Q U I C K S TA R T G U I D E

INDEX

KNOW YOUR SCOOTER 01

ON THE ROAD 14

CHARGING 31

SCOOTER SHUTDOWN 37

CARING FOR YOUR SCOOTER 39

Ather 450STM was crafted with obsessive attention
to detail. It was designed from the ground up to
make urban stop-and-go traffic more bearable. But
before you get on the easy, comfy ride, here’s
everything you need to know.

This quick start guide will tell you all about the
features and components of the Ather 450S, the
Ather AppTM, the battery pack and the Ather DotTM.

This guide helps you get going, the moment you

receive your Ather 450S keys.
THE TWO BIG WORDS

WARNING indicates something that could hurt

you or others.

The other one is CAUTION, it indicates something

that could harm your scooter.
WARNING

• FIRST AND FOREMOST

Read this thoroughly before your first ride. So many

things are new. Once you understand all the
controls and features, you’ll be ready to hit the road.

• MAINTENANCE IS A MUST

Along with good ride handling skills, regular

inspection and maintenance are essential for a
great experience. Following these simple rules will
make sure that your warranty stays intact.

• NO TINKERING

We know you wouldn’t mess around with the high

voltage components like the battery pack, motor
etc. Still we need to put on paper that they should
be serviced only by Ather technicians.
1

KNOW
YOUR
ATHER
CLOSELY
 LEFT SIDE VIEW

11
3
10

8
4

5
7
6

1 Rear view mirror 7 Pillion footrest

2 Integrated indicator lamps 8 Saree guard

3 Head lamp 9 Rear fender number plate mount

4 Alloy wheels 10 Rear side panel

5 Front disc brake 11 Tail and indicator lamps

6 Side stand with sensor

Know your scooter 1

 RIGHT SIDE VIEW

10

4
8

6 7

1 Pillion grabrail 6 Drive belt

2 Rear side panel 7 Pulley

3 Rear suspension 8 Front fork suspension

4 Swing arm 9 Floating panel

5 Rear disc brake 10 Accelerator grip

Know your scooter 2

 DASHBOARD
AND SWITCHGEAR - I

1
2
3
7

4
5

1 DeepViewTM Display 6 RHS grip/accelerator

2 Joystick 7 Front brake lever

3 LHS grip & switchgear

4 Charging port

5 Luggage hook

Know your scooter 3

DASHBOARD
AND SWITCHGEAR - II

7
1

8
2

6
3
5
4

1 Headlight high/low beam switch 6 Mode change switch

2 Combined braking system 7 Motor kill switch

3 Turning indicator 8 Park AssistTM

4 Horn

5 Motor starter

Disclaimer: Riding modes available only with the Pro.

Know your scooter 4

SWITCHGEAR:
LEFT-HAND SIDE

HORN

Press this switch when you need to sound the horn.

TURNING INDICATOR

Toggle this switch left/right to turn ON the indicator

lights. They turn OFF automatically once the turn is
complete. Press the center to turn OFF the
indicator manually.

HIGH BEAM SWITCH

This switch turns on the high beam headlight. Avoid

using this by default for the convenience of others
on the road.

COMBINED BRAKING SYSTEM

The lever on the left-hand side activates the

Combined Braking System that applies brakes to
both the wheels.

Disclaimer: Auto turn indicator is only available with the Pro.

Know your scooter 5

JOYSTICK

Use the joystick to navigate through Bluetooth

controls, charging controls, ride and feature
settings.

Disclaimer: Some Bluetooth, ride and feature settings are available only
with the Pro.

Know your scooter 6

SWITCHGEAR:
RIGHT-HAND SIDE

MOTOR STARTER

Turns the motor ON, and kickstarts the scooter.

It also changes directions when using Park AssistTM.

TOGGLE SWITCH

Switches between riding modes displayed on the

screen with a left/right toggle, when the key is ON.
Changes the mode while riding as well. To do so,
the throttle has to be at zero state.

KILL SWITCH

Disables the motor controller to help you be extra

sure that the motor is OFF when you need to halt.

Know your scooter 7

ACCELERATOR GRIP

Controls the acceleration and speed of the scooter.

It also activates regenerative braking when twisted
in the reverse (anti-clockwise) direction.

FRONT BRAKE LEVER

Actuates the front brake to control the speed of the

scooter.

PARK ASSISTTM

Engages Park AssistTM mode when stationary.

Disclaimer: Bluetooth controls are available only with the Pro.

Know your scooter 8

UNDER-SEAT STORAGE

Smartly designed to accommodate a full-sized

helmet, it also has an LED strip lamp so that finding
things in poorly lit parking spaces is easier. Carry up
to 15 kg and a volume of 22L.

LED

CAUTION

Do not overfill the under-seat storage. A simple

check: the seat should close effortlessly when you
drop it down. If you need to press it down, it’s
over-packed and there is a high possibility that it
gets damaged.

Know your scooter 9

CAUTION

The storage box is built to be rain-proof. But water

can seep through if a pressure jet wash is used to
clean the scooter. Remember to empty the
under-seat storage before washing. Always store
the portable charger in its cover to protect it from
water leaks.

SCOOTER IDENTIFICATION NUMBER (VIN) /

CHASSIS NUMBER

Each scooter has a unique VIN. On the Ather 450S, it

is engraved on the chassis. Remove the rubber
grommet in the under-seat storage to access it.

It’s a 17 digit number in this format: MYH

XXXXXXXXXXXXXX

Know your scooter 10

 1

MOTOR SERIAL NUMBER

Can be spotted at the bottom of the scooter, on the

motor itself.

KEY CODE NUMBER

Mentioned on the key.

Know your scooter 11

ATHER APP TM

APP INSTALLATION

• Download the Ather AppTM from the Google Play

Store or Apple App Store.
• Use the login credentials of your Ather portal
account to login to the app.
• The app syncs with the scooter only when both
your phone and the scooter have good network
coverage. The app displays the time when they
were last synced.

FAST CHARGING AT ATHER GRID

To locate an Ather Grid public fast charging point,

go to the app or navigation screen.

Disclaimer: All Ather ConnectTM features on the app are available only
with the Pro.

Know your scooter 12

2

TIME TO
GET ON
THE ROAD
JUST BEFORE YOU GET ON
THE SCOOTER

THE CHECKLIST

• Tyre pressure & condition

• Drive belt (No slacking)
• Charge status
• Peripherals: Horn, headlights, pilot lamps,
indicators and tail lights
• Screen intactness
• Rear view mirror position
• Smooth functioning of the handlebar (twist & turn
to check if it is normal)
• Perfectly working brakes

RECOMMENDED TYRE PRESSURE

•Solo rider:
30 PSI front & 28 PSI back

•With a pillion:
30 PSI front & 32 PSI back

On the road 14
THINGS TO KEEP
IN MIND

STRONG AND SILENT MOTOR

So silent, you won’t even realise it’s running. Keep

an eye on the dashboard for the motor OFF/ON
indicator. Use the kill switch whenever at signals to
avoid accidents from any unintended acceleration.

SUPER RESPONSIVE BRAKES

Both the wheels have pretty responsive disc brakes.

So press the brakes gently, until you get used to
them.

HYPER QUICK MOTOR

Electric motors have a higher torque, which means

the acceleration will be quick and sudden. Take it
easy on the accelerator till you get a hang of it.

On the road 15
GOOD (AND NEW) THINGS TAKE TIME

Park AssistTM is something new. The speed while

going forward is 5 km/h and 3 km/h in reverse. It’s
just better to be extra careful to make sure that
nobody gets hurt.

On the road 16
SAFETY AND OPERATING
INSTRUCTIONS

• As a precaution, wear appropriate safety gear

while riding: a helmet that conforms to prescribed
standards, eye protection gear, riding boots and
gloves.

• Do not consume alcohol or drugs that affect your

reflexes, before or while you are riding.

• Do not overload the floorboard. It can handle up to

30 kg of weight. We recommend that you distribute
the weight evenly for better ride handling.

• If you have been riding in the rain, wait for 15

minutes before plugging in the scooter. Wipe off the
water on the port using a soft, dry cloth.

• Never allow others to ride without proper

instructions and licences as per applicable state
laws.

• We strongly advise against any alteration or

modification, as they may cause safety hazards.

On the road 17
PRECAUTIONS FOR A
SAFE ELECTRIC RIDE

• In case of an accident, do not touch wiring

connectors or the wired components.

• In the highly unlikely event of a battery fire,

extinguish the flame by flooding it with a lot of water.
A water hose should be used, and the person doing
this must be at least a couple of metres away from
the scooter. Make sure the scooter is unplugged
from the charging point. If it isn’t, switch OFF the
main power supply immediately to cut off the
electricity flow.

• Once the fire is extinguished, keep flooding the

battery with water every 30 minutes, for up to 2
hours. Check on it at regular intervals for a few
hours to be extra sure that the fire doesn’t re-ignite.

On the road 18
CAUTION

Never lift the scooter by pulling the handlebar.

WARNING

In case of fire, please call customer support to let us

know and we will provide any assistance required.

A high voltage electronic

device

On the road 19
TURNING THE SCOOTER
ON AND RIDING

1 UNLOCK THE HANDLEBAR

Insert the key in the keyhole located under the

handlebar, on the right-hand side. Turn the key
clockwise, and it’s unlocked.

On the road 20
 2 OPEN THE UNDER-SEAT STORAGE

Once the handlebar is unlocked, turn the key

anti-clockwise to open the underseat storage. Take
your helmet out, wear it, simply drop the seat to lock
it. Check the seat lock once, just to be doubly sure.
Now you are all set for the ride!

On the road 21
 2

1 3

WARNING

The scooter makes no significant sound when the

motor is ON.

1 SWITCH ON THE DISPLAY

Once the key is turned ON, it will activate the

dashboard, showing the current time, available
range and riding modes.

Disclaimer: Range display and riding modes on the dashboard are only
available with the Pro.

On the road 22
 2 DISENGAGE KILL SWITCH

If the kill switch is engaged, the motor will not

switch ON.

3 ACTIVATE THE MOTOR

Press the brake lever (either one) and the motor

start switch on the right-hand side of the handlebar
to make the riding screen appear.

4 TOGGLE TO CHANGE RIDING MODE

Switch between Eco, Ride and Sport.

Disclaimer: Range display and riding modes on the dashboard are only
available with the Pro.

On the road 23
Brake (L)

Brake (R)

Indicator cancel
Start

1 PARK ASSISTTM

To move in reverse press the Park AssistTM button

when stationary. Slowly rev the throttle (RHS
handlebar) to start moving backwards. To move
forward in Park AssistTM, press the “Activate motor”
button before revving the throttle.

WARNING

Kick back the side stand, before you start riding. For
your safety, the motor gets activated only when the
side stand is disengaged.

On the road 24
MAINTAINING SPEED

Rev the accelerator throttle and use the brakes to

maintain speed. Avoid using both the accelerator
and the brake at the same time.

SLOWING DOWN AND BRAKING

Bring the throttle back to zero. Either use the

Combined Braking System or apply both brakes
simultaneously to bring the scooter to a halt. Use
the kill switch to turn the motor OFF, in case you plan
to stop for some time.

On the road 25
CAUTION

In wet weather, it takes longer to slow down or come

to a halt. Start braking a little earlier than you would
normally, especially when going around corners and
turning.

WARNING

Any unintended acceleration could injure you or

others on the road. Use the motor kill switch at any
traffic stop.

On the road 26
REGENERATIVE
BREAKING

Recover the scooter’s kinetic energy and convert it

to be stored in the battery. To activate Regenerative
Braking, the battery should be below 80% and
speed, above 20 km/h.

HOW TO ACTIVATE IT?

Press the brake levers or rev the throttle in the

opposite direction (anti-clockwise). Algorithms
dictate the amount of regen, depending on the
battery state and speed of the scooter.

REGEN DISABLED

Regen is disabled when the charge status is high

(higher the remaining range, lesser the regen) or
when the battery temperature is high.

CAUTION

The scooter can’t be brought to a halt using

regenerative braking as it gets activated only when
you’re going over 20 km/h.

On the road 27
CAUTION

The scooter may be throttled down to Eco Mode

when the battery charge is too low.

WARNING

In case of errors or glitches, performance may be

restricted to ensure the rider’s safety. If this
happens, please contact customer support
immediately.

Disclaimer: Riding modes are only in the Pro.

On the road 28
TURNING THE SCOOTER
OFF AND PARKING

STOPPING YOUR SCOOTER

Bring the accelerator throttle back to zero. Use the

kill switch to turn OFF the motor. Turn the key back
to the LOCK position and remove it.

If Guide-me-home Light is ON, the headlight will

switch OFF automatically in ~15 seconds.

Disclaimer: Guide-me-home Light is only available with the Pro.

On the road 29
CAUTION

The key should be removed anytime the scooter is

left unattended. You don’t want somebody
stealing it.

PARKING

Use your left foot to disengage the side stand.

Always engage the side stand when you’ve to park.
Also, always try to park on level and firm ground.

CAUTION

Park under shade wherever possible. Continuous,

long-term exposure to sunlight could cause
discolouration of the screen. Lesser exposure to
heat is good for battery life and display health.

WARNING

• Always use the kill switch if the side stand is

engaged.
• Do not sit on the scooter when parked on the side
stand.
• Do not move the scooter with the side stand
engaged.
• Always ensure the side stand is completely
opened up while parking.

On the road 30
3

CHARGE
IT UP
USING THE ATHER DOT

Pull the
connector out

PLUGGING IT IN

1 Turn the key to the ON position.

2 Gently pull down the connector from the holder,

open the charging port flap on the scooter and
plug it in.

3 Key should be in the OFF position for the scooter

to start charging automatically.

Charge it up 32
 2

Charge it up 33
UNPLUGGING IT

1Before you pull out the cable, turn the key to the
ON position to unlock the connector.

2 Keep the key in the ON position and wait for 5

seconds.

3 Remove the charging connector, and put it back

in the Ather DotTM holder. Remember to close the
charging port flap on the scooter.

You can check the charge status on the dashboard

while it’s charging. You can also check it on your
phone, by using Ather AppTM.

CAUTION

Do not leave the connector on the ground to avoid

damage through dust and water ingress.

Do not try to forcefully pull the connector out. Try

turning the key to OFF, back to ON and try again. It
should come out effortlessly.

Disclaimer: Remote charge status on the Ather AppTM is available only

with the Pro.

Charge it up 34
WHAT DOES THE LED SAY?

The charger tells you what it’s up to, with an LED

light that changes colours.

Solid amber light: Charger software is being

updated over the air.

Solid green light: When not connected to the

scooter, the charger is functional.
When connected to the scooter, charging is
complete.

Blinking green light: Charging in progress.

Solid red light: Fault in the charger. Please

contact customer support.

No light: No power.

NOTE

If you don’t see any light (when there is power in

your premises), press the Reset button on the PRCD
(Portable Residual Current Device). If it still doesn’t
respond, please contact customer support.

Using the Portable Charger plug in the 3-pin

connector of the charging cable into the 5A socket.

Charge it up 35
Plug in the other end of the cable to the scooter’s
charging port. Turn the key to OFF position and pull
it out. To plug out, keep the key in the ON position,
wait for 5 seconds, then remove the charging
connector and close the charging port flap.

CAUTION

Remove the key once your scooter is connected to

the charger or disconnected from the charging
cable. Do not turn the key ON and pull out the
connector at the same time. Hold on for 5 seconds
to pull the connector out. Do not remove the
connector while your scooter is charging. You run
the risk of damaging the connector and/or the
scooter.

Charge it up 36
4

SCOOTER
SHUTDOWN
VEHICLE SHUTDOWN

HIBERNATION

When the scooter is not in use (unplugged, with the

key turned OFF), the electronics consume
negligible power. The battery drains extremely
slowly. But, if you don’t ride for around 25 days, you
should charge for a few hours before you head out.

HOW TO SHUT DOWN

By heading to the settings section on the

dashboard.

CAUTION

Charge your scooter every 100 days. It’s a must,

even if the scooter is in Shutdown Mode. This
prevents permanent damage to the battery pack.

Scooter shutdown 38
5

CARING
FOR YOUR
SCOOTER
THINGS TO KEEP IN MIND

WHEN NOT IN USE

If you are not using your scooter for more than 5

days, leave it in Shutdown Mode to prevent
battery drain.

QUICK CLEAN-UP

Regularly cleaning the vents avoids the risk of

damage caused due to insufficient ventilation,
choking and insulation of the heat dissipation
components. Keep the motor and battery vents
spic and span.

EXTEND YOUR BATTERY LIFE

• Use of Optimised Charging feature is

recommended. It helps control battery ageing.
• Always use the original charger provided by Ather
to charge your vehicle. Avoid using 3rd party
chargers.
• Shut down (vacation mode) the vehicle when it
remains idle for a few days, to prevent accidental
battery draining.

Disclaimer: Optimised Charging available only with the Pro.

Caring for your scooter 40

PULLING AND PUSHING

Turn the motor OFF using the kill switch when pulling
the scooter back or pushing the scooter down
a slope.

CAUTION

Do not try to hold the scooter at a place using partial

acceleration, while on a slope. In all likelihood, it will
damage the motor.

Caring for your scooter 41

TROUBLESHOOTING

If you’re facing a technical issue, have any doubts or

queries, please call us up.

+91 7676 811 777

In case this number is unreachable, please check
for the updated number on atherenergy.com or the
Ather AppTM.

CAUTION

Do not attempt to service the scooter on your own

or at an unauthorised service centre. Sure, the
scooter belongs to you and you may do as you
please. But we know it inside out, and it’s not as
easy as it may seem. Let us take the lead and
service the scooter for you.

DISCLAIMER

Ather Energy Private Limited ("Ather") takes

reasonable care to ensure the accuracy of the
information contained herein, but it shall not be
responsible for any inadvertent errors or omissions
that may appear in this document. All trademarks

Caring for your scooter 42

are the property of their respective owners.

The use of Ather 450S electric scooter ("Ather

450S") shall be governed by the terms and
conditions of the agreement entered between you
and Ather during purchase ("Agreement"). Ather
makes no warranties of merchantability and/or
fitness for a particular purpose, in relation to the
accuracy, reliability or contents of this document.
You acknowledge that any usage of Ather 450S in
contravention with this document may render the
warranty void. Ather reserves the right to update
this document and/or discontinue Ather 450S at any
time without notice. Specifications/features are
subject to change without notice.

Caring for your scooter 43