0% found this document useful (0 votes)
47 views8 pages

Digital Control Systems June 2022

Uploaded by

HOD EEE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
47 views8 pages

Digital Control Systems June 2022

Uploaded by

HOD EEE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Code No: R1932024 R19 SET - 1

III B. Tech II Semester Regular Examinations, June-2022


DIGITAL CONTROL SYSTEMS
(Electrical and Electronics Engineering)
Time: 3 hours Max. Marks: 75
Answer any FIVE Questions ONE Question from Each unit
All Questions Carry Equal Marks
*****
UNIT-I
1. a) State sampling theorem. Explain how an analog signal can be [8M]
reconstructed.
b) Mention various advantages and disadvantages of digital [7M]
control systems.
(OR)
2. a) What is the significance of sample and hold circuit? Explain the [8M]
following parameters for sample and hold:
(i) Acquisition time
(ii) Aperture time
(iii) Settling time
(iv) Hold-mode droop
b) Describe frequency-domain characteristics of a zero-order hold. [7M]
UNIT-II
3. a) State and prove the following theorems of z-transforms: [8M]
(i) Shifting theorem (ii) Initial-value theorem

b) Obtain the inverse z-transform of the following: [7M]


𝑧 −3 𝑧 −1 (1−𝑧 −2 )
(i) 𝑋(𝑧) = (1−𝑧 −1 )(1−0.2𝑧 −1 ) (ii) 𝑋(𝑧) = (1+𝑧 −2 )2

(OR)
4. a) The input and output of a sampled data system is given by the [8M]
difference equation
𝑦(𝑘 + 2) + 3𝑦(𝑘 + 1) + 4𝑦(𝑘) = 𝑟(𝑘)
Determine the pulse transfer function. The initial conditions
are y(0) = 0, y(1) = 1.
b) State and prove differentiation in z-domain property of [7M]
z-transform.
UNIT-III
5. a) Explain any one method of evaluation of state transition matrix. [8M]
b) What is the importance of eigenvalues and state transition [7M]
matrix? Explain.
1 of 2

|'''|'|'|''||'''||||
Code No: R1932024 R19 SET - 1

(OR)
6. a) Investigate the controllability and observability of the following [8M]
system:
𝑥1 𝑘 + 1 0 1 𝑥1 𝑘 1
= + u(k)
𝑥2 𝑘 + 1 −4 −4 𝑥2 𝑘 0
𝑦1 𝑘 1 0 𝑥1 𝑘
=
𝑦2 𝑘 0 1 𝑥2 𝑘

b) Explain the discretization of continuous-time state equations. [7M]


UNIT-IV
7. a) Using Jury‟s stability criterion, determine the stability of the [8M]
following discrete-time systems:
(i) 𝑧 3 + 3.3𝑧 2 + 4𝑧 + 0.8 = 0 (ii) 𝑧 3 − 1.1𝑧 2 − 0.1𝑧 + 0.2 = 0
b) Describe the primary strips and complementary strips. [7M]
(OR)
8. a) Use the Routh-Hurwitz criterion to find the stable range of K for [8M]
the closed-loop unity feedback system with loop gain
𝐾(𝑧 − 1)
𝐹(𝑧) =
(𝑧 − 0.1)(𝑧 − 0.8)

b) Explain the mapping between s-plane and z-plane. [7M]


UNIT-V
9. a) The closed loop transfer function for the digital control system [8M]
C ( z) z  0.5
is given as  . Find the steady state errors
R( z ) 3( z  z  0.5)
2

and error constants due to step input.


b) Write the design procedure of lag compensator in w-plane. [7M]

(OR)
10. a) The open loop transfer function of a unity feedback digital [8M]
K ( z  0.5) ( z  0.2)
control system is given as G( z ) 
( z  1) ( z 2  z  0.5)
Sketch the root loci of the system for 0 < 𝐾 < ∞. Indicate all
important information on the root loci.
b) List out the steady state specifications. And explain them [7M]
briefly.

*****
2 of 2

|'''|'|'|''||'''||||
Code No: R1932024 R19 SET - 2
III B. Tech II Semester Regular Examinations, June-2022
DIGITAL CONTROL SYSTEMS
(Electrical and Electronics Engineering)
Time: 3 hours Max. Marks: 75
Answer any FIVE Questions ONE Question from Each unit
All Questions Carry Equal Marks
*****

UNIT-I
1. a) Explain digital control systems with proper block diagrams. [7M]
b) Distinguish continuous-time and discrete-time signals with [4M]
examples.
c) Specify various advantages of digital control systems. [4M]
(OR)
2. a) What is the necessity of sample and hold? Sketch the block [8M]
diagram of sample and hold, and explain its principle of
operation.
b) Explain the conditions to be satisfied for reconstruction of a [7M]
continuous-time signal from sampled signal.
UNIT-II
3. a) State and prove any two theorems of z-transforms. [8M]
b) Obtain the inverse z-transform of the following in the closed [7M]
form:
0.368𝑧 2 +0.478𝑧+0.154 𝑧+2
(i) 𝐹1 = (ii) 𝐹2 =
𝑧 2 (𝑧−1) 𝑧 2 (𝑧−2)
(OR)

4. a) Given the z-transform X(z) =


1−𝑒 −𝑎𝑇
, where “a” is constant [8M]
𝑧−1 𝑧−𝑒 −𝑎𝑇
and “T ” is sampling period, determine inverse z transform
𝑥 (𝑘 𝑇) by the use partial fraction expansion method.
b) Obtain the relationship between z- and s-domain. [7M]
UNIT-III
5. a) Obtain the state space representation of discrete time systems [8M]
using Jordan canonical form.
b) Consider the discrete control system represented by the [7M]
1+0.8𝑧 −1
following transfer function: G(z) = 1−𝑧 −1 +0.5𝑧 −2 .
Obtain the state representation of the system in the observable
canonical form. Also find its state transition matrix.

1 of 2

|'''|'|'|''||'''||||
Code No: R1932024 R19 SET - 2

(OR)
6. a) Describe the design of reduced order state observer with a neat [8M]
block diagram.
b) Explain the necessary and sufficient conditions for pole [7M]
placement.
UNIT-IV
7. a) Discuss the stability analysis of discrete control system using [8M]
modified Routh stability.
b) Explain in detail about primary and complementary strips. [7M]
(OR)
8. a) Construct the Jury stability table for the following [8M]
characteristic equation P(z) = 𝑎0 𝑧 4 + 𝑎1 𝑧 3 + 𝑎2 𝑧 2 + 𝑎3 𝑧 + 𝑎4
where a0>0. Write the stability conditions.
b) Describe the mapping between s-plane and z-plane. [7M]
UNIT-V
9. a) The open loop transfer function of a unity-feedback digital [8M]
𝐾(𝑧 2 +0.8𝑧+0.5)
control system is given as F(z) = . Sketch the root
(𝑧−1)(𝑧 2 −𝑧+0.2)
loci of the system for 0 < 𝐾 < ∞. Indicate all important
information on the root loci.
b) List out the transient response specifications and explain in [7M]
brief.
(OR)
10. a) Derive the transfer function of lead compensator. [8M]

b) Write the expressions for static position error constant and [7M]
steady state error in response to a unit step input in discrete
time systems.

*****

2 of 2

|'''|'|'|''||'''||||
Code No: R1932024 R19 SET - 3

III B. Tech II Semester Regular Examinations, June-2022


DIGITAL CONTROL SYSTEMS
(Electrical and Electronics Engineering)
Time: 3 hours Max. Marks: 75
Answer any FIVE Questions ONE Question from Each unit
All Questions Carry Equal Marks
*****

UNIT-I
1. a) Distinguish analog and digital control systems. [8M]
b) Illustrate the step motor control discrete data control system. [7M]
(OR)
2. a) Explain frequency domain characteristics of zero order hold [8M]
circuit.
b) Explain how sampling theorem can be used for data [7M]
reconstruction.
UNIT-II
3. a) Explain how inverse z-transform can be obtained using partial [8M]
fraction expansion method.
b) Obtain the z-transform of x(t) = 𝑡 2 𝑒 −𝑎𝑡 , where „a‟ is a constant. [7M]
(OR)
4. a) Explain the procedure for obtaining the pulse transfer function [8M]
of a closed loop transfer function.
b) Consider the following pulse transfer function system: [7M]
𝑌(𝑧) 𝑧 −1 (1 + 0.8𝑧 −1 )
=
𝑈(𝑧) 1 + 1.3𝑧 −1 + 0.4𝑧 −2
Test the state controllability and observability.
UNIT-III
5. a) Obtain the state equations of discrete data systems with sample [8M]
and hold.
b) A discrete-time system has state equation [7M]
0 −1
𝑥 𝑘+1 = 𝑥(𝑘)
−5 −3
Use Cayley-Hamilton approach to find out its state transition
matrix.

1 of 2

|'''|'|'|''||'''||||
Code No: R1932024 R19 SET - 3

(OR)
6. a) Investigate the controllability and observability of the following [8M]
system.
𝑥1 𝑘 + 1 1 −1 𝑥1 𝑘 1
= + u(k)
𝑥2 𝑘 + 1 2 2 𝑥2 𝑘 0
𝑦1 𝑘 1 0 𝑥1 𝑘
=
𝑦2 𝑘 0 1 𝑥2 𝑘

b) State and prove the properties of state transition matrix. [7M]


UNIT-IV
7. a) Determine the stability of characteristic equation by using [8M]
Jury‟s stability tests
𝑧 4 − 1.2𝑧 3 + 0.07𝑧 2 + 0.3𝑧 − 0.08 = 0

b) Explain the primary strips and complementary strips? [7M]


(OR)
8. a) Explain in detail about modified Routh's stability criterion. [8M]
b) Use the Routh-Hurwitz criterion to find the stable range of 𝐾 for [7M]
the closed loop unity feedback system with loop gain
𝐾(𝑧−1)
F(z) = (𝑧−0.1)(𝑧−0.8) .
UNIT-V
9. a) Draw lag and lead compensators. Obtain their transfer [8M]
function.
b) Recall design procedure of lead compensator in the w-plane. [7M]

(OR)
10. a) Write the expressions for static position error constant and [5M]
steady state error in response to a unit step input in discrete
time systems.
b) The open loop transfer function of a unity-feedback digital [10M]
𝐾(𝑧 2 +0.8𝑧+0.5)
control system is given as F(z) = .Sketch the root
(𝑧−1)(𝑧 2 −𝑧+0.2)
loci of the system for 0 < 𝐾 < ∞. Indicate all important
information on the root loci.
*****

2 of 2

|'''|'|'|''||'''||||
Code No: R1932024 R19 SET - 4

III B. Tech II Semester Regular Examinations, June-2022


DIGITAL CONTROL SYSTEMS
(Electrical and Electronics Engineering)
Time: 3 hours Max. Marks: 75
Answer any FIVE Questions ONE Question from Each unit
All Questions Carry Equal Marks
*****

UNIT-I
1. a) Explain in detail the process of sampling and reconstruction of [8M]
signals.
b) Explain frequency-domain characteristics of zero order hold [7M]
circuit.
(OR)
2. a) Explain in detail the advantages of digital systems. [8M]
b) Explain the digital controller for a turbine and generator [7M]
discrete data control systems.
UNIT-II
3. a) Explain different methods of finding inverse z-transform. [8M]
b) Illustrate the procedure for obtaining the pulse transfer [7M]
function of a closed-loop system with a neat block diagram.
(OR)
4. a) Given the z-transform X(z) =
1−𝑒 −𝑎𝑇
, where “a” is constant [8M]
𝑧−1 𝑧−𝑒 −𝑎𝑇
and “T ” is sampling period, determine inverse z-transform
𝑥 (𝑘 𝑇) by the use partial fraction expansion method.
b) Obtain the inverse z-transform of the following: [7M]
𝑧 −3 𝑧 −1 (1−𝑧 −2 )
(i) X(z)=(1−𝑧 −1 )(1−0.2𝑧 −1 ) and (ii) X(z) = (1+𝑧 −2 )2

UNIT-III
5. a) Explain concepts of controllability and observability. [8M]
b) Describe necessary and sufficient conditions of pole placement [7M]
method.
(OR)
6. a) What is the necessity of state transition matrix and specify its [8M]
properties.
b) Explain the design of full order state observer with a neat block [7M]
diagram.

1 of 2

|'''|'|'|''||'''||||
Code No: R1932024 R19 SET - 4

UNIT-IV
7. a) Explain the mapping between s-plane and z-plane. [8M]
b) Determine the stability of characteristics equation by using [7M]
Jury‟s stability tests 𝑧 3 − 0.2𝑧 2 − 0.25𝑧 + 0.05 = 0.
(OR)
8. a) Elaborate on modified Routh's stability criterion. [8M]
b) Write difference between primary strips and complementary [7M]
strips.
UNIT-V
9. a) Draw the circuit diagram for lag compensator. Obtain its [8M]
transfer function.
b) Explain the design procedure of lead compensator using root [7M]
locus technique in the z-plane.
(OR)
10. a) The closed loop transfer function for the digital control system [8M]
C ( z) z  0.5
is given as  .
R( z ) 3( z  z  0.5)
2

Find the steady state errors and error constants due to step
input.
b) Derive the transfer function of lead compensator. [7M]

*****

2 of 2

|'''|'|'|''||'''||||

You might also like