[GETTING STARTED]

PREPARATION OPERATION REFERENCE

LING S YS TEM
NIC LAB E
ELECTRO

PT-6100 Power Supply & Tape Cassettes Keyboard & LCD Troubleshooting
USER'S GUIDE Open the tape compartment
cover by pressing in the rough
Tape compartment
cover Size
Error message
Message Cause/Remedy
English / Español area at the top end of the Width
www.brother.com machine. Battery The batteries are weak. Replace them with new ones.
Style
If a tape cassette is already BATTERY! The installed batteries are about to run out.
Printed in China installed, remove it by pulling it
LW8817001 Cursor Invalid • There is no text above the cursor when you set Numbering.
straight up. Also, if batteries are Underline/Frame • Invalid character is selected for Numbering.
Print Caps • Invalid number is selected for Tab Length or Label Length.
already installed, remove them. head Label Length
Time/Date key No Text • You tried to print a text file when there is no data stored in
• Make sure that the power is Print key
Power key the memory.
turned off when replacing Enter key • The Print key is pressed when no text is entered.
batteries or tape cassette. Cursor key • You tried to set Copies, Numbering, Mirror, or Text Preview
Tape cutter lever Backspace key
Clear key when no text is entered.
Insert six new AAA alkaline Function key
Number key Line Lmt • You tried to enter a 3rd line by pressing the Enter key.
batteries (LR03), making sure • You tried to print a 2 line text when 0.13" (3.5mm) or 0.23"
INTRODUCTION
that their poles point in the (6mm) tape is installed.
correct directions. Always
No Cassette You tried to print a label when there is no cassette installed.
replace all six batteries at the
With your PT-6100, you can create labels for any application. Select from the same time using brand new Cutter Error Tape cutter lever is used in the middle of printing process.
many frames, character sizes and styles to design beautiful custom labels. In ones. Character key Full The maximum number of characters (80 characters) have
addition, the variety of tape cartridges available allows you to print labels with already been entered.
different widths and exciting colors. Text Lmt The text length exceeds the selected label length or the
Read this manual carefully before starting and keep the manual in a handy Caps key Accent key selected Auto Format setting length.
place for future reference. Symbol key Space key No Frame OK? Printing on 0.13" (3.5 mm) tape with invalid Frame setting
ON. (Select to print with no Frame, to cancel.)
WARNING What to do when...
Insert a tape cassette, making
• Always use the specified voltage and the suggested AC adapter (AD-24ES) for this
sure that it snaps into place. Problem Solution
machine to prevent any damage or failure.
• Unplug the power cord immediately and stop using the P-touch labeler during an End of tape The LCD shows one row of 12 characters; however, the text that you The display stays blank • Check that the batteries are correctly inserted.
electrical storm. There may be a remote risk of electric shock from lightning. after you have turned on • If the batteries are weak, replace them.
• Do not use the AC adapter in places of high humidity such as bathrooms. Toothed Wheel enter can be up to 80 characters in length. the machine. • Check that the AD-24ES adapter is correctly connected.
• Do not overload the power cord. When the label is • See "[Margin] (Tape Margin)" in this users guide and select
• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly bend Cutter's edge Initial Settings printed out, there is too
much margin (space) on
[Half] or [Narrow] to have smaller margins for your label.
or pull the power cord. When disconnecting the power cord from the power outlet,
always hold the plug. both sides of the text.
Start your machine The machine does not • Check that the tape cassette has been inserted correctly.
• To prevent fire or electric shock, make sure that the plug is fully inserted to the power
Supply power by using six AAA alkaline batteries or the optional AC adapter, and print, or the printed • If the tape cassette is empty, replace it.
outlet. Do not use an outlet that is loose.
Tape guide then press . characters are not • Check the tape compartment cover is properly closed.
• Do not get the machine/AC adapter/power plug wet, such as by handling them with
formed properly.
wet hands or spilling beverages on to them.
• Do not disassemble or modify the machine/AC adapter/batteries. Set the language (English/Español/Français/Hrvatski/Italiano/Magyar/ The setting has cleared • The batteries may be weak. Replace them.
• Disconnect the AC adapter, remove batteries and stop using immediately if you notice Nedrlnds/Norsk/Polski/Portug./Română/Slovenski/Slovensky/Suomi/ on its own. • When power is disconnected for more than two minutes,
Tape exit slot Svenska/ /Dansk/Deutsch) all text & formats in the display will be lost. Language, Unit
any abnormal odor, heat, discoloration, deformation or anything unusual while in use, and Time/Date settings will also be cleared.
or in storage. • Make sure that the end of the tape feeds under the tape guides. The default setting is "English".
• Do not use metallic articles, such as tweezers or a metallic pen, when exchanging the • If the ink ribbon is loose, use your finger to wind the toothed wheel in the A blank horizontal line • There maybe some dust on the print head. Remove the
appears through the tape cassette and use a dry cotton swab to gently wipe the
batteries. direction of the arrow on the cassette. > [ Language] > printed label. print head with an up-and-down motion.
• Do not throw into fire or heat up the battery. • Use only Brother TZ tapes with this machine.
Choose a language with and press . The machine has • Turn off the machine, and then while holding down
CAUTION Securely close the back cover, making
sure that it snaps into place. Set the unit (inch/mm)
"locked up" (i.e., nothing
happens when a key is
and , press to turn the machine back on.
pressed, even though Finally, release and .
• To avoid injuries, do not touch the blade of the cutter unit or any metal parts near the After you have installed the tape, feed the The default setting is "inch". the machine is on.) • Note: The text and formats in the display are erased. Also,
print head. tape (see Feeding) once and then push in the the language, Unit and Time/Date settings will be cleared.
• Do not apply excessive pressure to the cutter lever. > [Unit] >
tape cutter lever to cut the tape. The power turns off • The batteries may be weak. Replace them.
• Remove the batteries and disconnect the AC adapter if you do not intend to use the when you try to print. • Check that the batteries are correctly inserted.
machine for an extended period of time. (Note: When power is disconnected for more Choose unit with and press .
than two minutes, all text & formats in the display will be lost. Language, Unit and The tape does not feed • Check that the end of the tape feeds under the tape guides.
properly or the tape gets • The cutter lever is used while printing. Do not touch the
Time/Date settings will also be cleared.) Set Date (MM/DD/YY) and Time (hh:mm) stuck inside the machine. cutter lever during printing.
• Do not use old and new batteries together or mix alkaline batteries with other type Example: setting the clock to October 21st 2009, 10:30AM
batteries, or set the positive and negative end in the wrong position. Otherwise, the All text and format settings • Press and select [Txt&Format].
When using optional AC adapter (AD-24ES) need to be cleared to
batteries may leak or be damaged. > [TimeDate] > [Clock] . create a new label.
• To prevent damage or breakage, do not drop or hit the machine/AC adapter and press Insert the plug on the adapter cord into
To change language • See step 2 "Set the language" of the "Initial Settings".
on the LCD display. the adapter jack on the bottom end of Date (MM/DD/YY)
setting.
• Depending on the location, material, and environmental conditions, the label may the machine.
unpeel or become irremovable, the color of the label may change or be transferred to > > >
other objects. Before applying the label, check the environmental condition and the
Insert the plug into the nearest standard
electrical outlet.
Specifications
material. input “10” input “21” input “09”
• Any data stored in memory will be lost due to failure or repair of the P-touch labeler,
For memory back up, we recommend using
Time (hh:mm) Item Specification
or if the battery expires. AAA alkaline batteries (LR03) together
when using the AC adapter. Dimensions 4.3" (W) × 8.1" (D) × 2.3" (H)
> >
General Precautions input “10” input “30” Weight
(107.4 mm (W) × 202.6 mm (D) × 56.6 mm (H))
0.80 lbs. (365 g) (without batteries and tape cassette)
• Do not use the P-touch labeler in any way or for any purpose not described in this Power supply Six AAA alkaline batteries (LR03) or optional AC adapter
guide. Doing so may result in accidents or damage the machine. (AD-24ES)
• Use only Brother TZ tapes with this machine. Do not use tapes that do not have the Tape cassette Brother TZ tape (width) :
mark. Select AM/PM with and press . 0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm)
• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry
You can also confirm the figure and move to the next setting by using the right
cloth.
• Do not touch the print head with your fingers. Use a soft wipe (e.g. a cotton swab) cursor key. Accessories (Supplies may differ by distribution.)
when cleaning the print head. • The machine automatically turns off if no keys are pressed within 5
• Do not put any foreign objects into the tape exit slot or AC adapter connector, etc. minutes. Accessories Stock No.
• Do not place the P-touch labeler in direct sunlight or rain, near heaters or other hot Tape Cassettes See the included "Supplies and Accessories Guide".
appliances, dashboard or in the back of your car, in any location exposed to extremely • To cancel operations, press .
high or low temperatures, high humidity, or dusty locations. Standard operating AC Adapter AD-24ES
• To initialize the settings, turn off the machine and then while Cutter Unit TC-5 (replacement)
temperature range: 50°F to 95°F (10°C to 35°C).
• Do not try to print labels using an empty tape cassette in the P-touch labeler. Doing holding down and , press to turn the machine back
so will damage the print head.
If the cutter blade becomes blunt and the cutter stopper wear after repetitive
on. Finally, release and . use and the tape cannot be cut cleanly, replace with new cutter unit (stock no.
• Do not pull the tape being fed from the P-touch labeler, otherwise the tape cassette
or P-touch labeler may be damaged. TC-5) by obtaining from an authorized brother reseller.

[CREATING LABELS]

MAKING TEXT DESIGNING LABELS PRINTING LABELS COMPLETED LABELS

Switching Upper Case/Lower Case [Size] ( + ) Text Preview ( + )
Upper case ( ON) Lower case ( OFF) > [Size] > [Large] You can preview the text before printing.

[Large] [Medium] [Small] > [Preview]

• The LCD shows the whole text and the label length (inch/mm), then returns to the Peel the printed label from backing and apply the label.
Making Two Line Text Automatically adjusts the text size according to the tape width. original text.

USEFUL FUNCTIONS
• Only the text can be previewed, not the font, style, size, underline/frame or any
Move the cursor to where the second line starts and press . [Width] ( + ) additional features.

Use either 0.35" (9 mm) or 0.47" (12 mm) wide tape for two line text. Feeding (Tape Feed) ( + ) File (Memory) ( + )
Display Label image > [Width] > [×2]
[Normal] [×2] [×1/2] > [Feed]
You can save your original labels on to your machine. Up to nine labels can
be saved and recalled for printing whenever you desire. You can also edit and
overwrite the stored label.
Entering Symbols Printing
[Style] (Vertical) ( + ) > > [File] > >
>
> [Style] > [Vertical] To Save: > [Save] >
Group Symbols Group Symbols • To cut off the label, push in the tape cutter lever on the upper-right corner of the
[Normal] [Bold] [Outline] machine.
1 10 • To prevent damage to the tape, do not try to cut while the message "Print" or "Feed" To Print: > [Print] >
is displayed.
2 11 [Shadow] [Italic] [I+Bold](Italic Bold) • When Chain Print is set, "OK to Feed?" will appear. (See the Note of [Chain Prt] in
[Margin] (Tape Margin). ) To Open: > [Open] >
3 12
[Margin] (Tape Margin) ( + )
4 13 [I+Outl](Italic Outline) [I+Shadow](Italic Shadow) [Vertical] If you try to store a label when there is already a label stored to that
5 14 > [Margin] > [Full] number, a message “Overwrite?” will appear. Press to save your
new label. Press to cancel.
6 15 [Underline/Frame] ( + ) [Full]/[Half]/[Narrow] is for leaving equal margins on both sides of the text.
NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label. Time/Date Function ( + )
7 16 > [Undl/Frm] > [Undl] Full Half Narrow
You can insert the desired time and date to your text at the touch of a button.
8 17 [Off] [Undl](Underline) [Round] [Candy] ABC : ABC : ABC 8 Formats are available for printing time and date.
1" 1"
9 1/2" 1/2" 1/6" 1/6" You can change the number of time/date by changing the clock setting.

• To go to the next group, press .

[Callout] [Banner] [Wooden] [Chain Prt] (Chain Print) is for printing more than 1 copy of a label with min- To add Time/Date to your text:
imum margin <e.g. 1>. You can also create a label containing texts in various
• To cancel operations, press .
Frames can not be printed on 0.13" (3.5mm) tape. styles; enter a text in one style and press . After that, cancel feeding (see
Entering Accented Characters [Tab] ( + ) the note below), and enter the second text in another style <e.g.2>.
The cursor should be positioned where you wish to insert the time and date.
Chain Print
> > / > <e.g. 1> <e.g. 2> To select the format of Time/Date:
You can make aligned texts by setting tabs. ABC
Example: To set a tab between "ABC" and "D" ABC ABC ABC ABC DEF > [TimeDate] >
Accented Characters Accented Characters The cursor should be positioned where you set a tab. (feed & cut) (feed & cut)
A 0 1 2 3 4 5 6 7 8 9 a ” • – — ˜ ™ š › œ Ÿ > > [Tab]
C A B C c > ¡ ¢ • FEED THE TAPE BEFORE USING THE CUTTER OTHERWISE A
Display Label image PART OF THE TEXT MAY BE CUT OFF.
D E F d ¤ ¥ ¦
• After pressing , "OK to Feed?" will appear. Press to feed. Format (October Example
21st 2009, 3:30PM)
Format (October Example
21st 2009, 3:30PM)
E H I J K L M N O e ¨ © ª « ¬ ; ® ¯ ABC D
Tab
Press to cancel. M/D/Y 10/21/09 D.M.Y 21.10.09
G P Q g ° ± • Do not try to pull the tape since this may damage the tape cassette.
I S T U V W X Y i ³ ´ µ ¶ · ¸ ¹ [Tab Length](Auto / 0.0" - 4.0" (0-100mm)) ( + ) M/D/Y hm 10/21/09 03:30PM D.M.Y hm 21.10.09 03:30PM

Using [Print Option] ( + ) D/M/Y 21/10/09 Y-M-D 09-10-21

K [ k » D/M/Y hm 21/10/09 03:30PM Y-M-D hm 09-10-21 03:30PM
> [Tab Length] >
L \ ] ^ _ l ½ ¾ ¿ À [Copies]
N ` a b c n Â Ã Ä Å • You can also select the length by entering the length with Number keys. To change the Clock Setting:
You can print up to 9 copies of each label.
• To return to [Auto], press . See step 4 of the "Initial Settings".
O f g h i j k l m o Æ Ç È É Ê Ë Ì Í > [Print Option] > [Copies] >
R p q r r Ð Ñ Ò [Label Length](Auto / 1.2" - 12.0" (30-300mm)) ( + ) FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
S t u v w x s Ô Õ Ö × Ø This device may not cause harmful interference, and (2) this device must accept any interference received,
> [Length] > including interference that may cause undesired operation.
T z { | t Ú Û Ü You can also select the number of copies by entering with Number keys. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
U ‚ ƒ „ … † ‡ ˆ ‰ u à á â ã ä å æ ç • You can also select the length by entering the length with Number keys.
[Numbering] a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
Y ‹ Œ y é ê • To return to [Auto], press . installed and used in accordance with the instructions, may cause harmful interference to radio communications.
You can print many copies of the same text while increasing a selected However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
Z ‘ ’ “ z ì í î [Auto Format] ( + ) number by 1 after each label is printed. cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Example: To print copies of a label containing a serial number (0123, 0124 and 0125) - Reorient or relocate the receiving antenna.
• To cancel operations, press .
You can choose label length from six formats to create labels for various ap- - Increase the separation between the equipment and receiver.
• The order of accented characters differ by the selected LCD language. > > [Print Option] > - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
plications. - Consult the dealer or an experienced radio/TV technician for help.
To Clear > [A/F] > [VCR VHS] [Numbering] >
- Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s
authority to operate the equipment.
By pressing the Backspace Key, the letters will be deleted
Application Length Application Length
Select the highest number you wish to be printed when setting the number. Should you encounter any problems with your product, please do not return
one by one. your product to the store!
VCR VHS 5.5" (140mm) CD Spine 4.4" (113mm) [Mirror]
Mini DV 1.6" (42mm) File Tab 3.2" (82mm) After referring to the User's guide, if you still need assistance, call Brother
> [Txt&Format] . All text and settings will be Audio 3.5" (89mm) Divider 1.6" (42mm) > [Print Option] > [Mirror] > Customer Service at:
cleared. [Mirror Prt?] Voice: 1-877-BROTHER (1-877-276-8437) Web: www.brother.com
You can also use the Function shortcuts for these menu. Press the
Fax: 1-901-379-1210
and the shortcut key shown next to the menu title. To confirm,
> [Text Only] . Only text will be cleared. press . Use clear tape in [Mirror], so the labels can be read correctly from the oppo- If you need to locate a service center, please call
site side when attached on glass, windows or other transparent surfaces. 1-877-BROTHER (1-877-276-8437) or visit us at www.brother.com