Signal conditioners,

process indicators, and field devices

Transmit and visualize signals without interference
Transmit and visualize signals
without interference
In electrotechnical systems, electromagnetic or high-frequency disturbance variables
can adversely affect the transmission of often sensitive measured value signals.
Our signal conditioners, process indicators, and field devices ensure interference-free
signal transmission from the sensor level to the control level.

Web code: #0960

Highly compact signal conditioners

MINI Analog Pro offers the easiest installation
and startup in a confined space. With the
plug-in gateways, you can combine the
advantages of safe electrical isolation with
those of digital communication. Transmit up
to eight field signals to industrial networks
without any interference. This eliminates the
need for signal-specific input cards.

Field devices
Field devices enable you to record the
signals from resistance temperature
Find out more detectors, thermocouples, resistance-
with the web code type sensors, and voltage sensors
directly in the field and convert them
For detailed information, use the web codes provided in into standard signals. The products are
this brochure. Simply enter # and the four-digit number in the available for control cabinet installation
search field on our website. or installation in the field.

Web code: #1234 (example)

Or use the direct link:

phoenixcontact.net/webcode/#1234

2 PHOENIX CONTACT
 Contents
Highly compact signal conditioners
The new standard for with plug-in connection technology 4
the control cabinet.
More information is Signal conditioners with bus
available on pages 54 and network connection 6
to 55.
Signal conditioners with functional safety
and explosion protection 8

System cabling solutions for

signal conditioners 10

Signal conditioners with Process indicators and field devices 12

functional safety and
explosion protection Creative solutions for a smart world:
Analog meets digital 14
MACX Analog signal conditioners
provide you with comprehensive
Product overviews 16
solutions for safe, interference-free
analog and digital signal processing.
In addition to explosion protection Accessories 42
for all zones and material groups,
MACX Analog provides functional Technical information and
safety in accordance with application examples 48
SIL IEC/EN 61508 and
PL EN ISO 13849. Other products for measurement
and control technology 52

COMPLETE line – The comprehensive

solution for the control cabinet 54

Process indicators
The Field Analog process indicators
enable you to monitor and display
analog and temperature signals, and
to control them via digital and analog
inputs and outputs.

PHOENIX CONTACT 3
Highly compact signal conditioners
with plug-in connection technology
Easier than ever but slim as before: MINI Analog Pro is the first 6 mm signal
conditioner range with plug-in connection technology. Easily accessible terminal points
and current signal measurement during operation make your work easier than ever.

Web code: #0492

Rapid power bridging and

group error messaging
In addition to rapid power bridging, the
DIN rail connector also simplifies wiring,
system extension, and module replacement
during operation. Group error messaging
enables convenient diagnostics.

Push-in Technology
Designed by PHOENIX CONTACT

Your advantages
Easy installation, thanks to easily accessible terminal
points and plug-in connection terminal blocks
Measure current signals during operation, without
disconnecting current loops Service-friendly
Versatile configuration via DIP switch, software, Large-surface marking areas enable complete
or app loop identification using standard marking
material. All status and error indicators are
Service-friendly, thanks to large-surface marking areas always visible and provide you with an instant
and status LEDs overview on site.
Rapid power bridging and group error messaging with
the DIN rail connector

4 PHOENIX CONTACT
Easily accessible terminal points and Measure signals during operation, without
FASTCON Pro connection terminal blocks disconnecting the current loops

Smart configuration and

monitoring
Depending on the product type, you can
access the devices wirelessly: via NFC and
Bluetooth. Benefit from the comprehensive
functions of the MINI Analog Pro app and
configure the modules directly on site, or read
the current measured values during operation.

PHOENIX CONTACT 5
Signal conditioners with bus and
network connection
Safely isolated from the field through to the network: the plug-in MINI Analog Pro
gateways combine the advantages of safe electrical isolation with those of digital
communication. With an overall width of less than 50 mm, you can transmit
up to eight field signals in industrial networks without any interference, while also
eliminating the need for signal-specific input cards.

Web code: #1136

Modular and space saving

Full range of signals: the easy-to-attach
plug-in gateways enable you to integrate any
MINI Analog Pro signal conditioner with
current or digital output into your network
in a space-saving way.

Push-in Technology
Designed by PHOENIX CONTACT

Your advantages
Easy network integration of signal conditioners in
any combination by means of compact gateways
Interference-free signal transmission right through to
the CPU, thanks to safe electrical isolation
Cost and space savings, as signal-specific input cards
are no longer needed
Fast, error-free signal bundling in one network cable
Convenient configuration and monitoring via the
MINI Analog Pro app or via web interface

6 PHOENIX CONTACT
No need for input cards
Save space and costs: thanks to
the direct network connection,
you no longer need signal-specific Measure signals during operation, without Convenient configuration and monitoring
input cards and can benefit from disconnecting the current loops via the web server
consistent electrical isolation right
through to the CPU, including
between the individual channels.

Error-free wiring,
easy configuration
Bundle eight channels quickly and
without errors in just one network
cable. Configure module settings easily
via a rotary coding switch, software,
web interface, or app.

PHOENIX CONTACT 7
Signal conditioners with functional safety
and explosion protection
Reliable and safe: MACX Analog signal conditioners provide you with comprehensive
solutions for safe, interference-free analog and digital signal processing. In addition
to explosion protection for all zones and material groups, MACX Analog provides
functional safety in accordance with IEC/EN 61508 (SIL) and EN ISO 13849 (PL).

Web code: #1143

Rapid power bridging and

group error messaging
In addition to rapid power bridging without
wiring, the DIN rail connector also simplifies
system extension and module replacement
during operation. Group error messaging
enables convenient diagnostics.

Push-in Technology
Designed by PHOENIX CONTACT

Your advantages
Safe and reliable: international Ex approvals and
functional safety in accordance with SIL and PL
High signal quality, thanks to safe electrical isolation
and long service life, thanks to low self-heating
Overall width of just 12.5 mm for single- and
two-channel standard functions
Easy 24 V power bridging with group error messaging
or wide-range input up to 230 V AC/DC
Service-friendly connection technology: coded,
plug-in terminal blocks

8 PHOENIX CONTACT
High signal quality and long
service life
The transmission concept with safe electrical
isolation ensures precise, interference-free
signal transmission. Benefit from a long service
life and high operational safety over the entire
operating temperature range, thanks to low Connection terminal blocks with integrated test Savings of up to 30% with single- and two-channel
power consumption and self-heating. sockets and polarity reversal protection products (overall width of just 12.5 mm)

Convenient configuration and

monitoring
You can very easily configure the devices
without software via the DIP switches on
the front of the housing, or conveniently
from a PC: either using FDT/DTM software,
or alternatively the user-friendly stand-alone
Windows software with integrated
monitoring function.

PHOENIX CONTACT 9
System cabling solutions for
signal conditioners
Fast and error-free signal connection: our Termination Carriers and system adapters
are Plug and Play solutions for fast and error-free connection of a large number of
signals from the field to your automation system. By using standard DIN rail devices,
you only need one engineering design for standard DIN rail and system applications.

Web code: #1138

Optimum adaptation
The controller-side connection is established Space saving
via pre-assembled VARIOFACE system cables Thanks to the compact design and deep
with front adapters. A wide range of system system connections, space savings of
connectors and front adapters for I/O cards up to 30% can be achieved compared
of various automation systems, e.g., ABB, to market-standard solutions.
Emerson, Honeywell, Invensys, Siemens,
and Yokogawa, are available for optimum
adaptation to your system. Contact us for
more information.

Your advantages
Fast, error-free connection of a large number of
signals using a consistent system cabling solution
Significant space savings, thanks to compact module
carriers that can be aligned directly next to each
other
High failsafe performance: stable aluminum profile
with passive PCB without active components
Just one engineering design for standard DIN rails
and system applications
Easy wiring, thanks to plug-in, coded cable sets and
pre-assembled system cables

10 PHOENIX CONTACT
 MINI Analog Pro system adapter
Simply snap on and you’re done:
the system adapter allows you to
connect eight MINI Analog Pro signal
conditioners in any combination to
your controller.

High availability
The stable, vibration-proof aluminum carrier
has a profile for accommodating standard
DIN rail devices. The termination PCB is also
mechanically decoupled and only has passive
components.

PHOENIX CONTACT 11
Process indicators and field devices
Record, control, and monitor: the Field Analog process indicators enable you to
monitor and display analog and temperature signals, and to control them via digital
and analog inputs and outputs. Field devices record and convert the signals from
resistance temperature detectors, thermocouples, resistance-type sensors,
and voltage sensors directly on site.

Web code: # 1140

Record and convert in the field
Field devices enable you to record the signals
from resistance temperature detectors,
thermocouples, resistance-type sensors, and
voltage sensors directly in the field and con-
vert them into standard signals. The products
are available for control cabinet installation
or installation in the field.

Push-in Technology
Designed by PHOENIX CONTACT

Your advantages
Easy configuration of process indicators via front
keypad or FDT/DTM software
Everything at a glance: display values as well as bar
graphs or measuring point designations, additional
color change in the event of an error
Digital transfer, display, and remote configuration of
process data via integrated HART communication
International use, thanks to UL and CSA approvals
Also for intrinsically safe circuits in the Ex area:
versions with ATEX, CSA, and FM approval

12 PHOENIX CONTACT
 Universal use
Field Analog process indicators are available
Everything at a glance for field and control panel installation. The
universal inputs allow you to record current,
Current process values are easy to read on
voltage, RTDs, and TCs. Comprehensive
the five-digit backlit displays. The bar graph
approvals also allow you to connect sensors
also provides you with a quick overview.
in the Ex area.
Alarm states can be identified easily from a
distance by their changing color.

PHOENIX CONTACT 13
Creative solutions for a smart world:
Analog meets digital
Phoenix Contact will support you on your journey to a smarter world with a versatile
range of innovative products, software, services, and expertise tailored to your
applications. Digitalization is the way forward if it creates added value. Find out here
how we have already incorporated trends in digitalization into our products.

14 PHOENIX CONTACT
Your custom product Your factory calibration certificate Smart information, configuration,
Simply order the appropriate product Factory calibration certificates for the and monitoring
with your custom configuration using the preconfigured products you order are These are just a few of the areas where our
order key in the catalog or our user-guided available on request. The test data is already signal conditioners and measuring transducers
web configurator. You will then receive determined during the production process provide support as soon as you start working
modules that are preconfigured to your and supplied directly with the product. This with them. With the MINI Analog Pro app,
specifications – even in a minimum quantity saves you having to deal with an external we present you with a comprehensive tool
of one unit. test laboratory. The certificates are available that allows you to handle these tasks pre-
with or without test data. Simply select the cisely. Furthermore, you can download the
appropriate option for the factory calibration full product documentation and test your
certificate via the web configurator on our required configurations in advance.
homepage.

Quality from a single source – Made by Phoenix Contact

It is only when you keep sight of every little
detail that you can be sure the quality is
right. This is why we develop and produce
everything ourselves for our signal condi-
tioners. We produce high-quality “Made
in Germany” signal conditioners at our
own plastic, metal, and SMD production
facilities. Another advantage for you: short
delivery times, even for large quantities.

From the field to the cloud

The plug-in MINI Analog Pro gateways enable
you to digitalize the measured values of up to
eight signal conditioners in any combination.
Set the course for the future today and, for
example, connect new and existing systems
to the Internet of Things using the Cloud
IoT Gateway, without interfering with the
automation logic.

PHOENIX CONTACT 15
Highly compact signal conditioners with plug-in connection technology

Analog IN/OUT Web code: #0492

U,I
U,I IN I I OUT IN U U OUT IN U I OUT
IN OUT IN U,I U,I OUT IN U U,I OUT

FM FM FM FM
FM FM POWER
POWER POWER POWER POWER POWER

MINI Analog Pro

MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2-U- MINI MCR-2-
Designation
UNI-UI-UIRO(-PT) UI-UI(-PT) U-UI(-PT) I-I(-PT) U(PT) U-I0(-PT)

Universal 4-way signal 3-way signal 3-way signal 3-way signal

3-way signal 3-way signal
conditioner with conditioner, conditioner, conditioner,
conditioner, conditioner,
contact, configurable, with fixed signal with fixed signal with fixed signal
configurable configurable
with switch contact combinations combinations combinations

NFC NFC NFC NFC NFC NFC

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2902028*) 2902026*) 2902040*) 2902037*) 2902021*) 2902019*) 2901999 2901998 2902043 2902042 2902023 2902022

Ex Ex n Ex n Ex n Ex n Ex n Ex n
0 … 20 mA,
4 … 20 mA,
-20 … 20 mA,
0 … 5 V, 1 … 5 V, Unipolar and bipolar
0 … 24 mA
-5 … 5 V, 0 … 10 V, (28 ranges each): 0 … 20 mA, 0 … 10 V,
(freely adjustable),
IN 2 … 10 V, -10 … 10 V, 0 ... 50 mV to 4 … 20 mA; -10 … 10 V; 0 … 10 V
0 … 12 V
0 … 20 V, 4 … 20 V, 0 ... 30 V IN = OUT IN = OUT
(freely adjustable)
-20 … 20 V, ±50 mV to ±30 V
0 … 24 V, 4.8 … 24 V,
-24 … 24 V, 0 … 30 V,
6 … 30 V, -30 … 30 V

Analog:
0 … 20 mA, 0 ... 20 mA
0 … 21 mA
4 … 20 mA, 4 ... 20 mA
(freely adjustable),
0 … 5 V, 0 ... 10 V
0 … 10.5 V (freely 0 … 20 mA, 0 … 10 V,
1 … 5 V, 2 ... 10 V
OUT adjustable) 4 … 20 mA; -10 … 10 V; 0 … 20 mA
-5 … 5 V, 0 ... 5 V
IN = OUT IN = OUT
0 … 10 V, 1 ... 5 V
Digital:
2 … 10 V, -5 ... 5 V
1 N/O transistor
-10 … 10 V -10 ... 10 V
output

Configuration:
• • •
DIP switch
Configuration:
•
software / app
Fault signaling:
•
LED
Fault monitoring:
OC / SC / OV / •
UN / DE
Fault monitoring:
• • • • •
DE
Termination
• • • • • •
Carrier (optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error
Module information: DIP switch setting help:
NFC • Access module information NFC • Access module information
• DIP switch setting help

16 PHOENIX CONTACT
Highly compact signal conditioners with plug-in connection technology

Analog IN/OUT Web code: #0492

OUT1

U, I
IN U I OUT IN I U IN I U OUT POWER OUT
OUT I I IN U, I U, I OUT2
IN
FM FM FM FM FM
POWER POWER POWER POWER POWER

MINI Analog Pro

MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2-
Designation
U-I4(-PT) I0-U(-PT) I4-U(-PT) RPSS-I-I(-PT) UNI-UI-2UI(-PT)

3-way signal conditioner, 3-way signal conditioner, 3-way signal conditioner, 3-way repeater
Universal 4-way signal
with fixed signal with fixed signal with fixed signal power supply, with fixed
duplicator, configurable
combinations combinations combinations signal combinations

NFC NFC NFC NFC NFC

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2902030 2902029 2902001 2902000 2902003 2902002 2902015 2902014 2905028*) 2905026*)

Ex Ex n Ex n Ex n Ex n Ex n

Isolator operation:
0 … 20 mA,
4 … 20 mA;
0 … 24 mA
IN = OUT
(freely adjustable),
IN 0 … 10 V 0 … 20 mA 4 … 20 mA
0 … 12 V
Repeater power supply
(freely adjustable)
operation:
4 … 20 mA;
IN = OUT

2 x 0 … 21 mA
0 … 20 mA,
(freely adjustable),
OUT 4 … 20 mA 0 … 10 V 0 … 10 V 4 … 20 mA;
2 x 0 … 10.5 V
IN = OUT
(freely adjustable)

Configuration:
•
DIP switch
Configuration:
•
software / app
Fault signaling:
•
LED
Fault monitoring:
OC / SC / OV / •
UN / DE
Fault monitoring:
• • • •
DE
Termination Carrier
• • • • •
(optional)

Configuration The module can be snapped onto the DIN rail connector for
NFC • Access module information 24 V voltage bridging
• DIP switch setting help T-Connector
Compatible

• Module configuration
• Bluetooth communication Wide-range input for worldwide power supply networks
Universal
Power Input

PHOENIX CONTACT 17
Highly compact signal conditioners with plug-in connection technology

Analog IN/OUT Web code: #0492

OUT1

I IN IN OUT
I I OUT I I I
POWER IN POWER POWER POWER POWER POWER
I I OUT2 I I OUT
IN POWER
IN IN OUT IN OUT
FM I I OUT I I I
POWER POWER POWER POWER

MINI Analog Pro

MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2-
Designation
RPSS-I-2I(-PT) I-I-ILP(-PT) 2I-2I-ILP(-PT) RPS-I-I-OLP(-PT) RPS-2I-2I-OLP(-PT)

Input loop-powered Input loop-powered Output loop-powered Output loop-powered

4-way supply duplicator,
2-way isolator, 2-way isolator, 2-way isolator, 2-way isolator,
HART-transparent
1-channel 2-channel 1-channel 2-channel

NFC NFC NFC NFC NFC

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2905629 2905628 2901995 2901994 2901997 2901996 2906447 2906446 2906449 2906448

Ex Ex n Ex n Ex n Ex n Ex n

Isolator operation:
0 … 20 mA,
4 … 20 mA;
IN = OUT 0 … 20 mA, 2 x 0 … 20 mA, 0 … 20 mA, 2 x 0 … 20 mA,
IN 4 … 20 mA; 2 x 4 … 20 mA; 4 … 20 mA; 2 x 4 … 20 mA;
Repeater power supply IN = OUT IN = OUT IN = OUT IN = OUT
operation:
4 … 20 mA;
IN = OUT

2 x 0 … 20 mA, 0 … 20 mA, 2 x 0 … 20 mA, 0 … 20 mA, 2 x 0 … 20 mA,

OUT 2 x 4 … 20 mA; 4 … 20 mA; 2 x 4 … 20 mA; 4 … 20 mA; 2 x 4 … 20 mA;
IN = OUT IN = OUT IN = OUT IN = OUT IN = OUT

Configuration:
•
DIP switch
Configuration:
software / app
Fault signaling:
LED
Fault monitoring:
OC / SC / OV / UN / DE
Fault monitoring:
•
DE
Termination Carrier
• • • • •
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error
Module information: DIP switch setting help:
NFC • Access module information NFC • Access module information
• DIP switch setting help

18 PHOENIX CONTACT
Highly compact signal conditioners with plug-in connection technology

Analog IN/OUT Temperature Frequency Web code: #0492

U,I f
POWER f
IN U,I I IN U,I OUT IN U,I OUT IN OUT IN U, I OUT
OUT
FM FM FM FM
POWER POWER POWER POWER

MINI Analog Pro

MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2-
Designation
UI-I-OLP(-PT) RTD-UI(-PT) TC-UI(-PT) F-UI(-PT) UI-FRO(-PT)

Universal measuring
Universal measuring Frequency transducer / Analog frequency
Output loop-powered transducer for
transducer for TCs, limit value switch, transducer / limit value
2-way isolator 2-, 3-, 4-conductor RTDs,
configurable configurable switch, configurable
configurable

NFC NFC NFC NFC NFC

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw
*) *) *) *) *) *) *)
Order No. 2902063 2902061 2902052 2902049 2905249 2902055 2902058 2902056 2902032 2902031*)

Ex Ex n Ex n Ex n Ex n Ex n
IEC 751: Pt 100, Pt 200,
Pt 500, Pt 1000; GOST
6651-2009: Pt 100, NAMUR proximity
Pt 1000, Cu50, Cu100, IEC 584-1: B, C, E, J, K, sensors, floating switch
Cu53; N, R, S, T; DIN 43710: contacts, NPN / PNP
Unipolar and bipolar:
JIS C1604-1997: Pt100, L, U; transistor contacts, 0 … 24 mA
0 … 2 mA to 0 … 40 mA
Pt1000; GOST 8.585: A-1, A-2, frequency generators, (freely adjustable),
IN (16 ranges),
DIN 43760: Ni 100, A-3, M, L; HTL encoders, 0 … 12 V
0 … 50 mV to 0 … 30 V
Ni 1000; -250°C … +2,500°C PWM signals (freely adjustable)
(58 ranges)
-200°C … +850°C (depending on the Frequency input:
(depending on the sensor) 0.002 Hz … 200 kHz
sensor); PWM input: 2 … 98%
Linear resistance:
0 … 4 kΩ

Frequency:
Analog: 0 … 10 kHz
0 … 21 mA 0 … 21 mA 0 … 21 mA (freely adjustable);
(freely adjustable), (freely adjustable), (freely adjustable), PWM output: 0 … 100%;
OUT 4 … 20 mA 0 … 10.5 V 0 … 10.5 V 0 … 10.5 V Digital:
(freely adjustable) (freely adjustable) (freely adjustable) 1 N/O transistor output,
Digital: F / PWM output,
1 N/O transistor output can also be used as a
second switch output

Configuration:
• • • • •
DIP switch
Configuration:
• • • •
software / app
Fault signaling:
• • • •
LED
Fault monitoring:
• • • •
OC / SC / OV / UN / DE
Fault monitoring:
DE
Termination Carrier
• • • • •
(optional)

Configuration The module can be snapped onto the DIN rail connector for
NFC • Access module information 24 V voltage bridging
• DIP switch setting help T-Connector
Compatible

• Module configuration
• Bluetooth communication Wide-range input for worldwide power supply networks
Universal
Power Input

PHOENIX CONTACT 19
Highly compact signal conditioners with plug-in connection technology

Potentiometers Digital IN Limit values Web code: #0492

IN R U,I OUT IN OUT IN U,I OUT IN OUT IN OUT

FM FM FM FM FM
POWER POWER POWER POWER POWER

MINI Analog Pro

MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2-
Designation
POT-UI(-PT) NAM-2RO(-PT) UI-REL(-PT) T-REL(-PT) T-2RO(-PT)

Universal limit Universal limit

Potentiometer NAMUR signal value switch for value switch for
Limit value switch,
measuring transducer, conditioner, 2-, 3-, 4-conductor 2-, 3-, 4-conductor
configurable
configurable configurable RTDs and TCs, RTDs and TCs,
configurable configurable

NFC NFC NFC NFC NFC

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw
*) *) *) *)
Order No. 2902017 2902016 2902005 2902004 2902035 2902033 2905633 2905632 2906877 2906876

Ex Ex n Ex n Ex n Ex n Ex n

IEC 751: Pt100, Pt200, Pt500, Pt1000; GOST 6651-

2009: Pt100, Pt1000, Cu50, Cu100, Cu53;
NAMUR JIS C1604-1997: Pt100, Pt1000;
0 … 24 mA
3-wire potentiometer: proximity sensors, DIN 43760: Ni100, Ni1000
(freely adjustable),
IN 100 Ω … 100 kΩ, floating switch contacts, -200°C … +850°C (depending on the sensor)
0 … 12 V
automatic detection switch contacts with Linear resistance: 0 … 4 kΩ;
(freely adjustable)
resistance circuit IEC 584-1: B, E, J, K, N, R, S, T; DIN 43710: L, U;
GOST 8.585: A-1, A-2, A-3, M, L;
-250°C … +2,500°C (depending on the sensor)

2 N/O transistor
0 … 21 mA
outputs, 1 output,
(freely adjustable), 2 N/O transistor
OUT can be used either for 1 PDT relay 1 N/O relay
0 … 10.5 V outputs
signal duplication or
(freely adjustable)
error messaging

Configuration:
• • • • •
DIP switch
Configuration:
• • • •
software / app
Fault signaling:
• • • • •
LED
Fault monitoring:
• • • • •
OC / SC / OV / UN / DE
Fault monitoring:
DE
Termination Carrier
• • • •
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error
Module information: DIP switch setting help:
NFC • Access module information NFC • Access module information
• DIP switch setting help

20 PHOENIX CONTACT
Highly compact signal conditioners with plug-in connection technology

Accessories Web code: #0492

POWER
OUT UCV
POWER UCV MONI- POWER
IN POWER POWER
IN ICC OUT IN TORING POWER IN OUT
IN PTB IN 1:1 OUT
OUT FM
FM
FM FM
POWER POWER

IN
MINI Analog Pro OUT

MINI MCR-2- MINI MCR-2- MINI MCR-2- MINI MCR-2-

Designation MINI MCR-2-TB
CVCS(-PT) PTB(-PT) FM-RC(-PT) SPS-24-15(-PT)

Feed-through
Constant voltage / Fault monitoring Constant voltage source,
Feed-in terminal terminal block,
current source module sensor power supply
1:1 connection

NFC NFC NFC NFC

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2902065 2902064 2902067 2902066 2904508 2904504 - 2902068 1033201 1033202

Ex Ex n Ex n Ex n Ex n Ex n

Constant voltage /
current source for
potentiometers, Constant voltage source
measuring bridges, For redundant feed-in on for potentiometers,
encoders, etc. the DIN rail connector Fault monitoring module measuring bridges,
for evaluation and group encoders, etc.
Input: 9.6 … 30 V DC Inputs: 9.9 … 30 V DC error messaging in the Feed-through terminal
fault monitoring system block for 1:1 forwarding Sensor power supply
Description Output: 10 V / 8.75 V / Output: max. 3.2 A; of signals that are already for 2- or 3-conductor
7.5 V / 6.25 V / 5 V / 9.6 … 29.7 V DC Monitoring of the electrically isolated in the sensors
3.75 V / 2.5 V / 1.25 V / supply voltages of the MINI Analog Pro group
20 mA / 17.5 mA / Monitoring of the supply MINI MCR-2-PTB(-PT) Input: 9.6 … 30 V DC
15 mA / 12.5 mA / possible in combination feed-in terminals
10 mA / 7.5 mA / 5 mA / with fault monitoring Output: 15 V /
2.5 mA max. 30 mA

Can be set via DIP switch

Configuration:
• •
DIP switch
Configuration:
software / app
Fault signaling:
• • •
LED
Fault monitoring:
OC / SC / OV / UN / DE
Fault monitoring:
•
DE
Termination Carrier
• • •
(optional)

Configuration The module can be snapped onto the DIN rail connector for
NFC • Access module information 24 V voltage bridging
• DIP switch setting help T-Connector
Compatible

• Module configuration
• Bluetooth communication Wide-range input for worldwide power supply networks
Universal
Power Input

PHOENIX CONTACT 21
Signal conditioners with functional safety and explosion protection

Analog IN / OUT Web code: #1143

POWER
IN U,I U,I OUT IN U,I U,I OUT I I OUT
IN

POWER POWER POWER

MACX Analog

MACX MCR- MACX MCR- MACX MCR-SL- MACX MCR-EX-SL-

Designation
UI-UI(-SP)-NC UI-UI-UP(-SP)-NC RPSSI-I(-SP) RPSSI-I(-SP)

Universal 3-way Ex i repeater power supply

Universal 3-way Repeater power supply
signal conditioner, and input signal conditioner,
signal conditioner, and input signal conditioner,
configurable, HART-transparent,
configurable HART-transparent
wide-range supply input [Ex ia]

T-Connector Universal T-Connector T-Connector

Compatible Power Input Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

*) *) *) *)
Order No. 2811556 2811446 2811569 2811297 2924207 2865955 2924016 2865340

Ex Ex n Ex n Ex n Ex n, Ex i

SIL SIL 2 SIL 2 SIL 2

PL - - -

Overall width in mm 12.5 12.5 12.5

Unipolar: Unipolar:
0 … 50 mV to 0 … 100 V, 0 … 50 mV to 0 … 100 V,
Input isolator operation:
0 … 1 mA to 0 … 100 mA 0 … 1 mA to 0 … 100 mA
4 … 20 mA, (0 … 20 mA);
Bipolar: Bipolar:
Repeater power supply operation:
IN -50 … 50 mV to -100 … 100 V, -50 … 50 mV to -100 … 100 V,
4 … 20 mA;
-1 … 1 mA to -100 … 100 mA -1 … 1 mA to -100 … 100 mA
Transmitter supply voltage:
Live zero: Live zero:
>16 V (20 mA)
1 … 5 mA, 2 … 10 mA, 1 … 5 mA, 2 … 10 mA,
4 … 20 mA, 1 … 5 V, 2 … 10 V 4 … 20 mA, 1 … 5 V, 2 … 10 V

Unipolar: Unipolar:
0 … 50 mV to 0 … 10 V, 0 … 50 mV to 0 … 10 V,
0 … 1 mA to 0 … 20 mA 0 … 1 mA to 0 … 20 mA
0 … 20 mA,
Bipolar: Bipolar: 4 … 20 mA
OUT -50 … 50 mV to -10 … 10 V, -50 … 50 mV to -10 … 10 V, (functionally safe)
-1 … 1 mA to -20 … 20 mA -1 … 1 mA to -20 … 20 mA IN = OUT
Load ≤1,000 Ω (20 mA)
Live zero: Live zero:
1 … 5 mA, 2 … 10 mA, 1 … 5 mA, 2 … 10 mA,
4 … 20 mA, 1 … 5 V, 2 … 10 V 4 … 20 mA, 1 … 5 V, 2 … 10 V
Configuration:
• •
DIP switch
Configuration:
software
HART-transparent •
Fault signaling:
LED
Fault monitoring:
• • •
OC / SC
Termination Carrier
• •
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

22 PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Analog IN / OUT Web code: #1143

POWER
I I OUT
IN
POWER I I OUT
IN

POWER

MACX Analog

MACX MCR-SL- MACX MCR-EX-SL- MACX MCR-EX-SL- MACX MCR-SL- MACX MCR-EX-SL-
Designation
RPSSI-2I(-SP) RPSSI-2I(-SP) RPSSI-2I-1S(-SP) RPSS-2I-2I(-SP) RPSS-2I-2I(-SP)

Ex i repeater Ex i repeater power

Repeater Ex i repeater
power supply and supply and input signal
power supply and Repeater power supply, power supply,
input signal conditioner conditioner with two
input signal conditioner two-channel, HART- two-channel,
with two outputs, outputs, only one channel
with two outputs, transparent HART-transparent,
HART-transparent, HART-transparent,
HART-transparent input [Ex ia]
input [Ex ia] input [Ex ia]

T-Connector T-Connector T-Connector T-Connector T-Connector

Compatible Compatible Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2924838 2924825 2924236 2865366 2908856 2908855 2904090 2904089 2924676 2865382

Ex Ex n Ex n, Ex i Ex n, Ex i Ex n Ex n, Ex i

SIL SIL 2 SIL 2 SIL 3

PL PL d PL d PL d

Overall width in mm 12.5 12.5 12.5

Input isolator operation:

4 … 20 mA (0 … 20 mA)
Repeater power supply operation:
2 x 4 … 20 mA
Repeater power supply operation:
IN
4 … 20 mA
Transmitter supply voltage:
>16 V (20 mA) per channel
Transmitter supply voltage:
>16 V (20 mA)

2 x 0 … 20 mA, 2 x 0 … 20 mA, 2 x 4 … 20 mA
2 x 4 … 20 mA 2 x 4 … 20 mA (functionally safe)
OUT (functionally safe) (functionally safe) IN = OUT
IN = OUT IN = OUT Load: ≤450 Ω (20 mA)
Load ≤450 Ω (20 mA) Load ≤450 Ω (20 mA)

Configuration:
DIP switch
Configuration:
software
HART-transparent • • •
Fault signaling:
LED
Fault monitoring:
• • •
OC / SC
Termination Carrier
• • •
(optional)

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input

PHOENIX CONTACT 23
Signal conditioners with functional safety and explosion protection

Analog IN / OUT Web code: #1143

IN
I I OUT
POWER IN POWER
I I OUT I I OUT
IN POWER
IN
I I OUT
POWER POWER

MACX Analog

MACX MCR-SL- MACX MCR-EX-SL- MACX MCR-SL- MACX MCR-SL-

Designation
RPSSI-I-UP(-SP) RPSSI-I-UP(-SP) I-I-ILP(-SP) 2I-2I-ILP(-SP)

Repeater power supply

Repeater power supply
and input signal conditioner, Input loop-powered Input loop-powered
and input signal conditioner,
HART-transparent, 2-way isolator, 2-way isolator,
HART-transparent,
wide-range supply, single-channel two-channel
wide-range supply
input [Ex ia]

Universal Universal T-Connector T-Connector

Power Input Power Input Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2924210 2865968 2924029 2865793 2905279 2905278 2905281 2905280

Ex Ex n Ex n, Ex i Ex n Ex n

SIL SIL 2 SIL 3 SIL 3

PL - - -

Overall width in mm 17.5 12.5 12.5

Input isolator operation:

4 … 20 mA (0 … 20 mA)
0 … 20 mA, 2 x 0 … 20 mA,
Repeater power supply operation:
IN 4 … 20 mA; 2 x 4 … 20 mA;
4 … 20 mA
IN = OUT IN = OUT
Transmitter supply voltage:
>16 V (20 mA)

4 … 20 mA (functionally safe) (0 … 20 mA) active / passive, 0 … 20 mA, 2 x 0 … 20 mA,

1 … 5 V (0 … 5 V); 4 … 20 mA 2 x 4 … 20 mA
OUT
IN = OUT (functionally safe) (functionally safe)
Load ≤600 Ω (20 mA) IN = OUT IN = OUT

Configuration:
DIP switch
Configuration:
software

HART-transparent •

Fault signaling:
LED
Fault monitoring:
•
OC / SC
Termination Carrier
• •
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

24 PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Analog IN / OUT Web code: #1143

IN
I I OUT
IN POWER I I
OUT I I
I I OUT IN OUT IN
POWER
IN
I I OUT
POWER POWER POWER

MACX Analog

MACX MCR-SL- MACX MCR-SL- MACX MCR-SL- MACX MCR-EX-SL-

Designation
I-I-HV-ILP(-SP) 2I-2I-HV-ILP(-SP) IDSI-I(-SP) IDSI-I(-SP)

Input loop-powered Input loop-powered Ex i output signal conditioner,

Output signal conditioner,
2-way isolator, single-channel, 2-way isolator, two-channel, HART-transparent,
HART-transparent
5 kV test voltage 5 kV test voltage output [Ex ia]

T-Connector T-Connector T-Connector T-Connector

Compatible Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2907705 2907704 2907707 2907706 2924223 2865971 2924032 2865405

Ex Ex n Ex n Ex n Ex n, Ex i

SIL SIL 3 SIL 3 SIL 2

PL - - -

Overall width in mm 12.5 12.5 12.5

0 … 20 mA, 2 x 0 … 20 mA, 4 … 20 mA (0 … 20 mA);

IN 4 … 20 mA; 2 x 4 … 20 mA; IN = OUT
IN = OUT IN = OUT With line fault detection

0 … 20 mA, 2 x 0 … 20 mA,
4 … 20 mA (functionally safe) (0 … 20 mA);
4 … 20 mA 2 x 4 … 20 mA
OUT IN = OUT
(functionally safe) (functionally safe)
With line fault detection
IN = OUT IN = OUT

Configuration:
DIP switch
Configuration:
software

HART-transparent •

Fault signaling:
LED
Fault monitoring:
•
OC / SC
Termination Carrier
• • •
(optional)

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input

PHOENIX CONTACT 25
Signal conditioners with functional safety and explosion protection

Temperature Web code: #1143

U,I U,I U,I

IN OUT IN OUT IN OUT

3x 3x
POWER POWER POWER

MACX Analog

MACX MCR- MACX MCR-EX- MACX MCR- MACX MCR-EX-

Designation
T-UI-UP(-SP) T-UI-UP(-SP) T-UIREL-UP(-SP) T-UIREL-UP-SP

Universal Ex i Universal
Universal Universal
temperature transducer, temperature transducer,
temperature transducer, temperature transducer,
with limit value relay, with three limit value relays,
with limit value relay, with three limit value relays,
wide-range supply, configurable, wide-range supply, configurable,
wide-range supply, configurable wide-range supply, configurable
input [Ex ia] input [Ex ia]

Universal Universal Universal Universal

Power Input Power Input Power Input Power Input

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

*) *) *) *) *) *) *)
Order No. 2811860 2811394 2924689 2865654 2811828 2811378 2924799 2865751*)

Ex Ex n Ex n, Ex i Ex n Ex n, Ex i

SIL SIL 2 SIL 2

PL PL d PL d

Overall width in mm 17.5 35

RTD: Pt10 … Pt10000, RTD: Pt10 … Pt10000,

Ni10 … Ni10000, Cu10, Cu53, KTY Ni10 … Ni10000, Cu10, Cu53, KTY
TC 1): type B, E, J, K, N, R, S, T, L, U, C, TC 1): type B, E, J, K, N, R, S, T, L, U, C,
D, A-1, A-2, A-3, M, L D, A-1, A-2, A-3, M, L
IN
Potentiometer: 0 … 50 kΩ Potentiometer: 0 … 50 kΩ

Linear resistance: 0 … 50 kΩ Linear resistance: 0 … 50 kΩ

±1,000 mV, ±20 mA ±1,000 mV, ±20 mA

Analog:
Analog:
0 … 20 mA, -10 … 10 V (freely scalable),
0 … 20 mA, -10 … 10 V (freely scalable),
4 … 20 mA (functionally safe)
4 … 20 mA (functionally safe)
OUT
Digital:
Digital:
3 PDT relays, combination of
1 PDT relay
relay 2 and 3 functionally safe

Configuration:
• •
DIP switch
Configuration:
• •
software

HART-transparent

Fault signaling:
• •
LED
Fault monitoring:
• •
OC / SC
Termination Carrier
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

26 PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Temperature Web code: #1143

MACX Analog

MACX MCR- MACX MCR-EX- MACX MCR- MACX MCR-EX-

Designation
RTD-I(-SP) RTD-I(-SP) TC-I TC-I

Ex i temperature transducer Ex i temperature transducer

Temperature transducer Temperature transducer
for RTD sensors, configurable, for TC sensors, configurable,
for RTD sensors, configurable for TC sensors, configurable
input [Ex ia] input [Ex ia]

T-Connector T-Connector T-Connector T-Connector

Compatible Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

*) *) *) *) *)
Order No. 1050201 1050192 1050252 1050222 1050228 1050233*)

Ex Ex n Ex n, Ex i Ex n Ex n, Ex i

SIL SIL 2 SIL 2

PL - -

Overall width in mm 12.5 12.5

RTD: Pt10 … Pt10000,

Ni10 … Ni10000, Cu10, Cu53, KTY TC: type B, E, J, K, N, R, S, T, L, U, C, D,
A-1, A-2, A-3, M, L
IN
Potentiometer: 0 … 50 kΩ
Voltage input: ±15 mV … ±1,000 mV
Linear resistance: 0 … 50 kΩ

OUT 4 ... 20 mA (functionally safe) 4 ... 20 mA (functionally safe)

Configuration:
DIP switch
Configuration:
• •
software

HART-transparent

Fault signaling:
• •
LED
Fault monitoring:
• •
OC / SC
Termination Carrier
• •
(optional)

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input

PHOENIX CONTACT 27
Signal conditioners with functional safety and explosion protection

Potentiometers Web code: #1143 Limit values

U,I U,I U,I U,I

IN OUT IN OUT IN OUT IN OUT

3x 3x
POWER POWER POWER POWER

MACX Analog

MACX MCR- MACX MCR-EX- MACX MCR- MACX MCR-EX- MACX MCR-
Designation
T-UI-UP(-SP) T-UI-UP(-SP) T-UIREL-UP(-SP) T-UIREL-UP(-SP) T-UI-UP(-SP)

Universal Universal Ex i Universal Universal Universal

temperature transducer, temperature transducer, temperature transducer, temperature transducer, temperature transducer,
with limit value relay, with limit value relay, with three limit value with three limit value with limit value relay,
wide-range supply, wide-range supply, relays, wide-range supply, relays, wide-range supply, wide-range supply,
configurable configurable, input [Ex ia] configurable configurable, input [Ex ia] configurable

Universal Universal Universal Universal Universal

Power Input Power Input Power Input Power Input Power Input

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw
Order No. 2811860*) 2811394*) 2924689*) 2865654*) 2811828*) 2811378*) 2924799*) 2865751*) 2811860*) 2811394*)
Ex Ex n Ex n, Ex i Ex n Ex n, Ex i Ex n
SIL SIL 2 SIL 2 SIL 2
PL PL d PL d PL d
Width [mm] 17.5 35 17.5
RTD: Pt10 … Pt10000,
Ni10 … Ni10000, Cu10,
RTD: Pt10 … Pt10000, RTD: Pt10 … Pt10000, Cu53, KTY
Ni10 … Ni10000, Cu10, Cu53, KTY Ni10 … Ni10000, Cu10, Cu53, KTY TC 1): type B, E, J, K, N,
TC 1): type B, E, J, K, N, R, S, T, L, U, C, TC 1): type B, E, J, K, N, R, S, T, L, U, C, R, S, T, L, U, C,
D, A-1, A-2, A-3, M, L D, A-1, A-2, A-3, M, L D, A-1, A-2, A-3, M, L
IN
Potentiometer: 0 … 50 kΩ Potentiometer: 0 … 50 kΩ Potentiometer:
0 … 50 kΩ
Linear resistance: 0 … 50 kΩ Linear resistance: 0 … 50 kΩ
±1,000 mV, ±20 mA ±1,000 mV, ±20 mA Linear resistance:
0 … 50 kΩ
±1,000 mV, ±20 mA

Analog:
Analog:
Analog: 0 … 20 mA, -10 … 10 V
0 … 20 mA, -10 … 10 V (freely scalable),
0 … 20 mA, -10 … 10 V (freely scalable), (freely scalable),
4 … 20 mA (functionally safe)
4 … 20 mA (functionally safe) 4 … 20 mA
OUT
(functionally safe)
Digital:
Digital:
3 PDT relays, combination of
1 PDT relay Digital:
relay 2 and 3 functionally safe
1 PDT relay

Configuration:
• • •
DIP switch
Configuration:
• • •
software
HART-transparent
Fault signaling:
• • •
LED
Fault monitoring:
• • •
OC / SC
Termination
Carrier (optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

28 PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Limit values Web code: #1143

U,I U,I
IN U,I OUT
IN OUT IN OUT IN U,I OUT

3x 3x FM
POWER POWER POWER POWER

MACX Analog

MACX MCR-EX- MACX MCR- MACX MCR-EX- MACX MCR-SL-UI- MACX MCR-EX-SL-
Designation
T-UI-UP(-SP) T-UIREL-UP(-SP) T-UIREL-UP(-SP) REL(-SP) UI-REL-(-SP)

Universal Ex i Universal Universal

temperature transducer, temperature transducer, temperature transducer,
Limit value switch, Ex i limit value switch,
with limit value relay, with three limit value with three limit value
configurable configurable, input [Ex ia]
wide-range supply, relays, wide-range supply, relays, wide-range supply,
configurable, input [Ex ia] configurable configurable, input [Ex ia]

Universal Universal Universal T-Connector T-Connector

Power Input Power Input Power Input Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw Push-in Screw
Order No. 2924689*) 2865654*) 2811828*) 2811378*) 2924799*) 2865751*) 2906170 2906169 2906165 2906164
Ex Ex n, Ex i Ex n Ex n, Ex i Ex n Ex n, Ex i
SIL SIL 2 SIL 2 SIL 2 (SC 3)
PL PL d PL d PL c
Width [mm] 17.5 35.0 12.5
RTD: Pt10 … Pt10000,
Ni10 … Ni10000, Cu10,
Cu53, KTY RTD: Pt10 … Pt10000,
TC 1): type B, E, J, K, N, Ni10 … Ni10000, Cu10, Cu53, KTY
R, S, T, L, U, C, TC 1): type B, E, J, K, N, R, S, T, L, U, C,
D, A-1, A-2, A-3, M, L D, A-1, A-2, A-3, M, L
0.2 … 20 mA,
IN
0.1 … 10 V
Potentiometer: Potentiometer: 0 … 50 kΩ
0 … 50 kΩ
Linear resistance: 0 … 50 kΩ
Linear resistance: ±1,000 mV, ±20 mA
0 … 50 kΩ
±1,000 mV, ±20 mA

Analog:
Analog:
0 … 20 mA, -10 … 10 V
0 … 20 mA, -10 … 10 V (freely scalable),
(freely scalable),
4 … 20 mA (functionally safe)
4 … 20 mA
OUT 1 PDT relay
(functionally safe)
Digital:
3 PDT relays, combination of
Digital:
relay 2 and 3 functionally safe
1 PDT relay

Configuration:
• • •
DIP switch
Configuration:
• •
software
HART-transparent
Fault signaling:
• • •
LED
Fault monitoring:
• • •
OC / SC
Termination
•
Carrier (optional)

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input
PHOENIX CONTACT 29
Signal conditioners with functional safety and explosion protection

Digital IN Web code: #1143

OUT1

IN OUT2

POWER

MACX Analog

MACX MCR-SL- MACX MCR-EX-SL- MACX MCR-SL- MACX MCR-EX-SL-

Designation
NAM-R(-SP) NAM-R(-SP) NAM-2RO(-SP) NAM-2RO(-SP)

Ex i NAMUR Ex i NAMUR
NAMUR NAMUR
signal conditioner, signal conditioner,
signal conditioner, signal conditioner,
PDT output, 2 N/O outputs,
PDT output 2 N/O outputs
input [Ex ia] input [Ex ia]

T-Connector T-Connector T-Connector T-Connector

Compatible Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2924252 2865997 2924045 2865434 2924265 2865010 2924061 2865450

Ex Ex n Ex n, Ex i Ex n Ex n, Ex i

SIL SIL 2 SIL 2

PL

Overall width in mm 12.5 12.5

NAMUR proximity sensors NAMUR proximity sensors

Unconnected contacts or contacts with resistance circuit Unconnected contacts or contacts with resistance circuit
IN
Line fault detection can be switched on / off Line fault detection can be switched on / off
Direction of action can be selected Direction of action can be selected

2 N/O relays
250 V AC (2 A), 120 V DC (0.2 A),
1 PDT relay
30 V DC (2 A)
OUT 250 V AC (2 A), 120 V DC (0.2 A),
30 V DC (2 A)
Signal output 2 can be configured as a duplicator or
an error message output

Configuration:
• •
DIP switch
Configuration:
software

HART-transparent

Fault signaling:
• •
LED
Fault monitoring:
• •
OC / SC
Termination Carrier
• •
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

30 PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Digital IN Web code: #1143

IN1 OUT1 IN1 OUT1

IN2 IN2
OUT2 OUT2

POWER POWER

MACX Analog

MACX MCR-SL- MACX MCR-EX-SL- MACX MCR-SL- MACX MCR-EX-SL-

Designation
2NAM-RO(-SP) 2NAM-RO(-SP) 2NAM-R-UP(-SP) 2NAM-R-UP(-SP)

Ex i NAMUR
Ex i NAMUR NAMUR
NAMUR signal conditioner,
signal conditioner, signal conditioner,
signal conditioner, two-channel, PDT output,
two-channel, N/O output, two-channel, PDT output,
two-channel, N/O output wide-range supply,
input [Ex ia] wide-range supply
input [Ex ia]

T-Connector T-Connector Universal Universal

Compatible Compatible Power Input Power Input

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2924294 2865049 2924087 2865476 2924304 2865052 2924249 2865984

Ex Ex n Ex n, Ex i Ex n Ex n, Ex i

SIL SIL 2 SIL 2

PL

Overall width in mm 12.5 17.5

NAMUR proximity sensors NAMUR proximity sensors

Unconnected contacts or contacts with resistance circuit Unconnected contacts or contacts with resistance circuit
IN
Line fault detection can be switched on / off Line fault detection can be switched on / off
Direction of action can be selected Direction of action can be selected

1 N/O relay per channel 1 PDT relay per channel

OUT 250 V AC (2 A), 120 V DC (0.2 A), 250 V AC (2 A), 120 V DC (0.2 A),
30 V DC (2 A) 30 V DC (2 A)

Configuration:
• •
DIP switch
Configuration:
software

HART-transparent

Fault signaling:
• •
LED
Fault monitoring:
• •
OC / SC
Termination Carrier
•
(optional)

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal

31
Power Input
PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Digital IN Web code: #1143

IN1 OUT1 IN1 OUT1

IN2 IN2
OUT2 OUT2

POWER POWER

MACX Analog

MACX MCR-SL- MACX MCR-EX-SL- MACX MCR-SL- MACX MCR-EX-SL-

Designation
NAM-2T(-SP) NAM-2T(-SP) 2NAMT(-SP) 2NAM-T(-SP)

Ex i NAMUR
Ex i NAMUR NAMUR
NAMUR signal conditioner,
signal conditioner, signal conditioner,
signal conditioner, two-channel,
two transistor outputs, two-channel,
two transistor outputs transistor output,
input [Ex ia] transistor output
input [Ex ia]

T-Connector T-Connector T-Connector T-Connector

Compatible Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2924278 2865023 2924249 2865984 2924281 2865036 2924090 2865489

Ex Ex n Ex n, Ex i Ex n Ex n, Ex i

SIL SIL 2 SIL 2

PL

Overall width in mm 12.5 12.5

NAMUR proximity sensors NAMUR proximity sensors

Unconnected contacts or contacts with resistance circuit Unconnected contacts or contacts with resistance circuit
IN
Line fault detection can be switched on / off Line fault detection can be switched on / off
Direction of action can be selected Direction of action can be selected

2 transistor outputs, passive

1 transistor output per channel, passive
Switching voltage / current: max. 30 V DC / 50 mA
OUT Switching voltage / current: max. 30 V DC / 50 mA
Switching frequency: max. 5 kHz
Switching frequency: max. 5 kHz
Signal output 2 can also be configured as an error message output

Configuration:
• •
DIP switch
Configuration:
software

HART-transparent

Fault signaling:
• •
LED
Fault monitoring:
• •
OC / SC
Termination Carrier
• •
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

32 PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Digital IN Web code: #1143

MACX Analog

Designation MACX MCR-EX-SL-NAM-NAM(-SP) MACX MCR-EX-SL-NAM-YO(-SP) MACX MCR-EX-SL-NAM-HO(-SP)

NAMUR signal conditioner, NAMUR signal conditioner,

NAMUR signal conditioner,
output with resistive behavior, output with resistive behavior,
output with resistive behavior,
Yokogawa-compatible, Honeywell-compatible,
with line fault transparency,
with line fault transparency, with line fault transparency,
input [Ex ia]
input [Ex ia] input [Ex ia]

T-Connector T-Connector T-Connector

Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw

Order No. 2924090 2865489 2905724 2905723 2907405 2907404

Ex Ex n, Ex i Ex n, Ex i Ex n, Ex i

SIL SIL 2 SIL 2 SIL 2

PL

Overall width in mm 12.5 12.5 12.5

NAMUR proximity sensors NAMUR proximity sensors NAMUR proximity sensors

Unconnected contacts or contacts Unconnected contacts or contacts Unconnected contacts or contacts
IN with resistance circuit with resistance circuit with resistance circuit
Line fault detection can be switched on / off Line fault detection can be switched on / off Line fault detection can be switched on / off
Direction of action can be selected Direction of action can be selected Direction of action can be selected

Resistive behavior compatible

Resistive behavior in accordance with 7C-RUSLS-3224
Resistive behavior, voltage drop,
with EN 60947-5-6 Switching frequency: max. 5 kHz
OUT 1 signal: 6.5 V
Switching voltage: 8.2 V DC
Switching frequency: max. 5 kHz
Switching frequency: max. 5 kHz Impedance 0 signal: 15 kΩ
Impedance 1 signal: 5 kΩ

Configuration:
• • •
DIP switch
Configuration:
software

HART-transparent

Fault signaling:
• • •
LED
Fault monitoring:
• • •
OC / SC
Termination Carrier
• • •
(optional)

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input
PHOENIX CONTACT 33
Signal conditioners with functional safety and explosion protection

Digital OUT Web code: #1143

- - - -

+ + + +
- - - -
OUT IN OUT IN OUT IN OUT IN
+ + + +

POWER POWER POWER

MACX Analog

MACX MCR-EX-SL- MACX MCR-EX-SL- MACX MCR-EX-SL- MACX MCR-EX-SL-

Designation
SD-21-25-LFD-SP SD-24-48-LFD-SP SD-23-48-LFD-SP SD-21-25-LP-SP

Solenoid driver, Solenoid driver, Solenoid driver,

Solenoid driver,
with logic input and with logic input and with logic input and
loop-powered,
line fault detection, line fault detection, line fault detection,
current limitation at 25 mA,
current limitation at 25 mA, current limitation at 48 mA, current limitation at 48 mA,
output [Ex ia]
output [Ex ia] output [Ex ia] output [Ex ia]

T-Connector T-Connector T-Connector T-Connector

Compatible Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2905674 2905669 2905674 2905669 2924870 2924867 2924113 2865492

Ex Ex n, Ex i Ex n, Ex i Ex n, Ex i Ex n, Ex i

SIL SIL 3 SIL 3 SIL 3 SIL 3

PL

Overall width in mm 12.5 12.5 12.5 12.5

Switching level 0 signal (L): Switching level 0 signal (L): Switching level 0 signal (L):
0 … 5 V DC 0 … 5 V DC 0 … 5 V DC
20 … 30 V DC,
IN
(45 mA at Ue = 24 V DC)
Switching level 1 signal (H): Switching level 1 signal (H): Switching level 1 signal (H):
15 … 30 V DC 15 … 30 V DC 15 … 30 V DC

4.64 V DC (at 25.1 mA) 9.7 V DC (at 48 mA) 9.5 V DC (at 48 mA)
Current limitation: 25.1 mA Current limitation: 48 mA Current limitation: 48 mA
5.5 V DC (at 25 mA)
Off-load voltage: 21.1 V DC Off-load voltage: 24.3 V DC Off-load voltage: 23 V DC
Current limitation: 25 mA
OUT Internal resistance: 641 Ω Internal resistance: 697 Ω Internal resistance: 269 Ω
Off-load voltage: 21.9 V DC
With line fault transparency With line fault transparency With line fault transparency
Internal resistance: 641 Ω
and additional error message and additional error message and additional error message
output output output

Configuration:
• • •
DIP switch
Configuration:
software

HART-transparent

Fault signaling:
• • • •
LED
Fault monitoring:
• • •
OC / SC
Termination Carrier
• • • •
(optional)

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

34 PHOENIX CONTACT
Signal conditioners with functional safety and explosion protection

Digital OUT Web code: #1143

- - -

+ + +
- - -
OUT IN OUT IN OUT IN
+ + +

MACX Analog

MACX MCR-EX-SL- MACX MCR-EX-SL- MACX MCR-EX-SL-

Designation
SD-21-40-LP-SP SD-24-48-LP-SP SD-21-60-LP-SP

Solenoid driver, Solenoid driver, Solenoid driver,

loop-powered, loop-powered, loop-powered,
current limitation at 40 mA, current limitation at 48 mA, current limitation at 58 mA,
output [Ex ia] output [Ex ia] output [Ex ia]

T-Connector T-Connector T-Connector

Compatible Compatible Compatible

Connection Push-in Screw Push-in Screw Push-in Screw

Order No. 2924139 2865764 2924126 2865609 2924126 2865609

Ex Ex n, Ex i Ex n, Ex i Ex n, Ex i

SIL SIL 3 SIL 3 SIL 3

PL

Overall width in mm 12.5 12.5 12.5

20 … 30 V DC, 20 … 30 V DC, 20 … 30 V DC,

IN
(65 mA at Ue = 24 V DC) (75 mA at Ue = 24 V DC) (95 mA at Ue = 24 V DC)

10 V DC (at 40 mA) 10.5 V DC (at 48 mA) 12.9 V DC (at 58 mA)

Current limitation: 40 mA Current limitation: 48 mA Current limitation: 58 mA
OUT
Off-load voltage: 21.9 V DC Off-load voltage: 24 V DC Off-load voltage: 21.9 V DC
Internal resistance: 287 Ω Internal resistance: 276 Ω Internal resistance: 133 Ω

Configuration:
DIP switch
Configuration:
software

HART-transparent

Fault signaling:
• • •
LED
Fault monitoring:
OC / SC
Termination Carrier
• • •
(optional)

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal

35
Power Input
PHOENIX CONTACT
Process indicators and field devices

Multifunctional process indicators Web code: #1140

POWER U,I U,I POWER U,I U,I PO WE R U, I U, I POWER U,I U,I

OUT OUT OUT OUT

IN IN IN IN
2x 2x 2x 2x
POWER POWER PO WE R POWER

Field Analog

FA MCR-EX-D-TUI-UI-2REL- FA MCR-FD-TUI-UI-2REL- FA MCR-EX-FD-TUI-UI-

Designation FA MCR-D-TUI-UI-2REL-UP
UP UP 2REL-UP

Multifunctional process Multifunctional Ex i process

Multifunctional process Multifunctional Ex i process
indicator in control panel indicator in control panel
indicator in field housing, indicator in field housing,
component housing, component housing,
wide-range supply, wide-range supply,
wide-range supply, wide-range supply,
W x H x D: 199 x 160 x 96 mm W x H x D: 199 x 160 x 96 mm
W x H x D: 96 x 48 x 151.8 mm W x H x D: 96 x 48 x 175 mm

Universal Universal Universal Universal

Power Input Power Input Power Input Power Input

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2907064 2907216 2907780 2907781

Ex Ex i Ex i

SIL

Current input:
0 … 20 mA, 0 … 5 mA, 4 … 20 mA

Repeater power supply operation:

>16 V, 22 mA
IN
Voltage input:
-30 ... 30 V, -10 ... 10 V, -1 ... 1 V, -100 ... 100 mV, 0 ... 1 V, 0 ... 5 V, 0 ... 10 V, 1 ... 5 V, 2 ... 10 V

RTD: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu50, Cu100

TC: type B … E, J, K, N, S, T, L, U

Analog:
0 … 20 mA, 4 … 20 mA,
0 … 10 V, 2 … 10 V, 0 … 5 V, 1 … 5 V

Digital:
OUT
2 PDT relays
1 transistor output, active

Display: 7-segment LCD, backlit

with dot matrix for text / bar graph

Configuration:
• • • •
keypad
Configuration:
• • • •
software / app
Configuration:
HART

DIN rail mounting With accessories With accessories

Field installation • •

Control panel
• •
installation

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

36 PHOENIX CONTACT
Process indicators and field devices

LED indicators Web code: #1140

POWER POWER POWER POWER

I I
IN I I I I
IN I I
IN IN
OUT OUT OUT OUT
0000 0000 0000 0000

Field Analog

Designation FA MCR-DS-I-I-OLP FA MCR-EX-DS-I-I-OLP FA MCR-FDS-I-I-OLP FA MCR-EX-FDS-I-I-OLP

Output loop-powered Output loop-powered Ex i

Output loop-powered Output loop-powered Ex i
process indicator process indicator
process indicator in field housing, process indicator in field housing,
in control panel housing, in control panel housing,
HART-compatible (master), HART-compatible (master),
HART-compatible (master), HART-compatible (master),
W x H x D: 133 x 81.5 x 55.5 mm W x H x D: 133 x 81.5 x 55.5 mm
W x H x D: 96 x 48 x 41.5 mm W x H x D: 96 x 48 x 41.5 mm

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2908781 2908800 2908782 2908801

Ex Ex i Ex i

SIL

4 … 20 mA,
IN
20 … 4 mA

Analog:
4 … 20 mA,
20 … 4 mA
OUT
Display:
5-digit measured value indicator with dimensions, bar graph, and backlight

Configuration:
• • • •
keypad
Configuration:
software / app
Configuration:
HART

DIN rail mounting With accessories With accessories

Field installation • •

Control panel
• •
installation

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input

PHOENIX CONTACT 37
Process indicators and field devices

LED indicators Web code: #1140

0000 Uref
00000 IN f 0000
IN U,I Iref OUT
OUT

POWER POWER
POWER

Field Analog

Designation MCR-SL-D-U-I MCR-SL-D-FIT MCR-SL-D-SPA-UI

Process indicator for measuring Process indicator for measuring and Digital setpoint adjuster for
and displaying standard signals, displaying frequencies, pulses, and times, defining current and voltage signals,
W x H x D: 48 x 24 x 68 mm W x H x D: 48 x 24 x 68 mm W x H x D: 48 x 24 x 68 mm

Special functions

Connection Push-in Screw Push-in Screw Push-in Screw

Order No. 2864011 2864024 2710314

Ex

SIL

Current input:
4-digit 7-segment display, LED
0 … 20 mA,
Dynamic counter input
4 … 20 mA
IN Automatic setpoint definition with
Dynamic set / reset input hold function and 20 interpolation points,
Voltage input:
manual setpoint definition via direct input
0 … 10 V, 2 … 10 V

6-digit 7-segment display, LED

5-digit 7-segment display, LED
Optocoupler output:
0 … 24 mA,
OUT active when indicator value <=0
Minimum / maximum value storage 0 … 12 V
This means that the device can be used
as a simple forward counter
in subtractive counting mode.

Configuration:
• • •
keypad
Configuration:
software / app
Configuration:
HART

DIN rail mounting With accessories With accessories With accessories

Field installation

Control panel
• • •
installation

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

38 PHOENIX CONTACT
Process indicators and field devices

Head-mounted transducers / 2-conductor field devices Web code: #1140

IN IN

POWER POWER POWER POWER

IN IN I
IN IN
I OUT I OUT I OUT OUT

Field Analog

FA MCR-EX-HT-TS-I-OLP-
Designation FA MCR-HT-TS-I-OLP-PT MCR-FL-HT-TS-LP-I-EX MCR-FL-HT-T-I
PT

Output loop-powered Ex i
Output loop-powered Output loop-powered Ex i Output loop-powered
head-mounted temperature
head-mounted temperature head-mounted temperature head-mounted temperature
transducer for RTDs, TCs,
transducer for RTDs, TCs, transducer for RTDs, TCs, transducer for RTDs, TCs,
resistance-type sensors,
resistance-type sensors, resistance-type sensors, resistance-type sensors,
and voltage sensors,
and voltage sensors and voltage sensors and voltage sensors
HART-compatible

Special functions

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2908742 2908743 2864545 2864529

Ex Ex n Ex i Ex i

SIL SIL 2 SIL 2 SIL 2

RTD: RTD:
RTD: RTD:
Pt100, Pt500, Pt1000, Ni100, Pt100, Pt500, Pt1000, Ni100,
Pt, Ni, Cu, OIML / GOST, Pt, Ni, Cu, OIML / GOST,
Ni500, Ni1000, Cu50, Cu100 Ni500, Ni1000, Cu50, Cu100
Cu50 OIML / GOST Cu50 OIML / GOST
TC: TC:
TC: TC:
type B … E, J, K, N, S, T, L, U type B … E, J, K, N, S, T, L, U
type A…E, J,K,N,R,S,T,L,U type A…E, J,K,N,R,S,T,L,U
IN
Resistance range: Resistance range:
Resistance range: Resistance range:
10 ... 400 Ω / 10 ... 2000 Ω 10 ... 400 Ω / 10 ... 2000 Ω
10 ... 2000 Ω 10 ... 2000 Ω
(minimum measuring span: (minimum measuring span:
(minimum measuring span: 10 Ω) (minimum measuring span: 10 Ω)
10 Ω / 100 Ω) 10 Ω / 100 Ω)
Voltage input: -20 ... 100 mV Voltage input: -10 ... 100 mV
Voltage input: -10 ... 100 mV Voltage input: -20 ... 75 mV

4 … 20 mA, 4 … 20 mA, 4 … 20 mA, 4 … 20 mA,

OUT
20 … 4 mA 20 … 4 mA 20 … 4 mA 20 … 4 mA

Configuration:
keypad
Configuration:
• • • •
software / app
Configuration:
• • •
HART

DIN rail mounting With accessories With accessories With accessories With accessories

Field installation • • • •

Control panel
installation

The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input
PHOENIX CONTACT 39
Process indicators and field devices

Head-mounted transducers / 2-conductor field devices Web code: #1140

IN IN

POWER POWER POWER POWER

IN IN
IN IN
I OUT I OUT
I OUT I OUT

Field Analog

MACX MCR-EX-TS-I-OLP
Designation MCR-FL-HT-T-I-EX MCR-SL-HT-PT100-I MACX MCR-TS-I-OLP(-SP)
(-SP)

Output loop-powered
Output loop-powered Output loop-powered Output loop-powered
Ex i head-mounted temperature
head-mounted temperature temperature transducer Ex i temperature transducer
transducer for RTDs, TCs,
transducer for Pt100 resistance for RTDs, TCs; for RTDs, TCs;
resistance-type sensors,
temperature detector HART-compatible HART-compatible
and voltage sensors

Special functions

Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2864532 2864516 2908664 2908662*) 2908661 2908660*)

Ex Ex i Ex n Ex i

SIL

RTD: RTD: RTD:

Pt100, Pt500, Pt1000, Ni100, Pt, Ni, Cu, OIML / GOST, Cu50 Pt, Ni, Cu, OIML / GOST, Cu50
Ni500, Ni1000, Cu50, Cu100 OIML / GOST OIML / GOST

TC: TC: TC:

RTD:
type B … E, J, K, N, S, T, L, U type A…E, J,K,N,R,S,T,L,U type A…E, J,K,N,R,S,T,L,U
IN Pt100
(minimum measuring span: 10 K)
Resistance range: Resistance range: Resistance range:
10 ... 2000 Ω 10 ... 400 Ω / 10 ... 2000 Ω 10 ... 400 Ω / 10 ... 2000 Ω
(minimum measuring span: 10 Ω) (minimum measuring span: 10 Ω) (minimum measuring span: 10 Ω)

Voltage input: -20 ... 75 mV Voltage input: -20 ... 100 mV Voltage input: -20 ... 100 mV

4 … 20 mA, 4 … 20 mA, 4 … 20 mA, 4 … 20 mA,

OUT
20 … 4 mA 20 … 4 mA 20 … 4 mA 20 … 4 mA

Configuration:
keypad
Configuration:
• • • •
software / app
Configuration:
• •
HART

DIN rail mounting With accessories With accessories • •

Field installation • •

Control panel
installation

*) Versions can also be ordered configured ex works. OC = open circuit, SC = short circuit, OV = over-range, UN = under-range, DE = device error

40 PHOENIX CONTACT
Field Analog process indicators and field devices

Head-mounted transducers / 2-conductor field devices Web code: #1140

POWER POWER IN POWER IN POWER

IN IN I
I OUT I OUT OUT I OUT

Field Analog

Designation MCR-FL-TS-LP-I-EX MCR-SL-PT100-LP-I MCR-FL-T-LP-I MCR-FL-T-LP-I-EX

Output loop-powered
Ex i temperature transducer Output loop-powered Output loop-powered Output loop-powered
for RTDs, TCs, temperature transducer temperature transducer for Ex i temperature transducer
resistance-type sensors, for Pt100 resistance RTDs, TCs, resistance-type for RTDs, TCs, resistance-type
and voltage sensors, temperature detectors sensors, and voltage sensors sensors, and voltage sensors
HART-compatible

Logos for wide range,

DIN rail connector
Connection Push-in Screw Push-in Screw Push-in Screw Push-in Screw

Order No. 2864587 2864558 2864561 2864574

Ex Ex i Ex i

SIL SIL 2

RTD: RTD:
Pt100, Pt500, Pt1000, Ni100, Pt100, Pt500, Pt1000, Ni100,
Ni500, Ni1000, Cu50, Cu100 Ni500, Ni1000, Cu50, Cu100
RTD:
TC: TC:
Pt100, Pt500, Pt1000, Ni100,
RTD: type B … E, J, K, N, R, S, T, L, U type B … E, J, K, N, R, S, T, L, U
Ni500, Ni1000, Cu50, Cu100
IN Pt100 (minimum measuring
span: 10 K) Resistance range: Resistance range:
TC:
10 ... 400 Ω / 10 ... 2000 Ω 10 ... 400 Ω / 10 ... 2000 Ω
type B … E, J, K, N, S, T, L, U
(minimum measuring span: (minimum measuring span:
10 Ω / 100 Ω) 10 Ω / 100 Ω)

Voltage input: -10 ... 100 mV Voltage input: -10 ... 100 mV

4 … 20 mA, 4 … 20 mA, 4 … 20 mA, 4 … 20 mA,

OUT
20 … 4 mA 20 … 4 mA 20 … 4 mA 20 … 4 mA

Configuration:
•
keypad
Configuration:
• • • •
software / app
Configuration:
•
HART

DIN rail mounting • • • •

Field installation

Control panel
installation
The module can be snapped onto the DIN rail connector for
24 V voltage bridging
T-Connector
Compatible

Wide-range input for worldwide power supply networks

Universal
Power Input
PHOENIX CONTACT 41
Product overview – Gateways for bus and network connection

Modbus/RTU gateway Modbus/TCP gateway PROFIBUS gateway

MINI MCR-2-V8-MOD-RTU MINI MCR-2-V8-MOD-TCP MINI MCR-2-V8-PB-DP
Order No.: 2905634 Order No.: 2905635 Order No.: 2905636

Gateway for integrating any eight Gateway for integrating any eight Gateway for integrating any eight
MINI Analog Pro signal conditioners MINI Analog Pro signal conditioners MINI Analog Pro signal conditioners
with current or digital output into with current or digital output into with current or digital output into
a Modbus/RTU network a Modbus/RTU network a PROFIBUS DP network

Accessories for the MINI Analog Pro highly compact signal conditioners

DIN rail connectors Power supply Programming adapters

ME 6,2 TBUS-2 1,5/5-ST-3,81 GY MINI-SYS-PS-100-240AC/24DC/1.5 IFS-USB-PROG-ADAPTER
Order No.: 2695439 Order No.: 2866983 Order No.: 2811271
Gray, for two MINI Analog Pro modules each USB programming adapter for programming
MINI-PS-100-240AC/24DC/1.5/EX via PC
ME 17,5 TBUS 1,5/5-ST-3,81 GN Order No.: 2866653 (Ex-n-capable)
Order No.: 2709561 IFS-BT-PROG-ADAPTER
Green, for MINI-SYS system power supply • Wide-range input: Order No.: 2905872
(2 required) 85 ... 264 V AC (45 - 65 Hz) Programming adapter for wireless
• Output voltage: communication via Bluetooth
24 V DC ±1%
• Output current: TWN4 MIFARE NFC USB ADAPTER
1.5 A at 60°C / 2 A at 40°C Order No.: 2909681
NFC programming adapter with
USB interface, for the wireless configuration
of NFC-capable products

42 PHOENIX CONTACT
Accessories for the MINI Analog Pro highly compact signal conditioners

Marking labels Adhesive labels Connector set

UCT-EM (30x5) Order No.: 0801505 SK 5,0 WH:REEL FASTCON PRO-SET
UCT-EM (30x5) CUS Order No.: 0801589 Order No.: 0805221 Order No.: 2906227
UCT-EM (30x5) YE Order No.: 0830340 • Self-adhesive marker strips, unmarked, Set, consisting of four plugs with screw
UC-EMLP (15x5) Order No.: 0819301 continuous connection
UC-EMLP (15x5) CUS • Material off the roll for marking with
Order No.: 0824550 THERMOMARK ROLL thermal transfer FASTCON PRO-SET-PT
• For snapping in or attaching to module printer Order No.: 2906228
cover Set, consisting of four plugs with Push-in
• Can be marked with THERMOMARK CARD connection
or BLUEMARK printer
• Lettering field size: 30 x 5 mm/15 x 5 mm

System cabling System cabling Setpoint adjuster

MINI MCR-2-V8-FLK 16 TC-D37SUB-ADIO16-MP-P-UNI EMG 30-SP-4K7LIN
Order No.: 2901993 Order No.: 2906639 Order No.: 2940252
System adapter for fast and error-free Termination Carrier, universal, Individual setpoint definition,
connection of any eight MINI Analog Pro for 16 MINI Analog Pro signal conditioners resistance value 4.7 kΩ
signal conditioners to a controller EMG 30-SP-10K LIN
TC-D37SUB-AIO16-MP-PS-UNI Order No.: 2942124
Order No.: 2906640 Individual setpoint definition,
Termination Carrier, universal, resistance value 10 kΩ
for 16 MINI Analog Pro signal conditioners, EMG 30-SPK-10K LIN
with HART multiplexer connection Order No.: 2942137
With preset set points,
resistance value 10 kΩ

PHOENIX CONTACT 43
Accessories for the MACX Analog signal conditioners

Programming adapters DIN rail connectors Marking material

IFS-USB-PROG-ADAPTER ME 6,2 TBUS-2 1,5/5-ST-3,81 GY UC-EMLP (11X9) (white)
Order No.: 2811271 Order No.: 2695439 Order No.: 0819291
For programming multifunctional devices Self-adhesive plastic labels for
with the ANALOG-CONF software or ME 6,2 TBUS-2 1,5/5-ST-3,81 GN equipment marking: UniCard, 10-section,
via FDT/DTM Order No.: 2869728 lettering field size: 11 x 9 mm
For direct supply via any MACX Analog device
IFS-BT-PROG-ADAPTER or for supply via a feed-in and fault signaling UC-EMLP (11X9) CUS (white)
Order No.: 2905872 module of the same shape Order No.: 0824547
Programming adapter for wireless As above, plus marked according to
communication via Bluetooth your specifications
For details, visit phoneixcontact.com

Test plugs Function plugs Multiplexer for HART signals

MPS-MT Order No.: 0201744 MACX MCR-CJC Order No.: 2924993 MACX MCR-S-MUX
MPS-IH BK (black) Order No.: 0201731 MACX MCR-EX-CJC Order No.: 2925002 Order No.: 2865599
MPS-IH GY (gray) Order No.: 0201728 Plug for cold junction compensation Multiplexer for the digital connection of
MPS-IH GN (green) Order No.: 0201702 for thermocouples, in combination with HART-compatible field devices to a PC or
MPS-IH YE (yellow) Order No.: 0201692 MACX…-(EX)-T-UI… temperature management system, 32-channel, including
MPS-IH BU (blue) Order No.: 0201689 transducers two 14-wire flat-ribbon cables
MPS-IH RD (red) Order No.: 0201676
MPS-IH WH (white) Order No.: 0201663 MACX MCR-I20 Order No.: 2905680 MACX MCR-S-MUX-TB
Test plug for 2.3 mm Ø socket hole, MACX MCR-EX-I20 Order No.: 2905679 Order No.: 2308124
consisting of MPS-MT metal part and Connection terminal block for current signals Transfer board for connecting HART field
MPS-IH… color insulating sleeve (±20 mA) for safe switching of limit values, devices to the HART multiplexer
in combination with MACX…-(EX)-T-UI…
temperature transducers

44 PHOENIX CONTACT
Accessories for the MACX Analog signal conditioners

Shield fast connection Resistance circuit Termination Carriers

SSA 3-6 (for Ø 3 - 6 mm) UKK 5-2R/NAMUR Order No.: 2941662 TC-D37SUB-ADIO16-EX-P-UNI
Order No.: 2839295 D-UKK 3/5 (gray) Order No.: 2770024 Order No.: 2924854
D-UKK 3/5 BU (blue) Order No.: 2770105 Universal, for 16 single-channel
SSA 5-10 (Ø 5 - 10 mm) Double-level terminal block with resistance MACX signal conditioners
Order No.: 2839512 circuit in accordance with NAMUR for line
For connecting cable shielding to cable fault detection with mechanical contacts. TC-D37SUB-AIO16-EX-PS-UNI
terminal points, can be connected to Important: for intrinsically safe circuits, Order No.: 2902932
PLUGTRAB PT only in combination with D-UKK 3/5… cover Universal, for 16 single-channel
MACX signal conditioners,
with HART multiplexer connection

TC-2D37SUB-ADIO32-2EX-P-UNI
Order No.: 2904684
Universal, for 16 two-channel
MACX signal conditioners

Feed-in and fault signaling module Dummy module with

MACX MCR-PTB no electrical function
Order No.: 2865625 MACX MCR-EX-DUMMY-
With screw connection ISOLATOR
Order No.: 2904970
MACX MCR-PTB-SP With screw
Order No.: 2924184
With Push-in connection MACX MCR-EX-DUMMY-
ISOLATOR-SP
TC-MACX-MCR-PTB Order No.: 2905846
Order No.: 2904673 With Push-in connection
Only for use on the Termination Carrier,
with screw connection

PHOENIX CONTACT 45
Accessories for the Field Analog process indicators and field devices

Programming adapters DIN rail adapters DIN rail adapters for

MCR-PAC-T-USB FA MCR-SL-D-RM head-mounted transducers
Order No.: 2309000 Order No.: 1032996 MCR-DIN-RAIL-ADAPTER HT
Software adapter cable, length: 2.4 m, DIN rail adapter for FA MCR-... digital Order No.: 2864671
for programming MCR-...-LP-... and indicators with 96 x 48 mm housing DIN rail adapter for head-mounted
MCR-...-HT-... modules dimensions, suitable for 35 mm DIN rails transducers, suitable for 35 mm DIN rails
in accordance with EN 60715 in accordance with EN 60715
GW HART USB MODEM
Order No.: 1032996 MCR-SL-D-RA
HART USB modem for configuring Order No.: 2810081
MACX MCR(-EX)-TS-I-OLP-... and DIN rail adapter for LED indicators
FA MCR(-EX)-HT-TS-I-OLP-... via the with 24 x 48 mm housing dimensions,
HART protocol suitable for 35 mm DIN rails in accordance
with EN 60715

Wall and tube mounting sets Display for head transmitter Electronics housings
FA MCR-FD-PM FA MCR-HT-D FA MCR-HT-FH
Order No.: 2908739 Order No.: 2908735 Order No.: 2908736
Wall and tube mounting set for Display unit for plugging into FA MCR-... Field housing for the installation of head
FA MCR-FD-TUI-UI-2REL-UP and head transmitters, enables process values transmitters with or without display unit,
FA MCR-EX-FD-TUI-UI-2REL-UP to be read directly, can be configured for direct connection to the process
process indicators separately via DIP switch
FA MCR-HT-FH-WM
FA MCR-FDS-PM Order No.: 2908737
Order No.: 2908783 Wall fastening for FA MCR-HT-FH field
Wall and tube mounting set for housing
FA MCR(-EX)-FDS-I-I-OLP process indicator
in field housing

46 PHOENIX CONTACT
Power supply and diagnostics

Flexible feed-in
2. 1. 2. 1.
The DIN rail connector gives you three
device supply options:

1. Direct feed-in on the module

• Without additional accessories
• For up to 16*) MINI Analog Pro 2. 2.
modules
• For up to 32*) MACX modules
2. Feed-in via a feed-in module of the
same shape
• Also allows redundant feed-in and
supply monitoring
• For up to 115*) MINI Analog Pro
modules
• For up to 80*) MACX modules
3. Feed-in via the system power supply
• Also allows redundant feed-in and
supply monitoring
• For up to 60*) MINI Analog Pro
modules
• For up to 10*) MACX modules
Note: not suitable for Ex i modules 3. 3.

Convenient diagnostics with

fault monitoring
With fault monitoring group error
messaging, the DIN rail connector
offers a modular solution for fast error
evaluation in multi-channel applications.
The MINI Analog Pro and MACX systems
are compatible with one another. The
following faults are indicated depending
on the module type:

• Open circuit
• Short circuit
• Supply failure
• Over-range or under-range
(MINI Analog Pro only)
• Fuse fault on the feed-in module
(MACX Analog only)

*) The exact number depends on the current consumption of the module type in question. Notes on calculation can be found in our feed-in manual
in the download area for the product.

PHOENIX CONTACT 47
Isolate, convert, filter, amplify – Application examples

Flow monitoring and signaling using

a 4-way signal conditioner Passive
The freely adjustable 4-way signal condi-
tioner with switching output enables you Flow meter 7 ... 9 V 4 ... 20 mA
to set the parameters for your application
according to your specific requirements.
The transistor output is available as a DO
threshold switch. You can configure eight
different switching behaviors
+ 24 V DC

Flow monitoring using a 3-way signal

conditioner
The 3-way signal conditioners with fixed Passive
values represent a price-optimized alterna-
tive in multi-channel standard applications. Flow meter 0 ... 10 V 4 ... 20 mA

U I

+ 24 V DC

Level monitoring using a repeater

power supply
The repeater power supply supplies the
Level gauge Power 4 ... 20 mA 4 ... 20 mA
transmitter located in the field and elec-
trically isolates the input signal from the
output signal. The device can be used in
both isolator and repeater power supply
operation.
Flow meter
+ 24 V DC

48 PHOENIX CONTACT
Isolate, convert, filter, amplify – Application examples

Pressure monitoring using a passive

Pressure sensor
isolator Active
Since the output-loop-powered isolator is
supplied via the current loop of an active 4 ... 20 mA Power 4 ... 20 mA
analog input module, no additional auxiliary
power is required.
On the input side, you can connect analog
signals from 2 mA to 40 mA or from 50 mV
to 30 V.

Temperature measurement using

a resistance temperature detector
with temperature transducer Resistance temperature detector Active

The freely adjustable temperature trans-

ducer enables you to connect resistance -200°C ... +850°C 4 ... 20 mA
temperature detectors and remote
resistance-type sensors with 2-, 3-, and
4-conductor connection technology.
The individual measured temperature
values are converted into a linear and
freely adjustable current or voltage signal. + 24 V DC

Temperature measurement using

a thermocouple with temperature Passive
Thermocouple
transducer
The freely adjustable temperature trans- -0°C ... +2,500°C 4 ... 20 mA
ducer enables you to connect various
thermocouples.
The individual measured temperature
values are converted into a linear and
freely adjustable current or voltage signal.
+ 24 V DC

PHOENIX CONTACT 49
Isolate, convert, filter, amplify – Application examples

Potentiometer measurement using

a measuring transducer
The configurable potiposition transducer
with automatic potentiometer detection
is used to connect potentiometers from Passive
0 ... 100 Ω to 0 ... 100 kΩ.
The individual position values are converted 0 ... 100 kΩ 4 ... 20 mA
into a linear and freely adjustable current or
voltage signal.

Potentiometer
+ 24 V DC

Level monitoring using a limit value

switch
The limit value switch enables you to record
and monitor analog signals from 0 ... 24 mA
or from 0 ... 12 V.
The PDT relay at the output switches loads 0 ... 20 mA DO
of up to 250 V AC/DC and max. 6 A. Radar level
sensor

+ 24 V DC

Level measurement in the Ex area

Radar level
using an Ex i repeater power supply
sensor
The repeater power supply and input signal Active/passive
conditioner is designed for the operation
of intrinsically safe 2-, 3- or 4-conductor Power 4 ... 20 mA 4 ... 20 mA
measuring transducers and mA sources in-
stalled in the Ex area. The analog measured
value is electrically isolated and transmitted
1:1 from the Ex area to the non-Ex area.
You can operate the output of the module
actively or passively.
+ 24 V DC

50 PHOENIX CONTACT
Isolate, convert, filter, amplify – Application examples

Temperature measurement in the Passive

Ex area using an Ex i temperature
transducer Pt100
-200°C ... +850°C 4 ... 20 mA
The programmable Ex i temperature trans-
ducer is designed for the intrinsically safe
operation of resistance temperature detec-
tors and remote resistance-type sensors
installed in the Ex area. The measured val-
ues are converted into a linear 0/4 ... 20 mA
signal to drive a non-intrinsically safe load.
+ 24 V DC

Proximity sensor detection in the DI 1

Ex area using an Ex i NAMUR signal Proximity IN 1
conditioner sensor NAMUR
DO 1
With the 2-channel NAMUR signal
conditioner, you can operate proximity
sensors installed in the Ex area as well as Zone 0, 1, 2
Zone 20, 21, 22 DI 2
unconnected contacts or contacts with Div. 1, 2
resistance circuit.
One changeover contact is available per Proximity IN 2 DO 2
sensor NAMUR
channel as a signal output.

+ 24 V DC

Controlling a regulating valve in

Zone 0, 1, 2
the Ex area using an output signal Zone 20, 21, 22
Active
conditioner Div. 1, 2
The solenoid drivers are designed for the
intrinsically safe control of Ex i solenoid 4 ... 20 mA 4 ... 20 mA
valves, alarm transmitters, and indicators
installed in the Ex area. The input uses
low/high signal logic. Regulating valve

The various output characteristic curves are

compatible with market-standard solenoid
valves.
+ 24 V DC

PHOENIX CONTACT 51
Discover more products for MCR technology
from Phoenix Contact
Discover more products that can be combined with our products for measurement
and control technology.

Shielded sensor/actuator cabling

Ensure error-free transmission of your analog
signals, even in environments with high
electromagnetic interference, with a complete
range of products and solutions for shielded
signal transmission of sensors and actuators.

52 PHOENIX CONTACT
System cabling for easy signal Surge protection for Connection technology for
routing MCR technology marshaling
Reliable signal transmission: the universal A large number of sensors and actuators Marshaling patchboards and marshaling
termination boards couple connectors to are monitored and controlled in applications terminals are used to marshal signals in
screw, Push-in or spring-cage terminal blocks for measurement and control technology. automation applications in a clearly arranged
1:1 – for IDC/FLK, D-SUB, ELCO, DIN rail A failure due to overvoltages can have manner. The products ensure space-saving,
or RJ45. Universal cables enable fast wiring devastating effects. Our surge protective clear, and error-free wiring. The disconnect
that is protected against polarity reversal. devices offer an ideal solution and help to and knife disconnect terminal blocks enable
avoid system failures for all applications. you to localize malfunctions quickly and easily,
and perform off-load maintenance.

PHOENIX CONTACT 53
COMPLETE line –
The comprehensive solution for the
control cabinet
COMPLETE line is a system comprising technologically leading and coordinated
hardware and software products, consulting services, and system solutions that
help you optimize your processes in control cabinet manufacturing. Engineering,
purchasing, installation, and operation become significantly easier for you.

Web code: #2089

54 PHOENIX CONTACT
Your advantages in detail:

Comprehensive product portfolio Intuitive handling Time savings across the entire
With COMPLETE line, we offer a complete Thanks to the simple, intuitive handling engineering process
product portfolio of technologically leading of the coordinated hardware components, The PROJECT complete planning and
products. This includes: you will save time during installation, startup, marking software supports the entire
• Controllers and I/O modules and maintenance. Push-in connection tech- process of control cabinet manufacturing.
• Power supplies and device circuit breakers nology enables you to wire applications The program features an intuitive user
• Terminal blocks and distribution blocks quickly – without the need for tools. The interface that enables the individual planning,
• Relay modules and motor starters broad, technologically leading product port- automatic checking, and direct ordering
• Signal conditioners folio will always provide you with the right of terminal strips.
• Safety technology product for standard or special applications.
• Surge protection
• Heavy-duty connectors

Reduced logistics costs Optimized processes in The new standard

Reduced variety of parts, thanks to standard- control cabinet manufacturing for the control cabinet
ized marking, bridging, and testing accessories. COMPLETE line supports you, from engi- Discover the extensive COMPLETE line
The COMPLETE line system coordinates neering through to manufacturing, in designing product portfolio and find out more about
products, design, and accessories so that you your control cabinet production as efficient COMPLETE line and your comprehensive
benefit from maximum reusability and thus as possible. Thus, your customized concept solutions for the control cabinet.
reduce your logistics costs. for optimizing your processes in control
cabinet manufacturing is created. Our terminal Visit our website:
strip production helps you to flexibly manage phoenixcontact.com/completeline
order peaks or to supply your control cabinet
production with fully assembled DIN rails
just in time.

PHOENIX CONTACT 55
In dialog with customers and partners worldwide
Phoenix Contact is a globally present, Germany-based market leader. Our group
is synonym for future-oriented components, systems, and solutions in the fields of
electrical engineering, electronics, and automation. A global network across more than
100 countries, and 17,400 employees ensure a close proximity to our
customers, which we believe is particularly important.
Iceland Finland

The wide variety of our innovative products makes Norway

Sweden Estonia

it easy for our customers to find future-oriented Denmark

Latvia
Lithuania
Ireland Belarus

solutions for different applications and industries. Canada

United Kingdom
Belgium
Netherlands

Blomberg, Germany
Poland
Russia

Luxembourg Czech Republic

We especially focus on the fields of energy, France

Switzerland
Austria

Slovenia
Slovakia
Hungary Moldova
Ukraine Kazakhstan Mongolia

Romania
infrastructure, process and factory automation. USA

Portugal
Spain Italy
Croatia
Bosnia and Serbia
Herzegovina Kosovo
Montenegro Bulgaria Georgia Uzbekistan
South Korea
Japan
Macedonia Armenia China
Turkey Azerbaijan
Greece
Tunisia
Lebanon Iraq
Morocco Cyprus Pakistan Taiwan, China
Bangladesh
Mexico Israel Kuwait
Algeria India Myanmar
Dominican Republic Jordan Bahrain
Guatemala Egypt Qatar Sri Lanka
Honduras Saudi Arabia
Nicaragua Thailand Philippines
Trinidad and Tobago UAE
Costa Rica
Panama Venezuela Nigeria Oman Malaysia Vietnam
Ghana
Colombia Cameroon Uganda Singapore
Kenya

Ecuador
Indonesia
Brazil
Peru Tanzania

Zambia
Bolivia Mozambique Mauritius
Namibia Zimbabwe
Botswana
Paraguay
South Africa
Chile

Uruguay

Australia
Argentina
New Zealand

You will find our complete

product range at:
phoenixcontact.com

© PHOENIX CONTACT 2019

Printed in Germany

PHOENIX CONTACT GmbH & Co. KG

MNR 52008032/2019-05-01/04

Flachsmarktstraße 8
32825 Blomberg, Germany
Phone: +49 52 35 3-00
IF 08-19.002.L3

Fax: +49 52 35 3-4 12 00

E-mail: [email protected]
phoenixcontact.com