CLSS – LAN Connected Horizon
LCH Feature Activation
Prerequisites
Introduction
This module guides on configuring the CLSS LAN Connect Horizon (LCH) feature in the • Site Manager - Overview
CLSS Gateway
• Site Manger – Customers
The CLSS Connected Life Safety Service app is required to activate the feature This app is
available on both, Android and iOS platforms. Search for “Connected Life Safety Services”. • Fire Panel - Connecting to “Specific Brand”
The following topics are covered: • Site Manager - Uploading Device Inventory
Site Manager & CLSS Mobile App
• Verifying & Purchasing LCH Feature Activation (Site Manager)
• Installing a new CLSS Fixed Gateway & Adding LCH Feature (Mobile App)
CLSS Gateway Firmware
• Setting Static IP address • Retrieve MAC Address
• Minimum firmware version
• Adding LCH Feature to Existing Fixed CLSS Gateways (Mobile App) required 3.4.4.16.
• CLSS Gateway Configuration using a Laptop
• Enable Time Sync • Setting Static IP • Retrieve MAC Address
• How to Update the CLSS Gateway Certificate manufactured before May 2021
• Updating Inventory Using Existing Fixed CLSS Gateway (Site Manager)
• Exporting LCH Inventory (Site Manager) Optional Tools Required
LAN Connected Horizon
• Generating LCH Certificate (Workstation)
• PC With Ethernet Port
• Configuring CLSS Horizon Application (Workstation) • Ethernet cable
• CLSS Horizon Sample Events
CLSS – LCH Feature
Verifying & Purchase LCH Feature
Introduction
This section walks you through how to purchase the LAN Connected Horizon One Time Activation
Feature & LAN Connected Horizon Panel Subscription in the CLSS Connected Life Safety Services site
manager.
What is LAN Connected Horizon
• Local On premises connected solution
• View + Control Features
• CLSS Gateway Compatible
• Local PC Administrator Account required to login to workstation
• Click on Your Name in the top right
• Click Manage Access
• Click Features -
• Click Gateways – Any available Lan Connect Horizon feature would be visible here otherwise
• Click Purchase
• Click Features
Purchasing LCH Feature
• LAN Connected Horizon One
Time Activation – One feature
is required per CLSS Gateway
• LAN Connected Horizon Panel
Subscription – One feature is
required per panel Main CPUS
(Not Voice or Remote Displays)
• Click Purchase
• Note – Can purchase up to 20 at a
time
Confirmation of Purchase
• Confirmation of purchase
• Click Confirm
• LAN Connected Horizon feature will appear approx. ~2-3 minutes after purchase
CLSS – CLSS Gateway
Installing a new CLSS Fixed Gateway & Adding LCH Feature (Mobile App)
Introduction
This section of the module walks you through step by step on how to install a Fixed CLSS
Gateway, setting the static IP address of the CLSS Gateway & Activate the LAN Connected Horizon One
Time Activation Feature & LAN Connected Horizon Panel Subscription, using the Connected Life Safety
Services mobile app
Installing Fixed Gateway
The process of installing a fixed gateway and activating LCH
begins by opening the Quick Wizard in the CLSS Mobile app.
The wizard is opened by tapping on the Three dots in the top right-
hand corner.
Tap on Install Fixed Gateway to begin the installation.
*When installing a new fixed CLSS gateway; CLSS gateway will
automatically fetch panel inventory
**Additional information located in the dedicated Brands Gateway
installation module
Customer / Site Selection
• Select the Customer where • Select the Site where the • Select the Ownership Code
the gateway will be installed gateway will be installed (OC) of the desired gateway
Gateway Configuration screen
Bluetooth Pairing to CLSS Gateway • Current Firmware
• BLE Passkey copied to clipboard • Select Panel Brand
• Using Bluetooth, pair with the • The pairing key is displayed in • Configure Network Summary
gateway the top right-hand corner
Gateway Configuration : Panel Connection
• Click Panel Brand & Connection • Select Desired Panel Brand
Type • Click Next
Cellular Connection
(only in selected regions & connecting to CLSS Cloud)
• Carrier
• AT&T
• Verizon
• Vodafone (where supported)
• IMEI
• ICCID
Wi-Fi Connection
(when connecting to CLSS Cloud)
• Wi-Fi SSID
• Wireless Network Name
• Wi-Fi PASSWORD
• Password for the Wireless Network
Ethernet Connection
(OFFLINE or When connecting to CLSS Cloud)
• DHCP is enabled by default
• Disable DHCP Click ethernet
connection
Setting Static IP Address
• Click Ethernet Connection
• Enter Static IP Address
• Enter Subnet Mask
• Enter IP Gateway
• Enter Preferred DNS Server
• Enter Alternate DNS Server
• Ethernet Connection 1 MAC
Address
• Note: Ethernet Cable must be
connected before
configuring IP address
Gateway Successfully Connected
• Select NEXT • Gateway has been successfully • Select ADD Activation
connected
• Select LAN Connect Horizon
Panel Support
• Select the Ownership Code • Click ADD Activation • Select LAN Connect Horizon
(OC) of the desired gateway One Time Activation
• Click Activate
• Confirm LAN Connect Horizon
Panel Support – 1 per Fire
Panel Node
• Applying Activations
• Confirm LAN Connect Horizon
One Time Activation – 1 per
CLSS Gateway
• Click Confirm
• Activation Successfully
• Downloading • Click Proceed
Applied
Feature Activations
• Click Okay
Node / Building Mapping
• Select Assign Building • Select the Building • Select PROCEED
• If multiple nodes are in each building, • If building is not in your list, select add
select the check box for each node new building.
before selecting Assign Building • Confirm with your CLSS admin before
creating a new building
Fetching Panel Inventory
• Device fetch has been initiated
• If inventory is not in CLSS, CLSS
gateway will start fetching inventory
from all connected nodes
• Select CLSS Gateway OC to • Select CLOSE
• If inventory is in CLSS, CLSS gateway view status
will connect right away
CLSS – LCH Feature Activation
Add Feature to Existing Fixed CLSS Gateways (Mobile App)
Performing Feature Activation
• The process of activating LAN Connected Horizon for existing
CLSS Gateways begins by opening the Quick Wizard in the
CLSS Mobile app.
• The wizard is opened by tapping on the three dots in the top
right-hand corner.
• Tap on Perform Feature Activation to begin the installation.
*Must be located near the CLSS Gateway.
**Additional information located in the dedicated Brands Gateway installation
module
• Select Fixed Gateways • Select the Customer where • Select the Site where the
the gateway is installed gateway is installed
• Select LAN Connect Horizon
Panel Support
• Select the Ownership Code • Click ADD Activation • Select LAN Connect Horizon
(OC) of the desired gateway One Time Activation
• Click Activate
• Confirm LAN Connect Horizon • Activation Successfully
Panel Support – 1 per Fire • Applying Activations Applied
Panel Node
• Confirm LAN Connect Horizon • Click Okay
One Time Activation – 1 per
CLSS Gateway
• Click Confirm
• Downloading Feature
• Using Bluetooth, pair • Click Proceed
Activation
with the gateway.
• Click Okay
CLSS – Gateway Configuration
CLSS Gateway Configuration using a Laptop
To Gain Access to CLSS Gateway with PC S6
1. Connect your laptop to the (2) Secondary Ethernet
port (Eth0) providing a TCP/IP connection to a
configuration computer.
2. Press the S6 - Securely used for configuring the
gateway’s settings
Pressing the switch for six seconds switches the gateway
board to the configuration mode.
DL3 LED indicator will turn on solid
3. In the Chrome browser, enter the following URL:
https://192.168.10.190:9443/config/index.html 2
1. Click the Advanced Link below the error message
2. Agree to proceed
3. Passwords
1. Welcome123
2. Welcome3
3. Password1
CLSS – Gateway Configuration
Checking CLSS Gateway Certificate
• Click Diagnostic
Validate CLSS Gateway Certificate
• Under Generate Certificate:
• If it says This gateway has a valid certificate, skip to the next section
• If it Blank or says This gateway does not have a valid certificate, skip to section How to upgrade CLSS
Gateway Certificate
CLSS – Gateway Configuration
Setting Network Settings
• Click Network Settings
Ethernet Connection
• DHCP is enabled by default
• To Disable DHCP and set a
Static IP address Uncheck
Check to enable DHCP
• Setting Static IP Address
• Enter Static IP Address
• Enter Subnet Mask
• Enter IP Gateway
• Enter Preferred DNS Server
• Enter Alternate DNS Server
• Ethernet Connection 1 MAC
Address
• Note: Ethernet Cable must be
connected before configuring
IP address
CLSS – Gateway Configuration
Setting Time SYNC
• Click Network Settings
CLSS Gateway Time Sync
• Scroll down to TIME SYNC
SETTINGS
• Check Enable Timesync
• Fill In
• Time Server IP – enter IP
address of time server
• Time Sync Frequency – enter
how often to sync the time
(1,4,8,12,16,20,24)
• Time Zone – select the time
zone
• Sync time with panel – Yes/No
• Click Save
CLSS – Gateway Configuration
Retrieving MAC Address
• Click About
MAC Address
• Ethernet 1 is the MAC Address
of the TCP/IP port for LCH
CLSS – Gateway Configuration
How to Update the CLSS Gateway Certificate
manufactured before May 2021
Introduction to Updating CLSS Gateway Certificate
This step is required if the CLSS Gateway was manufactured before May 2021 to install the
latest CLS Gateway security certificate, this is not required for gateways purchased after May 2021.
Gateways manufactured
before May 2021 will have this
temporary momentary switch
To Gain Access to CLSS Gateway with PC S6
1. Connect your laptop to the (2) Secondary Ethernet
port (Eth0) providing a TCP/IP connection to a
configuration computer.
2. Press the S6 - Securely used for configuring the
gateway’s settings
Pressing the switch for six seconds switches the gateway
board to the configuration mode.
DL3 LED indicator will turn on solid
3. In the Chrome browser, enter the following URL:
https://192.168.10.190:9443/config/index.html 2
1. Click the Advanced Link below the error message
2. Agree to proceed
3. Passwords
1. Welcome123
2. Welcome3
3. Password1
• Click Diagnostic
Step 1) Download CSR File Generate Certificate
• Click Download CSR
• Log into www.fire.Honeywell.com to upload CSR file
Step 2) Uploading CSR File to
CLSS Site Manager
• Click on the Gear
• Click Horizon Certificate
Management
• Enter the Ownership Code OC of the
CLSS Gateway
• Upload CSR File download from
CLSS Gateway
• Click Generate
Step 2) Certificate Generated
• CLSS Gateway Certificate is Automatically downloaded to your download folder
• Click OK GOT IT
• Log into CLSS gateway https://192.168.10.190:9443/config/index.html to upload Certificate
• Connect your laptop to the (2) Secondary Ethernet
• Press the S6 – till panel LED comes on
Step 3) Upload Certificate
• Click Diagnostic
Step 3) Upload Certificate
• Click CHOOSE File – browse to where the CLSS Gateway Certificate was saved
• Click Upload Certificate
Step 4) Certificate Update Confirmation
• Confirm it says Certificate Installation Successful
• Confirm it says This Gateway has a valid certificate
CLSS – Inventory Sync
Updating Inventory Using Existing Fixed CLSS Gateway (Site Manager)
Introduction
Before activating the CLSS LAN Connected Horizon (LCH) to an existing CLSS gateway, it’s best
practice to make sure the most recent panel inventory is uploaded to CLSS Site Manager. This can be
achieved 2 different ways shown below, this section of the module walks you through how to sync the
panel inventory using a CLSS Gateway (where supported)
• Perform an inventory sync were supported from CLSS Site Manager to ensure any newly added or
removed devices have been updated in the gateway’s inventory.
• Upload Panel data base file to CLSS Site Manager (refer to training module Site Manager -
Uploading Device Inventory)
• Select the Site where the CLSS gateway is installed from the Customer, Site, Building List
• Select the Customer.
• Select the Site.
• Click Apply.
• From the dashboard tab click Sync Site.
Sync Site
• click Sync Now
Sync Site
• Check the box next to the desired
Node or Nodes to sync.
• Click Sync.
• A dialogue box will be displayed confirming the sync has been initiated.
• Click Okay, Got It.
Sync Site Completed
• When SYNC is completed,
a message will be
displayed along the bottom
of the screen:
• View Summary of the
inventory sync.
• Dismiss to dismiss the
message.
View SYNC Summary
• Newly added devices will
be listed under Devices
Added.
• Any devices that have
been removed from the
system will be marked as
Decommissioned.
• Status Updated devices
shows the total number
of currently connected
devices including those
which have updated
device labels.
CLSS – LCH Inventory
Exporting LAN Connect Horizon Inventory
• Select the Site where the CLSS gateway is installed from the Customer, Site, Building List
• Select the Customer.
• Select the Site.
• Click Apply.
• Select the Device List
• Select the Export
• Click Inventory for Horizon Software
• .json file will get generated example: SiteName.json
CLSS – Horizon
Generating LCH Certificate (Workstation)
Start CLSS Horizon Certificate Manager
• Launch Certificate Manger from Start
Programs.
Step 1) Generate a certificate request
from the certificate manager on the
workstation
• Click Copy
• This will copy the PC’s workstation ID
to your clipboard to be used in Step 2
• Click Generate Certificate Request
• Save certificate to your local PC
• Click OK
Step 2) Upload the certificate request on
site manager by clicking on Generate
Certificate
• Log into CLSS Site Manager
(www.fire.Honeywell.com)
• Click on Feature Activation
• Select the Site where the CLSS gateway is installed from the Customer, Site, Building List
• Select the Customer.
• Select the Site.
• Click Apply.
• Select Workstations
• Click Add Workstation
• Click Adding LAN-Connected Horizon
for Certificate Generation
• Paste the workstation ID you copied
from the Certificate Manager
• Click Next
• Select Brand the workstation is
connecting to.
• Select the Building the
workstation is installed
• Click on Select CSR File
• Browse to the csr file you
downloaded from the CLSS
Horizon Certificate Manager
• After file is uploaded and
Validated Successfully Click
Generate Certificate
• Certificate will be
automatically downloaded
and saved to your PC
Downloads folder
• You can manually download
the certification by clicking
Download
• If you need to re-generate
the workstation certificate,
please click Re-Generate
Step 3) Install the certificate on the
certificate manager
• Open CLSS Horizon Certificate
Manager
• Click Browse
• Browse to the certificate you
downloaded from CLSS Site
Manager
• Click Install
• Click Exit
CLSS – LCH Horizon
Configuring CLSS Horizon Application
Starting CLSS Horizon
• Launch CLSS Horizon application
from Start Programs
• Required Ports:
Port Type Direc Purpose
Number tion
25 TCP Out SMTP - For sending emails
In
123 UDP and SNTP - For Time sync
Out
MQTT communication between
1884 TCP Out Gateway & Workstation (Added for
LCH)
2017 TCP Out Connection to the NFN Gateway
(Internal) Workstation Plug-in
2004 TCP N/A
Access
4016 TCP In Database Import/Export
Setting Administrator Password
• Create Administrator Password
for CLSS Horizon Application
Logging into CLSS LCH
• Click on Menu
• Click File
• Click Login
• Enter administrator password you
created.
Launch Configuration Tool
• Click on Menu
• Click Configure
• Click Launch Configuration Tool
Adding Network
• Click on System
• Click Networks
Update
Configuring Customer Networks screen shot to
add box
• Click ADD around IP
address
• Enter Alias
• Example: Customer / Site Name
• Type
• CLSS -NFN
• IP Address
• The Static IP Address of the CLSS
Gateway
• Import Inventory
• Browse to the .json file downloaded
from CLSS Site Manager
• Click OK
Configure Required Floorplans
• Right Click on Home
• Click Add Screen
• Click OK
*For additional information reference CLSS
Horizon Workstation LAN-Connected
Graphical User Interface Installation and
Operation Manual
Configure Required Floorplans
• Place the devices on the
floorplans from the
inventory listed on the
right-side tree view
*For additional information
reference CLSS Horizon Workstation
LAN-Connected Graphical User
Interface Installation and Operation
Manual
Exiting Configuration Tool
• Click File
• Click Exit
• Save & Synchronize
System:
• Click Yes to save
changes & exit
• Click No to exit and
do not save changes
• Click Cancel to go
back to
configuration tool
*For additional information
reference CLSS Horizon Workstation
LAN-Connected Graphical User
Interface Installation and Operation
Manual
CLSS –LCH Horizon
Sample Event Types
• All Systems Normal
• Fire Alarm
• CO Alarm
• Disablement
• Trouble
CLSS Horizon Feature Activation
Completed
