School of Computer Science and Engineering

(Computer Science & Engineering)

Faculty of Engineering & Technology
Jain Global Campus, Kanakapura Taluk - 562112
Ramanagara District, Karnataka, India

2023-2024
( VIII Semester)

A Project Report on

“TITLE ”
Submitted in partial fulfilment for the award of the degree of

BACHELOR OF TECHNOLOGY
IN
CO M P UT E R S CI E NC E AN D E NG I NEE RI NG

Submitted by

NAME1, NAME 2, NAME 3

USN1, USN2, USN3

Under the guidance of

Mr. Guide name

Assistant/Associate Professor
Department of Computer Science and Engineering
School of Computer Science & Engineering
Faculty of Engineering & Technology
JAIN (Deemed to-be University)
 Department of Computer Science and Engineering
School of Computer Science & Engineering
Faculty of Engineering & Technology
Jain Global Campus, Kanakapura Taluk - 562112
Ramanagara District, Karnataka, India

CERTIFICATE

This is to certify that the project work titled “TITLE” is carried out by Name1 (USN), Name2
(USN), Name3 (USN), a bonafide student(s) of Bachelor / Master of Technology at the School
of Engineering & Technology, Faculty of Engineering & Technology, JAIN (Deemed-to-be
University), Bangalore in partial fulfillment for the award of degree in Bachelor / Master of
Technology in Computer Science and Engineering, during the year 2023-2024.

Dr. Guide Dr. Program Head , Dr. Geetha G

Asst/Asso/ Professor Program Head, Director,
Dept. of CS&E, Computer Science and School of Computer Science
Engineering, & Engineering
Date: School of Computer Science & Faculty of Engineering &
Engineering Technology
Faculty of Engineering & JAIN (Deemed to-be
Technology University)
JAIN (Deemed to-be University) Date:
Date:

Name of the Examiner Signature of Examiner

1.

2.
<

DECLARATION

I/We , Name1 (USN), Name2 (USN), Name3 (USN) student of ? semester B.Tech/
M.Tech in Computer Science and Engineering, at School of Engineering &
Technology, Faculty of Engineering & Technology, JAIN (Deemed to-
be University), hereby declare that the internship work titled “Title” has been carried out
by us and submitted in partial fulfilment for the award of degree in Bachelor /Master of
Technology in Computer Science and Engineering during the academic year
2023-2024. Further, the matter presented in the work has not been submitted previously
by anybody for the award of any degree or any diploma to any other University, to the best
of our knowledge and faith.

Name1: Signature
USN :
Name2: Signature
USN :
Name3: Signature
USN :

Place : Bangalore
Date :
 ACKNOWLEDGEMENT

It is a great pleasure for me to acknowledge the assistance and support of a large

number of individuals who have been responsible for the successful completion of this project
work.
First, I take this opportunity to express my sincere gratitude to Faculty of Engineering
& Technology, JAIN (Deemed to-be University) for providing me with a great opportunity to
pursue my Bachelors / Master’s Degree in this institution.
I am deeply thankful to several individuals whose invaluable contributions have made
this project a reality. I wish to extend my heartfelt gratitude to Dr. Chandraj Roy Chand,
Chancellor, for his tireless commitment to fostering excellence in teaching and research at
Jain (Deemed-to-be-University). I am also profoundly grateful to the honorable Vice
Chancellor, Dr. Raj Singh, and Dr. Dinesh Nilkant, Pro Vice Chancellor, for their
unwavering support. Furthermore, I would like to express my sincere thanks to Dr. Jitendra
Kumar Mishra, Registrar, whose guidance has imparted invaluable qualities and skills that
will serve us well in our future endeavors.
I extend my sincere gratitude to Dr. Hariprasad S A, Director of the Faculty of
Engineering & Technology, and Dr. Geetha G, Director of the School of Computer Science
& Engineering within the Faculty of Engineering & Technology, for their constant
encouragement and expert advice. Additionally, I would like to express my appreciation to
Dr. Krishnan Batri, Deputy Director (Course and Delivery), and Dr. V. Vivek, Deputy
Director (Students & Industry Relations), for their invaluable contributions and support
throughout this project.
It is a matter of immense pleasure to express my sincere thanks to Dr. Program head,
Program Head, Computer Science and Engineering, School of Computer Science &
Engineering Faculty of Engineering & Technology for providing right academic guidance
that made my task possible.
I would like to thank our guide …………………….., Associate / Assistant Professor,
Dept. of Computer Science and Engineering, for sparing his/her valuable time to extend
help in every step of my work, which paved the way for smooth progress and fruitful
culmination of the project.
I would like to thank our Project Coordinator Dr. Project Coordinator, and all the
staff members of Computer Science and Engineering for their support.
 I am also grateful to my family and friends who provided me with every requirement
throughout the course.
Feel free to add any additional members that you want to acknowledge other than
above.
I would like to thank one and all who directly or indirectly helped me in completing
the work successfully.

Signature of Student(s)
i
 ABSTRACT

This page will contain a concise and brief summary of the project. The entire abstract should
be covered in one page.

ii
 The Table of Contents can be defined or prescribed by a
guide that suits the content of Chapter 1, ensuring its
appropriateness
TABLE OF CONTENTS
List of Figures v
List of Tables vi
Nomenclature used vii
Chapter 1 01
1. INTRODUCTION
1.1 Background & Motivation
1.2 Objective
1.3 Delimitation of research
1.4 Benefits of research

Chapter 2
2. LITERATURE SURVEY
2.1 Literature Review
2.2 Inferences Drawn from Literature Review
Chapter 3
3. PROBLEM FORMULATION AND PROPOSED WORK
3.1 Introduction

3.2 Problem Statement

3.3 System Architecture /Model

3.4 Proposed Algorithms

3.5 Proposed Work

4. IMPLEMENTATION 08
4.1 Hardware Design and Implementation 08
4.1.1 09
4.1.2 10
4.1.3 11

iii
 4.1.4 11
4.1.5 11
4.2 Software algorithm 11

Chapter 5 39

5. RESULTS AND DISCUSSION 39

CONCLUSIONS AND FUTURE SCOPE 43

REFERENCES (IEEE FORMAT ) xi

APPENDICES xiv
APPENDIX – I xv
APPENDIX – II xvi
DETAILS OF PAPER PUBLICATION(ALONG WITH PAPER) x
INFORMATION REGARDING STUDENT xvii
PHOTOGRAPH ALONG WITH GUIDE Xviii
PLAGIARISM REPORT (SHOULD BE TAKEN FROM LIBRARY AND IT SHOULD BE LESS THAN
20% THE COMPLETE REPORT – EXCLUDING REFENCES)

iv
 LIST OF FIGURES

Fig. No. Description of the figure Page No.

3.1 Proposed Block Diagram 5
4.1(a) 7
4.1(b) 8
4.2(a) 12
4.2(b) 12
4.2(c) 13
4.3 13
4.4(a) 15
4.5 19
4.6 20
4.7 21
4.8 23
5.3(a) 25
5.3(b) 25
6.1(a) 26
6.1(b) 26
6.1(c) 27
6.1(d) 27
6.1(e) 27
6.2(a) 28
6.2(b) 28
6.2(c) 28
6.2(d) 29
6.2(e) 29
6.2(f) 29
6.2(g) 30
6.2(h) 30

v
 6.2(i) 30
6.2(j) 31
LIST OF TABLES

Table No. Description of the Table Page No.

9
22
22
31

vi
 NOMENCLATURE USED

LCD Liquid Crystal Display

GPRS General Packet Radio Service
AT Attention
GUI Graphical User Interface
USB Universal Serial Bus
SIM Subscriber Identification Module
LF Line Feed
CR Carriage Return
PHP Pre-Processor Hyper text
MySQL My Structured Query Language

vii
 <Your Project Title>
Chapter 1 <TNR 18 B>
1. FIRST CHAPTER <TNR 18 B>
This is a sample chapter showing you the formatting styles. As soon as you float
in (paste in) your actual report content, select the whole material, [using
<CTRL>+A], and apply the style the items enclosed in the Red Colored Chevrons
(or Angle Brackets “<”& “>”, represent the Style Names. They should be visible
to you in the Home → Styles Menu. Initially MAIN_PARA (and some other
styles employed here) may not be visible in the Styles gallery, but you can scroll
the gallery up or down, and select the needed styles. Please note: YOU
SHOULD NOT TYPE THESE STYLE NAMES. < TNR 12 line space 1.5, justify
both sides and do not hyphenate>

1.1. About Styles <TNR 16 B>

A style is nothing but a collective group of properties applied to a whole
paragraph of material. This includes the Font styles and its variations, the
various spacing and alignments. The style also covers parameters like Bullets,
Numbering, Indents, Auto-numbering, Borders/Shades, whether the hyphenation
be allowed or disallowed, whether the particular style should start on a separate
page, etc.

1.1.1. Home tab <TNR 14 B>

You can also format text directly by using the other controls on the Home tab.
Most controls offer a choice of using the look from the current theme or using a
format that you specify directly. To change the overall look of your document,
choose new Theme elements on the Page Layout tab.

1.1.1.1. Selected Text <TNR 12 B>

From the Quick Styles gallery on the Home tab. You can also format text directly
by using the other controls on the Home tab. Most controls offer a choice of
using the look from the current theme or using a format that you specify directly.
To change the overall look of your document, choose new Theme elements on the
Page Layout tab. To change the looks available in the Quick Style gallery, use
the Change Current Quick Style Set command.
Computer Science and Engineering 1
 <Your Project Title>

Fig. 1.1. A sample figure / illustration. <TNR 12 center justified>

Table 1.1. A sample table. <TNR 12 center justified>

Sl.No. This is a Sample Table

1 ITEM 1 SAMPLE1 SOMETHING

ANOTHER
2 ITEM2 SAMPLE LINE SOMETHING
SPREADING OVER

On the Insert tab, the galleries include items that are designed to coordinate with
the overall look of your document. To change the overall look of your document,
choose new Theme elements on the Page Layout tab. To change the looks
available in the Quick Style gallery, use the Change Current Quick Style Set
command. You can use these galleries to insert tables, headers, footers, lists,
cover pages, and other document building blocks. When you create pictures,
charts, or diagrams, they also coordinate with your current document look .

A sample equation:

Rd
 −k

  (x )
Rl P
X c 2 = Rl  4
+ y 2 .dx  (1.1)
( R
Q +1 − d
2
Rl
) k =0 x =0 Q

Computer Science and Engineering 2

 REFERENCES (IEEE format)

Read: https://ieeeauthorcenter.ieee.org/wp-content/uploads/IEEE-Reference-Guide.pdf

ix
 APPENDIX-I

PHOTOGRAPHS (IF ANY DURING VISIT TO SITES/ PLACES

REGARDING PROJECT )

x
APPENDIX - II
SOURCE CODE

xi
APPENDIX-III
DATASHEETS

xii
 INFORMATION REGARDING STUDENT(S)
STUDENT NAME EMAIL ID PERMANENT PHONE NUMBER LANDLINE PLACEMENT PHOTOGRAPH
ADDRESS NUMBER DETAILS
PHOTOGRAPH ALONG WITH GUIDE