NHD-14432WG-ATFH-V#T
Graphic Liquid Crystal Display Module
NHD- Newhaven Display
14432- 144 x 32 Pixels
WG- Display type: Graphic
A- Model
T- White LED Backlight
F- FSTN (+)
H- Transflective, 6:00 Optimal View, Wide Temperature
V#T- Built-in Positive Voltage
RoHS Compliant
Newhaven Display International, Inc.
2661 Galvin Ct.
Elgin IL, 60124
Ph: 847-844-8795 Fax: 847-844-8796
www.newhavendisplay.com
[email protected] [email protected]
Document Revision History
Revision Date Description Changed by
0 2/28/08 Initial Release -
1 4/5/10 User guide reformat BE
2 5/5/10 Updates BE
3 5/10/10 BLOCK DIAGRAM UPDATED BE
4 5/25/10 Contrast updated BE
5 6/7/13 Controller information added AK
6 2/10/17 Mechanical Drawing, Electrical & Optical Char. Updated SB
7 4/16/18 Backlight Characteristics Updated SB
8 3/25/20 Included Serial Interface Compatibility, Updated Wiring AS
Diagram + Pinout
Functions and Features
• 144x32 pixels
• Built-in ST7920-0C Controller
• +5.0V power supply
• 1/32 duty
• RoHS Compliant
[2]
1 2 3 4 5 6 7 8
SYMBOL REVISION DATE
A A
85.0 0.5
9.4 71.2
12.0 66.0(VA) 13.5(MAX)
11.3
10.0
60.44(AA)
2.5
14.78
5.4
8.9
B 16 15 B
A
36.0 0.5
13.4(AA)
16.0(VA)
144*32 DOTS
25.2
31.0
K
2 1 Pin Assignment
C C
45.0 1.6 1 Vss
2.5 80.0 4- 2.5 PTH 2 Vdd
2.5 4- 5.0 PAD LED B/L 3 V0
2.54 4 RS
5 R/W
6 E
7.84
D 7 DB0 D
8 DB1
(P2.54*8)
9 DB2
17.78
10 DB3
16- 1.0 PTH 11 DB4
0.42 12 DB5
16- 1.8 PAD
0.38 13 DB6
E 14 DB7 E
15 A
Notes: 16 K
1. Driving: 1/32 Duty STANDARD TOLERANCE:
0.38
(UNLESS OTHERWISE SPECIFIED)
0.42
2. Voltage: 5V VDD, 4.3V VLCD LINEAR: ±0.3mm DRAWING/PART NUMBER: REVISION:
3. Display Mode: FSTN Posi�ve / Transflec�ve
1.0
NHD-14432WG-ATFH-V#T SIZE:
A3
4. Op�mal View: 6:00
DRAWN BY: APPROVED BY:
UNLESS OTHERWISE SPECIFIED:
A. Shah A. Shah
SCALE:
- DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: APPROVED DATE:
3/24/20 3/24/20 NS
F F
5. Backlight: White LED - THIRD ANGLE PROJECTION
DO NOT SCALE DRAWING SHEET 1 OF 1
THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC.
6. Driver IC: ST7920-0C THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN
WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY.
1 2 3 4 5 6 7 8
Pin Description
Parallel Interface: (Default)
Pin No. Symbol External Connection Function Description
1 VSS Power Supply Ground
2 VDD Power Supply Supply Voltage for LCD and Logic (+5.0V)
3 V0 Adj. Power Supply Supply Voltage for Contrast (approx. +4.3V)
4 RS MPU Register Select: 1=Data, 0=Instruction
5 R/W MPU Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E MPU Operation Enable signal. Falling Edge Triggered.
7-14 DB0-DB7 MPU 8-Bit Bi-directional Data Bus
15 LED+ Power Supply Backlight Anode (32mA @ +3.5V)
16 LED- Power Supply Backlight Cathode (Ground)
Serial Interface:
Pin No. Symbol External Connection Function Description
1 VSS Power Supply Ground
2 VDD Power Supply Supply Voltage for LCD and logic (+5.0V)
3 V0 Adj. Power Supply Supply Voltage for contrast (approx. +4.3V)
4 /CS MPU Active LOW Chip Select signal.
5 SID MPU Serial Data Input
6 SCLK MPU Serial Clock
7-14 NC MPU No Connect. Tie to Ground.
15 LED+ Power Supply Backlight Anode (32mA @ +3.5V)
16 LED- Power Supply Backlight Cathode (Ground)
MPU Interface Jumper Selection
MPU Interface R10 (default) R11
Parallel (default) Short Open
Serial Open Short
Recommended LCD connector: 2.54mm pitch pins
Backlight connector: - Mates with: -
[4]
Wiring Diagram
[5]
Electrical Characteristics
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 ⁰C
Storage Temperature Range TST Absolute Max -30 - +80 ⁰C
Supply Voltage VDD - 4.5 5.0 5.5 V
Supply Current IDD VDD = 5.0V 1.6 2.5 3.5 mA
Supply for LCD (contrast) VLCD TOP = 25°C 4.1 4.3 4.5 V
“H” Level input VIH - 0.7 *VDD - VDD V
“L” Level input VIL - VSS - 0.6 V
“H” Level output VOH - 0.8 * VDD - VDD V
“L” Level output VOL - VSS - 0.4 V
Backlight Supply Current ILED - 10 32 80 mA
Backlight Supply Voltage VLED ILED = 32mA 3.4 3.5 3.6 V
*The LED of the backlight is driven by current; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level
stated.
Optical Characteristics
Item Symbol Condition Min. Typ. Max. Unit
Top ϕY+ - 30 - °
Optimal
Bottom ϕY- - 60 - °
Viewing CR ≥ 2
Left θX- - 45 - °
Angles
Right θX+ - 45 - °
Contrast Ratio CR - 2 5 - -
Rise TR - 150 200 ms
Response Time TOP = 25°C
Fall TF - 150 200 ms
Controller Information
Built-in ST7920-0C.
Please download specification at http://www.newhavendisplay.com/app_notes/ST7920.pdf
[6]
Table of Commands
[7]
[8]
Timing Characteristics
MPU write data to ST7920
[9]
MPU read data from ST7920
[10]
Built-in Font Table
Please see: http://www.newhavendisplay.com/app_notes/ST7920-0C_font.pdf
Example Initialization Program
//-------------------------------------------------------------------------------
#include <REG52.H>
#include "AL.h"
sbit ID = P3^0;
sbit RW = P3^7;
sbit E = P3^4;
//-------------------------------------------------------------------------------
void Init()
{
Wcom(0x38);
Wcom(0x0C);
Wcom(0x06);
Wcom(0x02);
Wcom(0x01);
delay(10);
Row = 0x80;
for(Counthi = 1; Counthi <=32; Counthi++)
{
Wcom(0x3E);
Wcom(Row);
Wcom(0x80);
for(Count = 1; Count <=40; Count++)
{
Wdata(0x00);
}
Row++;
}
}
//-------------------------------------------------------------------------------
void Wcom(char i)
{
P1 = i;
ID = 0; //Reset P3.0
RW = 0; //Reset P3.7
E = 1; //Set P3.4
delay(1);
E = 0; //Reset P3.4
}
//-------------------------------------------------------------------------------
void Wdata(char i)
{
P1 = i;
ID = 1; //Set P3.0
RW = 0; //Reset P3.7
E = 1; //Set P3.4
delay(1);
E = 0; //Reset P3.4
}
//-------------------------------------------------------------------------------
[11]
Quality Information
Test Item Content of Test Test Condition Note
High Temperature storage Endurance test applying the high storage +80⁰C , 200 Hrs. 2
temperature for a long time.
Low Temperature storage Endurance test applying the low storage -30⁰C , 200 Hrs. 1,2
temperature for a long time.
High Temperature Endurance test applying the electric stress +70⁰C , 200 Hrs. 2
Operation (voltage & current) and the high thermal
stress for a long time.
Low Temperature Endurance test applying the electric stress -20⁰C , 200 Hrs. 1,2
Operation (voltage & current) and the low thermal
stress for a long time.
High Temperature / Endurance test applying the electric stress +40⁰C , 90% RH , 96 Hrs. 1,2
Humidity Operation (voltage & current) and the high thermal
with high humidity stress for a long time.
Thermal Shock resistance Endurance test applying the electric stress -20⁰C,30min -> 25⁰C,5min ->
(voltage & current) during a cycle of low 70⁰C,30min = 1 cycle
and high thermal stress. 10 cycles
Vibration test Endurance test applying vibration to 10-55Hz , 1.5mm amplitude. 3
simulate transportation and use. 60 sec in each of 3 directions
X,Y,Z
For 15 minutes
Static electricity test Endurance test applying electric static VS=±800V, RS=330Ω, CS=150pF
discharge. 10 Times
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
[12]
