with two different measuring values:
o Bandwidth in Hertz
o Bandwidth in bits per second

Bandwidth

Throughput

• Measure how fast we can send data through a network.

• Bandwidth is not the same as Throughput
• A link may have a bandwidth of B bps, but we can only send T bps through this link with
T always less than B
Example

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute
with each frame carrying an average of 10,000 bits. What is the throughput of this network?

Throughput

The throughput is a measure of how fast we can send data through a network. Although, at
first glance, bandwidth in bits per second and throughput seem the same, they are different. A
link may have a bandwidth of B bps, but we can only send T bps through this link with T
always less than B.

Latency

The latency or delay defines how long it takes for an entire message to completely arrive at
the destination from the time the first bit is sent out from the source.

We can say that latency is made of four components: propagation time, transmission time,
queuing time and processing delay.

Latency = propagation time + transmission time + queuing time + processing delay

Example

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute
with each frame carrying an average of 10,000 bits. What is the throughput of this network?

Solution

We can calculate the throughput as

Throughput = (12,000X10,000)/60 = 2Mbps

The throughput is almost one-fifth of the bandwidth in this case.

 Lecture # 52
Latency or Delay

Latency or delay defines how long it takes for an entire message to completely arrive at the
destination from the time the first bit is sent out from the source

Example

What is the propagation time if the distance between the two points is 12,000 km? Assume
the propagation speed to be 2.4 × 108 m/s in cable.
 Lecture # 53
Delay – Bandwidth Delay Product

• Bandwidth and delay are two performance metrics of a link

• Product of the two, The Bandwidth-Delay Product defines the number of bits that can fill
a link

Bandwidth-Delay Product

Case 1

Case 2

Bandwidth-Delay Product
 We can think about the link between two points as a pipe. The cross section of the pipe
represents the bandwidth, and the length of the pipe represents the delay.

We can say the volume of the pipe defines the bandwidth-delay product, as shown above.

Delay - Jitter

Jitter is a problem if different packets of data encounter different delays and the application
using the data at the receiver site is time-sensitive (audio and video data, for example)

Lecture # 54
When it comes to digital communication, one important process is digital-to-digital conversion. This
process involves converting data from one digital format to another. Understanding this conversion
process is crucial for effectively transmitting digital information across different communication
channels.
There are various methods for converting digital signals to digital format:

• Line coding is a crucial process in which binary data is transformed into digital signals, enabling
smooth transmission over a communication channel. It guarantees seamless coordination between
the sender and receiver.

• Block coding involves the grouping of a set of bits and encoding them into a specific code. This
method improves the integrity of the data and allows for the detection and correction of errors.

• Scrambling is a valuable technique that helps to enhance the efficiency of data transmission by
randomising the data. By doing so, it minimises the chances of having long sequences of identical
bits and optimises the use of the communication channel.

Let's discuss the data and signal elements:

The smallest unit of data representation is a bit. The value can be either 0 or 1, serving as the foundation
for digital information processing and storage.

In digital communication, a signal element refers to the smallest unit of a digital signal. It represents a
particular voltage level or phase change and is utilized to transmit data over a communication channel.
 Lecture # 55
Understanding data and signal rates is essential for optimising efficiency and speed in digital
communication.

The data rate, which is measured in bits per second (bps), represents the quantity of data elements that
are transmitted within a one-second interval. Understanding digital information interchange requires a
grasp of the fundamental building blocks: bits represented by 0s and 1s. A higher data rate enables faster
communication and data transfer by transmitting a larger amount of data in a shorter period of time.

The signal rate, measured in baud, refers to the quantity of signal elements that are transmitted within a
single second. Signal elements consist of pulses, phases, and modulated signals. Signal rate is primarily
concerned with the physical alterations in the signal that transmits the data, rather than the actual content
being transmitted. The signal rate is also known as the pulse or modulation rate.

Lecture # 56
Line coding converts digital data into digital signals, a key digital communication procedure. Computer
memory stores text, numbers, graphics, music, and video as sequences of bits (0s and 1s). Digital
information is built from these bits.

Line coding ensures efficient and reliable data transfer over communication lines.

Line coding schemes:

Following are the 5-line coding schemes:

• Unipolar
• Polar
• Bipolar
• Multilevel
• Multitransition
 Lecture # 57
Line coding schemes:

Following are the 5-line coding schemes:

• Unipolar
• Polar
• Bipolar
• Multilevel
• Multitransition

Unipolar Scheme:

Unipolar line coding involves placing all digital signal levels on one side of the time axis, above or
below. In binary, 1s are represented by a positive or non-zero voltage level, while 0s are zero. Avoiding
signal time axis crossing simplifies signal detection and synchronisation.

For unipolar line coding:

• The positive voltage (+V) is represented by binary 1.

• Binary 0 is zero voltage.

Simple unipolar line coding is easy to implement and decode. Even with several zeros in the data, the
constant positive signal reduces signal power efficiency and transmits power consistently.

Unipolar line coding is employed in short-distance communication systems since it is easy to build and
decode and power efficiency is less important.

In Unipolar NRZ, a binary 1 has a constant voltage level throughout the bit period, while a binary 0 has
no voltage. Unipolar NRZ retains voltage signal polarity for all binary values, unlike other NRZ
methods. However, it only uses positive voltage for binary 1 and zero voltage for binary 0.
 Lecture # 58
Polar-NRZ Line Coding:

Binary 1 has a constant voltage level, positive or negative, during the bit period.

The voltage level of 0 in binary is opposite (negative or positive) throughout the bit period.

In Polar NRZ, the voltage level for a binary 1 remains constant during the bit period, while the voltage
level for a binary 0 remains constant but reversed. The signal is not reset to zero each bit period in this
technique. Instead, it keeps the voltage constant throughout each bit.

The Polar RZ Line Coding Scheme:

In binary, 1 is represented by a positive voltage level in the first half of the bit period and zero value in
the second half.
The binary number 0 is represented by a negative voltage level for half the bit period and zero for the
other half.
Polar RZ signals always revert to zero voltage (or baseline) midway through each bit period, independent
of bit value. This improves synchronisation and reduces issues caused by long sequences of identical
bits, a common concern in non-return-to-zero methods.

Polar NRZ and Polar RZ were separate polar line coding methods. In Polar NRZ, the voltage level
remains constant during the bit period, whether it's 1 or 0. However, Polar RZ voltage returns to zero
halfway through each bit cycle. Consider communication requirements like bandwidth efficiency and
synchronisation while choosing between these systems.
 Lecture # 59
Polar Biphase, also known as Manchester encoding, is a line coding scheme commonly employed in
digital communication. Within this scheme, every bit period is split into two equal intervals. In each bit
period, the polarity of the voltage signal switches back and forth, allowing for regular transitions that help
the sender and receiver stay in sync.

When considering Polar Biphase:

Binary 1 is indicated by a change from a positive voltage level to a negative voltage level (or vice versa)
during the bit period. This transition is commonly known as a 'Manchester transition' or 'Manchester
violation.'

In binary, a 0 is represented when there is no transition within the bit period, which can happen at the
beginning or end of the period.

Polar Biphase encoding possesses the convenient feature of being self-clocking. This means that the
receiver can extract the clock signal directly from the received data stream, thanks to the guaranteed
transition in the middle of each bit period. This property is highly advantageous in preventing
synchronisation errors, making it a popular choice for Ethernet LANs and other digital communication
systems that require precise clock recovery.
 Lecture # 60
AMI/Pseudoternary Bipolar Schemes:

AMI uses zero voltage for binary 0 and positive and negative voltage for binary 1. AMI's 1s alternate
polarity is unique. Code for "1101" is "+0-+". AMI is used in T1 and E1 lines for data transmission and
synchronization.

Digital communication systems encode data using Pseudoternary line coding. Balanced line codes ensure
equal positive and negative voltage levels. Telecoms and networks utilize this coding strategy to send
binary data over a channel. It reduces errors and ensures data transmission and is dependable and
efficient.

Binary 1 has a continuous zero voltage in Pseudoternary, while binary 0 alternates between positive and
negative. AMI has alternating polarities, but Pseudoternary has no voltage change for binary 1s. This
encoding method is used in older telecommunication systems to maintain a balanced distribution of
positive and negative voltage levels for long-distance transmission.

Communication applications often use bipolar systems like AMI and Pseudoternary. These systems
encode binary data with positive, negative, and zero voltage.

Lecture # 61
Block coding converts one amount of bits into more. Often used in digital signal encoding. In mB/nB
encoding,'m' represents the number of bits in the original data block and 'n' represents the encoded block,
which is usually larger.

Reason for Block Coding:

Block coding adds signal redundancy, improving signal reliability. Redundancy adds data. Additional
components aid receiver synchronization, error identification, and correction.

Synchronization requires transmitter and receiver alignment at the start and end of each data block. This
minimizes errors and streamlines data flow. Synchronization is needed to decode the signal and recover
the data.

Benefits of Block Coding:

Block coding includes redundancy to improve data transmission reliability. Redundancy detects and fixes
transmission problems to maintain data integrity.

Efficient Synchronization: Redundant bits help sender-receiver synchronization. Accurate signal

decoding requires correct synchronization.
 Lecture # 62
Using block coding 4B/5B with NRZ-I line coding

In digital communication systems, the utilisation of 4B/5B block coding alongside NRZ-I line coding is a
widely employed technique. This approach is particularly prevalent in high-speed networks and interfaces
like Gigabit Ethernet and Fibre Channel. Now, let's analyse the meaning behind this combination:

In 4B/5B block coding, groups of 4 bits are assigned to distinct 5-bit code words. There are additional
benefits to using this encoding method compared to regular NRZ encoding. It helps maintain a balance
between 1s and 0s and also offers error detection capabilities. This scheme enables a wider variety of
patterns compared to simple NRZ encoding, which enhances the reliability of data transmission.

NRZ-I Line Coding: NRZ-I, also known as Non-Return-to-Zero Inverted, is a line coding technique that
utilises transitions to represent binary 1s and the absence of transitions to represent binary 0s. NRZ-I
operates in a self-clocking manner, eliminating the need for an external clock signal to ensure
synchronisation. On the contrary, it utilises the transitions within the data itself to ensure synchronisation
between the sender and receiver.

4B/5B mapping codes

(FYI: Table on next page.)
 Lecture # 63
Block coding converts one amount of bits into more. Often used in digital signal encoding. In mB/nB
encoding,'m' represents the number of bits in the original data block and 'n' represents the encoded block,
which is usually larger.

8B/10B block encoding is a technique used in data transmission to ensure reliable and efficient
communication.

8B/10B is a block encoding scheme commonly utilised in high-speed digital communication to optimise
data transmission and maintain synchronisation and error detection. In this scheme, 8 bits of data are
assigned to distinct 10-bit code words. This mapping ensures a balanced distribution of 1s and 0s, which
facilitates synchronisation and enhances error-detection capabilities.
 Lecture # 64
Scrambling

Scrambling is a technique used in data communication to improve the reliability of data transmission
and to ensure that the data can be accurately recovered at the receiving end.

• B8ZS and HDB3 are methods of scrambling data to make sure it's sent in a way that prevents
synchronization and data integrity issues, especially over long-distance communication lines.
• Biphase schemes, such as Manchester encoding, are often used for LAN (Local Area Network)
communication due to their advantages in terms of synchronization and low error rates.
• Biphase schemes suitable for LAN but not for Long Distance
• Block Coding + NRZ-I solves synch issue but has DC component.
• Bipolar AMI has a narrow bandwidth (no DC Component) but synch issue (long series of 0s)
• The system needs to insert the required pulses based on the defined scrambling rules.

AMI is used with scrambling.

• In AMI encoding, a 0-bit is represented alternately by a positive voltage (mark) and a negative
voltage (space), while a 1-bit is represented by no voltage change (zero).
• This alternate marking of 0s ensures that there are frequent voltage transitions, which is
important for clock recovery and synchronization.

Types of Scrambling Techniques

Two common scrambling techniques are B8ZS and HDB3

Bipolar with 8-Zero Substitution (B8ZS): B8ZS is a specific method of scrambling. When you have a long
string of consecutive zeros in your data, B8ZS replaces these with a special code to keep the data
balanced and maintain timing. This substitution helps ensure that there are enough transitions in the
data to keep everything synchronized during transmission.

High-density bipolar 3-zero (HDB3): also focuses on keeping the data balanced and ensuring that there
are enough transitions. When there are four consecutive zeros in the data, HDB3 replaces them with a
unique pattern to maintain the balance of ones and zeros in the data, which is crucial for reliable
communication over long distances.
 Lecture # 65
Two cases of B8ZS scrambling technique

• In this technique, eight consecutive zero-level voltages are replaced by the sequence 000VB0VB.
• The V in the sequence denotes violation: this is a nonzero voltage that breaks an AMI rule of
encoding (opposite polarity from the previous).
• The B in the sequence denotes bipolar, which means a nonzero level voltage in accordance with
the AMI rule.

Types of Scrambling Techniques

Two common scrambling techniques are B8ZS and HDB3

Bipolar with 8-Zero Substitution (B8ZS): B8ZS is a specific method of scrambling. When you have a long
string of consecutive zeros in your data, B8ZS replaces these with a special code to keep the data
balanced and maintain timing. This substitution helps ensure that there are enough transitions in the
data to keep everything synchronized during transmission.

High-density bipolar 3-zero (HDB3): also focuses on keeping the data balanced and ensuring that
there are enough transitions. When there are four consecutive zeros in the data, HDB3 replaces them
with a unique pattern to maintain the balance of ones and zeros in the data, which is crucial for reliable
communication over long distances.
 Lecture # 66
Different situations in HDB3 scrambling technique.

In HDB3 four consecutive zero-level voltages are replaced with a sequence of 000V or B00V.

• If the number of nonzero pulses after the last substitution is odd, the substitution pattern will
be 000V, which makes the total number of nonzero pulses even.
• If the number of nonzero pulses after the last substitution is even, the substitution pattern will
be B00V, which makes the total number of nonzero pulses even.
• The V in the sequence denotes violation; this is a nonzero voltage that breaks an AMI rule of
encoding.
• The B in the sequence denotes bipolar, which means a nonzero level voltage in accordance with
the AMI rule.
 Lecture # 67
Analog-to-digital Conversion

• Analog Data to Digital Data: Analog data to digital data conversion involves sampling the analog
signal, quantizing the sampled values into discrete levels, encoding these values into binary
form, and then using digital systems to process, store, or transmit the digital representation of
the original analog information.
• Process of Digitization: The process of digitization involves converting analog information into
digital data, making it easier to store, process, and transmit.

Pulse Code Modulation (PCM)

Pulse Code Modulation (PCM) is a widely used method for digitally representing analog signals, such as
audio or video, in a format that can be easily processed and transmitted by digital systems.

Delta Modulation (DM)

Delta Modulation (DM) is a simple method used to digitally encode analog signals, typically for voice or
low-quality audio transmission.

Components of PCM encoder

Pulse Code Modulation (PCM)

Pulse Code Modulation (PCM) is a widely used method for digitally representing analog signals, such as
audio or video, in a format that can be easily processed and transmitted by digital systems.

• Sampling: The first step in PCM is to take samples of the analog signal at regular intervals.
• Quantization: Each of the sampled values is then quantized, which means assigning a numerical
value to represent the amplitude of the sample.
• Encoding: The quantized values are encoded into a digital format, typically using binary code (0s
and 1s)
 Lecture # 68
Three different sampling methods for PCM

Ideal Sampling:

• Often referred to as Nyquist sampling, is a theoretical concept in signal processing.

• According to the Nyquist-Shannon theorem, to accurately represent an analog signal in digital
form, you should sample it at a rate that is at least twice the signal's highest frequency (the
Nyquist rate).

Natural Sampling:

• Also known as impulse or instantaneous sampling, is a practical approach to capturing analog

signals.
• In natural sampling, the analog signal is sampled at specific points in time when an impulse or a
brief sampling pulse occurs.

Flat-Top Sampling:

• Flat-top sampling is a modification of natural sampling that helps reduce the effects of
quantization noise in analog-to-digital conversion.
• In flat-top sampling, the sampling pulse has a finite duration (flat top) rather than being
instantaneous.

Nyquist Sampling Rate

Nyquist's theorem states that to accurately capture an analog signal, the sampling rate should be at
least twice the signal's maximum frequency (Nyquist rate).

𝑵𝒚𝒒𝒖𝒊𝒔𝒕 à 𝒇𝒔 = 𝟐𝒇𝒉

Sampling Period (Ts):

The analog signal is sampled every Ts s, where Ts is the sample interval or period.
Sampling rate or sampling frequency:
The inverse of the sampling interval is called the sampling rate or sampling frequency and denoted by fs,
where fs = 1/Ts.

Nyquist Sampling Rate

Sampling sine wave at three sampling rates:

fs = 4f (2 times the Nyquist rate)

• Oversampling involves taking more samples of a signal than the minimum required by the
Nyquist-Shannon theorem.
• By oversampling, you collect more data points per unit of time, which can improve the accuracy
and reliability of the captured information.

fs = 2f (Nyquist rate)

• Nyquist's theorem states that to accurately capture an analog signal, the sampling rate should
be at least twice the signal's maximum frequency (Nyquist rate).

fs = f (one-half the Nyquist rate)

• Under sampling, on the other hand, involves sampling a signal at a rate lower than the Nyquist
rate.
• Under sampling intentionally captures fewer data points to reduce data volume or handle
multiple signals within a limited bandwidth.
 Lecture # 69
Quantization & encoding of a sampled signal.

• Sampling → Series of pulses with amplitude values between min and max signal amplitude
• Infinite set with non-integral values not suitable for encoding
• We quantize the sampling output into certain levels based on range of amplitudes and how
much accuracy is needed.

Quantization
After sampling, each of the sampled values is then quantized, which means assigning a numerical value
to represent the amplitude of the sample.

Quantization & encoding of a sampled signal.

• After each sample is quantized and the number of bits per sample is decided, each sample can
be changed to an nb-bit code word. In the above Figure, A quantization code of 2 is encoded as
010; 5 is encoded as 101 and so on.
• The number of bits for each sample is determined from the number of quantization levels.
• If the number of quantization levels is L, the number of bits is nb = log2 L.
• In the above example L is 8 and nb is therefore 3.
• Bit rate = sampling rate x number of bits per sample = fs x nb

Example:

The human voice normally contains frequencies from 0 to 4000 Hz. So the sampling rate and bit rate are
calculated as follows
 Lecture # 70
Original Signal Recovery- PCM Decoder

• The recovery of the original signal requires the PCM decoder.

• The decoder first uses circuitry to convert the code words into a pulse that holds the amplitude
until the next pulse.
• After the staircase signal is completed, it is passed through a low-pass filter to smooth the
staircase signal into an analog signal.
• The filter has the same cutoff frequency as the original signal at the sender.
• If the signal has been sampled at (or greater than) the Nyquist sampling rate and if there are
enough quantization levels, the original signal will be recreated.
• The maximum and minimum values of the original signal can be achieved by using amplification.
 Lecture # 71
Delta Modulation (DM)

• PCM is an extraordinarily complex technique.

• Delta modulation is a simpler technique.
• PCM finds the value of the signal amplitude for each sample; DM finds the change from the
previous sample.
• No code words in delta modulation; bits are sent one after another.

Modulator:
The modulator is used at the sender site to create a stream of bits from an analog signal.

Delta δ:

• The process records the small positive or negative changes, called delta δ.
• If the delta is positive, the process records a 1
• If it is negative, the process records a 0.

Staircase:

• The process also needs a base against which the analog signal is compared.
• The modulator builds a second signal that resembles a staircase.
• Finding the change is then reduced to comparing the input signal with the gradually made
staircase signal.

The process of delta modulation

The process of delta modulation

• The modulator, at each sampling interval, compares the value of the analog signal with the last
value of the staircase signal. If the amplitude of the analog signal is larger, the next bit in the
digital data is 1; otherwise, it is 0.
• The output of the comparator, however, also makes the staircase itself. If the next bit is 1, the
staircase maker moves the last point of the staircase signal δ up; if the next bit is 0, it moves it δ
down.
• Note that we need a delay unit to hold the staircase function for a period between two
comparisons.
 Lecture # 72
Delta Modulation (DM)

• Delta modulation is a simpler technique.

• DM finds the change from the previous sample.

• No code words in delta modulation; bits are sent one after another.

Delta Modulation Components

Delta Modulation Components

• The modulator, at each sampling interval, compares the value of the analog signal with the last
value of the staircase signal.
• If the amplitude of the analog signal is larger, the next bit in the digital data is 1; otherwise, it is
0.
• The output of the comparator, however, also makes the staircase itself.
 • If the next bit is 1, the staircase maker moves the last point of the staircase signal δ up.
• If the next bit is 0, it moves it δ down.
• We need a delay unit to hold the staircase function for a period between two comparisons.

Delta De modulation Components

Delta De modulation Components

• The demodulator takes the digital data and, using the staircase maker and the delay unit, creates
the analog signal.
• The created analog signal, however, needs to pass through a low-pass filter for smoothing.

Adaptive DM

• A better performance can be achieved if the value of δ is not fixed.

• In adaptive delta modulation, the value of δ changes according to the amplitude of the analog
signal.
 Lecture # 73
Wiring: when we are considering the wiring is the data stream.

Data Stream: Do we send 1 bit at a time; or do we group bits into larger groups and, if so, how?

Transmission Modes: Parallel or Serial Transmission

In parallel mode, multiple bits are sent with each clock tick.

In serial mode, 1 bit is sent with each clock tick.

Data transmission modes:

Parallel Transmission

• Binary data (1s ad 0s) organized in groups of ‘n’ bits.

• We send ‘n’ bits at a time instead of just one.
• ‘n’ wires required to send ‘n’ bits at one time.

Parallel Transmission
 • Computers produce and consume data in groups of bits. By grouping, we can send data n bits at
a time instead of 1. This is called parallel transmission.

• In parallel transmission, we use n wires to send n bits at one time. That way each bit has its own
wire, and all n bits of one group can be transmitted with each clock tick from one device to
another.
• In the above figure, we can see that how parallel transmission works for n = 8.
• Typically, the eight wires are bundled in a cable with a connector at each end.

Advantage:
Speed: Parallel transmission can increase the transfer speed by a factor of n over serial transmission.

Disadvantage:
Cost: Parallel transmission requires n communication lines (wires in the example) just to transmit the
data stream. It is expensive so parallel transmission is usually limited to short distances.

Lecture # 74
Serial Transmission

In serial transmission one bit follows another, so we need only one communication channel rather than
n to transmit data between two communicating devices. It also reduces the cost of transmission over
parallel by roughly a factor of n.

Since communication within devices is parallel, conversion devices are needed at the interface between
the sender and the line that is performing parallel-to-serial conversion and between the line and the
receiver which is conducting serial-to-parallel conversion.
Serial transmission occurs in one of three ways: asynchronous, synchronous, and isochronous.

Asynchronous Transmission

In asynchronous transmission, we send 1 start bit (0) at the beginning and 1 or more stop bits (1s) at the
end of each byte.

Asynchronous transmission is so named because the timing of a signal is unimportant. Information is

received and translated by agreed upon patterns. If those patterns are followed, the receiving device
can retrieve the information without regard to the rhythm in which it is sent.

Start Bit: An extra bit is added to the beginning of each byte to alert the receiver to the arrival of a new
group. This bit, usually a 0, is called the start bit.

Stop Bit: To let the receiver know that the byte is finished, 1 or more additional bits are appended to the
end of the byte. These bits, usually 1s, are called stop bits.

By this method, each byte is increased in size to at least 10 bits, of which 8 bits is information and 2 bits
or more are signals to the receiver.

Idle channel: In addition, the transmission of each byte may then be followed by a gap of varying
duration. This gap can be represented either by an idle channel or by a stream of additional stop bits.
 Lecture # 75
Synchronous Transmission

In synchronous transmission, we send bits one after another without start or stop bits or gaps.

• In the above figure it is showing divisions between bytes, in reality, those divisions do not exist.
• The sender puts its data onto the line as one long string.
• When a sender wants to transmit data in separate bursts, they need to insert a specific
sequence of 0s and 1s, signifying idle periods, in between these segments.
• The receiver counts the bits as they arrive and groups them into 8-bit units.
• In the absence of these idle intervals, as well as start and stop bits, there is no inherent
mechanism to assist the receiving device in adjusting its bit synchronization during the data
transmission process.
• As a result, precise timing becomes essential, as the accuracy of the received information relies
entirely on the receiving device's ability to maintain an accurate bit count as the data is
received.

Isochronous Transmission

• Used to send data in a predictable and timely manner.

• Data is sent at a fixed and constant rate, maintaining a precise timing schedule.
• This method is commonly used for real-time applications, such as audio and video streaming,
where it is crucial to deliver data at a consistent pace to ensure smooth playback or
communication.
 Lecture # 76
FYI: There’s no text in the reading section @VULMS for Lecture # 76. You can go through the lecture.

Lecture # 77
Before we discuss specific methods of digital-to-analog modulation, two basic issues must be reviewed:

Bit and Baud rates and The Carrier Signal:

The Baud rate refers to the total number of signal units transmitted in one second.

The Bit rate refers to the total Bits transmitted in one unit time.

In telecommunications, a carrier wave, carrier signal, or just carrier, is a waveform (usually sinusoidal)
that is modulated (modified) with an information-bearing signal (called the message signal or
modulation signal) for the purpose of conveying information.

In Analog Transmission of Digital Data, Baud Rate is less than or equal to the Bit Rate

Data Element vs. Signal Element

Data Rate vs. Signal Rate

Bandwidth Required ∝ Signal Rate (except FSK)

Carrier Signal

Lecture # 78
Example:

An analog signal carries 4 bits per signal element. If 1000 signal elements are sent per second, find the
bit rate?
Example:

An analog signal has a bit rate of 8000 bps and a baud rate of 1000 baud. How many data elements are
carried by each signal element? How many signal elements do we need?

Lecture # 79
• The amplitude of the carrier signal is varied to create signal elements
• Both frequency and phase remain constant while the amplitude changes
• Binary ASK or On-Off Keying (OOK)
 Lecture # 80
The amplitude of the carrier signal is varied to create signal elements.
Both frequency and phase remain constant while the amplitude changes
Binary ASK or On-Off Keying (OOK)
Implementation of Binary ASK or On-Off Keying (OOK)

(FYI: Numerical Problem) Example

We have an available bandwidth of 100 kHz which spans from 200 to 300 kHz. What are the carrier
frequency and the bit rate if we modulated our data by using ASK with d = 1?
 Lecture # 81
• The frequency of the carrier signal is varied to represent data.
• The frequency of the modulated signal is constant for the duration of one signal element, but
changes for the next signal element if the data element changes.
• Both peak amplitude and phase remain constant

Lecture # 82
The frequency of the carrier signal varies to represent data.
Both peak amplitude and phase remain constant.

(FYI: Numerical problem) Example:

We have an available bandwidth of 100 kHz which spans from 200 to 300 kHz. What should be the
carrier frequency and the bit rate if we modulated our data by using FSK with d = 1?
Implementation of BFSK:

Lecture # 83
The phase of the carrier is varied to represent two or more different signal elements.
Both peak amplitude and frequency remain constant.
PSK is relatively more common than ASK or FSK.
Quadrature Phase Shift Keying (QPSK) is a form of Phase Shift Keying in which two bits are modulated at
once, selecting one of four possible carrier phase shifts (0, 90, 180, or 270 degrees).
Binary Phase Shift Keying

Implementation of Binary Phase Shift Keying

 Lecture # 84
• Helps us define the phase and amplitude of a signal element when we are using two carriers
(one in phase and other in quadrature)
• Signal element is represented as a dot.

Lecture # 85
PSK is limited by the ability of the equipment to distinguish small differences in phase which limits its
potential bit rate.
We have been altering only one of the three characteristics of a sine wave at a time; but what if we alter
two?
Why not combine ASK and PSK?
Constellation diagrams for some QAMs.
 Lecture # 86
Representation of Analog information by an Analog signal
Amplitude Modulation (AM)
Frequency Modulation (FM)
Phase Modulation (PM)
Types of Analog-to-Analog Modulation

Amplitude modulation

Lecture # 87
FYI: This reading section contains the same stuff except the below heading and pic.

Frequency Modulation (FM)

 Lecture # 88
FYI: This reading section contains the same stuff except the below heading and pic.

Phase Modulation (PM)

Lecture # 89
• Simultaneous transmission of multiple signals across a single data link
• As data & telecom use increases, so does traffic.
o Add individual links each time a new channel is needed.

Install higher-bandwidth links and use each to carry multiple signals.

Multiplexing involves combining multiple data streams into a single transmission channel. On the other
hand, demultiplexing involves separating a single transmission channel into multiple data streams at the
receiving end.
 Lecture # 90
There are three types of multiplexing:

Frequency Division Multiplexing (FDM) Time-Division Multiplexing (TDM) Wavelength Division

Multiplexing (WDM)

An analog technique that can be applied when the bandwidth of a link (in hertz) is greater than the
combined bandwidths of the signals to be transmitted.

Signals generated by each sending device modulate different carrier frequencies.

These modulated signals are then combined into a single composite signal that can be transported by
the link.

Lecture # 91
• An analog technique that can be applied when the bandwidth of a link (in hertz) is greater than
the combined bandwidths of the signals to be transmitted.
 Lecture # 92
• Telephone companies multiplex signals from lower-bandwidth lines on to higher-bandwidth
lines.
• For Analog, FDM is used.

Lecture # 93
• Designed to use the high-data-rate capability of fiber-optic cable.
• Fiber data rate is higher than the data rate of metallic transmission cable.
• Using a fiber-optic cable for a single line wastes the available bandwidth.
• Multiplexing allows us to combine several lines into one.
 Lecture # 94
• Digital process that allows several connections to share the high bandwidth of a link
• Time is shared i.e. each connection occupies a portion of time in the link

Synchronous time division multiplexing assigns a fixed time slot to each connected device,
whether the device transmits data or not. With asynchronous time division multiplexing, time
slots are flexible, and assigned when connected devices have data that is ready to send.
 Lecture # 95
• Digital process that allows several connections to share the high bandwidth of a link.
• Time is shared i.e. each connection occupies a portion of time in the link

Interleaving
On the multiplexing side, as the switch opens in front of a connection, that connection has the
opportunity to send a unit onto the path. This process is called interleaving. On the demultiplexing side,
as the switch opens in front of a connection, that connection has the opportunity to receive a unit from
the path.

Lecture # 96
Multilevel multiplexing is a technique used when the data rate of an input line is a multiple of others.

Multiple multiplexing is a technique used to allot more than one slot in a frame to a single input line.
Sometimes the bit rates of sources are not multiple integers of each other. Then to make the data rate
compatible, dummy bits are added to input lines . This technique is called pulse stuffing, bit padding, or
bit stuffing.

Lecture # 97
• Digital process that allows several connections to share the high bandwidth of a link.
• Time is shared i.e. each connection occupies a portion of time in the link

To maximize the efficiency of their infrastructure, telephone companies have traditionally multiplexed
digital signals from lower data rate lines onto higher data rate lines. The digital hierarchy uses DS-0 (64
Kbps), DS-1 (1.544 Mbps), DS-2 (6.312 Mbps), DS-3 (44.376 Mbps), and DS-4 (274.176 Mbps).
 Lecture # 98
Statistical TDM

In synchronous TDM, each input has a reserved slot in the output frame. This can be inefficient if some
input lines have no data to send.

In statistical time-division multiplexing, slots are dynamically allocated to improve bandwidth efficiency.

Only when an input line has a slot's worth of data to send is it given a slot in the output frame.

In statistical multiplexing, the number of slots in each frame is less than the number of input lines.

The multiplexer checks each input line in round-robin fashion; it allocates a slot for an input line if the
line has data to send; otherwise, it skips the line and checks the next line.
 Lecture # 99
• In wireless applications, stations must be able to share the medium without interception by an
eavesdropper and without being subject to jamming from a malicious intruder.
• To achieve these goals, spread spectrum adds redundancy and spread original spectrum needed
for each station.

SPREAD SPECTRUM – Principles

• Bandwidth allocated to each station needs to be larger than what is needed to allow
Redundancy.
• Spreading process should be independent of the original signal.

Lecture # 100
Frequency Hopping Spread Spectrum (FHSS)

• ‘M’ different carrier frequencies that are modulated by the source signal.
• At one moment, signal modulates one carrier frequency and at next moment, it modulates
another.
Frequency Selection in FHSS
DSSS

• DSSS also expands the bandwidth of the original signal, but the process is different.
• We replace each data bit with ‘n’ bits using a spreading code.
• Each bit is assigned a code of ’n’ bits, called chips, where the chip rate is ‘n’ times that of the
data bit.

*********************************************************************

So this’s the end of life for mid-term examinations (Dated: December 11, 2023). It includes
1-100 lectures.