Technical Data Sheet
PE HD40552 IM
High-Density Polyethylene
PRODUCT DESCRIPTION
PE HD40552 IM is a high-density hexene copolymer with a narrow molecular weight distribution. The enhanced
properties and anti-UV formulation give the product an advantageous combination of good processabilty and
improved mechanical characteristics. Articles produced from this grade show rigidity, good impact strength and
high environment stress crack resistance (ESCR).
TYPICAL APPLICATIONS
PE HD40552 IM is recommended for Injection Molding applications such as large dustbins and pails, pallet
boxes, crates and technical items.
Properties Conditions Method Typical values* Units
Rheology
Melt Flow Rate 190 oC/2.16 kg ISO 1133-1 4 g/10 min
Physical
Density ISO 1183 0.955 g/cm3
Mechanical
Tensile Stress at Yield ISO 527-1 27 MPa
Elongation at Break ISO 527-1 1000 %
Flexural Modulus ISO 178 1200 MPa
Impact
ESCR F50, 100% ASTM D1693 >40 hours
Charpy Notched Impact Strength ISO 179 8 kJ/m2
Thermal
o
Vicat Softening Temperature 10 N ISO 306 121 C
*The values given are typical values measured on the product. These values should not be considered as specification.
January 2019
REACH Statement
Polymers are exempt of REACH registration. However, their raw materials which mean monomers and relevant
additives have been registered.
PJSC «Sibur Holding» (and its subsidiaries) is committed to fully respect REACH legislation and to use only
REACH compliant raw materials.
Safety
See MSDS
Contact
PJSC «Sibur Holding» European Sales Office
Basic Polymers Division Sibur International GmbH
3-16, Krzhizhanovskogo St. Prinz Eugen Straße 8-10
117997, Moscow, Russian Federation 1040, Vienna, Austria
Tel.: ++7 495 7775500 Tel.: ++43 1 370 8000
E-mail:
[email protected] E-mail:
[email protected]Turkey Sales Office Chinese Sales Office
SIBUR International Trading Istanbul SIBUR International Trading (Shanghai)Co., Ltd
EGS Business Park, B1 Blok, Kat.9, No.318 Yeşilköy, Rm.62T70, SWFC, Century Ave.100 Pudong New
Bakırköy Area, 200120, Shanghai, China
Istanbul, Turkey Tel: ++86 021 2206 5066 ext 215
Tel: ++90 212 465 2321 E-mail:
[email protected]E-mail:
[email protected]The product(s) mentioned herein are not intended to be used for medical, pharmaceutical or healthcare
applications and we do not support their use for such applications. To the best of our knowledge, the
information contained herein is accurate and reliable as of the date of publication, however we do not
assume any liability whatsoever for the accuracy and completeness of such information. PJSC «Sibur
Holding» (and its subsidiaries) makes no warranties which extend beyond the description contained
herein. Nothing herein shall constitute any warranty of merchantability or fitness for a particular purpose.
It is the customer's responsibility to inspect and test our products in order to satisfy itself as to the
suitability of the products for the customer's particular purpose. The customer is responsible for the
appropriate, safe and legal use, processing and handling of our products. No liability can be accepted in
respect of the use of any PJSC «Sibur Holding» (and its subsidiaries) product in conjunction with any
other products and/or materials. The information contained herein relates exclusively to our products
when not used in conjunction with any other material unless as specifically provided for in the test
methods stated above.
January 2019
