0% found this document useful (0 votes)
36 views8 pages

Spec 27 03 24

Uploaded by

nambi.kumaresan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
36 views8 pages

Spec 27 03 24

Uploaded by

nambi.kumaresan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Item Item Item description Item Unit Consi Delivery

No Title Quant of gnee Period


ity Meas Id (in
ure number
of days)
1 Network Network camera ( Outdoor/Indoor) 2 each consig 30
camera ( Dome Camera: nee@
Outdoor/ Camera Type : Dome nstiw
Indoor) Sensor: 1/2.8” 2MP Progressive scan CMOS
Lens: 3.6 MM
Lens Mount : M12
Iris Type: Fixed aperture
Video Compression: Instastream/ H.265/Smart
H.264+/H.264/ H.264B/ MJPEG (only supported by
the sub stream)
Angle of View: Diagonal: 100°
Resolution: "1080P (1920 × 1080); 1.3M(1280 ×
960);720p (1280 × 720); D1 (704 × 576/704 × 480);
VGA
(640 × 480); CIF (352 × 288/352 × 240)"
Mirror Option: Mirror Option Supports
Motion detection : 4 area, Rectangle
Noise Reduction: 3D-DNR
Privacy Mask: "4 Area
up to 4 Area Privacy Mask Support "
Bit Rate : CBR/VBR
Event Trigger: Network disconnection; IP conflict;
illegal access; motion detection; video
tampering,safety exception
Smart Phone: iPhone, iPad, Android Phone
Edge Storage: FTP
Weatherproof Standard : IP67
IR Range: Up To 30 mtr
Casing: Metal + Plastic
Security: "Video encryption; configuration
encryption; Digest; WSSE; account lockout; security
logs; generation and importing of X.509 certification;
HTTPS; trusted boot; trusted execution;
trusted upgrade"
Power Consumption: 1.4W (12V DC); 2.2W (PoE)
Bullet Camera:Camera Type: Bullet
Sensor: 1/2.8” 2MP Progressive scan CMOS
Lens : 3.6 MM
Lens Mount : M12
Iris Type: Fixed aperture
Video Compression: Instastream/H.265/Smart
H.264+/H.264/ H.264B/ MJPEG (only supported by
the sub stream)
Angle of View: Diagonal: 100°
Resolution: "1080P (1920 × 1080); 1.3M(1280 ×
960);720p (1280 × 720); D1 (704 × 576/704 × 480);
VGA (640 × 480); CIF (352 × 288/352 × 240)"
Mirror Option: Mirror Option Supports
Motion detection : 4 area, Rectangle
S/N Ratio: >56dB
Back Light Compensation: BLC / HLC / DWDR
Noise Reduction: 3D-DNR
Privacy Mask: "4 Area up to 4 Area Privacy Mask
Support "
Bit Rate : CBR/VBR
Event Trigger: Network disconnection; IP conflict;
illegal access; motion detection; video tampering,
safety exception
Smart Phone : iPhone, iPad, Android Phone
Image Rotation: Support 90°/270° with 1080p
resolution and lower
Edge Storage: FTP
Weatherproof Standard : IP67
IR Range: Up To 30 mtr
Casing: Metal + Plastic
Security: "Video encryption; configuration
encryption; Digest; WSSE; account lockout; security
logs; generation and importing of X.509 certification;
HTTPS; trusted boot; trusted execution;
trusted upgrade"
Power Consumption: 1.4W (12V DC); 2.2W (PoE)
2 HIGH  10-bit HLG picture profile 1 No. consig 30
QUALI  Recording movies with 10-bit depth and nee@
TY 4:2:2 colour sampling nstiw
ADVAN  4K5 High Frame Rate 120fps recording
CED  High performance image-processing
VIDEO engine
CAMER  CMOS sensor, with 10.2 effective
A megapixels
 Dual XLR inputs and enhanced audio
capability
 High-definition 2.76 million-dot1 flexible
LCD touch panel
 Smart grip and Smart Handle
 SuperSpeed USB-C 5 Gbps (USB 3.2)
allows shooting data to be uploaded to a
PC at high speed.

 High performance image-processing


engine
 The Powerful image-processing engine
boasts class-leading speed performance,
minimising latency while providing
impressive real-time processing
capabilities.

 High sensitivity, wide dynamic range


 The full-frame 10.2-megapixel
configuration enables high sensitivity with
low noise throughout the camera's
sensitivity range by optimising the output
signal from the sensor.

 4K High Frame Rate 120fps recording
 Full-frame 4K (QFHD) recording at up to
120fps4 with autofocus is possible. Even at
high frame rates, ultra-detailed 4K
(QFHD) images are captured using full-
pixel readout without binning.
 Acclaimed cinematic colour
 The inclusion of acclaimed S-Cinetone
look, allows beautiful images to be
achieved directly in-camera.

 Preset and User 3D LUT compatibility
with Scene File
 The Scene File function provides powerful
colour interpretation right in the camera,
with a range of presets and custom User
3D LUT imports to fit your production or
style requirements.

 10-bit HLG picture profile
 An HLG (Hybrid Log-Gamma) HDR
picture profile, complete with the wide-
gamut BT.2020 colour space, can be used
for direct HDR (HLG) playback on
compatible TVs.
 [1] High flexibility to fine-tune images as
desired (colour grading required) [2]
Instant high-quality image (colour grading
not required)

 S-Log3 for better reproduction of
gradations
 S-Log3 gamma curves are available, with
S-Log3 designed for better reproduction of
gradations from shadows to the mid-grey
range (18% grey), enabling a dynamic
range of up to 15+ stops4.

 Recording movies with 10-bit depth and


4:2:2 colour sampling

This is capable of 4K internal recording,


encoding 10-bit depth and 4:2:2 colour
sampling with All-Intra compression.

A choice of battery types for different


applications

This is compatible with BP-U series battery packs.


The BP-U35, BP-U70, BP-U100, or BP-U60T can
be selected according to shooting needs.
3 Wireless Wireless Access point 4 No's consig 30
Access Features nee@
point Should support Dual band IEEE 802.11n 2.4GHz & nstiw
802.11ac 5GHz Wireless
Should support 1 x 10/100/1000Mbps 802.3af/at
PoE WAN Port
Should support 1 x 10/100/1000Mbps LAN Port
Should support 2 x 5dBi internal
Should be Ceiling Mount Design
Transmit power : 27dBm
WLAN Data Transfer Rates
IEEE 802.11b up to 11Mbps
IEEE 802.11g up to 54Mbps
IEEE 802.11n up to 300Mbps
IEEE 802.11ac up to 900Mbps
Wireless Functions
802.1q Tag based VLAN Support
Wifi Operational Modes : AP Only Mode, WISP
Mode, Gateway Mode, Universal Repeater Mode
Multiple SSID Support (Upto 8 SSIDs)
Wireless Security : WEP, WPA, WPA-PSK, WPA2,
WPA2-PSK
QoS-WMM Support
Advanced Features
Firewall: MAC Access Control, IP/MAC/URL
Filtering, Port Forwarding, DMZ, DHCP Server
Management : UPnP, SNMP (v1, v2c, v3), Web
based management, Backup & Restore Settings
Power
PoE or DC 12V/1A

4 Router Router with minimum 2 WAN ports and 3 RJ-45 4 No’s consig 30
Ports nee@
Interface: 2× Gigabit SFP WAN/LAN ports, 2× nstiw
Gigabit RJ45 WAN port, 8× Gigabit LAN ports
WAN Connection Type: Static , Dynamic IP, PPoE,
PPTP, L2TP
MAC Clone: Modify WAN MAC Address
DHCP: DHCP Server, DHCP Address Reservation,
Multi-IP Interfaces, Multi-Net DHCP
Routing: Static Routing, Policy Routing
Load Balance: intelligent Load Balance, Application
Optimized Routing, Link Backup, Online Detection
NAT: Multi-Net NAT, Virtual Server
ACL: IP, Port, Protocol, Domain Name Filtering,
NAT-DMZ
VPN: IPsec VPN, OpenVPN, and L2TP, PPTP VPN
VPN Tunnels: 20 IPSec VPN Tunnels, 16
OpenVPN Tunnels, 16 L2TP/PPTP Tunnels,
Concurrent Sessions: 24,980
5 Internal Internal PCI modems of at least four different makes 1 each consig 30
PCI and types nee@
modems nstiw
of at
least
four
different
makes
and
types
6 External External Modems of at least two different makes 1 each consig 30
Modems and types nee@
of at nstiw
least two
different
makes
and
types
7 Media Media convertor: 4 No's consig 30
converto Standards: IEEE 802.3 10 Base-T, IEEE 802.3u 100 nee@
r Base-TX/FX standard nstiw
Operation mode: Full duplex or Half duplex
Ports: one UTP RJ-45 10/100/1000, one 1000 Base-
LX SC port
TP Port (Copper port): Auto Negotiation and Auto-
MDI-X/MDI-X cross line.
Transmission distance: 20 Km
Operating Wavelength: 1310 nm
Fiber Cable Type: Single-mode fiber type : 8.3/125,
8.7/125, 9/125 or 10/125μm
Receiver Sensitivity: -24dBm
LED Indicator: link/activity, full/half, 10M/100M,
Fiber Signal Detection, Power
Power supply: External 5V DC 1A adaptor
Operating Temperature: 0°C - 50°C
8 LAN LAN Cable tester- 2 No’s consig 30
Cable Advanced Network Cable Tester With PoE& NCV & nee@
tester Lamp For CAT5e/CAT6/CAT6a, Multifunction Wire
nstiw
Tracker

9 Router Router 1 No's consig 30


with Hardware Specification nee@
high end The proposed firewall should not consume more nstiw
specifica than 1RU Rack-mountable space.
tions The appliance should have multicore processor
based architecture.
The appliance should have minimum 8 x
10/100/1000 Base T Ethernet Port.
The appliance should have minimum 2 x USB 3.0
port and one Console Port
General Firewall Features
The Firewall should support BGP,OSPF, RIP v1/v2
routing protocol and IPv4 & IPv6 functionality (Both
phase 1 and Phase2).
Solution should support Dead Peer Detection,
DHCP Over VPN, IPSec NAT Traversal, Route-
based VPN over OSPF, RIP, BGP.
The Firewall solution should support policy based
routing,Application based routing and also Multi
Path routing.
Should support Zero-Touch registration &
provisioning using mobile App.
Proposed solution should have bandwidth quota and
time quota for manageability of users.
solution should support policy based
routing,Application based routing and also Multi
Path routing.
Performance & Scalability
The appliance should have minimum Firewall
Throughput of 3 Gbps or better
The appliance should able to handle minimum 9K
new session per second or better
The appliance should able to handle minimum 1.5
Gbps Application inspection Throughput or better
The appliance should have minimum Antivirus/Anti-
malware Throughput of 1 Gbps or better
The appliance should have minimum IPS
Throughput of 1.5 Gbps or better
The appliance should have minimum Firewall Threat
prevention Throughput of 1 Gbps or better
The appliance should have minimum VPN
Throughput of 1.3 Gbps or better
The appliance should have minimum 100 Number of
Ipsec VPN Peers supported (Site to Site)
The appliance should have minimum 200 Number of
Ipsec VPN Peers supported (Client to Site)
The appliance should have minimum 100 Number of
SSL VPN Peers supported (Client to Site)
The appliance should have minimum 900000
Concurrent Session/Concurrent Connection
The appliance should have minimum 500 Mbps
TLS/SSL inspection throughput (DPI SSL)
The appliance Should support 60+ Web categories
The appliance Should support 3000+ application
Signature
The appliance Should support 5000+ IPS Signature
The appliance should have minimum 200000 Deep
Packet Connections.
Solution should support Hardware redundancy from
day 1.
Hardware failover should not cause any
interruptions to existing connections.
Firewall Security Features
The Firewall should scan for threats in both inbound
and outbound and intra-zone traffic for malware in
files of unlimited length and size across all ports and
TCP streams by GAV & Cloud AV.
The proposed firewall should support Bi-directional
raw TCP inspection that scans raw TCP streams on
any port .
The Firewall must support Proxy-less and non-
buffering inspection technology for DPI scanning
without introducing file and stream size limitations.
The Firewall should support deep packet SSL to
decrypt HTTPS traffic for scanning(IPS, Gateway
Antivirus, Content Filtering, Application control)
transparently for future requirement and then re-
encrypt and send to destination if no threat found.
The firewall must support cloud & appliance based
Sandbox technology and OEM must have own
Advanced Threat Protection solutions.
The cloud or appliance based sandbox should have
technology that detects and blocks malware that
does not exhibit any malicious behavior and hides
its weaponry via encryption. Should detect and
block mass-market, zero-day threats and unknown
malware.
The Firewall should have the capability to
block/prevent from Side Channel attacks, memory
based attack as well as zeroday malware and
Never-before-seen malware attack .
Should support both for analysis of a broad range of
file types, either individually or as a group, including
executable programs (PE), DLL, PDFs, MS Office
documents, archives, JAR, and APK plus multiple
operating systems including Windows, Android, Mac
OS X and multi-browser environments.
Should have ability to prevent potentially malicious
files from entering the network and those files sent
to the sandbox for analysis to be held at the
gateway until a verdict is determined.
The Firewall sholud have Pictorial view of a
particular access rule, NAT and Routing rule which
helps in finding real-time statistics.Displays the rules
which are actively used or not being used & enabled
or disabled.
The proposed system should have the feature
option to integrate with cloud-based or on-prem
centralized management & reporting system. Both
solutions should be from the same OEM.
The proposed system should be SD WAN Enable
without adding any additonal hardware components
& Necessary licenses, if required, need to be
provisioned from day 1.
The integarted cloud based sandboxing must have
capability to scans 10Mb of files size at a time.
The Firewall should detect and prevent hidden
attacks that leverage cryptography, blocks
encrypted malware downloads, ceases the spread
of infections, and thwarts command and control
(C&C) communications and data exfiltration
Management & Reporting
Centralized Reporting and Management feature
can be either part of the same solution or separate
solution from same OEM.
Reporting and Management Solution can be
eitheron prem based or cloud based SaaS solution
.On prem based solution can be a Hardware based
or Virtual appliance based that supports VMWARE
Esxi , MS Hyper V .
Solution should support exporting of reports in
PDF,CSV and XML formats .
Solution should supports reports on User ,
Applications ,Viruses ,Botnet ,Intrusions, Web
activity ,Spyware etc .
License And Warranty
Warranty - 5 years comprehensive onsite warranty
including 24x7 telephone, email and web-based
technical support.
OEM should have TAC and R&D center in INDIA.
Manufacturer’s warranty should be mentioned
minimum 05 (Five ) years warranty including all
services like GAV, IPS, Antispyware or antimalware,
CFS, Application control, BoT protection , Advance
Threat Protection,Patch & Firmware upgrade and
Hardware.
Bidder must carry out on site installation, testing and
commissioning.

You might also like