BRICKWORKS AND CONCRETE LABORATORY (DDC 10022)
LECTURER’S NAME: PUAN FOUZIAH BINTI AHMAD
NAME OF GROUP MEMBERS REGISTRATION NUMBER
AHMAD SYAHMI NAIM BIN 13DKA23F1058
SUHAIMI
DAENG MUHAMMAD AKIF 13DKA23F1043
DARWISY BIN AZHAR
WAN SYAKIRAH BINTI WAN 13DKA23F1046
YUSAIMI
NUR AINI SUFIA BINTI RAZALI 13DKA23F1049
EQUIPMENT FOR BRICK WORK
NAME FUNCTION
• Used for mixing mortar and leveling mortar on brick or block
building materials.
• Used for lifting mortar from mortar boards, plastering and
Trowel
leveling mortar on top walls, made vertical connection,
removing the mortar squeezed out in under the rock.
• Used for fills and packing connection.
Pointing Trowel • Dotter is used for vertical connection.
• Bedder is used for transverse connection.
• To measure off the storey height to ensure all measurements are
Gauge Rod
consistent.
Page 2 of 6
NAME FUNCTION
• An instrument that through the positioning of a bubble in the
Spirit Level
liquid can show the user to horizontal and vertical surfaces.
• Used for cutting and aiming brick to make the form more surface
Scutch Hammer
smooth.
Comb Hammer • Used for aiming smooth shape.
Club Hammer • Used with tools – cutting tools such as bolster, chisel and others.
Page 3 of 6
NAME FUNCTION
Brick Hammer • Used to split bricks cleanly and chip away ny small pieces of stone.
• Used for scooping ingredients such as sand, cement, land and
Shovel
others.
• Used for measuring the mix concrete, mortar and so on.
Bucket
• To supply mortar in the process of construction brick wall.
Page 4 of 6
Chisel • Used for cutting tiles.
NAME FUNCTION
• Used for laying mortar when creating work, plaster work and
Hawk
pointing work.
• Used for measuring and calculating brick and block quantities and
Measuring Tape
measuring course height.
Steel Square • Used for getting the right 90 degrees angle.
Page 5 of 6
• Used for getting straightness when building more than five walls
Line Pin
long bricks.
Page 6 of 6
