OSHA Electrical Safety Inspection
Workplace Name/Location
Date of Inspection Inspector's Name
INSTRUCTIONS:
This checklist is designed to ensure compliance with OSHA's Electrical Safety Standards (29 CFR 1910.301-399) to prevent electrical hazards in the
workplace. Carefully review each item and mark the corresponding checkbox to indicate compliance or note any observations and areas for improvement.
Use the "Notes/Observations" section to provide additional details, corrective actions, and any required follow-up.
GENERAL ELECTRICAL SAFETY
Electrical Panels: Verify that electrical panels are accessible and properly labeled. Yes No NA
Working Clearances: Ensure there are adequate working clearances around electrical equipment. Yes No NA
Lockout/Tagout: Check if lockout/tagout procedures are followed during maintenance. Yes No NA
Observations / Notes /
Corrective actions, if any:
ELECTRICAL EQUIPMENT
Equipment Condition: Inspect electrical equipment for signs of damage or wear. Yes No NA
Grounding: Verify that electrical equipment is properly grounded. Yes No NA
Equipment Maintenance: Ensure that electrical equipment is properly maintained. Yes No NA
Observations / Notes /
Corrective actions, if any:
EXTENSION CORDS AND TEMPORARY WIRING
Proper Use: Check if extension cords are used properly and not as a substitute for permanent wiring. Yes No NA
Temporary Wiring: Verify that temporary wiring is used safely and for the intended duration. Yes No NA
Overloading: Ensure that extension cords are not overloaded with excessive electrical loads. Yes No NA
Observations / Notes /
Corrective actions, if any:
ELECTRICAL OUTLETS AND RECEPTACLES
Outlet Condition: Inspect electrical outlets for damages or loose connections. Yes No NA
GFCIs: Verify the presence and proper functioning of Ground Fault Circuit Interrupters (GFCIs) in wet areas. Yes No NA
Outlet Covers: Ensure that all unused outlets have appropriate covers. Yes No NA
Observations / Notes /
Corrective actions, if any:
ELECTRICAL WIRING
Wiring Inspection: Inspect electrical wiring for damages or exposed wires. Yes No NA
Wiring Routing: Check if wiring is properly routed and protected from potential damage. Yes No NA
Overheating: Look for signs of overheating or burning around electrical wiring. Yes No NA
Observations / Notes /
Corrective actions, if any:
ELECTRICAL PPE (PERSONAL PROTECTIVE EQUIPMENT)
PPE Assessment: Check if workers are provided with appropriate electrical PPE. Yes No NA
PPE Use: Ensure workers use the required PPE when working on electrical systems. Yes No NA
PPE Condition: Verify the condition and fit of electrical PPE. Yes No NA
Observations / Notes /
Corrective actions, if any:
ELECTRICAL SAFETY TRAINING
Training Records: Review training records to ensure employees have received proper electrical safety training. Yes No NA
Electrical Hazards: Verify that employees understand electrical hazards and safety procedures. Yes No NA
Qualified Personnel: Ensure that only qualified personnel perform electrical work. Yes No NA
Observations / Notes /
Corrective actions, if any:
OVERCURRENT PROTECTION
Circuit Breakers and Fuses: Inspect circuit breakers and fuses for proper operation. Yes No NA
Overcurrent Protection Devices: Verify that overcurrent protection devices are correctly sized. Yes No NA
Circuit Overloading: Ensure that circuits are not overloaded beyond their rated capacity. Yes No NA
Observations / Notes /
Corrective actions, if any:
ADDITIONAL NOTES / OBSERVATIONS
[Insert any additional notes or electrical safety checklist observations made during the inspection]
STATEMENT OF INSPECTION
I hereby certify that I have conducted the above OSHA electrical safety checklist inspection and that the workplace is in compliance with OSHA's
Electrical Safety Standards. Any identified issues have been documented, and necessary corrective actions have been recommended.
Inspector's Name : Signature :
Date :
APPROVED BY
Name : Signature :
Date :
Inspec�on template by:
Digitize your Audits & Inspections through Safetymint
Get started with a free trial at www.safetymint.com
