SYNOPSIS
This project work titled “HYDRAULIC JACK FOR CARS” has been conceived having studied the difficulty in
lifting the any type of light vehicles.
Our survey in the regard in several automobile garages, revealed the facts that mostly some difficult
methods were adopted in lifting the vehicles for reconditioning.
Now the project has mainly concentrated on this difficulty, and hence a suitable device has been designed.
Such that the vehicle can be lifted from the floor land without application of any impact force.
The fabrication part of it has been considered with almost case for its simplicity and economy, such that
this can be accommodated as one of the essential tools on automobile garages.
The subsequent chapters indicate all the essential features of its fabrication, application and its cost
analysis.
ADVANTAGES AND DISADVANTAGES
ADVANTAGES
1. The moving parts of this system are cooled by the oil itself used. Thus this project does not require
any cooling arrangements.
2. The loaded light vehicles can be easily.
3. Checking and cleaning are easy, because of the main parts are screwed.
4. Handling is easy
5. No Manual power
6. Easy to Repair.
7. Replacement of parts are easy
DISADVANTAGES
Cost of the equipment is high when compared to ordinary hand jack.
This system requires high maintenances care when compared to ordinary hand jack.
Care must be taken for the handling the equipment such as proper wiring connection, oil level
checkup, etc.
