Scribd
Upload
37 views6 pages

Cyhct C2TV

This document provides information about a Hall Effect current sensor including its product characteristics, applications, electrical data, accuracy specifications, pin definitions, connection methods, and application notes. The sensor measures DC current with excellent accuracy and linearity and can be used for applications such as power equipment and machine tools.

Uploaded by

erenturkoglu42
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views6 pages

Cyhct C2TV

This document provides information about a Hall Effect current sensor including its product characteristics, applications, electrical data, accuracy specifications, pin definitions, connection methods, and application notes. The sensor measures DC current with excellent accuracy and linearity and can be used for applications such as power equipment and machine tools.

Uploaded by

erenturkoglu42
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Version 4

Released in September 2022


Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co KG

Split Core Hall Effect DC Current Sensor CYHCT-C2TV


This Hall Effect current sensor is based on open loop principle and designed with a split core and a high
galvanic isolation between primary conductor and secondary circuit. It can be used for measurement of DC
current etc. The output of the transducer reflects the real wave of the current carrying conductor.

Product Characteristics Applications


 Photovoltaic equipment
 Excellent accuracy
 Frequency conversion timing equipment
 Very good linearity
 Various power supply
 Light in weight
 Uninterruptible power supplies (UPS)
 Less power consumption
 Electric welding machines
 Window structure
 Numerical controlled machine tools
 Electrically isolating the output of the transducer
 Electrolyzing and electroplating equipment
from the current carrying conductor
 Electric powered locomotive
 No insertion loss
 Microcomputer monitoring
 Current overload capability
 Electric power network monitoring

Electrical Data/Input
Primary Nominal Primary Current DC Output Voltage Part number
DC Current Ir (A) Measuring Range Ip(A) (V) (see application notes on page 4)
25A 0 ~ ±25A CYHCT-C2TV-U/B025A-xnC
30A 0 ~ ±30A CYHCT-C2TV-U/B030A-xnC
40A 0 ~ ±40A x=0: 0-4V ±1.0% CYHCT-C2TV-U/B040A-xnC
50A 0 ~ ±50A x=3: 0-5V ±1.0% CYHCT-C2TV-U/B050A-xnC
100A 0 ~ ±100A x=8: 0-10V ±1.0% CYHCT-C2TV-U/B100A-xnC
200A 0 ~ ±200A CYHCT-C2TV-U/B200A-xnC
300A 0 ~ ±300A CYHCT-C2TV-U/B300A-xnC
400A 0 ~ ±400A CYHCT-C2TV-U/B400A-xnC
500A 0 ~ ±500A CYHCT-C2TV-U/B500A-xnC
600A 0 ~ ±600A CYHCT-C2TV-U/B600A-xnC
(n=2, Vcc= +12VDC; n=3, Vcc =+15VDC; n=4, Vcc =+24VDC, U: unidirectional, B: bidirectional)
(Connector: Molex connector C=M; Phoenix Connector: C=P, Cable connection: C=S)

Supply Voltage: Vcc=+12V, +15V, +24V 5%


Current Consumption Ic < 25mA
Isolation Voltage 2.5kV, 50/60Hz, 1min
Output Voltage at Ir, TA=25°C: Vout =0- 4V, 0-5V, 0-10VDC
Output Impedance: Rout < 150
Load Resistor: RL > 10k
Accuracy
Accuracy at Ir, TA=25°C, X <1.0% FS
Linearity from 0 to Ir, TA=25°C, EL <1.0% FS
Electric Offset Voltage, TA=25°C, Voe <50mV
Magnetic Offset Voltage (Ir 0) Vom <20mV
Thermal Drift of Offset Voltage, Vot <±1.0mV/°C
Thermal Drift (-10°C to 50°C), T.C. < 0.1% /°C
Response Time at 90% of IP (f=1k Hz) tr < 1ms
Frequency Bandwidth (-3dB), fb = DC - 20 kHz
Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100
D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com
Version 4
Released in September 2022
Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co KG

Case Material: PBT


Ambient Operating Temperature, TA = -25°C ~ +85°C
Ambient Storage Temperature, TS =-40°C ~ +100°C

PIN Definition and Dimensions

Current
direction

OFS
OFS GIN
GIN 端子 接线

+G OG
+ +24V

G 地

7.5 1(+):O 输出
Vcc
2(G):G GND
地
3(O): Output
4(G): GND

OFS: Offset Adjustment GIN: Gain Adjustment

Connection

Vcc: +12V, +15V, +24VDC

GND

CYHCT-
C2TV Output
Vo V
GND
o

Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100


D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com
Version 4
Released in September 2022
Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co KG

Cable Connection

Red: Vcc: +12V, +15V, +24VDC

Blue: GND

CYHCT-
C2TV Yellow: Output
Vo V
Black: GND
o

Wire Arrangement:

Red: Vcc: +12V, +15V, +24VDC


Blue: GND (ground)
Yellow: Vo (Voltage output)
Black: GND (ground)

Notes:
1. Connect the terminals of power source, output respectively and correctly, never make wrong
connection.
2. Two potentiometers can be adjusted, only if necessary, by turning slowly to the required accuracy with
a small screwdriver.
3. The best accuracy can be achieved when the window is fully filled with bus-bar (current carrying
conductor).
4. The in-phase output can be obtained when the direction of current of current carrying conductor is the
same as the direction of arrow marked on the transducer

Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100


D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com
Version 4
Released in September 2022
Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co KG

Application Notes

1) Part number CYHCT-C2TV-U/BxxxA-xnC

U: unidirectional input current; B: bidirectional input current; xxx: current value; x: output voltage (x=0: 0-4V
±1.0%; x=3: 0-5V ±1.0%; x=8: 0-10V ±1.0%); n: power supply (n=2, Vcc= +12VDC; n=3, Vcc =+15VDC;
n=4, Vcc =+24VDC,); C: Connector (Molex connector C=M; Phoenix Connector: C=P)

Example 1: CYHCT-C2TV-U100A-32M Hall Effect DC Current sensor with


Output signal: 0 – 5V DC
Power supply: +12V DC
Rated input current: 0 - 100A DC (unidirectional)
Connector: Molex connector

Example 2: CYHCT-C2TV-B100A-84P Hall Effect DC Current sensor with


Output signal: 0 – 10V DC
Power supply: +24V DC
Rated input current: -100A - 0 - +100A DC (bidirectional)
Connector: Phoenix connector

2) Relation between Input current and output signal

Current Sensor CYHCT-C2TV-U100A-32M


Input current (A) Output voltage Vo (V)
0 0
25 1.25
50 2.5
75 3.75
100 5

Current Sensor CYHCT-C2TV-B100A-84P


Input current (A) Output voltage Vo (V)
-100 0
-75 1.25
-50 2.5
-25 3.75
0 5
25 6.25
50 7.5
75 8.75
100 10

Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100


D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com
Version 4
Released in September 2022
Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co KG

DIN Rail Adapter CY-DRA88

The DIN Rail Adapter CY-DRA88 is designed for mounting the sensor on 35mm DIN Rail. It has
the size 70 x 24 x 23mm. The height from bottom to mounting surface is 14.8mm.

14.8

35.5

Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100


D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com
Version 4
Released in September 2022
Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co KG

Mounting of Sensors

Sensor with Molex Connector


(The distance between the bottom und the middle of hole is 54.8mm)

Sensor with Phoenix Connector


(The distance between the bottom und the middle of hole is 54.8mm)

Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100


D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com

You might also like