DOCUMENT NO.

DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ

16.0 CONTINUITY ANALYSIS (Reference: Books by B.C.Punmia)

GENERAL INPUT DATA FOR ( Top Dome, B1 (Top beam) , Wall)

Inner diameter of Tank,D (m) = 9.000 m Thickness of Top dome = 125 m
c/c Diameter of staging shaft,Do (m) = 6.1 m DL and LL of Top dome = 4.595 kN/m2
Height of Cylindrical wall, h (m) = 4.4 m Thickness of Cylin wall at top= 0.2 m
Depth of Conical dome, ho (m)= 1.45 m Thickness of Cylin wall at Bottom= 0.2 m
Rise of bottom dome h2 (m) = 1.2 m Thickness of Cylin wall = 0.2 m
No. of columns = 6 m Dia of wall = 9.00 m
Freeboard (m) = 0.35 m Ht of cylin wall = 4.4 m
unit wt of water = 10 kN/m3 unit wt of water = 10 kN/m3
Unit wt of concrete = 25 kN/m3 Depth of top ring beam = 0.3 m
Concrete grade = 30 Mpa Width of top ring beam = 0.3 m
E (Mpa) = 27386.13 Mpa Central rise = 1.300 m
Effective cover = 55 mm Radius of dome = 8.44 m
σcbc = 10 σst 130 Mpa Semi-central angle Φ1 (deg) = 32.23
J 0.86 Meridian trust (Top Dome) = 21.010 kN
m 9.33
Fe 500
Es 205000

For (B3 Middle beam, Conical wall) For ( B2 Bottom beam, Bottom dome)
radius of Beam = 4.70 m Width of ring beam = 0.6 m
Width of ring beam = 0.4 m Depth of ring beam = 0.90 m
Depth of ring beam = 0.3 m Thk of bottom dome = 0.3 m
Hoop tension at top OF Conical wall = 313.76 kN Radius of bottom dome R0= 3.101 m
Hoop tension at bottom Conical wall = 313.76 kN Central rise of dome = 1.2 m
Dia of conical wall at top = 9.20 m Theta θ = 79.59
Thk of conical wall = 0.3 m cos theta = 0.18
Dia of conical wall at bottom = 6.10 m sin theta = 0.98
Total vertical load on middle ring beam = 46.41 kN/m Net force = 26.05 kN/m
angle Φ = 45.00 degree
Vertical load on conical wall = 181.39 kN/m
inclined length of conical wall = 2.05 m
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
(1) Effects of continuity at the junction of top-dome, ring beam (B1) and cylindrical portion:
(a) Membrane deformations and stiffnesses:

(i) Top dome:

w (kN/m2) = 4.60 R (m) = 9.00 t1 (m) = 125.00 Φ1 (deg) = 32.23

Slope at left edge,Ψd (rad) = 1.28856001596079E-08 ψd = ((2w*R*sinθ)/(E*t1))

Hori. outward defln δd (m) = -1.76E-08 δd = ((wR2sinθ)/(Et1))((1/(1+cosθ))-cosθ)
α1 = 0.35
α1= 3(R1/t1)2
K1 = -1.25 K1 = 1- (cotΦ1/2α1)
Moment stiffness, M (kN-m/m/radian) = -358274120683.19 M = (E*R*t1)/(4α13)*(K1+(1/K1))
Radial force, H/unit length (kN-m/rad) = -20658442158.78 H/unit length = ((E*t1)/(2*α12*K1*sinθ))
Thrust stiffness,H (kN/m/unit movement)= -3039795317.73 H = ((E*t1)/(α1*R*K1*sin2θ))
Moment,M/unit length (kN-m/unit disp.)= -20658442158.78 M/unit length = ((E*t1)/(2*α12*K1*sinθ))
(ii) Top ring beam:
Depth,d (m) = 0.30
Width,b (m) = 0.30
Radial thrust to cause unit outside defln,H(kN/m)= H = Ebd/R2
121716.12
Moment per unit circumference to cause unit rotation of M = ((Ebd3)/(12R2))
beam,M(kN-m/m)= 912.87

(iii) Cylindrical wall:

thickness, T(m)= 0.20
D (m) = 9.00
Maxm. Hoop tension at base (kN/m ht.) = 198.00 w * H * (D/2)
α= 1.39 α = (12/(D2T2))(0.25)
Z= 18257.42 Z = ET3/12
Moment stiffness, M (kN-m/m) = 50655.71 M = 2αZ
Outward thrust,H(kN/m/rad.)= 70272.84 H = 2α2Z
Thrust stiffness, H (kN/m) = 194973.93 H = 4α3Z
Corresponding moment, M (kN-m/m) = 70272.84 M = 2α2Z
Membrane displacement at bottom = 0.000162673599579034 = PR/TE
slope of wall (radian) = 3.69712726315987E-05
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
(b) Reaction due to continuity at joint:
Member Clockwise slope Inward Displacement
Top dome ψ -1.28856001596079E-08 δ -1.76377644125823E-08
Tank wall ψ -3.69712726315987E-05 δ -

Member Clockwise moment M

1) Dome -358274120683.19 ψ 0*-358274120683.19= 4616.58
-20658442158.78 δ 0*-20658442158.78= 364.37
2) Beam 912.87 ψ
3) Wall 50655.71 ψ -0.000037*50655.71= -1.87
-70272.84 δ
5) Total (Eq__1) -358274069114.60 ψ -20658512431.62 δ 4979.07

Member Inward thrust H

1) Dome -20658442158.78 ψ 0*-20658442158.78= 266.20
-3039795317.73 δ 0*-3039795317.73= 53.62
2) Beam 121716.12 ψ
3) Wall -70272.84 ψ -0.000037*-70272.84= 2.60
194973.93 δ
4) Reaction due to
thrust from dome 17.77
5) Total (Eq__2) -20658512431.62 ψ -3039478627.68 δ 340.18

Solve Eq 1 and 2
ψ = net rotation = 1.22413465071408E-08
δ = net displacement = 2.8720169172022E-08

Member M (kN-m)
Dome =((-358274120683.19*0)+4616.577067)+((-20658442158.78*0)+364.37) 1.874
Beam =912.87*0 0.000
Wall =((50655.71*0)+-1.87)+(-70272.84*0) -1.874
Sum =1.874+0+-1.874 0.000
Member H (kN)
Dome =((-20658442158.78*0)+266.2)+((-3039795317.73*0)+53.62) -20.38
Beam =121716.12*0 0.00
Wall =((-70272.84*0)+2.6)+(194973.93*0) 2.60
Sum =-20.38+0+2.6 -17.77
Member Net hoop tension(kN/m)
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
Dome =-((0*27386.13*1000)/(9/2))*125 -21.85
Beam =-((0*27386.13*1000)/(9/2))*(0.3*0.3) -0.02
Wall =-((0*27386.13*1000)/(9/2))*0.2 -0.03

Design of Top Dome Design of Tank Wall

Factored Bending at edge due to moment = 2.811 kN m Factored Hoop tension at top = -0.05 kN
Ast req due to bending = 0.05 mm2 Hoop Steel req= -0.13 mm2
Ast req due to Factored hoop tension = -81.93 mm2 Providing on both face = -0.07 mm2
Provide 10 mm at 150 mm C/C Provide 10 mm 200 mm C/C 10 mm 200 mm C/C
Ast Provided = 523.60 mm2 OK Avg spacing 100
Ast Provided = 785.40 mm2 OK
Design Ring Beam RB3 (Top Beam) BM -2.811 kN m
Factored Hoop tension = -0.02 kN Ast req -44.37 mm2
Ast req = 0.06 mm2 Provide 10 mm 200 mm C/C 10 mm C/C 200 mm C/C
Provide 10 mm 2 Nos Avg spacing 160 mm Ast Provided = 785.40 mm 2
OK

Ast Provided = 157.08 mm2 OK

BM is very negligible so neglect

Crack width in mature concrete

acr (mm) Fs (N/mm2) Permisible fc N/mm2 Permisible e1-e2 w(mm) Permisible Remark
Dome 91.05 -41.73 < 400 0.000 < 2.46 -1.16475 -318.141 < 0.2 OK For Tension
Beam 95.00 -0.10 < 400 0.000 < 2.46 -0.00280 -0.797 < 0.2 OK For Tension
Tank Wall 73.10 -0.04 < 400 0.000 < 2.46 -0.00124 -0.272 < 0.1 OK For Tension

acr (mm) x (mm) Fs (N/mm2) Permisible e1-e2 w(mm) Permisible

Tank Wall 95.00 31.63 17.75 < 400 -0.00069 -0.1333 < 0.2 OK For Bending
Dome 91.05 21.09 0.03 < 400 -0.58243 -158.9941 < 0.2 OK For Bending

(2) Effects of Continuity at the Junction of Cylindrical Portion, Beam B3 and Conical Dome:
(a) Membrane Deformations and Stiffnesses
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
(i) Ring Beam B3
Width (m) = 0.40
Depth (m) = 0.30
Radial thrust to cause unit outward deflection, H(kN/m) = 148770.27 H = Ebd/R2
Radial moment to cause unit rotation of beam, M (kN-m/m) = 1115.78 M = Ebd3/12R2
(ii) Conical dome:
Hoop tension,top,T1(kN) = 313.76
Hoop tension,bottom,T1(kN) = 313.76
Outward defln δ,top(m) = 0.0001757 =(HTTop X DTop)/(E X Thk X 2)
Outward defln δ0,bottom(m)= 0.0001165 =(HTBot X DBot)/(E X Thk X 2)
Meridional thrust,T2(kN) = 65.63 T2Top=W1 X sec Φ
Slope at top edges,ψ(rad.) = -5.98185853406531E-05 Ψ = (-tanΦ/Et)*(2T2(top)+T1(top))
Meridional thrust,T2(kN)= 256.52 T2Bot=W2 X secΦ
Slope,bottom edges,ψ= -0.000110 Ψ = (-tanΦ/Et)*(2T2(bot)+T1(bot))
Inclined length of conical wall, l (m) = 2.05
L' (m) = 4.31 L' = RcosecΦ
L (m) = 6.36 L = l+L'
Δ= 3.40 Δ = (12*cot2Φ/t2)0.25

COEFFICIENTS FOR CONICAL DOME

Z K1 K2=K3 K4 Z' K1' K2'=K3' K4'
10 183.0 25.20 6.79 10 169 23.55 7.30
11 220.5 27.25 7.21 11 237 29.35 7.90
12 288.0 32.60 7.91 12 312 36.0 8.70
13 366.5 38.40 8.60 13 396 42.20 9.40
14 463.0 46.20 9.36 14 490 48.85 10.09
15 568.5 52.50 10.10 15 596 56.30 10.82
16 696.0 60.30 10.82 16 728 63.20 11.42
17 834.0 68.40 11.52 17 880 72.30 12.13
18 990.0 76.65 12.24 18 1038 81.20 12.97
19 1172 86.00 12.98 19 1222 89.70 13.61
20 1370 95.90 13.69 20 1430 100.0 14.30
21 1574 105.6 14.39 21 1658 111.0 15.10
22 1830 116.3 15.10 22 1900 121.0 15.70
23 2100 127.8 15.88 23 2190 134.0 16.50
24 2400 139.9 16.45 24 2470 145.0 17.16
25 2695 175.0 17.24 25 2800 156.9 17.80
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
Moment and thrust stiffness at top:
Z= 17.14 Z = 2ΔL0.5
K1 = 856.56 From aboveTable
K2=K3 = 69.59 From aboveTable
K4 = 11.62 From aboveTable
Moment stiffness, M = 118854.00 =(E t K4 L) / ((K1 K4 - K2 K3) Tan2Φ
Corresponding thrust, H = 158127.64 =(E t K2) / ((K1 K4 - K2 K3) SinΦ TanΦ
Thrust stiffness, H = 432501.66 =(E t K1) / ((K1 K4 - K2 K3) L Sin2Φ
Corresponding moment, M = 158127.64 .
Moment and thrust stiffness at bottom:
Z' = 14.11 Z' = 2ΔL' 0.5
K1' = 502.16 From aboveTable
K2'=K3' = 49.70 From aboveTable
K4' = 10.17 From aboveTable
Moment stiffness, M = 136654.60 =(E t K4' L) / ((K1'K4' - K2' K3') Tan2Φ
Corresponding thrust, H = 218897.35 =(E t K2') / ((K1' K4' - K2' K3') SinΦ TanΦ
Thrust stiffness, H = 725079.74 =(E t K1') / ((K1' K4' - K2' K3') L Sin2Φ
Corresponding moment,M= 218897.35 =(E t K3') / ((K1' K4' - K2' K3') SinΦ TanΦ

(b) Reaction due to continuity at joint:

Member Clockwise slope Inward Displacement
Cyl Wall ψ -3.69712726315987E-05 δ 0.000162673599579034
Beam B3 ψ δ
Coni Dome ψ 5.98185853406531E-05 δ 0.000175674794088405

Member Clockwise Moment M

(1) Wall 50655.71 ψ =-0.000037*50655.71 -1.87
70272.84 δ =0.000163*702 11.43
(2) Beam B3 1115.78 ψ
(3) Conical dome 118854.00 ψ =0.00006*118854 7.11
-158127.64 δ =0.000176*-158127.64 -27.78
(4) Balcony moment
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
5) Total (Eq__3) 170625.49 ψ -87854.80 δ -11.11

Member Inward Thrust H

(1) Wall 70272.84 ψ =-0.000037*70272.84 -2.60
194973.93 δ =0.000163*194973.93 31.72
(2) Beam B3 148770.27 δ
(3) Conical dome -158127.64 ψ =0.00006*-158127.64 -9.46
432501.66 δ =0.000176*432501.66 75.98
(5) Water pressure on B3 13.20
(6) Thrust from conical dome 46.41
7) Total (Eq__4) -87854.80 ψ 776245.86 δ 155.25

Solve Eq 3 and 4
ψ = net rotation = -4.02060023459335E-05
δ = net displacement = -0.000204551162168332

Member M (kN-m)
Wall =((50655.71*-0.00004)+-1.87)+((70272.84*-0.000205)+11.43) -6.85
Beam B3 =1115.78*-0.00004 -0.04
Coni.dome =((118854*-0.00004)+7.11)+((-158127.64*-0.000205)+-27.78) 6.90
Member H (kN)
Wall =((70272.84*-0.00004)+-2.6)+((194973.93*-0.000205)+31.72) -13.59
Beam B3 =(148770.27*-0.000205) -30.43
Coni.dome =((-158127.64*-0.00004)+-9.46)+((432501.66*-0.000205)+75.98) -15.59
Member Net hoop tens(kN/m)
Wall =-((-0.000205*27386.13*1000)/(9/2))*0.2 248.97
Beam B3 =-((-0.000205*27386.13*1000)/(9/2))*(0.4*0.3) 149.38
Coni.dome =-((-0.000205*27386.13*1000)/(9/2))*0.3 373.46

Design of Tank Wall Design Ring Beam RB2 (Middle ring beam)
Factored Hoop tension at Bottom = 373.46 kN Factored Hoop tension = 224.07 kN
Hoop Steel req= 933.64 mm2 Ast req = 560.19 mm2
Providing on both face = 466.82 mm2 Provide 12 mm 8 Nos 0 mm 0 Nos
Provide 12 mm 125 mm C/C 12 mm 125 mm C/C Avg spacing 36.25
Avg spacing 62.5 Ast Provided = 904.78 mm2 OK
Ast Provided = 1809.56 mm2 OK
BM 10.278 kN m BM = 0.07 kN m
Ast req 166.21 mm2 Ast req = 0.25 mm2
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
Provide 10 mm 200 mm C/C 0 mm 200 mm C/C Provide 12 mm 8 Nos 0 mm 0 Nos
Ast Provided = 392.70 mm2 OK Ast Provided = 904.78 mm2 OK
Avg spacing 200 Avg spacing 155.00
Design Conical dome
Factored Hoop tension at top 560.19 kN BM = 10.35 kN m
Ast req = 1400.47 mm 2
Ast req 97.77 mm2
Providing on both face = 700.23 mm2 Provide 16 mm 200 mm C/C 0 mm 200 mm C/C
Provide 16 mm 175 mm C/C 16 mm 175 mm C/C Ast Provided = 1005.31 mm2 OK
Avg spacing 87.5 Avg spacing 200
Ast Provided = 2297.85 mm2 OK

Crack width in mature concrete

acr (mm) Fs (N/mm2) Permisible fc N/mm2 Permisible e1-e2 w(mm) Permisible Remark
Wall 62.54 138.00 < 400 1.245 < 2.46 0.00013 0.025 < 0.2 OK For Tension
Middle RB 57.64 165.10 < 400 1.245 < 2.46 0.00016 0.027 < 0.2 OK For Tension
Con Dome 68.70 162.52 < 400 1.245 < 2.46 0.00016 0.032 < 0.2 OK For Tension

acr (mm) x (mm) Fs (N/mm2) Permisible e1-e2 w(mm) Permisible

Wall 111.62 15.82 124.88 < 400 -0.0010 -0.212 < 0.2 OK For Bending
Middle RB 450.48 36.44 0.21 < 400 -0.0009 -0.303 < 0.2 OK For Bending
Con Dome 498.59 40.49 29.64 < 400 -0.0007 -0.222 < 0.2 OK For Bending
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
(3) Effects of continuity at the junction of conical dome, beam B2 and bottom dome:
(a) Membrane Deformations and Stiffnesses
(i) Ring beam B2
b (m) = 0.60
d (m) = 0.90
Radius of shaft,R0 (m) = 3.05
Moment stiffness, M (N-m/radian) = 429228.43 M = (bd3E)/(3R02)
Corresponding H (N/radian) = 715380.71 H = (bd2E)/(2R02)
Thrust stiffness H (N/unit movement) = 1589734.92 H = (bdE)/(R02)
Corresponding M (N-m/unit movement) = 715380.71 M = (bd2E)/(2R02)
(ii) Bottom dome
Thickness t2 (m) = 0.30
Radius of Dome R0(m) = 3.10
UDL due to s.wt., p (kN/m2) = 7.50
UDL due to wt of water above crown level, p' (kN/m ) =
2
46.50
Slope,ψ = -5.94361386851989E-06 ((2wR Sinθ)/(Et ))-((wR 2Sinθ)/(Et )
0 2 0 2
δ= -4.46412263735738E-05 ((pR2sinθ)/(Et ))((1/(1+cosθ))-cosθ)]-(p'R2sinθ)/(2Et )+(wR3sinθ)/(6Et2(1+cosθ)))(2cosθ+cosθ-3)
2 2
α2 = 4.231 (3(R /t ))0.25
0 2
α22 = 17.904
α23 = 75.757
K2 = 0.978 1-((1/2α2) cotθ)
Moment stiffness M (N-m/m/rad) = 168195.21 ((E R2 t)/(4 α23)) ((K2 + (1/K2))
Corresponding H (N/m/radian) = 238459.42 (E t2)/((2 α22 K2 Sinθ
Thrust stiffness H/unit displacement = 661634.47 (E t2)/((α2 R0 K2 Sin2θ)
Corresponding moment M (N-m/m unit displ.) = 238459.42 (E t2)/((2 α2 R0 K2 Sinθ)
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
(b) Reaction due to continuity at joint:
Member Clockwise slope Inward Displacement
Coni Dome ψ 0.000110277065132343 δ 0.000116480026515138
Beam B2 ψ δ
Bottom dome ψ 5.94361386851989E-06 δ -4.46412263735738E-05

Member Clockwise moment M

(1) Conical wall 136654.60 ψ =0.00011*136654.6= 15.07
218897.35 δ =0.000116*218897.35= 25.50
(2) Beam B2 429228.43 ψ
-715380.71 δ
(3) Bottom dome 168195.21 ψ =0.000006*168195.21= 1.00
238459.42 δ =-0.000045*238459.42= -10.65
4) Total (Eq__5) 734078.24 ψ -258023.94 δ 30.9

Member Inward thrust H

(1) Conical wall 218897.35 ψ =0.00011*218897.35= 24.14
725079.74 δ =0.000116*725079.74= 84.46
(2) Beam B2 -715380.71 ψ
1589734.92 δ
(3) Bottom dome 238459.42 ψ =0.000006*238459.42= 1.42
661634.47 δ =-0.000045*661634.47= -29.5
4) Net thrust from both domes -26.05
5) Total (Eq__6) -258023.94 ψ 2976449.12 δ 54.4

Solve Eq 5 and 6
ψ = net rotation = -5.00763550781109E-05
δ = net displacement = -2.26271966019824E-05
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
Member M (kN-m)
Conical dome =((136654.6*-0.00005)+15.07)+((218897.35*-0.000023)+25.5) 28.77
Beam B2 =(429228.43*-0.00005)+(-715380.71*-0.000023) -5.31
Bottom dome =((168195.21*-0.00005)+1)+((238459.42*-0.000023)+-10.65) -23.46
Member H (kN)
Conical dome =((218897.35*-0.00005)+24.14)+((725079.74*-0.000023)+84.46) 81.23
Beam B2 =(-715380.71*-0.00005)+(-0.000023*1589734.92) -0.15
Bottom dome =((238459.42*-0.00005)+1.42)+((661634.47*-0.000023)+-29.54) -55.03
Member Net hoop tension(kN/m)
Conical dome =-((-0.000023*27386.13*1000)/(6.1/2))*0.3 60.95
Beam B2 Negligible
Bottom dome =-((-0.000023*27386.13*1000)/(6.1/2))*0.3 60.95

Design Conical dome

Factored Hoop tension at bottom 91.43 kN Meridinal thrust 256.52 kN
Ast req = 228.57 mm2 Thk available at end 0.30 m
Providing on both face = 114.28 mm2 Tensile stress (M/Z)-(P/A) = 1.06 N/mm2
Provide 16 mm 175 mm C/C <3.6 N/mm2
Thk provide at end OK
Ast Provided = 1148.93 mm 2
OK
Design Ring Beam RB1 (Bottom ring beam) Design of Bottom Dome
Radial BM 191.55 kN m Meridinal thrust 98.09 kN
Moment due to Membrane analysis = 0.00 kN.m Thk available at end 0.30 m
Total Moment = 287.33 kN m Tensile stress (M/Z)-(P/A) = 1.24 N/mm2
Ast req 803.28 mm2 <3.6 N/mm2
Provide 20 mm 5 Nos Thk provide at end OK
Avg Spacing 98
Ast Provided = 1570.80 mm2 OK Factored Hoop tension = 91.43 kN
Spacing of Bar 326.67 mm Ast req = 228.57 mm2
 DOCUMENT NO. DATE
PROJECT: CUTTACK
32126-WSE-ESR-CV-DD-41 29-Jun-22
DESIGNED CHECKED
STRUCTURE: ESR 41 OSTIA 310KL 5m
AS MJ
Provide 10 mm at 200 mm C/C
10 mm at 200 mm C/C from shaft
Ast Provided = 785.40 mm2 Avg spacign 100 mm C/C

Crack width in mature concrete

acr (mm) Fs (N/mm2) Permisible fc N/mm2 Permisible e1-e2 w(mm) Permisible Remark
Coni dome 99.82 53.05 < 400 0.203 < 2.46 -0.00101 -0.30 < 0.2 OK For Tension
Bottom Dome 73.10 77.61 < 400 0.203 < 2.46 -0.00148 -0.33 < 0.2 OK For Tension

acr (mm) x (mm) Fs (N/mm2) Permisible e1-e2 w(mm) Permisible

Coni dome 55.00 46.28 109.08 < 400 0.00002 0.004 < 0.2 OK For Bending
Bottom Dome 70.10 31.63 127.42 < 400 0.00066 0.124 < 0.2 OK For Bending
Ring Beam 167.79 63.27 4.10 < 400 -0.00165 -0.654 < 0.2 OK For Bending