

Specifications Exterior-100-IP68 1/3

The Exterior 100 IP68™ is an exceptionally rugged and


compact lighting fixture designed for extreme
outdoor and underwater environments, such as
fountains, pools, building facades, landscaping,
cruise ships - you name it.

Ideal for applications requiring superb color mixing

(RGBW) or high quality white light (cold, neutral or
warm).

n Four high power pre-mixed LEDs: no color separation or shadows

n Broad color palette (RGBW)
n Color calibration ensuring uniform colors across fixtures
n White light options: Cold, Neutral and Warm White
n Extremely rugged outdoor / underwater design (IP68)
n Discreet low voltage cabling
n Choice of narrow or medium beam angles
n DMX control

Physical Exterior 100 Luminaire:

Length: 165 mm including cable gland and cable exit
Width: 128 mm including mounting/tilt adjustment fasteners and side-routed cable
Height: 166 mm including mounting bracket
Weight: 1.4 kg including mounting bracket
Splitter:
Length: 133 mm including cable glands
Width: 80 mm
Height: 59 mm
Weight: 230 g
Power Supply Unit, EU model:
Length: 355 mm
Width: 146 mm including cable glands
Height: 83 mm
Weight: 2.8 kg
Power Supply Unit, US model:
Length: 355 mm
Width: 186 mm including cable glands
Height: 90 mm
Weight: 3.4 kg

Dynamic Effects Color mixing: RGBW (RGBW models)

Intensity: 0 - 100% (all models)

Control and Programming Control options: DMX, programmable default scene

Color control modes: RGB, RGBW (RGBW models)
Control modes: Calibrated and raw (all models)
DMX channels: 1 (CW, NW and WW models), 3/4 (RGBW models)
Setting and addressing: IR remote control unit, RDM-compliant controller
Dimming resolution: 14-bit (internal)
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20

Olof Palmes Allé 18 8200 Århus N Denmark Tel. +45 87 40 00 00 Fax +45 87 40 00 10

 
Specifications Exterior-100-IP68 2/3

Receiver: RS-485
Firmware update: Serial upload via DMX link

Optics Light source: Cree MC-E high-power emitters

Color temperature (CW model): 6500 K
Color temperature (NW model): 4000 K
Color temperature (WW model): 2700 K
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer´s test conditions:

Construction Color: Steel grey (custom colors available upon request)

Housing: Aluminum with micro-arc oxidation coating, stainless steel protection frame
Mounting bracket: 1.5 mm stainless steel
Front glass: Polycarbonate with UV and mechanical protection coating
Protection rating: Luminaire IP68, Splitter IP65 (IP68 with sealing compound), PSU IPX7

Installation Orientation: Any

Vertical aiming: 330°
Minimum distance to illuminated surfaces: 0.1 m
Mounting: Surface mount, 35 mm DIN rail, mounting post, ground stake

Connections All cable entries: IP68 cable gland

Internal, power and data: Quick connector terminals

Electrical Power supply unit: External PSU in IPX7-rated housing

AC power (input to EU model PSU): 100-240 V nominal, 50/60 Hz
AC power (input to US model PSU): 100-240 V nominal, 60 Hz
System power (output from PSU): 20 - 40 VDC (36 VDC nominal)
Power consumption, steady state, all LEDs at zero intensity: 0.42 W per luminaire

Typical Power and Current Calibrated RGB mode, RGBW Luminaire:

12 W, 0.4 A at 30 VDC:
Uncalibrated RGBW mode, RGBW Luminaire:
18 W, 0.6 A at 30 VDC:
Calibrated mode, white (CW, NW or WW) Luminaire:
17 W, 0.6 A at 30 VDC:
Uncalibrated mode, white (CW, NW or WW) Luminaire:
18 W, 0.6 A at 30 VDC:
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:

Thermal Cooling: Convection

Maximum ambient temperature (Ta max.): 45° C
Minimum ambient temperature (Ta min.): -40° C, power must be maintained below 0° C

Approvals EU safety: EN 60598-1, EN 60598-2-1

EU EMC: EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3
US safety: UL 1598, UL 8750
US Safety approvals apply to the entire system using the US model PSU:

Included Items Included with luminaire:

3 m luminaire cable (pre-installed):
Adjustable mounting bracket:
Included with Splitter:
Blanking plug for sealing unused luminaire cable gland:
Blanking plug for sealing unused hybrid cable gland:
DMX line terminators:

Olof Palmes Allé 18 8200 Århus N Denmark Tel. +45 87 40 00 00 Fax +45 87 40 00 10

 
Specifications Exterior-100-IP68 3/3

Included with PSU:

Blanking plug for sealing unused data cable gland:
Two blanking plugs for sealing unused mains power or hybrid cable glands:
DMX line terminators:
Safety and installation guide:

Accessories Exterior 50 & 100 infrared remote control: 90510210

Exterior 100 light shield, narrow, set of five: 90510240
Exterior 100 light shield, medium, set of five: 90510250
Exterior 100 light shield, wide, set of five: 90510260
Exterior 50 & 100 standard mounting post, 270 mm (10.6 in.): 90510310
Exterior 50 & 100 telescopic mounting post, 160-290 mm (6.3-11.4 in.): 90510300
Exterior 50 & 100 ground stake: 90510320
IP68 Sealing Compound Set (for use with Splitters): 90510220
Gel-sealed cable connection box for extending luminaire cable: 90510230
Exterior 50 & 100 luminaire cable extn., 10 m, gel-sealed conn. box: 90510200
Exterior 50 & 100 splitter link hybrid cable, 25 m: 90510170
Exterior 50 & 100 splitter link hybrid cable, 50 m: 90510180
Exterior 50 & 100 splitter link hybrid cable, 100 m: 90510190
Hybrid cables carry both power and data:

Related Items Martin M-PC V3™ Pro (up to 64 DMX universes) incl. Martin USB Duo™: 90732010
Martin M-PC V3™ Basic (up to 8 DMX universes) incl. Martin USB Duo™: 90732070
Martin USB Duo™ USB/DMX Interface Box: 90703010

Spare Parts 3.15 AT (slow-blow) primary fuse for EU model PSU: 05020013

Published on: 8 Jul 2014. © 2013-2014 Martin Professional ApS. Specifications subject to change without notice

Olof Palmes Allé 18 8200 Århus N Denmark Tel. +45 87 40 00 00 Fax +45 87 40 00 10
