1 Client CC Energy Development S.A.

L- Oman PMS A01E

2 Project Development Projects Size 1/2'' - 6''
3 Location EPFs & CPFs Tag Number BA010110
4 Title: Data Sheet of Ball Valve
DESIGN FEATURES Rev Vendor
COMPLIANCE
Column (Note-11)
5 Pressure / Temperature Rating : ASME CL150#
6 Valve Type : Ball valve
7 Specification / Code: BS 5351/ ISO 17292, API 6D / ISO 14313 ,ASME B16.34,
Description: Floating Ball Type, Split Body, End Entry, Reduced Bore, Soft Seated, Bolted
Bonnet, Anti-blow out stem & with Antistatic device ,Fire-Safe design
8 ,Renewable Seats.
9 Design Temperature Range Minus 29 Deg.C to plus 120 Deg.C
10 Design Pressure: ASME B16.34 (Material Group 1.1)
11 Sour Service Requirements Yes, NACE MR-0175 / ISO 15156
GENERAL REQUIREMENTS
12 Face to Face Dimensions: ASME B16.10
13 End Connections: Flanged, Raised Face, Smooth-Finish (Ra =3.2-6.3 µ meter) ,ASME B16.5
14 Operation: Lever OPTD.
MATERIAL OF CONSTRUCTION
15 Body & Bonnet: ASTM A216-WCB / A105-N + Note-12
16 Stem / Trunnions:- SS316 / SS316L ; A182 F316 / F316L + Note-7
17 Seat & Ball / Gates/ Disc/ Plates: Seat: PTFE & Ball :A182-F316 / F316L (Note-7)
18 Seat Inserts: Not Applicable
19 Springs: Not Applicable
20 Seals: Viton-GLT
21 Stem Packing: Viton-GLT / Graphite
22 Gaskets / Body Seals: Manufacturer's Std. (Note-4)
23 Body, Bonnet & Gland Boltings: ASTM A193-B7M & A194-2HM + HDG (ASTM A123/ A153)
PRESSURE TESTING & ACCEPTANCE CRITERIA
Pressure Testing: API 598 / BS 6755 Part-1 / ISO14313; Acceptance : Rate "A": with minimum duration as A2
24 stipulated in CCED Std.Spec. (Doc # JS1006-X-P07-1502_A2)
25 Hydrostatic Testing : Body / Shell : 29 Barg ; Seat : 21 Barg
26 Pneumatic Seat Testing (Low Pressure 6 Barg
27 Back Seat: Not Applicable
MATERIAL INSPECTION CERTIFICATION
28 Pressure Containing & Controlling Type 3.1- EN10204
29 Non Pressure Containing Parts Type 2.2-EN10204 (including fasteners , gaskets & seals , etc.)
30 Fire safe Design Certification As per API 607 / API.6FA / BS-6755 Part-2
31 NACE compliance certification NACE MR-0175 / ISO 15156 , Refer Note-6
ADDITIONAL MANDATORY REQUIREMENTS
External Painting / Coating As per CCED Std. (PCS-1, Doc No# JS1006-X-G02-0003)
OR
32 Manufacturer's STD + Note-10
33 Non-Destructive Examination Refer CCED Std. Specification Doc # JS1006-X-P07-1502_A2 A2
34 Marking MSS-SP-25 / API 6D (Including Tag # )
35 Packing & Shipment As per CCED Std. Specification (Doc.No# JS1006-X-G02-0001)
Locking facility Required , Refer Note-9
SERVICE CONDITION
36 Applicable Piping Class "A01E" ; Refer PMS (Doc.No. JS1006-X-P07-1500)
37 Criticality of Service Normal Fluid Category -Sour Service
Nature of Fluid Acid Gas, Acid Oil, Crude Oil, Combustion Air, Diesel Oil,Flare,Fuel Gas, Oily Drain,
38
Stabilized Oil, Utility Air and Utility Nitrogen.
39 Corrosion Allowance 3 mm for Carbon Steel
MANDATORY PURCHASE NOTES
1 This data sheet shall be read in conjunction with CCED Specification for Valv es A2
Doc # JS1006-X-P07-1502_A2. In case of conflict b/w this data sheet & specification most stringent
40 requirement shall be applicable by default.
41 2 Valves shall be fully pressure rated for the full design temperature range.
42 3 Asbestos is not acceptable for seals or gaskets.
43 4 Manufacturer's standard shall mean a standard product that is suitable for all services/ conditions.
44 5 Valves shall be fully operable at all design conditions.
45 6 All wetted parts shall be compliant with NACE MR-0175 / ISO 15156.
7 All Austenitic Stainless steel shall be dual certified to type SS316 & SS316L & supplied in solution annealed
46 condition.
8 Size < 2 NPS shall be designed as per BS-5351 or ISO 17292; ≥ 2 NPS shall be designed as per API 6D /
47 ISO.14313
48 9 Size ≥ 2 NPS shall be designed to lock the valve in the fully open & closed position.
49 10 Subject to COMPANY's approval prior to start fabrication. Min.DFT shall not be less than 200 microns . A2

50 11 Supplier / Manufacturer to duly fill the compliance column (including Notes ) and endorse this Data Sheet.
This is the mandatory requirement to consider the Bid / Quote for Technical Evaluation. On compliance to
this requirement will lead to rejection of bid from technical evaluation phase.
51 12 All Carbon Steel castings & forgings shall be supplied in normalized condition.
A2
A1
22/02/20
01/02/2017
DATA SHEET FOR FLGD BALL VALVE
DATA SHEET FOR FLGD BALL VALVE SS XX AT
K Mirza
KHM IAD
Prepared By Reviewed by Checked By Approved By Approved By
Rev. Date Description
(VEC) (VEC) (CCED) (CCED) (CCED)

Job No. JS1022 Rev.

BALL VALVE
Tag Number
Class150#
CC ENERGY
(Sour Rated) BA010110 A2
DEVELOPMENT S.A.L Sheet 4 of 52