0% found this document useful (0 votes)

255 views33 pages

BanesworE Structural Drawings Commercial11 - 21

Uploaded by

UMESH LAMICHHANE

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

255 views33 pages

BanesworE Structural Drawings Commercial11 - 21

Uploaded by

UMESH LAMICHHANE

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 33

STRUCTURAL DRAWINGS

COMMERCIAL BUILDING, BANESHWOR - 10, KATHMANDU

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1
CLIENT: MRS. BINITA BHAT
73'-9"
18'-3" 18'-3" 17'-6" 13'-2" 5'-10"

Y GENERAL NOTES
1. These drawings indicate in general
D the projects in terms of Architectural
design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
D required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
X X
on the plans and in the field, and be
19'-6"

20mmØ bars @150mm at top and bottom responsible for any adjustments and
correction.

16'-0"
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick

20mmØ bars @150mm at top and bottom

face.
5. Only written dimensions in all cases
shall be followed.
40'-3"

6. Architectural drawings must always

C C be read in conjunction with all other

37'-11"
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
clarification and verification.
16'-0"

16'-0"
LIFT
PIT

B B REMARKS
3'-8"

...................................................................

5'-5"
...................................................................
...................................................................
A A ...................................................................
Y
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2" 1'-3"
...................................................................
73'-9"

5 4 3 2 1
STRUCTURAL DRAWING
MAT FOUNDATION REINFORCEMT PLAN SCALE: 3/32" = 1'-0"

SHEET NUMBER ST1

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1
CLIENT: MRS. BINITA BHAT
68'-9"
18'-3" 18'-3" 17'-6" 13'-2"

GENERAL NOTES
C3
C4 1. These drawings indicate in general
C C2 the projects in terms of Architectural
C2 design intent with the dimensions of
C2 the building. As indicated, the
C contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
on the plans and in the field, and be
19'-6"

responsible for any adjustments and

correction.

16'-0"
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
face.
37'-1"

5. Only written dimensions in all cases

C4 C2 C5 C4 C2 shall be followed.

33'-4"
6. Architectural drawings must always
B B be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
clarification and verification.
16'-0"

16'-0"
C3 C1 C3 C2 C1
A A REMARKS
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2" ...................................................................
...................................................................
68'-9"

5 4 3 X
2 1
STRUCTURAL DRAWING
TYPICAL COLUMN LAYOUT PLAN
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST2

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

COLUMN REBAR DETAILS

CLIENT: MRS. BINITA BHAT
COLUMN NAME BASEMENT to 2ND FLOOR REMAINING FLOOR STIRUPPS

GENERAL NOTES

1'-8"

1'-8"
1. These drawings indicate in general
1'-8" 1'-8" the projects in terms of Architectural
design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
1'-8"

1'-8"
all dimensions and conditions. both
on the plans and in the field, and be
1'-8" 1'-8"
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
face.
1'-8"

1'-8"
5. Only written dimensions in all cases
shall be followed.
1'-8" 1'-8" 6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
clarification and verification.
1'-8"

1'-8"

1'-8" 1'-8"
1'-8"

1'-8"

REMARKS
...................................................................
1'-8" 1'-8" ...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................

STRUCTURAL DRAWING
SCALE: 3/16" = 1'-0"

SHEET NUMBER ST3

OCTOBER 2021
N

B C D
COMMERCIAL BUILDING
39'-2" BANESHWOR - 10, KATHMANDU

3'-8" 16'-0" 19'-6"

CLIENT: MRS. BINITA BHAT

GENERAL NOTES
1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
13' - 0" the building. As indicated, the
contractor shall furnish all items
20mmØ bars @150mm 20mmØ bars @150mm
required for the proper execution and
20mmØ bars @150mm 20mmØ bars @150mm completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
on the plans and in the field, and be
h = 3'

responsible for any adjustments and

correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4" THICK P.C.C
2.5" THICK FLAT BRICK SOLING

4. All interior dimensions are given

from rough brick face to rough brick
face.
RAFT X - SECTION ALONG Y-Y 5. Only written dimensions in all cases
shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
5 4 3 2 1 reported to the engineer for
clarification and verification.

73'-0"

18'-3" 18'-3" 17'-6" 13'-2" 5'-10"

REMARKS
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
20 mmØ bars @150mm 20mmØ bars @150mm
...................................................................
20mmØ bars @150mm 20mmØ bars @150mm
h=3'

STRUCTURAL DRAWING
SCALE: 1/8" = 1'-0"
4" THICK P.C.C
2.5" THICK FLAT BRICK SOLING

RAFT X - SECTION ALONG X-X

SHEET NUMBER ST4
OCTOBER 2021
N

6'-0"x6'-6"x5' Lift Pit COMMERCIAL BUILDING

16mmØ bars @150mm horizontal bar 16 mmØ bars 7'-6" BANESHWOR - 10, KATHMANDU
@150mm Horizontal bar
9" 9" 9" 9"
20mmØ bars @125mm 6' CLIENT: MRS. BINITA BHAT

9" thick shear wall 25mmØ @125mm Vertical bar for small leg

9"
20mmØ bars @150mm 20mmØ bars @150mm

20mmØ bars @150mm 20mmØ bars @150mm GENERAL NOTES

20 mmØ @125mm
1. These drawings indicate in general
the projects in terms of Architectural
Ld Ld design intent with the dimensions of
Ld Ld Ld Ld the building. As indicated, the
contractor shall furnish all items

6'-6"
8'-0"
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
12mmØ @150mm horizontal bar
all dimensions and conditions. both
20mmØ @125mm
on the plans and in the field, and be

9"
Ld Ld responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
Ld Ld and spacing of all beams, columns,
Note: provide shear legs slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
SECTION OF LIFT PIT face.
5. Only written dimensions in all cases
shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
clarification and verification.
7'-6" 7'-6"
9" 9" 9" 9"
6' 6'
20mmØ @125mm Vertical bar for small leg 16mmØ @125mm Vertical bar for small leg
9"

9"
REMARKS
...................................................................
16 mmØ @125mm 16 mmØ @125mm ...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
6'-6"

6'-6"
8'-0"

8'-0"

Note: provide shear legs Note: provide shear legs

STRUCTURAL DRAWING
SCALE: 3/16" = 1'-0"

SHEET NUMBER ST5

OCTOBER 2021
N

COLUMN C1 COLUMN C1
20mmØ @125mm Vertical bar 16 mmØ @125mm Vertical bar
1'-8"
7'-11"
1'-8"
7'-11"
COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

1'-8"

1'-8"
9"

9"
20mmØ @150mm Horizontal bar 10 mmØ @150 mm Horizontal bar
CLIENT: MRS. BINITA BHAT

20mmØ @125mm Vertical bar 16 mmØ @125mm Vertical bar

GENERAL NOTES
1. These drawings indicate in general
the projects in terms of Architectural
6'-9"

6'-9"
design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
12mmØ @150mm Horizontal bar 10 mmØ @150mm Horizontal bar all dimensions and conditions. both
on the plans and in the field, and be
responsible for any adjustments and
correction.
9" 9" 3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
face.
5. Only written dimensions in all cases
Plinth level beam shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
COLUMN C1
drawings and documents should be
12 mmØ @125mm Vertical bar
reported to the engineer for
1'-8"
7'-11" clarification and verification.
12 mmØ bars @150mm as Vertical bar
1'-8"

10 mmØ @150 mm Horizontal bar 10 mmØ bars @150 mm as Horizontal bar

12 mmØ @125mm Vertical bar REMARKS

...................................................................
...................................................................
20mmØ bars @150 mm ...................................................................
...................................................................
...................................................................
...................................................................
10 mmØ @150mm Horizontal bar ...................................................................
h = 3'-0"

STRUCTURAL DRAWING
SCALE: 1/4" = 1'-0"

4" THICK P.C.C

2.5" THICK FLAT BRICK SOLING

CROSS - SECTION BASEMENT WALL

SHEET NUMBER ST6
OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1
72'-11"
18'-3" 18'-3" 17'-6" 13'-2" CLIENT: MRS. BINITA BHAT

GENERAL NOTES
C
1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
C the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
19'-6"

all dimensions and conditions. both

on the plans and in the field, and be

16'-0"
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
face.
5. Only written dimensions in all cases
41'-8"

B B shall be followed.

37'-11"
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
16'-0"

16'-0"
reported to the engineer for
clarification and verification.

A A
REMARKS
5'-5"

5'-5"
...................................................................
...................................................................
Y ...................................................................
...................................................................
...................................................................
...................................................................
18'-3" 17'-6" 13'-2" ...................................................................
18'-3"
...................................................................
70'-2" ...................................................................
...................................................................

5 4 3 2 1
9" BASEMENT WALL LAYOUT
STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST7

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1 CLIENT: MRS. BINITA BHAT

72'-11"
18'-3" 18'-3" 17'-6" 13'-2"

MAIN GENERAL NOTES

BEAM MAIN
BEAM MAIN 1. These drawings indicate in general
14"x20" MAIN
14"x20" BEAM the projects in terms of Architectural
C 14"x20" BEAM design intent with the dimensions of
14"x20" the building. As indicated, the
VOID contractor shall furnish all items
C required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
9"x16"
BEAM

all dimensions and conditions. both

on the plans and in the field, and be
S

responsible for any adjustments and

S S S
19'-6"

correction.
BEAM BEAM BEAM
3. Refer to engineer's detail for sizes

16'-0"
9"x16" 9"x16" 9"x16"

9"x16"
and spacing of all beams, columns,

BEAM
9"x16"
BEAM
14"x20"

9"x16"

14"x20"
BEAM
BEAM slabs, foundations and trusses.
MAIN
14"x20"

BEAM

14"x20"
MAIN
BEAM

S
4. All interior dimensions are given

S
MAIN

BEAM
MAIN
S
from rough brick face to rough brick
face.
MAIN MAIN MAIN MAIN 5. Only written dimensions in all cases
BEAM BEAM BEAM BEAM shall be followed.
14"x20" 14"x20" 14"x20" 14"x20" 6. Architectural drawings must always
40'-3"

B B be read in conjunction with all other

relevant services drawings and

37'-11"
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
S S S clarification and verification.
BEAM BEAM BEAM
16'-0"

16'-0"
9"x16" 9"x16" 9"x16"
14"x20"

14"x20"
14"x20"
BEAM

14"x20"
MAIN

14"x20"

BEAM
BEAM
BEAM

MAIN
MAIN
MAIN
9"x16"

9"x16"
BEAM
BEAM

BEAM
MAIN
S

MAIN MAIN MAIN

BEAM VOID
BEAM BEAM
14"x20" 14"x20" 14"x20" REMARKS
A A ...................................................................
4'-0"

...................................................................

5'-5"
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2" ...................................................................
70'-2"

5 4 3 2 1
STRUCTURAL DRAWING
BEAM LAYOUT PLAN AT GROUND FLOOR SCALE: 3/32" = 1'-0"

SHEET NUMBER ST8

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1 CLIENT: MRS. BINITA BHAT

72'-11"
18'-3" 18'-3" 17'-6" 13'-2"

MAIN GENERAL NOTES

BEAM MAIN
BEAM 1. These drawings indicate in general
14"x20" MAIN
MAIN the projects in terms of Architectural
C 14"x20" BEAM
14"x20" BEAM design intent with the dimensions of
14"x20" the building. As indicated, the
VOID contractor shall furnish all items
C required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
9"x16"
BEAM

all dimensions and conditions. both

on the plans and in the field, and be
S

S responsible for any adjustments and

S S S
19'-6"

BEAM correction.
BEAM BEAM BEAM 3. Refer to engineer's detail for sizes
9"x16"

16'-0"
9"x16" 9"x16" 9"x16" and spacing of all beams, columns,

9"x16"
BEAM
14"x20"

9"x16"
slabs, foundations and trusses.

14"x20"
BEAM
BEAM
MAIN
14"x20"

BEAM

14"x20"
MAIN
BEAM

4. All interior dimensions are given

S
MAIN

BEAM

14"x20"
MAIN
S

BEAM
from rough brick face to rough brick

MAIN
face.
MAIN MAIN MAIN MAIN 5. Only written dimensions in all cases
BEAM BEAM BEAM BEAM shall be followed.
14"x20" 14"x20" 14"x20" 14"x20" 6. Architectural drawings must always
40'-3"

be read in conjunction with all other

B B relevant services drawings and

37'-11"
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
S S S clarification and verification.
BEAM BEAM BEAM
16'-0"

16'-0"
9"x16" 9"x16" 9"x16"
14"x20"

14"x20"
14"x20"
BEAM

14"x20"
MAIN

14"x20"

BEAM
BEAM
BEAM

MAIN
MAIN
MAIN
9"x16"

9"x16"
BEAM
BEAM

BEAM
MAIN
S

MAIN MAIN MAIN

BEAM VOID
BEAM BEAM
14"x20" 14"x20" 14"x20" REMARKS
A A ...................................................................
4'-0"

...................................................................

71'-11"

5 4 3 2 1
STRUCTURAL DRAWING
BEAM LAYOUT PLAN AT FIRST FLOOR SCALE: 3/32" = 1'-0"

SHEET NUMBER ST9

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1
CLIENT: MRS. BINITA BHAT
72'-11"
18'-3" 18'-3" 17'-6" 13'-2"

MAIN
BEAM MAIN GENERAL NOTES
14"x20" BEAM MAIN
MAIN 1. These drawings indicate in general
14"x20" BEAM
C 14"x20" BEAM the projects in terms of Architectural
14"x20" design intent with the dimensions of
VOID the building. As indicated, the
contractor shall furnish all items
C required for the proper execution and
completion of the work.
9"x16"

2. Contractor shall examine and verify

BEAM

all dimensions and conditions. both

on the plans and in the field, and be

S S S S
19'-6"

responsible for any adjustments and

BEAM BEAM BEAM BEAM
9"x16"
correction.

16'-0"
9"x16" 9"x16" 9"x16" 3. Refer to engineer's detail for sizes

9"x16"
BEAM
14"x20"
and spacing of all beams, columns,

9"x16"

14"x20"
BEAM
BEAM
MAIN
14"x20"

BEAM

14"x20"
MAIN
slabs, foundations and trusses.
BEAM

S
MAIN

BEAM

14"x20"
MAIN
S

BEAM
4. All interior dimensions are given

MAIN
from rough brick face to rough brick
MAIN MAIN MAIN MAIN face.
BEAM BEAM BEAM BEAM 5. Only written dimensions in all cases
14"x20" 14"x20" 14"x20" 14"x20" shall be followed.
40'-3"

6. Architectural drawings must always

B B be read in conjunction with all other

37'-11"
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
S S S reported to the engineer for
BEAM BEAM BEAM clarification and verification.
16'-0"

16'-0"
9"x16" 9"x16" 9"x16"
14"x20"

14"x20"
14"x20"
BEAM

14"x20"
MAIN

14"x20"

BEAM
BEAM
BEAM

MAIN
MAIN
MAIN
9"x16"

9"x16"
BEAM
BEAM

BEAM
MAIN
S

MAIN MAIN MAIN

BEAM BEAM VOID BEAM
14"x20" 14"x20" 14"x20"
A A REMARKS
4'-0"

...................................................................

5 4 3 2 1
BEAM LAYOUT PLAN AT SECOND/THIRD/FOURTH FLOOR STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST10

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1 CLIENT: MRS. BINITA BHAT

72'-11"
18'-3" 18'-3" 17'-6" 13'-2"

MAIN GENERAL NOTES

BEAM MAIN
BEAM 1. These drawings indicate in general
14"x20" MAIN
14"x20" BEAM MAIN the projects in terms of Architectural
C 14"x20" BEAM design intent with the dimensions of
14"x20" the building. As indicated, the
VOID contractor shall furnish all items
VOID C required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
9"x16"
BEAM

all dimensions and conditions. both

VOID on the plans and in the field, and be
S

S responsible for any adjustments and

S S
19'-6"

BEAM correction.
BEAM BEAM 3. Refer to engineer's detail for sizes
9"x16"

16'-0"
9"x16" 9"x16" and spacing of all beams, columns,
14"x20"

9"x16"

14"x20"
slabs, foundations and trusses.

BEAM
BEAM
MAIN
14"x20"

BEAM

14"x20"
MAIN
BEAM

4. All interior dimensions are given

MAIN

BEAM

14"x20"
MAIN
S

BEAM
from rough brick face to rough brick

MAIN
face.
MAIN MAIN MAIN MAIN 5. Only written dimensions in all cases
BEAM BEAM BEAM BEAM shall be followed.
14"x20" 14"x20" 14"x20" 14"x20" 6. Architectural drawings must always
40'-3"

be read in conjunction with all other

B B relevant services drawings and

37'-11"
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
S S S clarification and verification.
BEAM BEAM BEAM
16'-0"

9"x16" 9"x16" 9"x16"

14"x20"

14"x20"
14"x20"
BEAM

14"x20"
MAIN

14"x20"

BEAM
BEAM
BEAM

MAIN
MAIN
MAIN
9"x16"

9"x16"
BEAM
BEAM

BEAM
MAIN
S

MAIN MAIN MAIN

BEAM VOID BEAM BEAM
14"x20" 14"x20" 14"x20" REMARKS
A A ...................................................................
4'-0"

...................................................................

5 4 3 2 1
BEAM LAYOUT PLAN AT FIFTH FLOOR STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST11

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1
72'-11" CLIENT: MRS. BINITA BHAT

18'-3" 18'-3" 17'-6" 13'-2"

MAIN
BEAM MAIN GENERAL NOTES
14"x20" BEAM MAIN
14"x20" BEAM MAIN 1. These drawings indicate in general
C 14"x20" BEAM the projects in terms of Architectural
14"x20" design intent with the dimensions of
VOID
the building. As indicated, the
VOID C contractor shall furnish all items
required for the proper execution and
completion of the work.
9"x16"
BEAM

2. Contractor shall examine and verify

all dimensions and conditions. both
S

S S S S on the plans and in the field, and be

19'-6"

BEAM BEAM BEAM BEAM responsible for any adjustments and

9"x16" 9"x16" correction.

16'-0"
9"x16" 9"x16"
3. Refer to engineer's detail for sizes

14"x20"

9"x16"

14"x20"
BEAM
BEAM
MAIN and spacing of all beams, columns,
14"x20"

BEAM

14"x20"
MAIN
BEAM
MAIN

BEAM
slabs, foundations and trusses.

14"x20"
MAIN
S

BEAM
MAIN
4. All interior dimensions are given
from rough brick face to rough brick

9"x16"
BEAM
MAIN MAIN MAIN MAIN face.
BEAM BEAM BEAM BEAM 5. Only written dimensions in all cases

S
14"x20" 14"x20" 14"x20" 14"x20" shall be followed.
40'-3"

B B 6. Architectural drawings must always

36'-6"
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
S
reported to the engineer for
BEAM
clarification and verification.

16'-0"
16'-0"

9"x16"

14"x20"
14"x20"

BEAM
MAIN
9"x16"
BEAM

BEAM
MAIN

MAIN MAIN
VOID BEAM BEAM
14"x20" 14"x20"
A A REMARKS
4'-0"

4'-0"
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2" ...................................................................
...................................................................
72'-0"

5 4 3 2 1
BEAM LAYOUT PLAN AT TOP STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST12

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

CLIENT: MRS. BINITA BHAT

1 2 1 1 2 1 1 2 1 1 2 1 1

5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10"

GENERAL NOTES
2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT)
Second Floor 1. These drawings indicate in general
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) the projects in terms of Architectural
design intent with the dimensions of
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) the building. As indicated, the
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10" contractor shall furnish all items
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø required for the proper execution and
completion of the work.
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C
2. Contractor shall examine and verify
2 LEGGED STIRRUPS all dimensions and conditions. both
TMT 10Ø@6" C/C on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
1 1 1
4. All interior dimensions are given
1 2 1 2 1 2 1 2 1
from rough brick face to rough brick
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" face.
2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT)
First Floor 5. Only written dimensions in all cases
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) shall be followed.
6. Architectural drawings must always
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) be read in conjunction with all other
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" relevant services drawings and
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø contract documents. Any
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C discrepancy between these
drawings and documents should be
2 LEGGED STIRRUPS reported to the engineer for
TMT 10Ø@6" C/C clarification and verification.

1 2 1 1 2 1 1 2 1 1 2 1

5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0"

2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT)
Ground Floor
REMARKS
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO)
5-20mm Ø (THO)
...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO)
...................................................................
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4"
...................................................................
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø ...................................................................
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C ...................................................................
...................................................................
2 LEGGED STIRRUPS ...................................................................
TMT 10Ø@6" C/C ...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-11" ...................................................................

5 4 3 2 A-1
BEAM DETAIL STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

BEAM DETAIL
ALONG GRID A-A (GF to 2F)

SHEET NUMBER ST13

OCTOBER 2021
N

9 9 10 9 9 10 9 9

5'-6" 5'-6" 5'-3" 5'-3" 2'-11" COMMERCIAL BUILDING

2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT)
Top Floor BANESHWOR - 10, KATHMANDU
3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO)
3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO)
2'-11" 3'-4" 3'-4" 3'-4" 3'-4" 2'-11"
TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø CLIENT: MRS. BINITA BHAT
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C

GENERAL NOTES
1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
7 8 7 7 8 7 7 8 7 7 8 7 7 the building. As indicated, the
contractor shall furnish all items
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10"
3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) required for the proper execution and
Fifth Floor completion of the work.
4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) 2. Contractor shall examine and verify
4-16mm Ø (THO) 4-16mm Ø (THO) all dimensions and conditions. both
4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO)
3'-4" on the plans and in the field, and be
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10"
responsible for any adjustments and
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø correction.
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C 3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
2 LEGGED STIRRUPS slabs, foundations and trusses.
TMT 10Ø@6" C/C 4. All interior dimensions are given
from rough brick face to rough brick
face.
5. Only written dimensions in all cases
shall be followed.
6. Architectural drawings must always
5 6 5 5 6 5 5 6 5
5 6 5 5
be read in conjunction with all other
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10" relevant services drawings and
2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) contract documents. Any
Fourth Floor discrepancy between these
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) drawings and documents should be
4-20mm Ø (THO) 4-20mm Ø (THO) reported to the engineer for
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
3'-4" clarification and verification.
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C
2 LEGGED STIRRUPS
TMT 10Ø@6" C/C

REMARKS
...................................................................
3 3 3
3 4 3 4 3 4 3 4 3 3 ...................................................................
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10" ...................................................................
3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) ...................................................................
Third Floor
...................................................................
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) ...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) ...................................................................
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10" ...................................................................
...................................................................
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø ...................................................................
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C
2 LEGGED STIRRUPS
TMT 10Ø@6" C/C

STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

BEAM DETAIL
ALONG GRID A-A (3F to ROOF)
SHEET NUMBER ST14
OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

CLIENT: MRS. BINITA BHAT

1 2 1 1 2 1 1 2 1 1 2 1 1

5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10" GENERAL NOTES
2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT)
Second Floor 1. These drawings indicate in general
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) the projects in terms of Architectural
5-20mm Ø (THO) design intent with the dimensions of
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10" the building. As indicated, the
contractor shall furnish all items
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø required for the proper execution and
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C completion of the work.
2. Contractor shall examine and verify
2 LEGGED STIRRUPS all dimensions and conditions. both
TMT 10Ø@6" C/C on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
1 2 1 1 2 1 1 2 1 1 2 1 4. All interior dimensions are given
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" from rough brick face to rough brick
2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) face.
First Floor 5. Only written dimensions in all cases
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) shall be followed.
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 6. Architectural drawings must always
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" be read in conjunction with all other
relevant services drawings and
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø contract documents. Any
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C discrepancy between these
drawings and documents should be
2 LEGGED STIRRUPS reported to the engineer for
TMT 10Ø@6" C/C clarification and verification.

1 2 1 1 2 1 1 2 1 1 2 1

5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0"

2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT)
Ground Floor
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) REMARKS
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) ...................................................................
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" ...................................................................
...................................................................
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø
...................................................................
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C ...................................................................
2 LEGGED STIRRUPS ...................................................................
...................................................................
TMT 10Ø@6" C/C
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2" ...................................................................

5 4 3 2 1

BEAM DETAIL STRUCTURAL DRAWING

SCALE: 3/32" = 1'-0"
ALONG GRID B-B (GF to 2F)

SHEET NUMBER ST15

OCTOBER 2021
N

5 4 3 2 1
COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

9 10 9 9 10 9 9 10 9 9 10 9 9

5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10"

2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) CLIENT: MRS. BINITA BHAT
Top Floor
3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO)
3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø GENERAL NOTES
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C 1. These drawings indicate in general
2 LEGGED STIRRUPS the projects in terms of Architectural
TMT 10Ø@6" C/C design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
7 8 7 7 8 7 7 8 7 7 8 7 7
on the plans and in the field, and be
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10" responsible for any adjustments and
3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) correction.
Fifth Floor
4-16mm Ø (THO)
3. Refer to engineer's detail for sizes
4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO)
and spacing of all beams, columns,
4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) slabs, foundations and trusses.
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10" 4. All interior dimensions are given
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø from rough brick face to rough brick
face.
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C 5. Only written dimensions in all cases
2 LEGGED STIRRUPS shall be followed.
TMT 10Ø@6" C/C 6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
5 6 5 5 6 5 5 6 5
5 6 5 5 clarification and verification.
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10"
2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT)
Fourth Floor
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C
2 LEGGED STIRRUPS REMARKS
TMT 10Ø@6" C/C ...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
3 4 3 3 4 3 3 4 3 3 4 3 3
...................................................................
...................................................................
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-10" ...................................................................
3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT)
Third Floor ...................................................................
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-10"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"
2 LEGGED STIRRUPS
TMT 10Ø@6" C/C

BEAM DETAIL SHEET NUMBER ST16

OCTOBER 2021
ALONG GRID B-B (3F to ROOF)
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

CLIENT: MRS. BINITA BHAT

1 2 1 1 2 1 1 2 1 1 2 1 1

5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-2" GENERAL NOTES
2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT)
Second Floor 1. These drawings indicate in general
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) the projects in terms of Architectural
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) design intent with the dimensions of
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2" the building. As indicated, the
contractor shall furnish all items
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø required for the proper execution and
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C completion of the work.
2. Contractor shall examine and verify
2 LEGGED STIRRUPS all dimensions and conditions. both
TMT 10Ø@6" C/C on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
1 2 1 1 2 1 1 2 1 1 2 1 4. All interior dimensions are given
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-2" from rough brick face to rough brick
2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) face.
First Floor
5. Only written dimensions in all cases
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) shall be followed.
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 6. Architectural drawings must always
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2" be read in conjunction with all other
relevant services drawings and
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø contract documents. Any
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C discrepancy between these
drawings and documents should be
2 LEGGED STIRRUPS
reported to the engineer for
TMT 10Ø@6" C/C clarification and verification.

1 2 1 1 2 1 1 2 1 1 2 1

5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0"

2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-16mm Ø (EXT)
Ground Floor
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) REMARKS
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) ...................................................................
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" ...................................................................
...................................................................
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø
...................................................................
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C ...................................................................
2 LEGGED STIRRUPS ...................................................................
TMT 10Ø@6" C/C ...................................................................
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2"
...................................................................

5 4 3 2 1

STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

BEAM DETAIL SHEET NUMBER ST17

OCTOBER 2021
ALONG GRID C-C (GF to 2F)
N

5 4 3 2 1
COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

9 9 10 9 9 10 9 9 10 9 9

5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-2"

2-12mm Ø (THO) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) CLIENT: MRS. BINITA BHAT
Top Floor
3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO)

3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO) 3-16mm Ø (THO)

3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø GENERAL NOTES
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C 1. These drawings indicate in general
2 LEGGED STIRRUPS the projects in terms of Architectural
TMT 10Ø@6" C/C design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
11 7 8 7 7 8 7 7 8 7 7
on the plans and in the field, and be
5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-2" responsible for any adjustments and
3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) 3-16mm Ø (EXT) correction.
Fifth Floor
3. Refer to engineer's detail for sizes
6-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO)
and spacing of all beams, columns,
6-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) 4-16mm Ø (THO) slabs, foundations and trusses.
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2" 4. All interior dimensions are given
from rough brick face to rough brick
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø
face.
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C 5. Only written dimensions in all cases
2 LEGGED STIRRUPS shall be followed.
TMT 10Ø@6" C/C 6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
5 6 5 5 6 5 5 6 5
5 6 5 5 clarification and verification.
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-2"
2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT)
Fourth Floor
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C
REMARKS
2 LEGGED STIRRUPS
TMT 10Ø@6" C/C ...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
3 4 3 3 4 3 3 4 3 3 4 3 3
...................................................................
...................................................................
5'-6" 5'-6" 5'-6" 5'-6" 5'-3" 5'-3" 4'-0" 4'-0" 3'-2" ...................................................................
3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT)
Third Floor ...................................................................
4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø TMT 10Ø
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C @4" C/C STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"
2 LEGGED STIRRUPS
TMT 10Ø@6" C/C

BEAM DETAIL SHEET NUMBER ST18

OCTOBER 2021
ALONG GRID C-C (3F to ROOF)
N
9 10 9

4'-10" 4'-10"
2-12mm Ø (EXT)
Top Floor
3-16mm Ø (THO)

3-16mm Ø (THO)
COMMERCIAL BUILDING
2'-11" 3'-4" 3'-4" BANESHWOR - 10, KATHMANDU
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
CLIENT: MRS. BINITA BHAT

GENERAL NOTES
7 8 7 7 8 7 1. These drawings indicate in general
6'-2" 6'-2" 4'-10" 4'-10" the projects in terms of Architectural
3-16mm Ø (EXT) 3-16mm Ø (EXT) design intent with the dimensions of
Fifth Floor
the building. As indicated, the
4-16mm Ø (THO) 4-16mm Ø (THO) 1 2 1 1 2 1
contractor shall furnish all items
4-16mm Ø (THO) 4-16mm Ø (THO) 6'-2" 6'-2" 4'-10" 4'-10" required for the proper execution and
2-16mm Ø (EXT) 2-16mm Ø (EXT)
3'-4" 3'-4" 3'-4" 3'-4" First Floor completion of the work.
5-20mm Ø (THO) 5-20mm Ø (THO) 2. Contractor shall examine and verify
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø all dimensions and conditions. both
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C 5-20mm Ø (THO) 5-20mm Ø (THO) on the plans and in the field, and be
3'-4" 3'-4" 3'-4" 3'-4" responsible for any adjustments and
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø correction.
3. Refer to engineer's detail for sizes
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
face.
5 6 5 5 6 5 5. Only written dimensions in all cases
6'-2" 6'-2" 4'-10" 4'-10" shall be followed.
2-12mm Ø (EXT) 2-12mm Ø (EXT) 6. Architectural drawings must always
Fourth Floor
be read in conjunction with all other
4-20mm Ø (THO) 4-20mm Ø (THO) 1 2 1
relevant services drawings and
4-20mm Ø (THO) 4-20mm Ø (THO) 6'-2" 6'-2" contract documents. Any
2-16mm Ø (EXT)
3'-4" 3'-4" 3'-4" 3'-4" Ground Floor discrepancy between these
5-20mm Ø (THO) drawings and documents should be
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø reported to the engineer for
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C 5-20mm Ø (THO) clarification and verification.
3'-4" 3'-4"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
@4" C/C TMT 10Ø@6" C/C @4" C/C

3 4 3 3 4 3

6'-2" 6'-2" 4'-10" 4'-10" REMARKS

3-12mm Ø (EXT) 3-12mm Ø (EXT) 16'-0" 16'-0"
Third Floor ...................................................................
4-20mm Ø (THO) 4-20mm Ø (THO)
...................................................................
...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO) A C D ...................................................................
3'-4" 3'-4" 3'-4" 3'-4" ...................................................................
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø BEAM DETAIL ...................................................................
...................................................................
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
ALONG GRID 1-1 ...................................................................
...................................................................
...................................................................

STRUCTURAL DRAWING
1 2 1 1 2 1
SCALE: 3/32" = 1'-0"
6'-2" 6'-2" 4'-10" 4'-10"
2-16mm Ø (EXT) 2-16mm Ø (EXT)
Second Floor
5-20mm Ø (THO) 5-20mm Ø (THO)
5-20mm Ø (THO) 5-20mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C SHEET NUMBER ST19
OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

CLIENT: MRS. BINITA BHAT

1 2 1 1 2 1

4'-10" 4'-10" 5'-0" 5'-0"

2-16mm Ø (EXT) 2-16mm Ø (EXT)
Second Floor
GENERAL NOTES
5-20mm Ø (THO) 5-20mm Ø (THO) 1. These drawings indicate in general
the projects in terms of Architectural
5-20mm Ø (THO) 5-20mm Ø (THO)
design intent with the dimensions of
4'-7" 3'-4" 3'-4" 3'-4" 3'-4" the building. As indicated, the
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø contractor shall furnish all items
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
1 2 1 1 2 1
slabs, foundations and trusses.
4. All interior dimensions are given
4'-10" 4'-10" 5'-0" 5'-0"
2-16mm Ø (EXT) 2-16mm Ø (EXT) from rough brick face to rough brick
First Floor face.
5-20mm Ø (THO) 5-20mm Ø (THO) 5. Only written dimensions in all cases
shall be followed.
5-20mm Ø (THO) 5-20mm Ø (THO)
6. Architectural drawings must always
4'-7" 3'-4" 3'-4" 3'-4" 3'-4" be read in conjunction with all other
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø relevant services drawings and
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
clarification and verification.

1 2 1 1 2 1

4'-10" 4'-10" 5'-0" 5'-0"

2-16mm Ø (EXT) 2-16mm Ø (EXT)
Ground Floor
5-20mm Ø (THO) 5-20mm Ø (THO)
REMARKS
5-20mm Ø (THO) 5-20mm Ø (THO)
4'-7" 3'-4" 3'-4" 3'-4" 3'-4" ...................................................................
...................................................................
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø ...................................................................
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C ...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
16'-0" 16'-8"

A B C
STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"
BEAM DETAIL
ALONG GRID 2-2 (GF to 1F)

SHEET NUMBER ST20

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU
9 10 9 9 10 9

4'-10" 4'-10" 5'-0" 5'-0"

2-12mm Ø (EXT) 2-12mm Ø (EXT)
Top Floor
3-16mm Ø (THO) 3-16mm Ø (THO) CLIENT: MRS. BINITA BHAT
3-16mm Ø (THO) 3-16mm Ø (THO)
4'-7" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
GENERAL NOTES
1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
7 8 7 7 8 7
2. Contractor shall examine and verify
4'-10" 4'-10" 5'-0" 5'-0" all dimensions and conditions. both
3-16mm Ø (EXT) 3-16mm Ø (EXT) on the plans and in the field, and be
Fifth Floor
responsible for any adjustments and
4-16mm Ø (THO) 4-16mm Ø (THO)
correction.
4-16mm Ø (THO) 4-16mm Ø (THO) 3. Refer to engineer's detail for sizes
4'-7" 3'-4" 3'-4" 3'-4" 3'-4" and spacing of all beams, columns,
TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø slabs, foundations and trusses.
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø
4. All interior dimensions are given
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C from rough brick face to rough brick
face.
5. Only written dimensions in all cases
shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
5 6 5 5 6 5 drawings and documents should be
4'-10" 4'-10" 5'-0" 5'-0" reported to the engineer for
2-12mm Ø (EXT) 2-12mm Ø (EXT) clarification and verification.
Fourth Floor
4-20mm Ø (THO) 4-20mm Ø (THO)
4-20mm Ø (THO) 4-20mm Ø (THO)
4'-7" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C

REMARKS
...................................................................
...................................................................
...................................................................
...................................................................
3 4 3 3 4 3
...................................................................
...................................................................
4'-10" 4'-10" 5'-0" 5'-0" ...................................................................
3-12mm Ø (EXT) 3-12mm Ø (EXT)
Third Floor ...................................................................
4-20mm Ø (THO) 4-20mm Ø (THO) ...................................................................
...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO)
4'-7" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

BEAM DETAIL
ALONG GRID 2-2 (3F to ROOF)
SHEET NUMBER ST21
OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

CLIENT: MRS. BINITA BHAT

1 2 1 1 2 1
GENERAL NOTES
4'-10" 4'-10" 5'-3" 5'-3"
2-16mm Ø (EXT) 2-16mm Ø (EXT) 1. These drawings indicate in general
Second Floor
the projects in terms of Architectural
5-20mm Ø (THO) 5-20mm Ø (THO) design intent with the dimensions of
5-20mm Ø (THO) 5-20mm Ø (THO) the building. As indicated, the
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" contractor shall furnish all items
required for the proper execution and
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø completion of the work.
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C 2. Contractor shall examine and verify
all dimensions and conditions. both
on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
1 2 1 1 2 1 from rough brick face to rough brick
4'-10" 4'-10" 5'-3" 5'-3" face.
2-16mm Ø (EXT) 2-16mm Ø (EXT) 5. Only written dimensions in all cases
First Floor
shall be followed.
5-20mm Ø (THO) 5-20mm Ø (THO) 6. Architectural drawings must always
5-20mm Ø (THO) 5-20mm Ø (THO) be read in conjunction with all other
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" relevant services drawings and
contract documents. Any
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø discrepancy between these
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C drawings and documents should be
reported to the engineer for
clarification and verification.

1 2 1 1 2 1

4'-10" 4'-10" 5'-3" 5'-3"

2-16mm Ø (EXT) 2-16mm Ø (EXT)
Ground Floor REMARKS
5-20mm Ø (THO) 5-20mm Ø (THO)
...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO) ...................................................................
3'-4" 3'-4" 3'-4" 3'-4" ...................................................................
TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø ...................................................................
...................................................................
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C ...................................................................
...................................................................
...................................................................
...................................................................
...................................................................

16'-0" 17'-7"

A B C STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

BEAM DETAIL
ALONG GRID 3-3 (GF to 2F)

SHEET NUMBER ST22

OCTOBER 2021
N

9 10 9 9 10 9
COMMERCIAL BUILDING
4'-10" 4'-10" 5'-3" 5'-3"
2-12mm Ø (EXT) 2-12mm Ø (EXT) BANESHWOR - 10, KATHMANDU
Top Floor
3-16mm Ø (THO) 3-16mm Ø (THO)

3-16mm Ø (THO) 3-16mm Ø (THO)

3'-2" 3'-4" 3'-4" 3'-4" 3'-4" CLIENT: MRS. BINITA BHAT
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C

GENERAL NOTES
1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
the building. As indicated, the
7 8 7 7 8 7 contractor shall furnish all items
required for the proper execution and
4'-10" 4'-10" 5'-3" 5'-3"
3-16mm Ø (EXT) 3-16mm Ø (EXT) completion of the work.
Fifth Floor 2. Contractor shall examine and verify
4-16mm Ø (THO) 4-16mm Ø (THO) all dimensions and conditions. both
on the plans and in the field, and be
4-16mm Ø (THO) 4-16mm Ø (THO)
responsible for any adjustments and
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" correction.
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø 3. Refer to engineer's detail for sizes
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
face.
5. Only written dimensions in all cases
shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
5 6 5 5 6 5
relevant services drawings and
contract documents. Any
4'-10" 4'-10" 5'-3" 5'-3"
2-12mm Ø (EXT) 2-12mm Ø (EXT) discrepancy between these
Fourth Floor drawings and documents should be
4-20mm Ø (THO) 4-20mm Ø (THO) reported to the engineer for
clarification and verification.
4-20mm Ø (THO) 4-20mm Ø (THO)
3'-2" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C

REMARKS
...................................................................
...................................................................
3 4 3 3 4 3 ...................................................................
4'-10" 4'-10" 5'-3" 5'-3" ...................................................................
3-12mm Ø (EXT) 3-12mm Ø (EXT) ...................................................................
Third Floor
...................................................................
4-20mm Ø (THO) 4-20mm Ø (THO) ...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO) ...................................................................
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" ...................................................................
...................................................................
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C

STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

BEAM DETAIL
ALONG GRID 3-3 (GF to 2F)

SHEET NUMBER ST23

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

1 2 1 1 2 1 CLIENT: MRS. BINITA BHAT

4'-10" 4'-10" 5'-6" 5'-6"
2-16mm Ø (EXT) 2-16mm Ø (EXT)
Second Floor
5-20mm Ø (THO) 5-20mm Ø (THO)
5-20mm Ø (THO) 5-20mm Ø (THO)
3'-2" 3'-4" 3'-4" 3'-4" 3'-4"
GENERAL NOTES
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø 1. These drawings indicate in general
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C the projects in terms of Architectural
TMT 10Ø@6" C/C
design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
on the plans and in the field, and be
1 2 1 responsible for any adjustments and
1 2 1
correction.
4'-10" 4'-10" 5'-6" 5'-6" 3. Refer to engineer's detail for sizes
2-16mm Ø (EXT) 2-16mm Ø (EXT)
First Floor and spacing of all beams, columns,
5-20mm Ø (THO) 5-20mm Ø (THO) slabs, foundations and trusses.
4. All interior dimensions are given
5-20mm Ø (THO) 5-20mm Ø (THO) from rough brick face to rough brick
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" face.
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø 5. Only written dimensions in all cases
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
clarification and verification.
1 2 1 1 2 1

4'-10" 4'-10" 5'-6" 5'-6"

2-16mm Ø (EXT) 2-16mm Ø (EXT)
Ground Floor
5-20mm Ø (THO) 5-20mm Ø (THO)
5-20mm Ø (THO) 5-20mm Ø (THO)
3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
REMARKS
@4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
16'-0" 18'-6" ...................................................................
...................................................................
...................................................................
A B C

STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"
BEAM DETAIL
ALONG GRID 4-4 (GF to 2F)

SHEET NUMBER ST24

OCTOBER 2021
N
9 10 9 9 10 9

4'-10" 4'-10" 5'-6" 5'-6"

2-12mm Ø (EXT) 2-12mm Ø (EXT)
Top Floor
3-16mm Ø (THO) 3-16mm Ø (THO)

3-16mm Ø (THO) 3-16mm Ø (THO) COMMERCIAL BUILDING

3'-2" 3'-4" 3'-4" 3'-4" 3'-4" BANESHWOR - 10, KATHMANDU
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C

CLIENT: MRS. BINITA BHAT

GENERAL NOTES
7 8 7 7 8 7 1. These drawings indicate in general
4'-10" 4'-10" 5'-6" 5'-6" the projects in terms of Architectural
3-16mm Ø (EXT) 3-16mm Ø (EXT) design intent with the dimensions of
Fifth Floor
the building. As indicated, the
4-16mm Ø (THO) 4-16mm Ø (THO)
contractor shall furnish all items
4-16mm Ø (THO) 4-16mm Ø (THO) required for the proper execution and
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" completion of the work.
2. Contractor shall examine and verify
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø all dimensions and conditions. both
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.
4. All interior dimensions are given
from rough brick face to rough brick
face.
5 6 5 5 6 5 5. Only written dimensions in all cases
4'-10" 4'-10" 5'-6" 5'-6" shall be followed.
2-12mm Ø (EXT) 2-12mm Ø (EXT) 6. Architectural drawings must always
Fourth Floor
be read in conjunction with all other
4-20mm Ø (THO) 4-20mm Ø (THO) relevant services drawings and
4-20mm Ø (THO) 4-20mm Ø (THO) contract documents. Any
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" discrepancy between these
drawings and documents should be
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø reported to the engineer for
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C clarification and verification.

3 4 3 3 4 3

4'-10" 4'-10" 5'-6" 5'-6" REMARKS

3-12mm Ø (EXT) 3-12mm Ø (EXT)
Third Floor ...................................................................
4-20mm Ø (THO) 4-20mm Ø (THO) ...................................................................
...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO) ...................................................................
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" ...................................................................
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø ...................................................................
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C ...................................................................
...................................................................
...................................................................
...................................................................

STRUCTURAL DRAWING
BEAM DETAIL SCALE: 3/32" = 1'-0"

ALONG GRID 4-4 (3F to ROOF)

SHEET NUMBER ST25

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

9 10 9 9

4'-10" 4'-10"
2-12mm Ø (EXT) 2-12mm Ø (THO) CLIENT: MRS. BINITA BHAT
Top Floor
3-16mm Ø (THO) 3-16mm Ø (THO)
3-16mm Ø (THO) 3-16mm Ø (THO)
3'-2" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø GENERAL NOTES
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C 1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
1 2 1 1 2 1 7 8 7 11
on the plans and in the field, and be
4'-10" 4'-10" 5'-10" 5'-10" 4'-10" 4'-10" responsible for any adjustments and
2-16mm Ø (EXT) 2-16mm Ø (EXT) 3-16mm Ø (EXT) correction.
Second Floor Fifth Floor
3. Refer to engineer's detail for sizes
5-20mm Ø (THO) 5-20mm Ø (THO) 4-16mm Ø (THO) 6-16mm Ø (THO) and spacing of all beams, columns,
5-20mm Ø (THO) 5-20mm Ø (THO) 4-16mm Ø (THO) 6-16mm Ø (THO) slabs, foundations and trusses.
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2" 3'-4" 3'-4" 3'-4" 3'-4" 4. All interior dimensions are given
from rough brick face to rough brick
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø face.
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C 5. Only written dimensions in all cases
shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
1 2 1 1 2 1 5 6 5 5 6 5 clarification and verification.
4'-10" 4'-10" 5'-10" 5'-10" 4'-10" 4'-10" 5'-10" 5'-10"
2-16mm Ø (EXT) 2-16mm Ø (EXT) 2-12mm Ø (EXT) 2-12mm Ø (EXT)
First Floor Fourth Floor
5-20mm Ø (THO) 5-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
5-20mm Ø (THO) 5-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
REMARKS
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
1 2 1 1 2 1 3 4 3 3 4 3
...................................................................
4'-10" 4'-10" 5'-10" 5'-10" 4'-10" 4'-10" 5'-10" 5'-10" ...................................................................
2-16mm Ø (EXT) 2-16mm Ø (EXT) 3-12mm Ø (EXT) 3-12mm Ø (EXT)
Ground Floor Third Floor ...................................................................
5-20mm Ø (THO) 5-20mm Ø (THO) 4-20mm Ø (THO) 4-20mm Ø (THO)
5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO) 5-20mm Ø (THO)
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" 3'-2" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C @4" C/C
STRUCTURAL DRAWING
TMT 10Ø@6" C/C
SCALE: 3/32" = 1'-0"

BEAM DETAIL SHEET NUMBER ST26

OCTOBER 2021
ALONG GRID 5-5
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU
1 2 1 1 2 1

4'-10" 4'-10" 5'-10" 5'-10"

2-16mm Ø (EXT) 2-16mm Ø (EXT)
First Floor
5-20mm Ø (THO) 5-20mm Ø (THO) CLIENT: MRS. BINITA BHAT
5-20mm Ø (THO) 5-20mm Ø (THO)
3'-2" 3'-4" 3'-4" 3'-4" 3'-4"
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø 3
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
2
GENERAL NOTES
1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
B B the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
1 2 1 1 2 1
2. Contractor shall examine and verify
4'-10" 4'-10" 5'-10" 5'-10" UP all dimensions and conditions. both
2-16mm Ø (EXT) 2-16mm Ø (EXT) DN
Ground Floor on the plans and in the field, and be
responsible for any adjustments and

16'-0"
5-20mm Ø (THO) 5-20mm Ø (THO)
LIFT correction.
5-20mm Ø (THO) 5-20mm Ø (THO) 6'-0" x 6'-6" 3. Refer to engineer's detail for sizes
3'-2" 3'-4" 3'-4" 3'-4" 3'-4" and spacing of all beams, columns,
TMT 10Ø TMT 10Ø2 LEGGED STIRRUPSTMT 10Ø TMT 10Ø 2 LEGGED STIRRUPS TMT 10Ø slabs, foundations and trusses.
4. All interior dimensions are given
@4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C @4" C/C TMT 10Ø@6" C/C @4" C/C
from rough brick face to rough brick
face.
5. Only written dimensions in all cases
A A shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
16'-0" contract documents. Any
19'-6" discrepancy between these
drawings and documents should be
C 17'-6"
A B reported to the engineer for
clarification and verification.

BEAM DETAIL 3 2
ALONG GRID 5-5
STAIRCASE DETAILINGS

REMARKS
...................................................................
10mmØ @150mm ...................................................................
16mmØ @125mm ...................................................................
...................................................................
Ø10 MM BAR 0.3 ...................................................................
L ...................................................................
10" ...................................................................
...................................................................
10mmØ NOSING BARS ...................................................................

6"
10mmØ @150mm ...................................................................
10mmØ @150mm
6"

16mmØ @125mm 0.3

L L 16mmØ @125mm

STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST27

OCTOBER 2021
N

BEAM SECTION DETAILS COMMERCIAL BUILDING

BANESHWOR - 10, KATHMANDU

1'-2" 1'-2" 1'-2"

5-20 mm Ø top bars (THO) 4-20 mm Ø top bars (THO) 4-20 mm Ø top bars (THO) CLIENT: MRS. BINITA BHAT
1'-3" 5"

1'-3" 5"

1'-3" 5"
2-16 mm Ø top bars (EXT) 3-12 mm Ø top bars (EXT) 2-12 mm Ø top bars (EXT)
GENERAL NOTES
5-20 mm Ø bottom bars (THO) 5-20 mm Ø bottom bars (THO) 4-20 mm Ø bottom bars (THO) 1. These drawings indicate in general
the projects in terms of Architectural
SECTION AT 1-1 SECTION AT 3-3 SECTION AT 5-5 design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
1'-2" 1'-2" 1'-2" completion of the work.
5-20 mm Ø top bars (THO) 4-20 mm Ø top bars (THO) 4-20 mm Ø top bars (THO) 2. Contractor shall examine and verify
1'-3" 5"

1'-3" 5"

1'-3" 5"
all dimensions and conditions. both
on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
5-20 mm Ø bottom bars (THO) 5-20 mm Ø bottom bars (THO) 4-20 mm Ø bottom bars (THO) and spacing of all beams, columns,
slabs, foundations and trusses.
SECTION AT 2-2 SECTION AT 4-4 SECTION AT 6-6 4. All interior dimensions are given
from rough brick face to rough brick
face.
5. Only written dimensions in all cases
shall be followed.
1'-2" 1'-2" 6. Architectural drawings must always
4-16 mm Ø top bars (THO) 3-16 mm Ø top bars (THO) be read in conjunction with all other
1'-3" 5"

1'-3" 5"

relevant services drawings and

2-12 mm Ø top bars (EXT) contract documents. Any
3-16 mm Ø top bars (EXT) discrepancy between these
drawings and documents should be
reported to the engineer for
4-16 mm Ø bottom bars (THO) 3-16 mm Ø bottom bars (THO) clarification and verification.

SECTION AT 7-7 SECTION AT 9-9

1'-2" 1'-2"
4-16 mm Ø top bars (THO) 3-16 mm Ø top bars (THO)
1'-3" 5"

1'-3" 5"

REMARKS
...................................................................
...................................................................
4-16 mm Ø bottom bars (THO) 3-16 mm Ø bottom bars (THO) ...................................................................
...................................................................
...................................................................
SECTION AT 8-8 SECTION AT 10-10 ...................................................................
...................................................................
...................................................................
...................................................................
...................................................................

STRUCTURAL DRAWING
SCALE: 1/4" = 1'-0"

SHEET NUMBER ST28

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1
72'-11" CLIENT: MRS. BINITA BHAT
18'-3" 18'-3" 17'-6" 13'-2"

Y
GENERAL NOTES
C 1. These drawings indicate in general
the projects in terms of Architectural
VOID design intent with the dimensions of
C the building. As indicated, the
contractor shall furnish all items
required for the proper execution and
completion of the work.
X X 2. Contractor shall examine and verify
all dimensions and conditions. both
19'-6"

on the plans and in the field, and be

responsible for any adjustments and

16'-0"
10mmØ bars @150mm
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.

10mmØ bars @150mm

4. All interior dimensions are given
from rough brick face to rough brick
face.
5. Only written dimensions in all cases
40'-3"

shall be followed.
B B 6. Architectural drawings must always

37'-11"
be read in conjunction with all other
relevant services drawings and
contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for

16'-0"
16'-0"

clarification and verification.

STAIR
VOID
VOID

A A
REMARKS
4'-0"

5'-5"
...................................................................
...................................................................
...................................................................
Y ...................................................................
...................................................................
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2" ...................................................................
...................................................................
70'-2" ...................................................................

5 4 3 2 1
TYPICAL SLAB BOTTOM REINFORCEMENT (FIRST FLOOR) STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST29

OCTOBER 2021
N

COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

5 4 3 2 1
71'-11" CLIENT: MRS. BINITA BHAT

18'-3" 18'-3" 17'-6" 13'-2"

1'-10" Y
GENERAL NOTES

1'-10"

1'-10"
1. These drawings indicate in general
C

1'-10"

1'-10"
the projects in terms of Architectural

1'-10"

1'-10"
VOID design intent with the dimensions of
the building. As indicated, the
C contractor shall furnish all items
1'-3" required for the proper execution and
2'-6" 3' 3' 2'-7" 2'-7" 2'-11" 2'-11" 2'-8" 2'-8" 2'-8" 2'-8" 3'-11" 3'-11" completion of the work.
2. Contractor shall examine and verify
X X all dimensions and conditions. both
on the plans and in the field, and be
3'-8"

3'-8"

3'-8"
19'-6"

responsible for any adjustments and

correction.

16'-0"
3. Refer to engineer's detail for sizes
2'-5"

2'-5"

2'-5"
and spacing of all beams, columns,
1'-3" slabs, foundations and trusses.
2'-6" 3' 3' 2'-7" 2'-7" 2'-11" 2'-11" 2'-8" 2'-8" 2'-8" 2'-8" 3'-11" 3'-11" 4. All interior dimensions are given
from rough brick face to rough brick
face.
2'-5"

2'-5"

2'-5"
5. Only written dimensions in all cases
40'-3"

shall be followed.
B B 6. Architectural drawings must always
be read in conjunction with all other

37'-11"
2'-5"

2'-5"

2'-5"
3'-2"

3'-2"
1'-3" 1'-5" relevant services drawings and
2'-6" 3' 3' 2'-7" 2'-7" 2'-11" 2'
contract documents. Any
2' discrepancy between these
drawings and documents should be
2'-5"

2'-5"

2'-5"
reported to the engineer for
clarification and verification.
16'-0"

2'-5"

2'-5"
1'-3" 1'-5"
2'-6" 3' 3' 2'-7" 2'-7" 2'-11" 2'-8" 2'-8" 2' 2'
STAIR
VOID
2'-8"

2'-8"

VOID

4'-10"
A A REMARKS
4'-0"

3'-2"

...................................................................
...................................................................
...................................................................
...................................................................
Y
...................................................................
...................................................................
...................................................................
...................................................................
18'-3" 18'-3" 17'-6" 13'-2" ...................................................................
68'-9" ...................................................................

5 4 3 2 1
TYPICAL SLAB TOP REINFORCEMENT (FIRST FLOOR)
All bars are 10mm @150 c/c
STRUCTURAL DRAWING
SCALE: 3/32" = 1'-0"

SHEET NUMBER ST30

OCTOBER 2021
N
5 4 10mmØ bars @150mm
3 2 10mmØ bars @150mm
1

5"
COMMERCIAL BUILDING
BANESHWOR - 10, KATHMANDU

1'-3" 2'-6" 3' 3' 2'-7" 2'-7" 2'-11" 2'-11" 3'-11" CLIENT: MRS. BINITA BHAT
18'-3" 18'-3" 17'-6" 13'-2" 4'

SLAB REINFORCEMENT DETAILS GENERAL NOTES

ALONG X - DIRECTION 1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
the building. As indicated, the
A B
10mmØ bars @150mm 10mmØ bars @150mm
C contractor shall furnish all items
required for the proper execution and
5"
completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
2'-8" 2'-5" 2'-5" 2'-5" 2'-5" 2'-5" 3'-8" and spacing of all beams, columns,
slabs, foundations and trusses.
1'-9"
1'-9" 4. All interior dimensions are given
16' varying
from rough brick face to rough brick
face.
SLAB REINFORCEMENT DETAILS 5. Only written dimensions in all cases
shall be followed.
ALONG Y - DIRECTION 6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and
9" contract documents. Any
discrepancy between these
drawings and documents should be
reported to the engineer for
clarification and verification.
4'

3'
135

S S

9"
°

5"
3"
10

1'-0"
Ø

SECTION AT S-S REMARKS

9" ...................................................................
1 IN 6 (max.) ...................................................................
ANCHORAGEMENT OF STIRRUPS PARAPET WALL TIE UP DETAIL ...................................................................
...................................................................
...................................................................
LENGTH=49Ø

...................................................................
Ld ...................................................................
LAP

L
...................................................................
a b ...................................................................
L/3 zone for splicing of top bars L/3 ...................................................................
10Ø TORKARI @ 4" C/C
1'

LENGTH=56Ø
LAP

STRUCTURAL DRAWING
SLAB THICKNESS

b a
1'6"-2'0" zone for splicing of top bars zone for splicing of top bars 1'6"-2'0" SCALE: 1/8" = 1'-0"
3'

a 10Ø TORKARI @ 4" C/C 10Ø TORKARI @ 4" C/C

b
b 3/8 L 1/4 L 3/8 L
a
LAPPING DETAILS FOR TERMINATION OF DETAIL OF LAPPING FOR BEAMS
COLUMN REINFORCEMENT AT COLUMN BARS
INTERMEDIATE LEVELS INSIDE A SLAB SHEET NUMBER ST31
OCTOBER 2021
Scale: 1/16" = 1'-0"
N

59 x dia of bar
DETAIL Y
100 500 500
8 mm Ø stirrups 6"c/c 100 9" 8mm Ø stirrurs 6"c/c

59x dia of bar

COMMERCIAL BUILDING

3"
1'-0" BANESHWOR - 10, KATHMANDU
2nos. -10mm Ø
2nos. -10 mm Ø BEAM

SECTIONAL PLAN AT B-B SECTION AT A-A

CLIENT: MRS. BINITA BHAT

slope 1 in 6 49 Ø

GENERAL NOTES
1. These drawings indicate in general
the projects in terms of Architectural
design intent with the dimensions of
the building. As indicated, the
contractor shall furnish all items
LAPPING DETAIL AT Y required for the proper execution and
SCALE:1"=1'-0" completion of the work.
2. Contractor shall examine and verify
all dimensions and conditions. both
on the plans and in the field, and be
responsible for any adjustments and
correction.
3. Refer to engineer's detail for sizes
and spacing of all beams, columns,
slabs, foundations and trusses.

59 x dia of bar
3 NOS.
10Ø BAR 4. All interior dimensions are given
from rough brick face to rough brick
face.

B=1'-8"
5. Only written dimensions in all cases

59 x dia of bar
shall be followed.
6. Architectural drawings must always
be read in conjunction with all other
relevant services drawings and

A
contract documents. Any
discrepancy between these

H/4 + B/2
BEAM
drawings and documents should be
reported to the engineer for
B B clarification and verification.
DIA. OF BAR=Ø
A

10mmØ @ 4" c/c

DETAILS OF A BEAM-COLUMN ELEVATION OF WALL

H =8'-4"
JUNCTION WITH SILL/LINTEL BAND REMARKS

H/2
...................................................................
...................................................................
...................................................................
...................................................................
A
...................................................................
...................................................................
Beam Beam ...................................................................
...................................................................
14" ...................................................................
3" 3" ...................................................................

H/4 + B/2
10mmØ @ 4"c/c
1'-8"

3 NOS.
1"

10Ø BAR
10mmØ @ 4"c/c 10mmØ @ 4"c/c 10mmØ @ 4"c/c
12"
14"

STRUCTURAL DRAWING

B=1'-8"
Beam bars SCALE: 1/16" = 1'-0"
1"

Column Column
Column bars Column bars
BEAM

JOINT OF THE EDGE COLUMN & BEAM JOINT OF THE SIDE COLUMN & BEAM
Scale: 3/32" = 1'-0"
PROFILE OF COLUMN SHEET NUMBER ST32
Scale: 3/16" = 1'-0" OCTOBER 2021

Adp-Ksa-Sol-Dwg-El-Td-Det-419 Cafe Counter Detail 2 - Rev.01
100% (1)
Adp-Ksa-Sol-Dwg-El-Td-Det-419 Cafe Counter Detail 2 - Rev.01
1 page
Uk Drawing Jan09 PDF
100% (2)
Uk Drawing Jan09 PDF
17 pages
Terrace (RCC Slab) +9150 SSL: General Notes
No ratings yet
Terrace (RCC Slab) +9150 SSL: General Notes
1 page
Stru DWG Aldar
No ratings yet
Stru DWG Aldar
19 pages
06 13025 - S - Torrance Transit Center - Backcheck 1 - Structural - 2017-04-10 PDF
No ratings yet
06 13025 - S - Torrance Transit Center - Backcheck 1 - Structural - 2017-04-10 PDF
49 pages
Victoria Admin Buildin Structural Drawings
No ratings yet
Victoria Admin Buildin Structural Drawings
50 pages
Item 2.2 - 2005 Rock Street
No ratings yet
Item 2.2 - 2005 Rock Street
39 pages
Design of Proposed 2 Storied Residential Building
No ratings yet
Design of Proposed 2 Storied Residential Building
44 pages
Gate House
No ratings yet
Gate House
1 page
2019A26 SD Jali Staircase
No ratings yet
2019A26 SD Jali Staircase
1 page
3.HVAC LAYOUT - 1-Model
No ratings yet
3.HVAC LAYOUT - 1-Model
1 page
Auto CAD 2D Drawing Project
No ratings yet
Auto CAD 2D Drawing Project
13 pages
Appendix A-List of DWG
0% (1)
Appendix A-List of DWG
51 pages
Architectural Drawings
No ratings yet
Architectural Drawings
1 page
Staircase Detail
No ratings yet
Staircase Detail
1 page
Structural Drawing (Update)
No ratings yet
Structural Drawing (Update)
29 pages
Architectural Drawing Checklist
No ratings yet
Architectural Drawing Checklist
1 page
Structural Details
No ratings yet
Structural Details
1 page
Dob Approved Plans 69 Mapleton App000283 151028
No ratings yet
Dob Approved Plans 69 Mapleton App000283 151028
29 pages
Kurdonia Structural Drawings
100% (1)
Kurdonia Structural Drawings
57 pages
147 Structure
No ratings yet
147 Structure
21 pages
A2-Ax701-Windows - Door Types - Details-Ax701
No ratings yet
A2-Ax701-Windows - Door Types - Details-Ax701
1 page
Zaha Hadid
No ratings yet
Zaha Hadid
12 pages
Architectural Conformed Set Landmarked
No ratings yet
Architectural Conformed Set Landmarked
66 pages
A17018 Structural Drawings
No ratings yet
A17018 Structural Drawings
10 pages
ប្លង់លម្អិតសរសៃដែកជើងតាង 3
No ratings yet
ប្លង់លម្អិតសរសៃដែកជើងតាង 3
14 pages
MAGDY Final - BASEMENT
No ratings yet
MAGDY Final - BASEMENT
4 pages
Second Floor RCP - R1-Second Floor RCP
No ratings yet
Second Floor RCP - R1-Second Floor RCP
1 page
Architectural Technical Drawing-08
No ratings yet
Architectural Technical Drawing-08
45 pages
Ebenezer Primary Revised Structural.
No ratings yet
Ebenezer Primary Revised Structural.
3 pages
Notes: Roof: Concrete Roof Tiles On Trusses
No ratings yet
Notes: Roof: Concrete Roof Tiles On Trusses
1 page
Pad Footing Detail-2 (B) 1
No ratings yet
Pad Footing Detail-2 (B) 1
1 page
Flat Roof Detail Working Drawing
No ratings yet
Flat Roof Detail Working Drawing
1 page
Detailed Floor Plans
No ratings yet
Detailed Floor Plans
6 pages
Homework 4 Structural Drawings
No ratings yet
Homework 4 Structural Drawings
51 pages
Aira Condominium - Original
No ratings yet
Aira Condominium - Original
21 pages
Structural Design Drawings 1706754285
No ratings yet
Structural Design Drawings 1706754285
29 pages
2021 08 26 Drawings Godown
No ratings yet
2021 08 26 Drawings Godown
14 pages
Pile Cap - 2
100% (1)
Pile Cap - 2
4 pages
Flat Roof Construction Manual
0% (1)
Flat Roof Construction Manual
3 pages
G.f.roof Beam & Slab Detail
No ratings yet
G.f.roof Beam & Slab Detail
1 page
LMW Engineering Group, LLC.: Revision Comment No. Date
No ratings yet
LMW Engineering Group, LLC.: Revision Comment No. Date
16 pages
Building Permit Checklist
No ratings yet
Building Permit Checklist
28 pages
Working Drawings
No ratings yet
Working Drawings
6 pages
Full Set Structural Drawing-26 Feb-2025
No ratings yet
Full Set Structural Drawing-26 Feb-2025
46 pages
Floor Details
No ratings yet
Floor Details
1 page
Shoring Layout
No ratings yet
Shoring Layout
1 page
Planning and Designers Handbook
No ratings yet
Planning and Designers Handbook
173 pages
Shir Khan House Architecture File 6t
No ratings yet
Shir Khan House Architecture File 6t
27 pages
Cable and Tensile
No ratings yet
Cable and Tensile
25 pages
Midlanding: +2100 LVL 181716151413121110 R 150mm. T 300mm
No ratings yet
Midlanding: +2100 LVL 181716151413121110 R 150mm. T 300mm
1 page
Eftm India Company Profile
No ratings yet
Eftm India Company Profile
9 pages
Produced by An Autodesk Educational Product: X As/Site
No ratings yet
Produced by An Autodesk Educational Product: X As/Site
1 page
" Proposed Two-Storey Residence " Mr. & Mrs. Arcadio P. Sulit
No ratings yet
" Proposed Two-Storey Residence " Mr. & Mrs. Arcadio P. Sulit
1 page
Architectural Plan
No ratings yet
Architectural Plan
1 page
Ed Edilberto Re Final Jajajaja1
No ratings yet
Ed Edilberto Re Final Jajajaja1
1 page
Maitama Apartments - Working Drawings Gate House and Fence
No ratings yet
Maitama Apartments - Working Drawings Gate House and Fence
3 pages
Archi & Structure Drawing
No ratings yet
Archi & Structure Drawing
39 pages
Baneswor Commercial UPDATED - 11-22 - Sanitary - Working Drawing
No ratings yet
Baneswor Commercial UPDATED - 11-22 - Sanitary - Working Drawing
17 pages
Baneswor Commercial 11-22 Revised - Architecture Working Drawing
No ratings yet
Baneswor Commercial 11-22 Revised - Architecture Working Drawing
16 pages
Mr. Shankar Laudari - Structural Report 5.6.2022
No ratings yet
Mr. Shankar Laudari - Structural Report 5.6.2022
49 pages
Laxmi Devi Singh Structural Report
No ratings yet
Laxmi Devi Singh Structural Report
48 pages
Yog Raj Sharma Structural Report (Repaired)
No ratings yet
Yog Raj Sharma Structural Report (Repaired)
51 pages
Isha Rana Structural Report
No ratings yet
Isha Rana Structural Report
59 pages
Lokeshwori Regmi
No ratings yet
Lokeshwori Regmi
12 pages
Soil Report of Surendra Shahi, Dhangadhi
No ratings yet
Soil Report of Surendra Shahi, Dhangadhi
50 pages
Bipin Acharya Footing-Design
No ratings yet
Bipin Acharya Footing-Design
30 pages
Isha Rana Structural Report NBC
No ratings yet
Isha Rana Structural Report NBC
61 pages
Dinesh Slab
No ratings yet
Dinesh Slab
12 pages
Hotel Sathi Casiino Structural Report
No ratings yet
Hotel Sathi Casiino Structural Report
43 pages
Bipin Acharya Staircase
No ratings yet
Bipin Acharya Staircase
10 pages
Tilak Raj Kandel Main Block Structural Report
No ratings yet
Tilak Raj Kandel Main Block Structural Report
71 pages
Raunak Kadel Cantilever Slab
No ratings yet
Raunak Kadel Cantilever Slab
11 pages
Pawnit Mohapal Structural Report
No ratings yet
Pawnit Mohapal Structural Report
60 pages
Connection Design Mohapal
No ratings yet
Connection Design Mohapal
55 pages
Base Plate - Other Column
No ratings yet
Base Plate - Other Column
9 pages
1 Structure
No ratings yet
1 Structure
30 pages
Bimal Slab
No ratings yet
Bimal Slab
12 pages
New Microsoft Word Document
No ratings yet
New Microsoft Word Document
2 pages
Wind Load Calc
No ratings yet
Wind Load Calc
8 pages
Thesis Geralyn
No ratings yet
Thesis Geralyn
20 pages
VTU MCA .NET Notes
94% (16)
VTU MCA .NET Notes
143 pages
Mozilla Thunderbird Cheat Sheet: Basic Search Keyboard Shortcuts
No ratings yet
Mozilla Thunderbird Cheat Sheet: Basic Search Keyboard Shortcuts
1 page
Business Math Week 5
No ratings yet
Business Math Week 5
9 pages
As 3899-2002 Higher Rank Coal and Coke - Bulk Density
No ratings yet
As 3899-2002 Higher Rank Coal and Coke - Bulk Density
8 pages
DACOR RSE30S Classic Failure Codes
No ratings yet
DACOR RSE30S Classic Failure Codes
2 pages
Flexi8.0 Help Manual
100% (1)
Flexi8.0 Help Manual
182 pages
Determination of Chloride (CL) : Gargi Memorial Institute of Technology
100% (1)
Determination of Chloride (CL) : Gargi Memorial Institute of Technology
2 pages
980E-4 Lubrication and Electrical Maintenance - 1
No ratings yet
980E-4 Lubrication and Electrical Maintenance - 1
25 pages
DTC Sim Plan 200524 260524
No ratings yet
DTC Sim Plan 200524 260524
9 pages
Mobile - Cooler (1) Mohan
No ratings yet
Mobile - Cooler (1) Mohan
54 pages
Taylor Swift - Tekst You're Losing Me - PL
No ratings yet
Taylor Swift - Tekst You're Losing Me - PL
1 page
Edison Fuse Links Catalog Ca132008en
No ratings yet
Edison Fuse Links Catalog Ca132008en
12 pages
Kal Callouts
No ratings yet
Kal Callouts
5 pages
Time Spent
No ratings yet
Time Spent
2 pages
Case Study Arch Bridge
No ratings yet
Case Study Arch Bridge
4 pages
Moonlight Restaurant BRM
No ratings yet
Moonlight Restaurant BRM
11 pages
Broward+Ordinance+No +2022-21
No ratings yet
Broward+Ordinance+No +2022-21
5 pages
Current Trends in Indian Architecture
No ratings yet
Current Trends in Indian Architecture
11 pages
User Manual Casio G-Shock GA-140GB-1A2ER (English - 8 Pages)
No ratings yet
User Manual Casio G-Shock GA-140GB-1A2ER (English - 8 Pages)
3 pages
Đề Cương KTCT 8-2023
No ratings yet
Đề Cương KTCT 8-2023
7 pages
BSBFIN601 Project 2 Appendix A
No ratings yet
BSBFIN601 Project 2 Appendix A
8 pages
A Practical Guide To Using A Bitscope
No ratings yet
A Practical Guide To Using A Bitscope
7 pages
Chemistry 2024 25
No ratings yet
Chemistry 2024 25
3 pages
Managerial Economics Assignment 2
No ratings yet
Managerial Economics Assignment 2
4 pages
Soal Um Bahasa Inggris Min 1 SMG
No ratings yet
Soal Um Bahasa Inggris Min 1 SMG
3 pages
Résumé of Dr. Francis Joseph O'Brien, Jr. Researcher & Educator
100% (3)
Résumé of Dr. Francis Joseph O'Brien, Jr. Researcher & Educator
3 pages
Contingency Procedure
No ratings yet
Contingency Procedure
27 pages
3 Common Cooling Tower Problems
100% (1)
3 Common Cooling Tower Problems
5 pages
Stock Register - 2
No ratings yet
Stock Register - 2
6 pages