Sandvik QH440 cone crusher

Technical specification sheet

The QH440 is a tracked, self contained cone crusher with an on • The machine is designed for ease of mobility, for rapid set up
board diesel engine. time and transportation.
• The QH440 is fitted with the CH440 Sandvik cone which has
• The chassis is constructed from a heavy duty ‘I’ beam to ensure a choice of six concaves and a CSS range of 8mm to 48mm
maximum durability. allowing a feed size of up to 215mm
• Heavy duty, hydraulically positioned feed conveyor with wear • Capable of up to 388 TPH.
resistant liners. • 8 available bush settings to give an eccentric throw range from
• Up and over metal detector to provide ultimate cone protection 16mm to 44mm.
from tramp material. • Capable of operating in the most hostile environments with a
• Automated variable speed feed conveyor to ensure maximum 50°C ambient temperature capability with just a lubrication oil
production, reduction and shape. change.
• Remote camera viewing thecrushing chamber ensures full • This flexibility makes the Sandvik cone crusher one of the
visibility without the need to access the crusher. most versatile tracked machines on the market to suit the most
• Fitted with four jacking legs for additional stability during arduous application requirements.
operation and to assist with maintenance.
• 13 litre diesel engine with direct drive to ensure maximum
power delivery and fuel efficiency.
 Technical specifications

QH440 QH440
Feed Hopper Main Conveyor

Nominal Capacity 6.3 m³ / 8.25 yds³ Belt Width 1200 mm / 47”

Nominal Capacity with Extensions 8.4 m³ / 11 yds³ Belt Length 21600 mm / 70’ 10”

Rear Loading Height 3531 mm / 11’ 7” Discharge Height 3734 mm / 12’ 3”

Rear Loading Height (door 3105 mm / 10’ 2” Head Drum Diameter 371 mm / 14 ½”
lowered)
Tail Drum Diameter 265 mm / 10 ½”
Rear Loading Width 2626 mm / 8’ 7 ½”
Drive Hydraulic
Rear Loading Width with 3759 mm / 12’ 4”
Extensions Motor cc 630cc / 38.5 cu inch

Feed Conveyor Tracks

Hopper Thickness 10 mm / ⅜” Length (Centres) 3715 mm / 12’ 2”

Wear Resistant Hopper Liners 10 mm / ⅜” Width (Shoe) 500 mm / 19 ¾”

Belt Width 1200 mm / 47” Drive Hydraulic/Gearbox

Belt Length 13150 mm / 43’ 2” Control Radio/Umbilical

Incline Angle 22° Powerpack

Drive Hyd Engine Stage 3A / Tier 3 CAT C13 Acert or

Stage 3B / Tier 4i CAT C13 Acert
Gearbox 31:1
Engine Power 328 kW / 440 hp
Torque 8000 Nm
Diesel Tank Capacity 990 litres / 262 US Gal
Head Drum Diameter 371 mm / 14 ½”
Hyd Tank Capacity 990 litres / 262 US Gal
Tail Drum Diameter 265 mm / 10 ½”
General Tech Data
Motor 80cc / 4.9 cu inch
Transport Dimensions
Metal Detector Type Bridge Coil
Length 16.99 m / 55’ 9”
Crusher
Width 2.99 m / 9’ 10”
Type Sandvik CH440
Height 3.8 m / 12’ 5 ½”
Speed 320 rpm
Cubic Volume 193 m³ / 6816 ft³
Feed Opening 215 mm / 8 ½”
Transport Weight 50,080 kg / 110,400 lbs
CSS Range 8 - 48 mm / 5/16” - 1 ⅞”
Operating Dimensions
Std Chamber Kit EC
Length 16.04 m / 52’ 7”
Chamber Options F-MF-M-MC-C
Width 3.34 m / 10’ 11 ½”
Std Bush Settings 32,36,40,44 mm / 1¼, 1⅜, 1½, 1¾”
Height 4.93 m / 16’ 2”
Drive PT Tech 14” Wet Clutch with PTO
Operating Weight 50,080 kg / 110,400 lbs
Drive Belts 2 sets of 5 banded belts
Performance
Crusher Weight 14,300 kg / 31,526 lbs
Max Feed Size 215mm / 8 ½”
Lubrication Tank
Capacity (up to) 388 tph / 435 stph
Capacity 250 litres / 66 US Gal
Travel Speed 1.3 km/h / 0.8 mph

SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
Fixed Displacement Flow Meter Yes
Max Incline 20°
Hyd Driven Oil Cooler Yes
Max Incline (Side to Side) 10°

Note. All weights and dimensions are for standard units only (full diesel tank)

Options
C chamber kit Main conveyor level sensor (stockpile monitor)
MC chamber kit Lighting mast and cabinet lights
M chamber kit Remote diesel pump (electric)
MF chamber kit Pull stop cords on the main conveyor
F chamber kit Water pump (hydraulic)
Hydraulic folding hopper side wall extensions for rear loading Overband magnet
Central autolube (all bearings) Engine filter kit - 250 hours (air and oil filters - for 3A engines only)
Arctic package -20°C (-4°F) (32 Grade hydraulic oil, engine oil and 100 Grade Plant and engine filter kit - 500 hours (3A engine)
lubrication oil) Plant and engine filter kit - 500 hours (3B engine)
Arctic package -30°C (-22°F) (arctic hydraulic oil, engine oil, 100 Grade lubrication Intelligent line multi-machine communication
oil and webasto coolant heater)
Tropical package (220 grade lubrication oil)
© Sandvik Mining and Construction Oy 2011

The units depicted show all options currently available, and the colour scheme reflects the eventual scheme to be used. Current models may differ from those featured in this brochure. Please contact Sandvik to
clarify specification and options. The material in this brochure is of general application for information and guidance only, and no representation or warranty is made or given by the manufacturer that its products will
be suitable for a customer’s particular purpose and enquiry should always be made of the manufacturer to ensure such suitability. Whilst reasonable efforts have been made in the preparation of this document to
ensure its accuracy. The manufacturer assumes no liability resulting from errors or omissions in this document, or from the use or interpretation of the information contained herein. The manufacturer reserves the
right to make changes to the information in this brochure and the product design without reservation and without notification to users.
S A N D V I K C O N S T R U C T I O N M O B I L E C R U S H E R S A N D S C R E E N S LT D
H E A RT H C OT E R OA D S WA D L I N C OT E D E R BY S H I R E D E11 9 D U E N G L A N D
T E L + 4 4 ( 0)1283 212121 FAX + 44 (0 ) 1283 217342 inf o.mobilecs@sand vik . c o m w w w. c o n s t r u c t i o n . s a n d v i k . c o m