V1000
Hydraulic Control Valves
The V1000 Control Valves are the economical choice for residential, Operating Guidelines
commercial, and small agricultural irrigation systems. The V1000
Maximum Pressure Rating: 10 bar
Control Valve can be used to control blocks with flows up to 25 cubic
Operating Pressure Range: 0,5-10 bar
meters per hours.
All the V1000 Control Valves are designed with a manual throttling Product Information
knob to provide extra flexibility to control pressure and flow. The
Manual /Electric
V1000 Control Valve body cover and diaphragm piston assembly are
Manual Throttling
constructed of glass-filled nylon to meet rough conditions. The valve
Glass-filled Nylon Construction
body design includes a full-bore seat with unobstructed flow path,
Full Bore Seat
providing low head loss in high flow conditions. The electric valve
control circuit is internal (2-way circuit) providing some significant 2-Way Internal or 3-Way External Controls
benefits such as no external tubes or accessories. Tubing and Fittings: Plastic
Configuration Options - V1000 Hydraulic Control Valves
Actuation Options Pre-Set Pressure On-Off Pressure Reducing
(bar) Manual Electric Manual Electric
Control Circuit /Pilot No Pilot
0,8-6,5 bar, 3-Way 2,5
Solenoid 9 Volt DC - Latch
12 Volt DC - Latch
24 Volt AC - Normally Closed
Model Options - V1000 Hydraulic Control Valves
Basic Electric Pressure Reducing Pressure Reducing, Electric
1"-2" Models 1"-2" Models 1½"-2" Models 1"-2" Models
Flow Chart
V1000 Basic m3/h
Flow Chart - V1000 Hydraulic Control Valves
1.0
In-Line
0.8 1” (25 mm)
0.6
2” (50 mm)
0.5
0.4
1½” (40 mm)
0.3
Pressure Loss (bar)
2” (50 mm Angle
0.2
0.15
0.1
.08
.06
.05
.04
1 1.5 2 3 4 5 6 8 1 0 15 20 30 40 50 60 80
Angle
Flow Rate (m3/h)
Note: Added Head loss for 2-Way circuit (for "V" below 2 m/s): 0.3 bar
Dimensions (mm) and Weights - V1000 Hydraulic Control Valves
1" In-Line 1 1/2" In-Line 2" In-Line 2" Angle
(25 mm) (40 mm) (50 mm) (50 mm)
L 110 160 170 85
H 115 180 190 210
R 22 35 38 60
W 78 125 125 125
Weight (kg) 0.35 1.00 1.10 0.91
This literature has been compiled for worldwide circulation and the descriptions, photos, and information are for general purpose use only. Please consult with an irrigation specialist and technical specifications for proper
use of John Deere Water products. Because some products are not available in all regions, please contact your local dealer for details. John Deere Water reserves the right to change specifications and the design of all
products without notice. John Deere’s green and yellow color scheme, the leaping deer symbol and John Deere are trademarks of Deere & Company.
DS_V1000_R2_ENG_W13_0003 www.JohnDeereWater.com
