DWIN Smart Screen Naming Guidelines
DWIN Smart Screen Naming Guidelines
080
Comparison -
Description
2
W
Note 1
Note 2
Beijing DWIN Technology Co., LTD. Smart Screen Product Line Naming Rule
(Take DMT10768T080_A2WT as an example)
DWIN smart screen production line
Color code: T=65K Color(16-bit), G=16.7M/262K Color(24-bit/18-bit)
Lateral resolution: 32=320 48=480 64=640 80=800 85=854 10=1024 12=1280 13=1364 14=1440 19=1920
Longitudinal resolution: 240=240 480=480 600=600 720=720 768=768 800=800 108=1080 128=1280
Classification:
M or L=Consumer Grade
C=Commercial Grade
T=Industrial Grade
K=Medical Grade
Q=Automotive Grade
S=Harsh Environment Application
Y=Beauty Grade
F=COF Structure
Attribute Code:
“0”: Basic type
“1”: Basic type with shell
“2”: Analog video platform
“3”: System products (Android and Linux platform)
“4”: Digital video platform and system products
“A”: DGUSII kernel product
PS1
PS2
Shell
MS1
MS2
TN
EWTN
SFT
R4
R4AV
R5
R5AV
Touch Type CP
CG
GFF
CGAV
BT
RTC
FC
1G
2G
4G
8G
Memory 16G
4MB
8MB
16MB
32MB
Brightness A
TTL
232
Signal
interface TTL/232
485
232/485
TA
TC
Development
DGUS
mode
DGUSL
DGUS II
10P10F
40P05F
50P05F
6P25P
8P25P
User 8P20L
interface 8P20P
6P38P
8P38P
10P51P
2P20P
10P38P
Description
Indicates that this option is not supported.
The plastic shell suitable for indoor use, it may be deformed due to excessive
temperature or UV degradation when outdoor use.
The plastic shell suitable for indoor and outdoor use, undeformed at high or
low temperatures, and has UV protection.
The embedded smart screen wrapped in a stainless steel iron frame has a
structure similar to a bare screen.
The aluminum alloy shell, suitable for both indoor and outdoor environment.
Normal viewing angle TN process TFT display, the viewing angle is 70/70/50/70 (L/R/U/D).
Wide viewing angle TN process TFT display, the viewing angle is 75/75/75/75 (L/R/U/D).
IPS process TFT display, commonly known as hard screen, has high contrast,
good color reproduction, and wide viewing angle (typical value is 85/85/85/85).
SFT process TFT display, with high contrast, good color reproduction, wide
viewing angle (typical value is over 88/88/88/88).
4-wire RTP
4-wire RTP with anti-glare and anti-UV, it suitable for outdoor use.
5-wire RTP
5-wire RTP with anti-glare and anti-UV, it suitable for outdoor use.
G+P low-cost CTP
G+G CTP, it can adjust the sensitivity of the front tempered glass or acrylic panel.
G+FF CTP, it can adjust the sensitivity of the front tempered glass or acrylic panel.
G+G CTP with anti-glare and anti-UV, suitable for outdoor use. The sensitivity
can be adjusted with front tempered glass or acrylic panel.
Use CR3220 or CR1220 lithium electronic battery as RTC backup power source,
the battery needs to be replaced after the battery life is 1-5 years (depending
on the battery and the use environment).
Using farad capacitors as RTC backup power supply, it can last for about 30
days after power failure, and there is no service life problem.
Suffix A(for example ,the selection mark is 500A) indicates that the
brightness of the backlight can be automatically adjusted with the change of
the ambient brightness, which is mainly used for high-brightness products.
3.3V-5V level compatible with TTL/CMOS full-duplex UART interface, the highest
rate is 16Mbps.
A serial port provides RS232 and RS485, but cannot be used simultaneously.
10Pin_3.81mm socket
Max. Resolution
Category Model Picture Description Packing Qty.
DGUS TA
DGUS II ASIC,Dual
cores,built-in display
buffer,18bit RGB
ASIC T5L0 854*480 1024*768 1000
interface,Industrial
grade.
DGUS II ASIC,Dual
cores,built-in display
ASIC T5L2 1366*768 1920*1080 buffer,24bit RGB 1000
interface,Industrial
grade.
D
COB structure:
1.3 — IPS GFF DMG24240C013_03W D=32.4 240*240 150,200
1.6 — IPS GFF DMG40400C016_03W D=39.84 400*400 250
2.1 — IPS GF DMG48480C021_02W D=53.3 480*480 350
2.1 — IPS GF DMG48480C021_03W D=53.3 480*480 350,400
2.8 — IPS GFF DMG48480C028_03W D=70.1 480*480 300
COF structure:
1.6 — IPS GFF DMG40400F016_06W 39.84×39.84 400*400 50,250,300
2.1 — IPS GFF DMG48480F021_01W 53.28×53.28 480*480 50,350,400
Circular rotary screen with encoder shell:
1.28 PS1 IPS — DMG24240C013_13WN D=32.4 240*240 400
1.54 PS1 IPS — DMG24240C015_13WN D=26.8 240*240 —
2.1 PS1 IPS GFF DMG48480C021_13WTC D=53.28 480*480 350
Interface
Operating Operating Operating
Voltage Current Temperature Signal User Flash RTC Buzzer Speaker
(V) (mA) (℃) interface interface
Developme
Active Area
Size Shell LCD Type Touch Type nt Model
(mm)
mode
Note:
1.The backlight LED life (maximum brightness continuous work, brightness half time) is 10,000 hours, the screen with dot rate i
dot screen is not more than 3,and LCD screen without aging screening.
2.The LCD or touch screen may be damaged if it is used outdoors for a long time.
DWIN Technology Consumer Grade UART Screen Selection Guide
Interfa
Operating Operating Operating
Resolution Brightness
Voltage Current Temperature RTC Flash Signal
(H*V) (nit)
(V) (mA) (℃) interface
800*480 200 6-15 200mA@12V -20/+70 — 16MB TTL/232
800*600 250 6-15 220mA@12V -20/+70 — 16MB TTL/232
800*1280 250,300 7-15 300mA@12V -20/+70 — 16MB TTL/232
800*600 200,250 6-36 370mA@12V -20/+70 — 16MB TTL/232
,000 hours, the screen with dot rate is not more than 20%, the total number of bad spots (bright and dark spots) with
Interface
2K HD screen:
11.6 — IPS R4/GFF DMG19108C116_05W 257.3×145.2 1920*1080 150,200,250
13.3 — IPS GFF DMG19108C133_05W 293.8×165.2 1920*1080 250
14 — IPS R4/GFF DMG19108C140_05W 308.7×173.4 1920*1080 200,250,300
15.6 — IPS R4/GFF DMG19108C156_05W 343.2×192.6 1920*1080 200,250,300
17.3 — IPS R4/GFF DMG19108C173_05W 382.9×215.8 1920*1080 150,200,250
18.5 — IPS GFF DMG19108C185_05W 410.0×231.0 1920*1080 200,250
21.5 — IPS GFF DMG19108C215_05W 476.1×267.9 1920*1080 150
COF screen:
4.3 — IPS R4 DMG80480C043_06W 56.16×93.60 800*480 250,300
7 — TN R4 DMG80480C070_06W 154.08×85.92 800*480 200,250
With shell:
1.28 PS1 IPS — DMG24240C013_13WN D=32.4 240*240 400
1.54 PS1 IPS — DMG24240C015_13WN D=26.8 240*240 —
2.1 PS1 IPS GFF DMG48480C021_13WTC D=53.28 480*480 350
DMG48270C043_15WT
4.3 PS1 TV-TN R4 95.0×53.9 480*272 250
R
5 PS1 TN R4 DMG80480C050_15WTR 109.0×65.8 800*480 200
DMG80480C070_15WT
7 PS1 TN R4 154.1×85.9 800*480 200
R
10.1 PS1 IPS R4 DMG10600C101_15WTR 223.2×125.8 1024*600 250
Note:
1. The screen with dot rate is not more than 20%, the total number of bad spots (bright and dark spots) with dot screen is not mo
2. The LCD or touch screen may be damaged if it is used outdoors for a long time.
DWIN Technology Commercial Grade UART Screen Selection Guide
Interface
Operating Operating Operating
Voltage Current Temperature RTC Flash Signal User Speaker
(V) (mA) (℃) interface interface interface
— Circular screen
— T5L0,16M (flash can't be extended)
— IPS circular screen,T5L0-Q88
— T5L0
— IPS circular screen,T5L1
— IPS circular screen,T5L1
— T5L0
—
— IPS circular screen,T5L1
Yes T5L1
Yes T5L1
Yes
Yes Incell
Yes
Yes
—
— 5V,T5L0,8MB flash
Yes Horizontal screen with wide frame
Yes Vertical screen with narrow frame
Yes
— T5L0
Yes
Yes T5L2,incell
Yes Horizontal screen at factory
Yes
— 5V,T5L0
Yes
Yes MIPI interface,button cell,T5L2,horizontal screen at factory
— IPS,16M flash,RTC(SD2058),onboard loudspeaker
Yes
Yes
Yes Horizontal screen at factory
Yes Horizontal screen at factory
Yes
Yes
Yes
Yes
Yes onboard loudspeaker
Yes onboard loudspeaker
Yes 32MB flash,speaker interface,button cell
Yes onboard loudspeaker
Yes onboard loudspeaker
Yes 32MB flash,speaker interface,farad capacitor
Yes
Yes
Yes
T5L2 ASIC, Support FSK camera function (Without FSK interface at the
Yes factory, only reserved its circuit, need to customize to add FSK
interface) ,RX8130 RTC
Yes
Yes
Yes
— COF screen
— COF screen
Incell:
4.1 MS1 IPS Incell DMG72720T041_06WTC 73.98×73.98 720*720 400
5 MS1 IPS Incell DMG12720T050_06WTC 110.4×62.1 1280*720 250
With shell:
4.3 PS2 IPS R4/CG DMG80480T043_A5W 93.20×55.76 800*480 250
5 PS2 IPS R4/CG DMG80480T050_A5W 108.8×65.6 800*480 250,300
7 PS2 TN R4 DMG80480T070_A5W 154.20×85.88 800*480 250
7 PS2 IPS R4/CG DMG10600T070_A5W 154.20×85.88 1024*600 250
7 PS1 TN R4 DMG80480T070_15W 154.20×85.88 800*480 250
8 PS1 TN R4 DMG80600T080_15W 162.0×121.5 800*600 350
9.7 PS1 TN R4 DMG10768T097_15W 196.6×147.5 1024*768 250
10.1 PS2 IPS R4/CG DMG10600T101_A5W 222.7×125.3 1024*600 250
12.1 PS1 TN R4 DMG80600T121_15W 246.0×184.5 800*600 300
15 PS1 IPS R4 DMG10768T150_15W 304.13×228.10 1024*768 250
Note:
1. The backlight LED life (maximum brightness continuous operation, half brightness time) is 30,000 hours, the screen with dot ra
dark spots) with dot screen is not more than 3 and not in Active Area.
2. LCD screen after 30 days of aging selection, the whole machine after 72 hours of aging testing with power on before delivery.
3. DGUS II screen, PCB has been processed with conformal coatings.
DWIN Technology Industrial Grade UART Screen Selection Guide
Interface
Operating Operating Operating
Voltage Current Temperature RTC Flash Signal User
(V) (mA) (℃) interface interface
4.5-5.5 210mA@5V -20/+70 FC 16MB TTL/232 10P10F
4.5-5.5 360mA@5V -20/+70 FC 16MB TTL/232 10P10F
4.5-5.5 180mA@5V -20/+70 FC 16MB TTL*2 10P10F
6-36 118mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 135mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 130mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 200mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 186mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 210mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 160mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 240mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 220mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 250mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 265mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 320mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 295mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 300mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 470mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 280mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 215mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 170mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 290mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 260mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 440mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 — -20/+70 FC 32MB TTL/232 8P20P
6-36 390mA@12V -20/+70 FC 16MB TTL/232 8P20P
6-36 510mA@12V -20/+70 FC 32MB TTL/232 8P20P
6-36 — -20/+70 FC 32MB TTL/232 8P20P
12-36 685mA@12V -20/+70 FC 16MB TTL/232 8P20P
12-36 1100mA@12V -20/+70 FC 32MB TTL/232 8P20P
12-36 730mA@12V -20/+70 FC 32MB TTL/232 8P20P
7-15 160mA@12V -20/+70 — 16MB TTL 50P05F
7-15 200mA@12V -20/+70 — 16MB TTL 50P05F
0 hours, the screen with dot rate is not more than 10%, the total number of bad spots (bright and
Note:
1. The backlight LED life (maximum brightness continuous work, brightness half time) is 30,000 hours, the screen has no bad spot
2. LCD screen after 30 days of aging selection, the whole machine after 72 hours of 50℃ environmental high temperature aging.
3. EMC special processing, can meet the CE Class B standard, conformal coatings. and other special processing.
DWIN Technology Medical Grade UART Screen Selection Guide
Interface
Operating Operating Operating
Voltage Current Temperature RTC Flash Signal User
(V) (mA) (℃) interface interface
4.5-5.5 300mA@5V -20/+70 FC 16MB TTL/232 10P10F
6-36 260mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
4.5-5.5 190mA@5V -20/+70 FC 16MB TTL*2 10P10F
6-36 130mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 180mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 180mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 240mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 240mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 280mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 330mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 320mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 600mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 220mA@12V -10/+50 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 430mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 340mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
7-36 510mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
7-30 460mA@12V -20/+70 FC 16MB 232*2+485*1 8P20P+2P20P
12-36 930mA@12V -20/+70 FC 32MB 232*2+485*1 8P20P+2P20P
ours, the screen has no bad spots (bright and dark spots).
mental high temperature aging.
cial processing.
Interface
Brightnes
Touch Active Area Resolutio
Size Shell LCD Type Model s
Type (mm) n(H*V)
(nit)
Note:
1.Outdoor use is supported. LED lifetime is more or less than 30,000 hours.
2.The LCDs produced in the factory will have 30 days aging test and 72 hours of 50° C high-temperature aging test. Special treatm
application protection.
h Environment Grade UART Screen Selection Guide
Interface
Operating Operating Operating
Voltage Current Temperature RTC Flash Signal User
(V) (mA) (℃) interface interface
4.5-5.5 180mA@5V -40/+85 FC 16MB 232*2+485*1 10P10P+2P20P
6-36 160mA@12V -40/+85 FC 16MB 232*2+485*1 8P20P+2P20P
6-36 250mA@12V -40/+85 FC 16MB 232*2+485*1 8P20P+2P20P
7-36 430mA@12V -40/+85 FC 32MB 232*2+485*1+CAN*1 10P38P
12-36 330mA@12V -40/+85 FC 32MB 232*2+485*1 8P20P+2P20P
12-36 500mA@12V -40/+85 FC 16MB 232*2+485*1 8P20P+2P20P
12-36 360mA@12V -40/+85 FC 32MB 232*2+485*1 8P20P+2P20P
12-36 630mA@12V -40/+85 FC 32MB 232*2+485*1 8P20P+2P20P
12-36 380mA@12V -40/+85 FC 16MB 232*2+485*1 8P20P+2P20P
12-36 630mA@12V -40/+85 FC 32MB 232*2+485*1 8P20P+2P20P
12-36 820mA@12V -40/+85 FC 32MB 232*2+485*1 8P20P+2P20P
12-36 890mA@15V -40/+85 FC 32MB 232*2+485*1 8P20P+2P20P
erature aging test. Special treatment for ESD, vibration resistance, conformal coating, outdoor
Interface
Note:
1.Long-time outdoor use is not supported. LED lifetime is more or less than 10,000 hours
Beauty Grade UART Screen Selection Guide
Interface
Brightnes Operating Operating Operating
s Voltage Current Temperature RTC Flash Signal User
(nit) (V) (mA) (℃) interface interface
Note:
1. COF is the best choice for customers who are dedicated in simple application products with the features of light and structure,
DWIN Technology COF Screen Selection Guide
Interface
Operating Operating Operating
Voltage Current Temperature Flash Signal User
(V) (mA) (℃) interface interface
T5L0
T5L0,WTC=black,WTCZ01=white,WTCZ02=Integrated black
T5L0,WTC=black,WTCZ01=white,WTCZ02=Integrated black
T5L0,WTC=black,WTCZ01=white
T5L0,WTC=black,WTCZ01=white
T5L0,WTC=black,WTCZ01=white,WTCZ02=Integrated black
T5L0,WTC=black,WTCZ01=white,WTCZ02=Integrated black
T5L0,WTC=black,WTCZ01=white,WTCZ02=Integrated black
T5L0
T5L0,WTC=black,WTCZ01=white
16M Bytes Flash
T5L2,WTC=black,WTCZ01=white,WTCZ02=Integrated black
T5L0,WTC=black,WTCZ01=white
T5L1,WTC=black,WTCZ01=white
T5L2,WTC=black,WTCZ01=white,WTCZ02=Integrated black