Photo IC for optical link
S7727
Receiver for 156 Mbps POF communications
S7726 is designed for high-speed POF (Plastic Optical Fiber) communications. Both devices are molded into miniature plastic
packages with lenses, allowing easy and efficient coupling to a POF. S7727 uses a monolithic photo IC that ensures high re-
sistance to external noise and high reliability, and provides P-ECL voltage conversion output.
Features Applications
Photo IC receiver for POF data link Plastic optical fiber communications (FA, office ma-
Monolithic structure immune from external noise chine, home automation, LAN)
Data transmission in locations subject to high
Data rates from 4 Mbps to 156 Mbps
electromagnetic noise
P-ECL voltage conversion output
(Note: Unlike normal P-ECL output, S7727 output
cannot be terminated with 50 Ω.)
Designed to be used with L10881
Absolute maximum ratings
Parameter Symbol Condition Value Unit
Supply voltage Vcc Ta=25 °C -0.5 to +7.0 V
Output voltage Vo Ta=25 °C -0.5 to Vcc + 0.5 V
Output current Io Ta=25 °C 8 mA
Power dissipation Pmax Ta=25 °C 250*1 mW
Operating temperature Topr -20 to +70 °C
Storage temperature Tstg -40 to +85 °C
Soldering - 230 °C, 5 s, at least 1.5 mm away from package surface -
*1: Derate power dissipation at a rate of 1.7 mW/°C above Ta=25 °C
www.hamamatsu.com 1
Photo IC for optical link S7727
Electrical and optical characteristics (Ta=25 °C, Vcc=5.0 V)
Parameter Symbol Condition Min. Typ. Max. Unit
Bi-phase signal
Data rate fD 4 - 156 Mbps
NRZ conversion
Current consumption Icc *2 * 3 * 6 - - 40 mA
High level output voltage Voh Ioh= -1 mA *2 *3 *6 3.9 - 4.3 V
Low level output voltage Vol Iol= -0.5 μA *2 *3 *6 2.9 - 3.4 V
Minimum overload Pimax *2 *3 *4 *5 *6 -2 - - dBm
Minimum receiver input power Pimin *2 *3 *4 *5 *6 - - -22 dBm
Rise time tr - - 3 ns
10 to 90% *2 *3 *6
Fall time tf - - 3 ns
Pulse width distortion ΔT *2 *3 *4 *6 -3 - 3 ns
Jitter Δtj *2 *3 *4 *6 - - 3 ns
*2: Measured with 156 Mbps input signal (Bi-phase signal)
*3: A 3 pF capacitor is connected to GND as a capacitive load (including parasitic capacitance such as probes, connectors and
evaluation PCB patterns)
*4: An optical input waveform is generated with a Hamamatsu standard transmitter.
*5: A detectable signal level is an average value, measured using a plastic fiber (GH4001 made by Mitsubishi Rayon).
*6: A 3 kΩ resistor is externally connected between Q and GND and also between QB and GND.
Note)
O A bypass capacitor (0.1 μF) connected at a position within 2 mm from the lead, and a 4.7 μF capacitor is also connected to the power
supply line nearby.
O The optical axis of the package lens is exactly aligned with the center axis of the optical plug, and the gap between the lens surface
and the optical reference plane of the plug is 0.1 mm.
O If modulated light at 4 Mbps or less (including DC light and no light input) is input to S7727, the high and low levels cannot be
discerned.
Dimensional outline (unit: mm)
1.77
5.2 ± 0.3
(Including burr) 0.97
5.0 0.69
10°
10°
(Including burr)
1.4
1.8
4.5 ± 0.3
4.3
4.3
(1.5) (2.15)
(0.9)
0.5
0.4
6.6 ± 0.4
0.25
1.27 1.27 1.27
(Specified at the lead root)
(0.9) QB
GND
10° (0.9)
Q
Vcc
Tolerance unless otherwise
noted: ±0.1, ±2°
Shaded area indicates burr.
10°
Values in parentheses indicate
5.0 reference value.
KPICA0029EC
2
Photo IC for optical link S7727
Information described in this material is current as of December, 2011.
Product specifications are subject to change without prior notice due to improvements or other reasons. Before assembly into final products, please contact
us for the delivery specification sheet to check the latest information.
Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or
a suffix "(Z)" which means developmental specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product
use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
3
Cat. No. KPIC1034E04 Dec. 2011 DN
