LEVEL GAUGE & SAMPLE COCK VALVE
Level Gauge Valve with Ferrule End
Application- Used to detect the level of liquid inside a storage tank.
Size Availability- 1”
Material Availability- SS 316L
Connection Availability- Ferrule End
Upper Valve Lower Valve
Sample Cock Valve with Ferrule End
Method of Operation- Turning the handle allows collection of samples.
Size Availability- 1”
Material Availability- SS 316L
Connection Availability- Ferrule End
Size A B C D E
1” 91.5 70 50.5 29 12
1.5” 91.5 70 50.5 29 12
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 31
SANITARY THREE-PIECE BODY BALL VALVE
Method of Operation-
Turning the handle turns the valve ball either parallel or perpendicular to the flow to
control or shut off flow. Can be mounted to most commercial actuators due.
Size Availability- 0.5" to 4"
Material Availability- Body in SS 304 and SS 316L, Gasket in PTFE
Connection Availability- Weld Ends, Ferrule Ends
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 32
THREE-PIECE BODY BALL VALVE
No. Part Name Material
1 Body ASTM A351 CF8M
2 Cap ASTM-A351 CF8M
3 Hex Nut 304
4 Bolt 304
5 Seat PTFE
6 Ball A351 CF8M
7 Stem 316
8 Stem Packing PTFE
9 Ring PTFE
10 O-Ring Viton
11 Thrust Washer PTFE
12 Gasket PTFE
13 Butterfly Spring 304
14 Hex Nut 304
15 Hex Nut 304
16 Washer 304
17 Bolt 304
18 Butterfly Spring 304
19 Handle 304
20 Handle Nut 304
21 Lock Washer 304
22 Handle Cover Plastic
23 Stop Pin 304
Three-Piece Body Ball Valve Ferrule & Weld Ends
Size A B C C D E F G H I Torque
Weld Ferrule
0.5” 90.5 9.4 12.7 25.2 64 131 9 F03 F04 37 4~10
0.75” 103.4 15.75 19.5 25.2 68 131 9 F03 F04 43 4~10
1” 114.2 22.1 25.4 50.5 86 169 11 F04 F05 51 5~15
1.5” 136.7 34.8 38.1 50.5 122.5 213 14 F05 F07 71 10~25
2” 153.2 47.5 50.8 64 122.5 213 14 F05 F07 79 15~30
2.5” 167.3 60.2 63.5 77.5 139.5 213 14 F05 F07 94 20~35
3” 192.3 82.9 76.2 91 165 320 17 F07 F10 109.5 40~65
4” 239.5 97.4 101.6 119 177 320 17 F07 F10 123 40~80
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 33
TWO-PIECE BODY BALL VALVE
Two-Piece Body Ball Valve
Size øA øB L
0.5” 9.4 12.7 74
0.75 15.8 25 99.5
1” 22.1 50.5 110
1.5” 34.8 50.5 134
2” 47.5 64 156.5
2.5” 60.2 77.5 170
3” 72.9 91 195
4” 97.4 119 240
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 34
BUTTERFLY VALVE
Method of Operation-
Turning the handle turns the disc either parallel or perpendicular or anywhere in
between to control the flow.
Can be equipped with an Actuator to be controlled by air, spring, or electric.
Size Availability- 0.5" to 4", DN25 to DN100
Material Availability- Body in SS 304 and SS 316L, Gaskets in EPDM, Silicone, or BUNA
Connection Availability- Weld Ends, Ferrule Ends, other Sanitary Union connections
Pressure Rating- Up to 9.5 bar, decreases along with size
Torque Required for Full Open and Close-
1” 1.5” 2” 2.5” 3” 4” 6”
9.8Nm 9.8Nm 13Nm 15Nm 20Nm 30Nm 70Nm
Components List:
No. Name
1 Knob
2 Steel Bar
3 Spring ST.ST
4 ST.ST
5 Holder
6 Body
7 Disc
8 EPDM Rubber Seat
9 Screw Bolt
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 35
BUTTERFLY VALVE
Butterfly Valve with Weld Ends
Size øA øB D øE L
0.5” 9.5 12.7 23 79 49.5
0.75 15.8 19.50 23 79 49.5
1” 22.1 25.4 23.5 79 49.5
1.5” 34.8 38.1 23.5 85 52.5
2” 47.5 50.8 26 100 60
2.5” 60.2 63.5 27 115 67.5
3” 72.2 76.2 28 127 73.5
4” 97.6 101.6 30 156 88
6” 146.8 152.4 40.5 215 142
Butterfly Valve with Ferrule Ends
Size øA øB D øE L
0.5” 9.5 25.2 35 79 49.5
0.75 15.8 25.2 35 79 49.5
1” 22.1 50.5 35 79 49.5
1.5” 34.8 50.5 35 85 52.5
2” 47.5 64.0 37 100 60
2.5” 60.2 77.5 38 115 67.5
3” 72.2 91.0 39 127 73.5
4” 97.6 119.0 45 156 88
6” 146.8 166.8 62.2 215 142
DIN Butterfly Valve with Weld Ends
Size øA øB D øE L
DN25 26 29 23.5 79 49.5
DN32 32 35 23.5 82 48.5
DN40 38 41 25 92 52.5
DN50 50 53 26 106 63.5
DN65 66 70 28 127 71.5
DN80 81 85 29 140 78.5
DN100 100 104 30 156 87.5
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 36
BUTTERFLY VALVE ACTUATOR
Without Solenoid Valve With Solenoid Valve
and Limit Switch and Limit Switch
Operation Instructions:
1) Signal Transfer:
a) 10-30VDC proximity switch 1 or 2pcs (PNP or NPN),
b) or 3A 125 VAC, 30 VDC micro switch 2 pcs.
2) Air/Air (double effect) actuator or Air/Spring (single effect).
Shut Off Time (seconds) 1.5
Weight (kg) 2.5
Operating Air Pressure 6Kg/cm2 5-9 bar
Air Consumption at 5 bar 0.266 liters
Material SS 304
Max Output Torque (N/M) 20
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 37
NON-RETURN VALVE / CHECK VALVE
Components List:
No. Name
1 Short Body
2 Long Body
3 Clamp
4 13 PG
5 Seal Ring
6 ST.ST Spring
7 Flow Support Plate
8 Disc
The sanitary Check Valve contains a stainless-steel body which houses a disc supported
by a spring. When enough pressure is applied, the disc opens and allows product to flow
through.
Method of Operation-
Works automatically when enough flow pressure pushes the disc so that the product
flows through.
When pressure is not high enough, the disc remains pushed shut so that the product
does not flow through.
Size Availability- 0.5" to 4"
Material Availability- Body in SS 316L, Gaskets in EPDM
Connection Availability- Weld Ends, Ferrule Ends
Pressure to Open Valve- 0.5 psi to 3 psi, depending on size
Opening Pressure (PSI)
0.5” 0.75” 1” 1.5” 2” 2.5” 3” 4”
0.5 0.5 3 1.6 0.6 1.3 0.8 0.9
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 38
NON-RETURN VALVE / CHECK VALVE
Pressure required for opening the valve fitted in a vertical pipe (max pressure- 10 bar):
Check Valve with Weld Ends
Size øA øB øC L1 L2
0.5” 50.5 12.7 9.4 35 22
0.75” 64 19.05 15.75 35 22
1” 64 25.4 22.1 47.5 30.5
1.5” 77.5 38.1 34.8 50 30
2” 91 50.8 47.5 58 30
2.5” 106 63.5 60.2 58 37
3” 119 76.2 72.9 70 36
4” 144.5 101.6 97.6 68 37
Check Valve with Ferrule Ends
Size øA øB øC L
0.5” 50.5 25 9.5 88.9
0.75” 64 25 15.8 88.9
1” 64 50.5 22.1 104.8
1.5” 77.5 50.5 34.8 115.9
2” 91 64 47.5 128.6
2.5” 106 77.5 60.2 136.5
3” 119 91 72.9 155.6
4” 144.5 119 97.6 206.4
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 39
Diaphragm Valve
Diaphragm Valve with Ferrule Ends and Weld Ends
Size L A Kxd Kxd H
Ferrule Weld
0.5” DN10 89 33 25 x 9.4 12.7 x 9.4 70
0.75 DN15/20 109 58 25 x 15.8 19.1 x 15.8 70
1” DN25 127 90 50.5 x 22.1 25.4 x 22.4 119
1.25” DN32 159 90 50.5 x 28.5 31.8 x 28.5 139
1.5” DN40 159 114 50.5 x 34.8 38.1 x 34.8 139
2” DN50 190 140 64 x 47.5 50.8 x 47.5 150
2.5” DN65 216 140 77.5 x 60.2 63.5 x 60.2 162
3” DN80 256 140 91 x 72.9 76.2 x 72.9 170
4” DN100 350 140 119 x 97.4 101.6 x 97.4
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 40
PRESSURE RELIEF VALVE
The sanitary Pressure Relief Valve contains a disc supported by springs. When enough
pressure is applied, the disc opens and allows unwanted pressure to flow through.
Method of Operation-
Works automatically when enough pressure pushes valve disc to release pipe line air
pressure.
Size Availability- 1”to 4”
Material Availability- Body in SS 304 and SS 316L
Connection Availability- Weld Ends, Ferrule Ends
Size ød øD øK H1 L H
1” 22.4 25.4 50.5 61 61 227
1.5” 35.1 38.1 50.5 58 59 227
2” 47.8 50.8 64 66 66 270
2.5” 59.5 63.5 77.5 77 77 318
3” 72.2 76.2 91 97 97 351
4” 97.6 101.6 119 127 135 399
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 41
VACUUM RELIEF VALVE
The sanitary Vacuum Relief Valve contains a disc supported by springs. When enough
pressure is applied, the disc opens and allows unwanted pipe line air to flow through.
Method of Operation-
When enough pressure pushes valve disc to release pipe line air pressure.
Similarly, when there is enough vacuum pressure present, the disc is pushed in the
opposite direction to relief pipe line vacuum pressure.
Size Availability- 2.5"
Material Availability- Body in SS 304 and SS 316L
Connection Availability- Weld End
Pressure to Open Valve- 0.02 bar Opening Pressure or 0.01 bar Vacuum Pressure
Components List:
No. Item Name Material Qty.
1 Male Part AISI 304L 1
2 Nut AISI 304L 1
3 Taper Blank AISI 304L 1
4 Locking Device PTFE 1
5 Upper Disc AISI 304 1
6 Cap AISI 304 1
7 Ball AISI 304 1
8 Vacuum Spring AISI 304 1
9 Screw 3Max8 AISI 304 2
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 42
THREE WAY PLUG VALVE
Method of Operation-
Turn the handle rotates the conical plug inside the valve to divert and shut off flow.
The only Sanitary Valve to achieve shut off and divert flow at the same time.
Size Availability- 0.5" to 4”
Material Availability- Body in SS 304 and SS 316L, Gaskets in EPDM or BUNA
Connection Availability- Weld Ends, Ferrule Ends, other Sanitary Union connections
Pressure Rating- Up to 1.7 bar, decreases along with size
Three Way Plug Valve with Weld/Male/Ferrule Ends
OD OD A A A B D
3A DIN Weld Male Ferrule
1” DN25 66.3 95.3 94.9 26 139.19
1.5” DN40 85.1 118.1 113.7 35 139.19
2” DN50 114.2 149.2 142.8 45 143.01
2.5” DN65 132 172 160.6 55 143.69
3” DN80 168.6 213.6 197.2 70 143.81
4” DN100 206.3 260.3 234.9 75 174.21
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 43
INLINE SIGHT GLASS
Application- The clear tube allows operators an easy inspection of the product flow.
Size Availability- 1" to 4"
Material Availability- SS 316L body houses a Borosilicate Glass Tube
Connection Availability- Weld Ends, Ferrule Ends
Inline Sight Glass with Weld Ends
Size øA øB øC L
1” 22.1 25.4 79 130
1.5” 34.8 38.1 85 128
2” 47.5 50.8 100 133
2.5” 60.2 63.5 115 131
3” 72.9 76.2 127 134
4” 97.6 101.6 156 135
Inline Sight Glass with Ferrule Ends
Size øA øB øC L
1” 22.1 50.5 79 153
1.5” 34.8 50.5 85 151
2” 47.5 64 100 155
2.5” 60.2 77.5 115 153
3” 72.9 91 127 156
4” 97.6 119 156 165
: 03-3323 5027, 011-3903 6994 | : [email protected] | : www.nkeflow.com 44
