[ 0.

000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 4.14.98-37-boundary-17b (tele@bionic-rz) (gcc version
7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)) #37 SMP PREEMPT Thu Feb 3 06:36:03 PST
2022
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction
cache
[ 0.000000] OF: fdt: Machine model: Freescale i.MX6 Quad SABRE Lite Board
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x3c000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-
dma-pool
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat 80e69b00, node_mem_map ab657000
[ 0.000000] Normal zone: 2304 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x42c with
crng_init=0
[ 0.000000] percpu: Embedded 16 pages/cpu @ab5ef000 s35788 r8192 d21556 u65536
[ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: console=ttymxc1,115200 vmalloc=400M
consoleblank=0 rootwait fixrtc cpu=6Q board=sabrelite mxc_hdmi.only_cea=1
root=/dev/mmcblk1p1 splash plymouth.ignore-serial-consoles loglevel=4
reset_cause=0x1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 689940K/1048576K available (9216K kernel code, 513K rwdata,
2556K rodata, 1024K init, 452K bss, 30956K reserved, 327680K cma-reserved, 0K
highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc0800000 - 0xff800000 (1008 MB)
lowmem : 0x80000000 - 0xc0000000 (1024 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x80a00000 (10208 kB)
.init : 0x80d00000 - 0x80e00000 (1024 kB)
.data : 0x80e00000 - 0x80e80660 ( 514 kB)
.bss : 0x80e82000 - 0x80ef3180 ( 453 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 errata 752271 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every
715827882841ns
[ 0.000023] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 637086815595 ns
[ 0.001779] Console: colour dummy device 80x30
[ 0.001802] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6.00 BogoMIPS (lpj=30000)
[ 0.001816] pid_max: default: 32768 minimum: 301
[ 0.001956] Security Framework initialized
[ 0.001965] Yama: becoming mindful.
[ 0.002028] AppArmor: AppArmor initialized
[ 0.002086] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002107] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002767] CPU: Testing write buffer coherency: ok
[ 0.002795] CPU0: Spectre v2: using BPIALL workaround
[ 0.003221] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.039603] Setting up static identity map for 0x10100000 - 0x10100060
[ 0.059533] Hierarchical SRCU implementation.
[ 0.099535] smp: Bringing up secondary CPUs ...
[ 0.169806] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.169813] CPU1: Spectre v2: using BPIALL workaround
[ 0.239789] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.239797] CPU2: Spectre v2: using BPIALL workaround
[ 0.309792] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.309800] CPU3: Spectre v2: using BPIALL workaround
[ 0.309933] smp: Brought up 1 node, 4 CPUs
[ 0.309943] SMP: Total of 4 processors activated (24.00 BogoMIPS).
[ 0.309949] CPU: All CPU(s) started in SVC mode.
[ 0.310919] devtmpfs: initialized
[ 0.322237] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9
rev 4
[ 0.322509] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604462750000 ns
[ 0.322527] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.340406] pinctrl core: initialized pinctrl subsystem
[ 0.341465] NET: Registered protocol family 16
[ 0.369631] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.370586] cpuidle: using governor menu
[ 0.370942] CPU identified as i.MX6Q, silicon rev 1.2
[ 0.381216] vdd1p1: supplied by regulator-dummy
[ 0.381810] vdd3p0: supplied by regulator-dummy
[ 0.382321] vdd2p5: supplied by regulator-dummy
[ 0.382870] vddarm: supplied by regulator-dummy
[ 0.383409] vddpu: supplied by regulator-dummy
[ 0.383981] vddsoc: supplied by regulator-dummy
[ 0.398263] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint
registers.
[ 0.398271] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.399469] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.402015] imx rpmsg driver is registered.
[ 0.427635] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 28, base_baud =
5000000) is a IMX
[ 0.428499] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud =
5000000) is a IMX
[ 0.428544] console [ttymxc1] enabled
[ 0.429951] SCSI subsystem initialized
[ 0.430197] libata version 3.00 loaded.
[ 0.430415] usbcore: registered new interface driver usbfs
[ 0.430467] usbcore: registered new interface driver hub
[ 0.430559] usbcore: registered new device driver usb
[ 0.430795] usb_phy_generic 2000000.aips-bus:usbphy_nop1: 2000000.aips-
bus:usbphy_nop1 supply vcc not found, using dummy regulator
[ 0.430996] usb_phy_generic 2000000.aips-bus:usbphy_nop2: 2000000.aips-
bus:usbphy_nop2 supply vcc not found, using dummy regulator
[ 0.431801] imx-i2c 21a0000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.432175] i2c i2c-0: IMX I2C adapter registered
[ 0.432190] i2c i2c-0: can't use DMA, using PIO instead.
[ 0.432562] imx-i2c 21a4000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.433244] i2c i2c-1: IMX I2C adapter registered
[ 0.433259] i2c i2c-1: can't use DMA, using PIO instead.
[ 0.433680] imx-i2c 21a8000.i2c: stop-delay=0, inter-byte-delay=0
[ 0.434800] i2c i2c-2: IMX I2C adapter registered
[ 0.434815] i2c i2c-2: can't use DMA, using PIO instead.
[ 0.435309] Linux video capture interface: v2.00
[ 0.435377] pps_core: LinuxPPS API ver. 1 registered
[ 0.435383] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ 0.435408] PTP clock support registered
[ 0.459545] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5),
5F(6,7)
[ 0.489536] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5),
5F(6,7)
[ 0.490797] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver
probed
[ 0.491707] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
[ 0.491718] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is
0x3130302a
[ 0.491841] MIPI CSI2 driver module loaded
[ 0.492175] Advanced Linux Sound Architecture Driver Initialized.
[ 0.493304] Bluetooth: Core ver 2.22
[ 0.493346] NET: Registered protocol family 31
[ 0.493353] Bluetooth: HCI device and connection manager initialized
[ 0.493368] Bluetooth: HCI socket layer initialized
[ 0.493378] Bluetooth: L2CAP socket layer initialized
[ 0.493416] Bluetooth: SCO socket layer initialized
[ 0.493435] NetLabel: Initializing
[ 0.493442] NetLabel: domain hash size = 128
[ 0.493448] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.493519] NetLabel: unlabeled traffic allowed by default
[ 0.494221] clocksource: Switched to clocksource mxc_timer1
[ 0.494405] VFS: Disk quotas dquot_6.6.0
[ 0.494494] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.495115] AppArmor: AppArmor Filesystem Enabled
[ 0.504883] NET: Registered protocol family 2
[ 0.505520] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.505603] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.505746] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.505959] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.506003] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.506219] NET: Registered protocol family 1
[ 0.506767] RPC: Registered named UNIX socket transport module.
[ 0.506774] RPC: Registered udp transport module.
[ 0.506780] RPC: Registered tcp transport module.
[ 0.506785] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.506798] PCI: CLS 0 bytes, default 64
[ 0.507048] Trying to unpack rootfs image as initramfs...
[ 0.864188] Freeing initrd memory: 5504K
[ 0.865035] hw perfevents: no interrupt-affinity property for /soc/pmu,
guessing.
[ 0.865399] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters
available
[ 0.867897] Bus freq driver module loaded
[ 0.868871] audit: initializing netlink subsys (disabled)
[ 0.869184] audit: type=2000 audit(0.860:1): state=initialized audit_enabled=0
res=1
[ 0.869578] Key type blacklist registered
[ 0.869797] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.874847] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.875960] NFS: Registering the id_resolver key type
[ 0.875992] Key type id_resolver registered
[ 0.875998] Key type id_legacy registered
[ 0.876243] fuse init (API version 7.26)
[ 0.884882] io scheduler noop registered
[ 0.884893] io scheduler deadline registered
[ 0.885066] io scheduler cfq registered (default)
[ 0.885076] io scheduler mq-deadline registered
[ 0.885084] io scheduler kyber registered
[ 0.887420] imx6q-pcie 1ffc000.pcie: no reserved region node.
[ 0.887474] imx6q-pcie 1ffc000.pcie: 1ffc000.pcie supply epdev_on not found,
using dummy regulator
[ 0.887844] OF: PCI: host bridge /soc/pcie@1ffc000 ranges:
[ 0.887883] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000
[ 0.887903] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000
[ 1.096904] imx6q-pcie 1ffc000.pcie: phy link never came up
[ 1.104257] imx6q-pcie 1ffc000.pcie: failed to initialize host
[ 1.108795] imx6q-pcie 1ffc000.pcie: unable to add pcie port.
[ 1.113471] imx6q-pcie: probe of 1ffc000.pcie failed with error -110
[ 1.116974] ldb 2000000.aips-bus:ldb: failed to find valid LVDS channel
[ 1.122318] ldb: probe of 2000000.aips-bus:ldb failed with error -22
[ 1.123140] mxc_hdmi 20e0000.hdmi_video: 20e0000.hdmi_video supply HDMI not
found, using dummy regulator
[ 1.124146] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller
0x13:0xa:0xa0:0xc1
[ 1.124174] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[ 1.124343] mxc_sdc_fb fb@2: registered mxc display driver hdmi
[ 1.170844] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 1.170999] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 1.194267] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 1.194278] find_field: [0] = 0x7ff, max=23
[ 1.194285] find_field: [1] = 0xfff, max=23
[ 1.194292] find_field: [2] = 0x17ff, max=23
[ 1.194298] find_field: [0] = 0x820, max=29
[ 1.194344] imx-ipuv3 2800000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5),
5F(6,7)
[ 1.227781] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 1.227912] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 1.254264] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 1.295477] Console: switching to colour frame buffer device 240x67
[ 1.342832] add tfp410 i2c driver
[ 1.344677] imx-sdma 20ec000.sdma: no iram assigned, using external mem
[ 1.345544] imx-sdma 20ec000.sdma: loaded firmware 3.5
[ 1.349253] mxs-dma 110000.dma-apbh: initialized
[ 1.351338] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to
20dc000.gpc
[ 1.351666] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to
20dc000.gpc
[ 1.355203] imx sema4 driver is registered.
[ 1.356341] spi_imx 2008000.ecspi: probed
[ 1.357483] [drm] Initialized vivante 1.0.0 20120216 for platform:Vivante GCCore
on minor 0
[ 1.357492] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[ 1.368362] brd: module loaded
[ 1.382216] loop: module loaded
[ 1.382381] [max77823_init] start
[ 1.384058] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using
00000024
[ 1.384071] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using
00000480
[ 1.384081] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using
00002000
[ 1.384090] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using
05000000
[ 1.388549] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 1.388607] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1
impl platform mode
[ 1.388622] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio
slum part ccc apst
[ 1.390512] scsi host0: ahci-imx
[ 1.390807] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100
irq 82
[ 1.393294] m25p80 spi0.0: sst25vf016b (2048 Kbytes)
[ 1.393361] 3 ofpart partitions found on MTD device spi0.0
[ 1.393367] Creating 3 MTD partitions on "spi0.0":
[ 1.393381] 0x000000000000-0x0000000c0000 : "U-Boot"
[ 1.394662] 0x0000000c0000-0x0000000c2000 : "env"
[ 1.395682] random: fast init done
[ 1.395780] 0x0000000c2000-0x000000200000 : "splash"
[ 1.397352] libphy: Fixed MDIO Bus: probed
[ 1.398023] CAN device driver interface
[ 1.398460] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver not found,
using dummy regulator
[ 1.399257] flexcan 2090000.flexcan: device registered (reg_base=c0b0c000,
irq=36)
[ 1.400883] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using
dummy regulator
[ 1.401336] pps pps0: new PPS source ptp0
[ 1.403023] libphy: fec_enet_mii_bus: probed
[ 1.403036] mdio_bus 2188000.ethernet-1:
/soc/aips-bus@02100000/ethernet@02188000/mdio/ethernet-phy has invalid PHY address
[ 1.404870] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 1.405011] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 1.422209] fec 2188000.ethernet eth0: registered PHC device 0
[ 1.422631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.422658] ehci-pci: EHCI PCI platform driver
[ 1.422774] usbcore: registered new interface driver cdc_acm
[ 1.422778] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN
adapters
[ 1.422839] usbcore: registered new interface driver usb-storage
[ 1.422951] usbcore: registered new interface driver usbserial
[ 1.422990] usbcore: registered new interface driver usbserial_generic
[ 1.423026] usbserial: USB Serial support registered for generic
[ 1.423061] usbcore: registered new interface driver cp210x
[ 1.423091] usbserial: USB Serial support registered for cp210x
[ 1.423126] usbcore: registered new interface driver ftdi_sio
[ 1.423156] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.423193] usbcore: registered new interface driver keyspan
[ 1.423223] usbserial: USB Serial support registered for Keyspan - (without
firmware)
[ 1.423263] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 1.423295] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 1.423327] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 1.423365] usbcore: registered new interface driver pl2303
[ 1.423395] usbserial: USB Serial support registered for pl2303
[ 1.423431] usbcore: registered new interface driver qcserial
[ 1.423461] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.425245] usbmisc_imx 2184800.usbmisc: 2184800.usbmisc supply vbus-wakeup not
found, using dummy regulator
[ 1.426433] setup_reset_gpios:-2, flags 0
[ 1.432484] setup_reset_gpios:204, flags 1
[ 1.434267] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 1.454257] setup_reset_gpios:-2, flags 1
[ 1.457669] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.457702] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[ 1.468231] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 1.468379] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 1.484261] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.485210] hub 1-0:1.0: USB hub found
[ 1.485268] hub 1-0:1.0: 1 port detected
[ 1.487442] i2c /dev entries driver
[ 1.488163] IR NEC protocol handler initialized
[ 1.488168] IR RC5(x/sz) protocol handler initialized
[ 1.488172] IR RC6 protocol handler initialized
[ 1.488176] IR JVC protocol handler initialized
[ 1.488179] IR Sony protocol handler initialized
[ 1.488183] IR SANYO protocol handler initialized
[ 1.488187] IR Sharp protocol handler initialized
[ 1.488190] IR MCE Keyboard/mouse protocol handler initialized
[ 1.488194] IR XMP protocol handler initialized
[ 1.488825] mxc_v4l2_output v4l2-out: V4L2 device registered as video16
[ 1.488977] mxc_v4l2_output v4l2-out: V4L2 device registered as video17
[ 1.490061] check_alarm_past: alarm in the past
[ 1.490241] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
20cc000.snvs:snvs-rtc-lp as rtc0
[ 1.492240] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[ 1.492821] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-
[email protected]
[ 1.493647] sdhci: Secure Digital Host Controller Interface driver
[ 1.493651] sdhci: Copyright(c) Pierre Ossman
[ 1.493655] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.494894] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO
[ 1.494925] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO
[ 1.495298] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 1.584460] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[ 1.585169] sdhci-esdhc-imx 219c000.usdhc: Got CD GPIO
[ 1.599775] mxc_sdc_fb fb@2: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33
pixclock=25175000 Hz
[ 1.599921] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 1.624253] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=25175000 25142857
parent=264000000 div=10
[ 1.644423] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
[ 1.646010] mxc_vpu 2040000.vpu_fsl: VPU initialized
[ 1.647986] caam 2100000.caam: ERA source: CAAMVID.
[ 1.648047] caam 2100000.caam: AXI pipeline throttling enabled.
[ 1.649248] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
[ 1.649259] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
[ 1.656146] caam_jr 2101000.jr0: Entropy delay = 3200
[ 1.701882] mmc1: host does not support reading read-only switch, assuming
write-enable
[ 1.707921] mmc1: new high speed SDHC card at address 59b4
[ 1.709279] mmcblk1: mmc1:59b4 USDU1 15.0 GiB
[ 1.711167] mmcblk1: p1
[ 1.715887] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.715938] ahci-imx 2200000.sata: no device found, disabling link.
[ 1.715945] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
[ 1.716951] caam_jr 2101000.jr0: Instantiated RNG4 SH0.
[ 1.777707] caam_jr 2101000.jr0: Instantiated RNG4 SH1.
[ 1.778766] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 1.778920] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 1.787213] caam algorithms registered in /proc/crypto
[ 1.791587] caam_jr 2101000.jr0: registering rng-caam
[ 1.792784] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.792940] usbcore: registered new interface driver usbhid
[ 1.792944] usbhid: USB HID core driver
[ 1.796254] sgtl5000 0-000a: sgtl5000 revision 0x11
[ 1.798820] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1
[ 1.804272] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 1.838004] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 1.838505] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW
[ 1.851442] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
[ 1.852599] imx-sgtl5000 sound: ASoC: Cannot get gpio at index 0: -2
[ 1.852943] NET: Registered protocol family 26
[ 1.853512] NET: Registered protocol family 10
[ 1.854604] Segment Routing with IPv6
[ 1.854680] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.855287] NET: Registered protocol family 17
[ 1.855303] can: controller area network core (rev 20170425 abi 9)
[ 1.855414] NET: Registered protocol family 29
[ 1.855451] can: raw protocol (rev 20170425)
[ 1.855456] can: broadcast manager protocol (rev 20170425 t)
[ 1.855467] can: netlink gateway (rev 20170425) max_hops=1
[ 1.855735] Bluetooth: RFCOMM TTY layer initialized
[ 1.855751] Bluetooth: RFCOMM socket layer initialized
[ 1.855780] Bluetooth: RFCOMM ver 1.11
[ 1.855796] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.855800] Bluetooth: BNEP filters: protocol multicast
[ 1.855812] Bluetooth: BNEP socket layer initialized
[ 1.855867] 8021q: 802.1Q VLAN Support v1.8
[ 1.856254] Key type dns_resolver registered
[ 1.858333] Registering SWP/SWPB emulation handler
[ 1.864788] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.878839] imx_thermal 2000000.aips-bus:tempmon: Automotive CPU temperature
grade - max:125C critical:120C passive:115C
[ 1.879417] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-
01 00:00:00 UTC (0)
[ 1.880258] usb_otg_vbus: disabling
[ 1.880264] ALSA device list:
[ 1.880269] #0: sgtl5000-audio
[ 1.894270] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 1.991973] Freeing unused kernel memory: 1024K
[ 2.105754] hub 1-1:1.0: USB hub found
[ 2.105955] hub 1-1:1.0: 3 ports detected
[ 3.014301] usb 1-1.2: new low-speed USB device number 3 using ci_hdrc
[ 3.177072] input: ELMCU iPazzPort as
/devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.2/1-
1.2:1.0/0003:0C40:8000.0001/input/input1
[ 3.221485] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode.
Opts: (null)
[ 3.245376] hid-generic 0003:0C40:8000.0001: input,hidraw0: USB HID v1.11
Keyboard [ELMCU iPazzPort] on usb-ci_hdrc.1-1.2/input0
[ 3.253118] input: ELMCU iPazzPort as
/devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.2/1-
1.2:1.1/0003:0C40:8000.0002/input/input2
[ 3.314678] hid-generic 0003:0C40:8000.0002: input,hidraw1: USB HID v1.11 Mouse
[ELMCU iPazzPort] on usb-ci_hdrc.1-1.2/input1
[ 4.053602] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.091024] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL
+XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-
hierarchy=hybrid)
[ 4.092295] systemd[1]: Detected architecture arm.
[ 4.156078] systemd[1]: Set hostname to <bionic-xfce>.
[ 4.386700] systemd[1]: File /lib/systemd/system/systemd-journald.service:36
configures an IP firewall (IPAddressDeny=any), but the local system does not
support BPF/cgroup based firewalling.
[ 4.386719] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning
is only shown for the first loaded unit using IP firewalling.)
[ 4.618185] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.618864] systemd[1]: Set up automount Arbitrary Executable File Formats File
System Automount Point.
[ 4.654479] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.654547] systemd[1]: Reached target User and Group Name Lookups.
[ 4.684429] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.685611] systemd[1]: Created slice System Slice.
[ 4.715444] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.745726] systemd[1]: Listening on Journal Audit Socket.
[ 5.415628] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[ 6.329083] systemd-journald[281]: Received request to flush runtime journal
from PID 1
[ 6.576186] input: gpio-keys as /devices/soc0/gpio-keys/input/input3
[ 6.611134] galcore: loading out-of-tree module taints kernel.
[ 6.639794] Galcore version 6.2.4.190076
[ 6.933047] tc358743_mipi 1-000f: no sensor pwdn pin available
[ 6.933126] get_pixelformat: YUV 4:2:2 8-bit (56595559, 1e)
[ 6.933136] tc358743_probe: format: 56595559, capture mode: 0 fps: 60 width: 640
height: 480
[ 6.933458] tc358743_mipi 1-000f: 1-000f supply DGPO not found, using dummy
regulator
[ 6.933698] power_control: 1
[ 6.933709] tc_standby: powerdown=0, power_gp=0xfffffffe
[ 7.014774] Goodix-TS 2-0014: i2c test failed attempt 1: -6
[ 7.054808] Goodix-TS 2-0014: i2c test failed attempt 2: -6
[ 7.059260] tc358743_read_reg:reg=0 ret=-6
[ 7.062087] tc358743_probe:cannot find camera
[ 7.065870] power_control: 0
[ 7.065883] tc_standby: powerdown=1, power_gp=0xfffffffe
[ 7.094398] tc358743_probe: failed, error=-19
[ 7.094426] Goodix-TS 2-0014: I2C communication failure: -6
[ 7.216338] Goodix-TS 2-005d: i2c test failed attempt 1: -6
[ 7.254786] Goodix-TS 2-005d: i2c test failed attempt 2: -6
[ 7.294306] Goodix-TS 2-005d: I2C communication failure: -6
[ 7.299248] egalax_ts 2-0004: Failed to switch to I2C interface
[ 7.304506] ft5x06-ts 2-0038: reset fffffffe
[ 7.304941] ft5x06-ts 2-0038: Could not detect touch screen -19.
[ 7.318965] ili210x_i2c 2-0041: No platform data!
[ 7.319338] ili210x_i2c 2-0041: i2c transfer failed
[ 7.323032] ili210x_i2c 2-0041: Failed to get firmware version, err: -5
[ 7.328535] ili210x_i2c: probe of 2-0041 failed with error -5
[ 7.329080] ov5640 2-003c: no sensor pwdn pin available
[ 7.334006] adv7180 2-0020: adv7180_get_gpios: pwn-gpios flags(1 -> 0)
[ 7.334070] adv7180 2-0020: adv7180_get_gpios: rst-gpios flags(1 -> 0)
[ 7.354334] adv7180_gpio_state: active=0, rst-gpios(78)=0x1
[ 7.384914] adv7180_probe: cea861=0
[ 7.384969] adv7180_gpio_state: active=0, pwn-gpios(77)=0x1
[ 7.414464] adv7180 2-0020: get mclk failed
[ 7.415125] adv7180 2-0020: adv7180_read:read reg error: reg=11 ret=-6
[ 7.421687] tsc2004 2-0048: 2-0048 supply vio not found, using dummy regulator
[ 7.422122] tsc2004 2-0048: tsc2004_cmd: failed, command: 1 i2c error: -6
[ 7.428482] tsc2004 2-0048: Device not present: -6
[ 7.572473] imx-audio-hdmi sound-hdmi: ASoC: CPU DAI soc:hdmi_audio@00120000 not
registered
[ 7.591853] imx-audio-hdmi sound-hdmi: failed to register card: -517
[ 7.903159] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 7.905145] mxc_v4l_open: Mxc Camera no sensor ipu1/csi0
[ 7.913098] mxc_v4l_open: Mxc Camera no sensor ipu1/csi1
[ 7.925500] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 7.934337] imx-audio-hdmi sound-hdmi: ASoC: CPU DAI soc:hdmi_audio@00120000 not
registered
[ 7.941408] imx-audio-hdmi sound-hdmi: failed to register card: -517
[ 7.948017] imx-audio-hdmi sound-hdmi: ASoC: CODEC DAI i2s-hifi not registered
[ 7.953949] imx-audio-hdmi sound-hdmi: failed to register card: -517
[ 7.963399] imx-audio-hdmi sound-hdmi: ASoC: CODEC DAI i2s-hifi not registered
[ 7.971718] imx-audio-hdmi sound-hdmi: failed to register card: -517
[ 8.265183] imx-audio-hdmi sound-hdmi: i2s-hifi <-> soc:hdmi_audio@00120000
mapping ok
[ 8.384733] ov5640_mipi 1-003e: Failed to update i2c addr to 0x3e (-6)
[ 8.391613] ov5640_mipi 1-003e: ov5640_read_reg(mipi): reg=300a ret=-6
[ 8.397201] ov5640_mipi 1-003e: Camera ov5640_mipi is not found
[ 8.527086] update_device_addr: ov5642 ret=-6
[ 8.554632] ov5642_read_reg:write reg error:reg=300a
[ 8.554637] camera ov5642 is not found(-1) 21
[ 12.547519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.645208] Micrel KSZ9021 Gigabit PHY 2188000.ethernet-1:06: attached PHY
driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:06,
irq=113)
[ 12.645460] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.320923] random: crng init done
[ 13.320935] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.688263] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 13.688405] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 13.714259] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 14.223889] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 14.224021] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 14.244264] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 15.936160] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 15.936449] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 15.964335] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 16.081639] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 16.081759] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 16.104261] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 16.264452] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 16.264736] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 16.294338] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 18.872830] mxc_sdc_fb fb@2: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36
pixclock=148500000 Hz
[ 18.872965] imx-ipuv3 2800000.ipu: try ipu internal clk
[ 18.894247] imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000
parent=148500000 div=1
[ 20.282375] imx-hdmi-audio imx-hdmi-audio: failed to prepare slave dma
[ 26.845037] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 26.849492] mxc_v4l_open: Mxc Camera no sensor ipu1/csi0
[ 26.853933] mxc_v4l_open: Mxc Camera no sensor ipu1/csi1
[ 26.858477] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 129.991742] imx-hdmi-audio imx-hdmi-audio: failed to prepare slave dma
[ 395.182439] imx-hdmi-audio imx-hdmi-audio: failed to prepare slave dma
[ 709.700034] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 763.136033] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 792.555120] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 792.559441] mxc_v4l_open: Mxc Camera no sensor ipu1/csi0
[ 792.563739] mxc_v4l_open: Mxc Camera no sensor ipu1/csi1
[ 792.568177] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
[ 1098.839143] imx-hdmi-audio imx-hdmi-audio: failed to prepare slave dma
[ 1136.051772] imx-hdmi-audio imx-hdmi-audio: failed to prepare slave dma
[ 1238.556753] imx-hdmi-audio imx-hdmi-audio: failed to prepare slave dma