easyE-35
D - F i les: de
CA bach.
ans
ad.b
www.c
Speed and Force:
Gear ratio C D E F G H
easyE-35 12/24VDC power supply, permanent magnet motor
Force 24V (dyn. push and pull) [N] 120 400 600 900 1600 2200
Speed at maximum load [mm/s] 33 16 12 7,5 4 3
Force 12V (dyn. push and pull) [N] - 400 600 900 1500 2000
Speed at maximum load [mm/s] - 16 9 7,5 3,5 2,5
Current at maximum load: 12VDC = 3,6A, 24VDC = 1,8A
Axial backlash: +/- 0.5mm, General dimensional variation: +/- 1mm
EL Clevis UL/
Hall EN60.601 Harsh Emergency
rear Environment lowering / spline
Gear ratio C, D, E, F stroke + 160
+10 +10 +10 +11 -
Gear ratio G, H stroke + 170
if stroke >750mm: EL+100mm (on request)
Features:
Stroke length: 50, 100, 150, 200, 250, 300, 350, 400, 500 and 750mm (others on request)
Cable: 1m, 2X0.52mm² (AWG20), Ø=4.8mm, black, Molex Mini-Fit Jr. 6 pin
Bending radius: 6x cable diameter
Materials: Motor and actuator tube are powder coated steel or stainless steel
Piston rod is Aluminium
Front and rear brackets are Aluminium or stainless steel
Protection class: IP66 (standard), harsh environment (according to IP68 and IP69)
Max. static load/ easyE-35: Rear brackets: 2000N - Alu/AISI: 5.400N
Self locking force Depending on stroke length for push-applications
Temperature: -20°C to +70°C (easyE-35 and easyE-50)
Storage: -40ºC to +70ºC
Duty cycle: Max. 10% or 2 minutes in use followed by 18 minutes rest
24V 12V
Connecting parts:
Code: Code: Code: Code:
A1M (Alu) A1K (Alu) E1M (Alu) E1K (Alu)
B1M (PA) B1K (PA)
C1M (Stainless) C1K (Stainless) Max. static load: Max. static load:
E1M: 5400N E1K: 5400N
Max. static load: Max. static load:
A1M: 5400N A1K: 5400N
B1M: 2000N B1K: 2000N
C1M: 5400N C1K: 5400N
The flyer is subject to technical alterations and printing mistakes.
Bansbach easylift GmbH
Barbarossastraße 8 Tel. +49 (0) 7172/9107-0 [email protected]
D-73547 Lorch Fax +49 (0) 7172/9107-44 www.bansbach.de
12/2022
