Accessories

for sensors

Mounting and installation

Adapters for pressure sensors:
ZBM 01
Adapter female thread G1/4 –
male thread G1/2 B,
DIN EN 837-1
Hex AF Part no.: 257276
width 27

Flat seal ring Cu

6.2x17.5x2.0

ZBM 02
Adapter female thread G1/4 –
male thread G1/2 A,
ISO 1179-2
Part no.: 257277
Hex AF
width 27
O-ring
20.35x1.78
-NBR

ZBM 13
Adapter female thread G1/4 –
male thread G1/4 A,
with orifice 0.5 mm
Part no.: 906968
Hex AF
width 27
Elastomer
profile seal ring
DIN 3869

Orifice 13

ZBM 14
Adapter female thread G1/4 –
male thread G1/4 (rotating)
Part no.: 907818
Hex AF
width 19
EN 18.128.0/02.18

Elastomer
profile seal ring
DIN 3869

467
 Mounting accessories for
HDA 8000, EDS 8000 and EDS 810:
ZBM 8000
Clamp for wall-mounting
– screw-type fitting –
hex. socket cap
(Material of lower section:
screw ISO4762
TPE Santoprene 10187;
Material of top section:
steel strip DIN 95381-1.4571)
Part no.: 3546755

ZBM 8100
Clamp for wall-mounting
– weld-type fitting –
(Material of welding bridge:
hex. socket cap
QSTE340TM, zinc coating
screw ISO4762 EN 12329 FE/ZN8/B;
Material of lower section:
TPE Santoprene 10187;
Material of top section:
steel strip DIN 95381-1.4571)
Part no.: 3546757

Mounting accessories for

EDS 3000, ETS 3000, AS 3000, ENS 3000 and HNS 3000:
ZBM 3000
Clamp for wall-mounting
– screw-type fitting –
(Material of lower section:
TPE Santoprene 10187;
hex. socket cap Material of top section:
screw ISO4762
steel strip DIN 95381-1.4571)
Part no.: 3184630

ZBM 3100
13 Clamp for wall-mounting
– weld-type fitting –
(Material of welding bridge:
QSTE340TM, zinc coating
hex. socket cap
screw ISO4762
EN 12329 FE/ZN8/B;
Material of lower section:
TPE Santoprene 10187;
Material of top section:
steel strip DIN 95381-1.4571)
Part no.: 3184632
EN 18.128.0/02.18

468
 ZBM 3200
Splash guard
(Material:
Elastollan S60 A15 SPF 000)
Part no.: 3201919

Mounting accessories for

EDS 300 and ETS 300:
ZBM 300
Clamp for wall-mounting
– screw-type fitting –
(Material polypropylene)
Part no.: 906385

ZBM 310
Clamp for wall-mounting
– weld-type fitting –
(Material polypropylene,
aluminium AlSi12, steel)
Part no.: 6011511

13
hex. socket cap screw ISO4762
EN 18.128.0/02.18

469
 Mounting accessories for
EDS 1700 and ETS 1700:
Vibration mounts
Part no.: 257492

Installation accessories for

ETS 3000 (100 mm):
Protective sleeve for tank installation
Hex AF width 27
(Material CuZn39Pb3 - DIN 1763,
electro-nickel-plated)
Part no.: 909640

Connection accessories for

ENS 3000:
ZBM 19
Straight bulkhead connection acc. to
Compression nut
(AF width 36)
ISO 8434
ISO8434-1-N-L22-St Part no.: 908738
Note: Not suitable for
ENS with 250 mm rod length

lock nut AF width 41

approx.

Seal ring Cu
DIN7603-A 30x36
AF width 36

13
ZBM 20
Straight male stud coupling acc. to
ISO 8434
Compression nut Part no.: 908739
(AF width 36)
ISO8434-1-N-L22-St

Hex AF
width 32
EN 18.128.0/02.18

470
Connection accessories for
HLB 1400:
ZBM 21 (Flow)
Hex AF Mounting block
width 46
for flow rates > 2 l/min
Part no.: 3244260

ZBM 23 (Low Flow)

Mounting block
for flow rates from 0.5 .. 10 l/min
Part no.: 3299331

O-ring 21x4-NBR-70Sh

Connection accessories for

AS 1000 and AS 3000:
ZBM 22
Mounting block for AquaSensor
Part no.: 3248511

13
EN 18.128.0/02.18

471
 Distance and position sensor accessories
Magnets for HLT 700, HLT 1000 and HLT 2000:
Magnets

ZBL MVS35-39
ZBL MU38-20
ZBL MF38-18
ZBL MR 25.4
ZBL MR17.4

ZBL MR 33
ZBL MR22

ZBL MV63
ZBL MR-
HLT700
Distance
sensors

HLT 1100      
HLT 2100      
HLT 2102/3      
HLT 2150      
HLT 2500-F1 
HLT 2500-L2   
HLT 2550   
HLT 700 
ZBL MR17.4
Position magnet for HLT 1x00 and HLT 21xx
Part no.: 6119372

ZBL MR22
Position magnet for HLT 1x00 and HLT 21xx
Part no.: 6084453

ZBL MR25.4
Position magnet for HLT 1x00 and HLT 21xx
Part no.: 6141689

13

ZBL MR33
Position magnet for HLT 1x00 and HLT 21xx
Part no.: 6084207
EN 18.128.0/02.18

472
 ZBL MR-HLT700
Position magnet for HLT 700
0 Part no.: 4105026
n2

n1
1

14

ZBL MF38-18
Position magnet for HLT 2500-F1
Part no.: 6084456

ZBL MU38-20
Position magnet for HLT 1x00, HLT 21xx and
HLT 25xx-L2
Part no.: 6084455

ZBL MV63
Position magnet for HLT 1x00, HLT 21xx and
HLT 25xx-L2
Part no.: 6084454

ZBL MVS35-39
Magnet slide for HLT 25xx-L2
Part no.: 6105654 13
EN 18.128.0/02.18

473
 Mounting and installation accessories for
HLT 2000:
Mounting kit
for HLT 25xx
Part no.: 6105653

Intermediate ring AD17.4xID13.5x5

for HLT 21xx
Part no.: 3903233

Intermediate ring AD33xID13.5x5

for HLT 25xx
24
Part no.: 3887829
+0.3
4.1
4x

5 ±0.1
13.5 ±0.2
33 ±0.2

13
EN 18.128.0/02.18

474
Electrical connection
For electrical connection code "4" (Binder series 714 M18):
ZBE 02
Mating connector, Binder series 714 M18
4 pole, straight
Cable diameter: 6.5 .. 8 mm
Part no.: 609479

ZBE 03
Mating connector, Binder series 714 M18
4 pole, right-angle
Cable diameter: 6.5 .. 8 mm
Part no.: 609480

For electrical connection code "5" (male EN 175301-803):

ZBE 01
Mating connector
EN175301-803
3 pole + PE, right-angle
Cable diameter: 4.5 .. 7 mm
Part no.: 905701

Profile seal ring

For electrical connection code "6" and "006" (male M12x1, 4 pole):
ZBE 06
Mating connector M12x1
4 pole, right-angle
Cable diameter: 2.5 .. 6.5 mm
Part no.: 6006788

ZBE 06-02
Mating connector M12x1 13
4 pole, right-angle
with 2 m cable
Part no.: 6006790

ZBE 06-05
Mating connector M12x1
4 pole, right-angle
with 5 m cable
Part no.: 6006789
Colour code
EN 18.128.0/02.18

Pin 1 brown
Pin 2 white
Pin 3 blue
Pin 4 black

475
 ZBE 06S-03
Mating connector M12×1
4 pole, straight
with 3 m cable, shielded
Part no.: 6098243
ZBE 06S-05
Mating connector M12×1
4 pole, straight
with 5 m cable, shielded
Part no.: 6143284

ZBE 06S-05
Mating connector M12x1
4 pole, right-angle
with 5 m cable, shielded
Part no.: 6044891
Colour code
Pin 1 brown
Pin 2 white
Pin 3 blue
Pin 4 black

For electrical connection code "7" (male DIN EN 175201-804):

ZBE 10
Mating connector DIN EN 175201-804
6 pole + PE, right-angle
Cable diameter: 7 .. 9 mm
Part no.: 654527

For electrical connection code "8", "008" and "C61" (male M12x1, 5 pole):
ZBE 08
Mating connector M12x1
5 pole, right-angle
Cable diameter: 2.5 .. 6.5 mm
Part no.: 6006786

ZBE 08-02
Mating connector M12x1
5 pole, right-angle
with 2 m cable
13 Part no.: 6006792

ZBE 08-05
Mating connector M12x1
5 pole, right-angle
with 5 m cable
Part no.: 6006791
Colour code
Pin 1 brown
Pin 2 white
Pin 3 blue
EN 18.128.0/02.18

Pin 4 black
Pin 5 grey

476
 ZBE 08S-02
Mating connector M12x1
5 pole, right-angle
with 2 m cable, shielded
Part no.: 6019455

ZBE 08S-05
Mating connector M12x1
5 pole, right-angle
with 5 m cable, shielded
Part no.: 6019456

ZBE 08S-10
Mating connector M12x1
5 pole, right-angle
with 10 m cable, shielded
Part no.: 6023102
Colour code
Pin 1 brown
Pin 2 white
Pin 3 blue
Pin 4 black
Pin 5 grey

ZBE 30-02
Connection cable M12x1
male/female
or
5 pole, 2 m
Part no.: 6040851

ZBE 30-05
Connection cable M12x1
Male type label Female
M12x1 5 pole M12x1 5 pole male/female
5 pole, 5 m
Part no.: 6040852

For electrical connection code "P" and "00P" (male M12x1, 8 pole):
ZBE 0P
Mating connector M12x1
8 pole, right-angle
Cable diameter: 4 .. 8 mm
Part no.: 6055444

ZBE 0P-02
Mating connector M12x1
8 pole, right-angle
with 2 m cable
Part no.: 6052697

ZBE 0P-05
Mating connector M12x1
8 pole, right-angle
with 5 m cable 13
Part no.: 6052698
Colour code
Pin 1 white
Pin 2 brown
Pin 3 green
Pin 4 yellow
Pin 5 grey
Pin 6 pink
Pin 7 blue
EN 18.128.0/02.18

Pin 8 red

477
 For electrical connection code "M06" (male M16, 6 pole):
Mating connector C091,
6 pole, straight
AF width 16 Part no.: 654653

Mating connector C091,

Dimension A 6 pole, right angle
Part no.: 6174764

For electrical connection code "M08" (male M16, 8 pole):

Mating connector C091,
8 pole, straight
AF width 16 Part no.: 6123255

Mating connector C091,

Dimension A 8 pole, right angle
Part no.: 6174765

13
EN 18.128.0/02.18

478
For electrical connection code "S00" (CONTACT male connector, 12 pole):
Cable connector M23,
12 pole, straight
Part no.: 6120462

AF width 20

Cable connector M23,

12 pole, right-angle
Part no.: 6120463

AF AF width 24
width 20

For electrical connection code "M06", "M08" and "M24" (separate male connector Molex,
3 pole) for HLT 724 and HLT 1100:
ZBE 50
Male flange connector DT04,
3 pole Molex
Part no.: 4143770

Pin assignment:
O-ring 14x1.25
DT04 Molex
A 1
B 2
C 3
Molex Micro Fit 3.0
Housing 43640-0301
Crimp contacts 3x 43013-0001

13
EN 18.128.0/02.18

479
13

Note:
The information in this brochure relates to the HYDAC ELECTRONIC GMBH
EN 18.128.0/02.18

operating conditions and applications described. Hauptstr. 27, 66128 Saarbrücken

Germany
For applications or operating conditions not Telephone +49 (0)6897 509-01
described, please contact the relevant technical Fax +49 (0)6897 509-1726
department. e-mail: [email protected]
Subject to technical modifications. Internet: www.hydac.com

480