Technical Data Sheet
PE LL30200 FE
Linear Low-Density Polyethylene
PRODUCT DESCRIPTION
LL30200 FE is a butene linear low-density polyethylene. The product is characterized by an optimum
combination of excellent optical and high thermal stability. This resin is suitable for high speed extrusion
process. Films made from this resin exhibit excellent transparency and good combination of physical and
mechanical properties.
TYPICAL APPLICATIONS
LL30200 FE is recommended for cast film applications, especially for the production of hand and pallet stretch
wrap.
Properties Conditions Method Typical values* Units
Resin properties
Melt Flow Rate 190 oC/2.16 kg ISO 1133 3 g/10 min
Density ISO 1183 0.920 g/cm3
Film properties measured on 20 µm film
Tensile Strength at Break MD/TD ISO 527-1 30/19 MPa
Elongation at Break MD/TD ISO 527-1 550/750 %
Tensile Stress at Yield MD/TD ISO 527-1 10/8 MPa
Tear Strength MD/TD ASTM D1922 100/300 g/25 µm
Dart Drop Impact Strength ASTM D1709 90 g
Haze ASTM D 1003 1 %
Gloss (45 °C) ASTM D 2457 95 ‰
Thermal
o
Vicat Softening Temperature 10 N ISO 306 97 C
*The values given are typical values measured on the product. These values should not be considered as specification.
**Properties were measured on film extruded with a melt temperature of 260 °C.
REACH Statement
Polymers are exempt of REACH registration. However, their raw materials which mean monomers and relevant
additives have been registered.
PJSC «Sibur Holding» (and its subsidiaries) is committed to fully respect REACH legislation and to use only
REACH compliant raw materials.
January 2021
Safety
See MSDS
Contact
PJSC «Sibur Holding» European Sales Office
Basic Polymers Division Sibur International GmbH
3-16, Krzhizhanovskogo St. Prinz Eugen Straße 8-10
117997, Moscow, Russian Federation 1040, Vienna, Austria
Tel.: ++7 495 7775500 Tel.: ++43 1 370 8000
E-mail:
[email protected] E-mail:
[email protected]Turkey Sales Office Chinese Sales Office
SIBUR Istanbul Uluslararası Tic. Ltd. Şti. SIBUR International Trading (Shanghai)Co., Ltd
Ferko Signature Levent Rm.62T70, SWFC, Century Ave.100 Pudong New
Esentepe, Büyükdere Cd. No:175, 4.Kat / A25 Area, 200120, Shanghai, China
34394 Şişli, Istanbul, Turkey Tel: ++86 021 2206 5066 ext 215
Tel: ++90 212 465 2321 E-mail:
[email protected]E-mail:
[email protected]The product(s) mentioned herein are not intended to be used for medical, pharmaceutical or healthcare
applications and we do not support their use for such applications. To the best of our knowledge, the
information contained herein is accurate and reliable as of the date of publication, however we do not
assume any liability whatsoever for the accuracy and completeness of such information. PJSC «Sibur
Holding» (and its subsidiaries) makes no warranties which extend beyond the description contained
herein. Nothing herein shall constitute any warranty of merchantability or fitness for a particular purpose.
It is the customer's responsibility to inspect and test our products in order to satisfy itself as to the
suitability of the products for the customer's particular purpose. The customer is responsible for the
appropriate, safe and legal use, processing and handling of our products. No liability can be accepted in
respect of the use of any PJSC «Sibur Holding» (and its subsidiaries) product in conjunction with any
other products and/or materials. The information contained herein relates exclusively to our products
when not used in conjunction with any other material unless as specifically provided for in the test
methods stated above.
January 2021
