View

View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Grove TMS700E
Product Guide

Features
ř 50 t or 55 t (50 USt or 60 USt) capacity

ř 11 m – 33,5 m (36 ft – 110 ft) four-section, full power

sequenced synchronized boom

ř 10,1 m – 17 m (33 ft – 56 ft) offsettable bi-fold

lattice swingaway extension

ř Optional 6,1 m (20 ft) or 12,2 m (40 ft)

swingaway extension inserts

ř Grove MEGAFORMTM boom

ř Up to 7484 kg (16,500 lb) hydraulically

installed and removed counterweight
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Features

Swingaway extension inserts

Optional 6,1 m (20 ft) or 12,2 m (40 ft) swingaway
extension inserts offer excellent capacities with an
unprecedented tip height of up to 212 ft.

MEGAFORMTM boom
The 11 m – 33,5 m
(36 ft – 110 ft) four-section full power
sequenced synchronized MEGAFORM™
boom is designed for maximum vertical
and lateral strength.
Suspension system
Standard front and rear air ride suspension
provides a comfortable ride at maximum speed
of 105 km/h (65 mph).

Cummins diesel
carrier engine
Cummins ISM 450 diesel carrier
engine delivers the horsepower
and torque needed to negotiate
tough job sites and achieve
highway travel speeds.
View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Contents

Specifications 4

Dimensions 7

Travel proposals 8

Working range 9

Main boom and swingaway charts 10

Working range with inserts 18

Swingaway charts with inserts 19

Load handling 21

Symbols glossary 22
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Specifications
Superstructure
Cab

Boom High visibility, all steel cab with acoustical lining

and tinted safety glass throughout. Deluxe seat with
11 m – 33,5 m (36 ft – 110 ft) four (4) section, full armrest mounted hydraulic single axis controls. Dash
power sequenced synchronized boom. panel incorporates gauges for all engine functions.
Other standard features include: sliding side and rear
Maximum tip height: 35,9 m (118 ft). windows, hot water heat, electric windshield wash/
wipe, circulating air fan, sliding skylight with sunscreen
Folding lattice extension and electric skylight wiper, fire extinguisher, cup
holder, air conditioning.
10,1 m – 17,1 m (33 ft – 56 ft) folding lattice
swingaway extension offsettable at 0°, 25° or 45°. Stows Swing
alongside base boom section.
Maximum tip height: 52,6 m (172.5 ft). Planetary swing with foot applied multi-disc wet brake.
Spring applied, hydraulically released parking brake.
Two position plunger type and 360˚ mechanical house
*Lattice extensions locks operated from cab.
Maximum speed: 2.0 rpm.
Two (2) 6,1 m (20 ft) lattice extensions used with the
swingaway extension to increase the length to 23,2 m
(76 ft) or 29,3 m (96 ft). Counterweight
Maximum tip height: 64,6 m (212 ft).
4990 kg (11,000 lb) consisting of (2) 2495 kg ([2]
5500 lb) sections. *Optional “Heavy Lift” package
Boom nose consisting of (1) additional 2495 kg (5500 lb)
section, for a total of 7484 kg (16,500 lb). Hydraulic
Quick reeving type boom nose with 3 nylatron sheaves installation/removal.
(TMS750E), (4 for TMS760E [60 ton rating]) Hydraulic system
mounted on heavy duty tapered roller bearings with
removable pin-type rope guards. Removable auxiliary
boom nose with removable pin type rope guard. Four main gear pumps with a combined capacity
of 513 L/m (135.4 gpm). Individual pressure
compensated valve banks. Maximum operating
Boom elevation pressure: 27,6 Mpa (4000 psi).
Return line type filter with full flow by-pass protection
One double acting hydraulic cylinder with integral and service indicator. Replaceable cartridge with beta
holding valve provides elevation from -3˚ to 78˚. rating of 5/12/16. 643 L (170 gal) reservoir. Remote
mounted oil cooler with thermostatically controlled
Load moment and anti-two block electric motor driven fan.
system

Standard “Graphics Display” load moment and

anti-two block system with audio-visual warning and
control lever lockout. These systems provide electronic
display of boom angle, boom length, radius, tip height,
relative load moment, maximum permissible load,
load indication and warning of impending two-block
condition. The standard “Work Area Definition
System” allows the operator to pre-select and define
safe working areas. If the crane approaches the pre-set
limits, audio-visual warnings aid the operator in
avoiding job-site obstructions.

4 *Denotes optional equipment

 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Specifications
Superstructure, continued
Outrigger system

Hoist specifications Four hydraulic telescoping, single stage, double box

main and auxiliary hoists-model beam outriggers with inverted jack and integral
HP30A-19G holding valves. Quick release type steel outrigger floats
610 mm (24 in) diameter. Three position setting with
fully extended, intermediate (50%) extended and fully
Planetary reduction with integral automatic brake, retracted capacities.
electronic hoist drum rotation indicator, and hoist
drum cable follower. Grooved drum.
Outrigger controls
Single line pull: 1st layer: 8226 kg (18,134 lb)
3rd layer: 6994 kg (15,420 lb) Located in the superstructure cab and both sides of
5th layer: 6084 kg (13,413 lb) chassis. Level indicator at each control station.

Maximum single line speed: 162 m/min Engine

(531 fpm)
Cummins ISM 450, 10,8 L diesel (On Highway EPA
Certified) six cylinders, after cooled, 336 kW (450
Maximum permissible line pull: 7620 kg (16,800 lb) bhp) at 2000 rpm. Maximum torque 2102 Nm (1550
with standard 6 x 37 ft-lb) at 1200 rpm.
class rope
Fuel requirement — Maximum of 15 ppm sulfur
7620 kg (16,800 lb) content (ultra low sulfur diesel).
with optional 35 x 7
class rope Equipped with engine compression brake, block heater,
cold start aid (less canister) and audio-visual engine
Rope diameter: 19 mm (.75 in) distress system.

Rope length: 152 m (500 ft) *Engine (required for sale outside
North America)
Rope type: 6 x 36 EIPS IWRC
special flexible Cummins QSM 402, 10,8 L diesel (Off Highway EPA
Certified) six cylinders, after cooled 300 kW (402 bhp)
Optional 35 x 7 at 1800 rpm. Maximum torque 1898 Nm (1400 ft lb)
rotation resistant at 1400 rpm.
Fuel requirement — Maximum of 5000 ppm sulfur
Maximum rope stowage: 256 m (841 ft) content.
Carrier Equipped with engine compression brake, block heater,
cold start aid (less canister) and audio-visual engine
distress system.
Chassis
Fuel tank capacity
Triple box section, four-axle carrier, fabricated
from high strength, low alloy steel with towing and
tie-down lugs. 379 L (100 gal).

Transmission

Roadranger 11 speeds forward, 3 reverse.

Grove TMS700E *Denotes optional equipment 5

 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Specifications
Carrier, continued
Cab

Drive One man design, all steel fabricated with acoustical

lining and tinted safety glass throughout. Deluxe
Drive 8 x 4 x 4. fabric covered, fully adjustable air ride seat. Complete
driving controls and engine instrumentation including
tilt telescope steering wheel, tachometer, speedometer,
Steering voltmeter, water temp., oil pressure, fuel level, air
pressure gauge with A/V warning and engine high
Front axles, single circuit, mechanical steering with temp./low oil pressure A/V warning. Other standard
hydraulic assist. items include hot water heater/defroster, electric
windshield wash/wipe, fire extinguisher, seat belt, air
conditioning, air horn and door lock.
Axles
Electrical system
Front: (2) beam-type steering axles, 2,1 m (83.3 in)
track.
Two (2) 12V batteries. 12V lighting/starting. Battery
disconnect standard equipment.
Rear: (2) single reduction drive axles, 1,9 m (75.1 in)
track. Inter-axle differential lock.
Maximum speed
Brakes
104 km/h (65 mph)
S-cam, dual system operating on all wheels. Spring
applied air released parking brake acting on rear axles. Gradeability (theoretical)

Suspension 70%

Front: Walking beam with air bags and shock Miscellaneous standard equipment
absorbers.
Aluminum fenders with rear storage compartments;
Rear: Walking beam with air bags and shock absorbers. dual rear view mirrors; electronic back-up alarm; pump
disconnect; tire inflation kit; air cleaner restriction
indicator; headache ball stowage; chrome package which
Tires includes aluminum wheels, and LMI event recorder.

Front: 445/65R 22.5, tubeless, mounted on aluminum

disc wheels. *Optional equipment

Rear: 315/80R 22.5, tubeless, mounted on aluminum Auxiliary Lighting and Convenience Package —
disc wheels, steel inner. includes amber strobe for superstructure and carrier
cabs, dual boom base mounted floodlights, and
LMI light bar (in cab)
Lights Trailing Boom Package — includes trailer air
and electrical disconnects, no spin differential and
Full lighting package including turn indicators, head, trailing boom kit (less dolly)
tail, brake, and hazard warning lights. Wind speed indicator
Hook blocks
Rear pintle hook
Cross axle differential locks
Winter front radiator cover
Aluminum outrigger pads
Tow cable
LMI calibration for on rubber

6 *Denotes optional equipment

 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Dimensions

!$

"
#%




 

  

$"$




%&
$ 
 !$

"



&
"!! #%




 


& 
  
   "
$

  "!
"

  $!
!!

$$



$"$


%
"$  
$ 




%&



   



&
"!!
$ 

 
& 
  
  
!! "
$

  "!
"

  $!
!!

$$



$!%


 %
"$  
"
& #






 
  



   
 
$ 


!!  
 
 

$!%



"
& #

  




 
 


$


$

 #


 






  



 

 


$


$

 

 #

%!
 
 

% 





  



 

 
 



%!
 


% $


# 


%
!


$#  



%$
# !
 

!
 # 

$
 &

#% 


%
!


$#  





#
 %$
# !
  
 
 #%


#


!
 # 

#

!
 
#  %
#  
 
% 
    &
#
  !


%
! 
 



#
  
# 

$

!
!%$  
 
 #%


#




#

!
 
#  %
#  
  
   
#
  !


%
! 
 

 
# 

$

!
!%$

/
 !
 

, ,++

*.
)(,
 '
// +++

* )
((+
'
 
 /& ,++

*%
)$,
 '
 

 


1 2 3
Counterweight configuration 
 
   

ϣϦϠř
Zero
/& ,++
 // +++
 , ,++

+

2495 kg (5500 lb)


4990 kg (11,000 lb)
--

7485 
!!
kg (16,500 lb) #
,&

!!#
Grove TMS700E %&
 

"
7
*,&

.+

'
(&


"

*,&


)+

'
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Travel proposals
Boom over front

5639 mm
(18.5')
1524 mm 1524 mm
(5') (5')

Unit configuration kg (lb) Gross Front Rear

Basic machine including 33,5 m (110 ft) main boom, 33 634 (74,149) 16 664 (36,738) 16 970 (37,411)
main and auxiliary hoists with cable, driver and no counterweight.
Additions:
2495 (5500) 1004 (-2214) 3499 (7714)
2495 kg (5500 lb) counterweight pinned on superstructure
4990 kg (11,000 lb) counterweight pinned on superstructure 4990 (11,000) 2009 (-4428) 6998 (15,428)
7485 kg (16,500 lb) counterweight pinned on superstructure 7484 (16,500) 3013 (-6642) 10 497 (23,142)
2495 kg (5500 lb) counterweight stowed on carrier deck 2495 (5500) 2128 (4692) 367 (808)
4990 kg (11,000 lb) counterweight stowed on carrier deck 4990 (11,000) 4257 (9384) 733 (1616)
Basic machine including 110 ft (33.5 m) main boom,
Swingaway carrier brackets 150 (330) 128 (282) 22 (48)
main and auxiliary hoists with cable, driver and no counterweight. 74,712 (33 889) 37,097 (16 827) 37,615 (17 062)
10,1 m (33 ft) swingaway 785 (1730) 895 (1972) -110 (-242)
Additions:
10,1 m – 17,1 m (33 ft - 56 ft) swingaway 1125 (2480) 1135 (2502) -10 (-22)
5500 lb (2495 kg) counterweight pinned on superstructure 5500 (2495) -2214 (1004) 7714 (3499)
Auxiliary boom nose 59 (130)
11,000 lb (4990 kg) counterweight pinned on superstructure 11,000 (4990) 114-4428 (251)
(2009) -55
15428 (6998)(-121)
35 t (40 USt)
16,500 hook block
lb (7485 stowed at bumper pinned on superstructure
kg) counterweight 363 16,500 (800)(7484) 557 -6642 (1229)
(3013) -195 (10,497)
23,142 (-429)
45 t (50 USt)
5500 hook kg)
lb (2495 blockcounterweight
stowed at bumperstowed on carrier deck 454 5500(1000)(2495) 6974692 (1536)
(2128) -243
808 (-536)
(367)
55 t (60 USt)
11,000 hook block
lb (4990 stowed at bumper stowed on carrier deck
kg) counterweight 567 11,000(1250)(4990) 8719384 (1920)
(4257) -304
1616 (-670)
(733)
7,5 t (8.3 USt) headache
Swingaway carrierball stowed in trough
brackets 168 330(371) (150) 240282 (530)
(128) 48-72 (-159)
(22)
Air
33conditioning
ft. (10.1 m)superstructure
swingawaycab 129 1730(285) (785) 5 1972 (10)
(895) 125
-242 (275)
(-110)
33conditioning
Air - 56 ft. (10.1chassis
- 17.1 m)
cab swingaway 40 2480(88) (1125) 522502 (1135)
(115) -22
-12 (-10)
(-27)
Auxiliary boom nose 130 (59) 251 (114) -121 (-55)
40 ton (35
Boom mt)front
over hookblock stowed in trough 800 (363) 1142 (518) -342 (-155)
50 ton (45 mt) hookblock stowed in trough 1000 (454) 1428 (648) -428 (-194)
60 ton (55 mt) hookblock stowed in trough 17 556 mm 1250 (567) 1785 (810) -535 (-243)
8.3 ton (7.5 mt) headache ball stowed in trough (57.6') 371 (168) 530 (240) -159 (-72)
Air conditioning superstructure cab 285 (129) 10 (5) 275 (125)
Air conditioning chassis cab 88 (40) 115 (52) -27 (-12)

5639 mm
(18.5')
1524 mm 1524 mm 1372 mm
(5') (5') 3962 mm (4.5')
(13')

Unit configuration kg (lb) Gross Front Rear Dolly

Basic machine including 33,5 m (110 ft) main boom, main
and auxiliary hoists with cable, driver, no counterweight and 36 357 (80,152) 15 020 (33,113) 13 173 (29,041) 8164 (17,998)
2722 kg (6000 lb) tandem axle dolly.
Additions:
2495 (5500) 2128 (4692) 367 (808) 0 (0)
2495 kg (5500 lb) counterweight stowed on carrier deck.
4990 kg (11,000 lb) counterweight stowed on carrier deck. 4990 (11,000) 4257 (9384) 733 (1616) 0 (0)
10,1 m (33Basic machine including
ft) swingaway 110 ft. (33.5 m) main boom, main
with brackets. 934 (2060) 107 (236) 91 (201) 936 (1623)
10,1 m – and
17,1 mauxiliary
(33 ft – 56hoists with cable,
ft) swingaway withdriver, no counterweight and 1275
brackets. (2810) 194 (427) 165 (363) 916 (2020)
Auxiliary 6,000
boomlb (2,722 kg) tandem axle dolly.
nose. 5980,737 (130)
(36,622) 33,479
-11 (15,186)
(-24) 29,275
-9 (13,,279)
(-20)17,983 (8,157)
79 (174)
35 t (40 Additions:
USt) hook block hanging at boom nose. 363 (800) -57 (-126) -49 (-107) 469 (1033)
5,500 lb (2,495 kg) counterweight stowed on carrier deck. 5,500 (2,495) 4,692 (2,128) 808 (367) 0 (0)
45 t (50 USt) hook block hanging at boom nose. 454 (1000) -71 (-157) -61 (-134) 586 (1291)
11,000 lb (4,990 kg) counterweight stowed on carrier deck. 11,000 (4,990) 9,384 (4,257) 1,616 (733) 0 (0)
55 t (60 USt) hook block hanging at boom nose. 567 (1250) -89 (-197) -76 (-167) 732 (1614)
33 ft (10.1 m) swingaway with brackets. 2,060 (934) 281 (128) 239 (108) 1,540 (699)
7,5 t (8.333
USt)
- 56headache ball m)
ft (10.1 - 17.1 hanging at boomwith
swingaway nose.
brackets. 168 2,810 (371)
(1,275) -26
384 (-58)
(174) 326-23 (148)(-50)2,100 217(953) (479)
Auxiliary boom nose. 130 (59) -24 (-11) -20 (-9) 174 (79)
8 40 ton (35 mt) hookblock hanging at boom nose.
50 ton (45 mt) hookblock hanging at boom nose.
800
1,000
(363)
(454)
-126
-157
(-57)
(-71)
-107
-134
(-49)
(-61)
1,033
1,291
(469)
(586)
60 ton (55 mt) hookblock hanging at boom nose. 1,250 (567) -197 (-89) -167 (-76) 1,614 (732)
8.3 ton (7.5 mt) headache ball hanging at boom nose. 371 (168) -58 (-26) -50 (-23) 479 (217)
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Working range

36 ft – 110 ft main boom and 33 ft – 56 ft lattice extension

(BOOM DEFLECTION NOT SHOWN)

180
56' EXT

170

160
33' EXT
150

140

130

110
120 70°

60° 100
110

50° 90
100

BOOM LENGTH AND EXTENSION IN FEET

80
HEIGHT FROM GROUND IN FEET

90
40°
70
80

60
70 30°

50
60

20° 40
50
36

40

30
10° 78°
Max.
Boom
Angle
20

10 0°

0
160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0
AXIS OF
ROTATION

OPERATING RADIUS IN FEET FROM AXIS OF ROTATION

Dimensions are for largest Grove

99.3" 104.1" furnished hook block and headache
ball, with anti-two block activated.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS700E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

TMS760E load charts

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 16,500 lb 100% 360˚

20 ft
Boom
Radius
#0001

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
120,000 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
68,250 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
54,900 53,100 52,000 41,800 36,800 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
39,350 38,700 37,850 33,400 29,000 25,300 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
29,400 28,400 28,700 25,000 22,200 21,750 20,000
35 (40) (51.5) (58) (63) (67) (69.5) (72)
23,050 22,100 22,750 22,000 20,200 19,000 18,500
40 (28) (45) (53) (59) (63) (66.5) (69)
17,550 18,250 18,800 17,800 17,300 17,300
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
14,050 14,850 15,600 16,000 16,000 16,000
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
12,200 12,950 13,650 14,100 14,100
55 (33.5) (44.5) (51) (56.5) (60)
10,050 10,850 11,600 12,000 12,200
60 (24) (38.5) (47) (52.5) (57)
9110 9900 10,250 10,600
65 (31.5) (42) (48.5) (53.5)
7650 8450 8820 9000
70 (22.5) (36.5) (44.5) (50)
7210 7580 7800
75 (30) (40) (46.5)
6150 6490 6600
80 (21.5) (34.5) (42.5)
5550 5800
85 (28.5) (38)
4730 5000
90 (20.5) (33)
4270
95 (27.5)
3600
100 (19.5)
Minimum boom angle (deg) for indicated length (no load) 0
Maximum boom length (ft) at 0 degree boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90 100 110
29,050 24,450 17,050 11,600 8570 6610 5380 4120 3110
0° (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101318

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 16,500 lb 100% Over rear

20 ft
Boom
Radius
#0001

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
120,00 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
68,250 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
55,650 53,100 52,000 41,800 36,800 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
44,100 39,600 38,000 33,400 29,000 25,300 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
32,400 29,750 28,700 25,000 22,200 21,750 20,000
35 (40) (51.5) (58) (63) (67) (69.5) (72)
26,050 25,500 23,600 22,000 20,200 19,000 18,500
40 (28) (45) (53) (59) (63) (66.5) (69)
20,000 19,700 18,800 17,800 17,300 17,300
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
17,850 16,800 16,500 16,000 16,000 16,000
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
14,900 14,650 14,100 14,100 14,100
55 (33.5) (44.5) (51) (56.5) (60)
13,050 12,800 12,200 12,200 12,200
60 (24) (38.5) (47) (52.5) (57)
11,450 10,800 10,600 10,600
65 (31.5) (42) (48.5) (53.5)
10,100 9450 9000 9000
70 (22.5) (36.5) (44.5) (50)
8290 7800 7800
75 (30) (40) (46.5)
7140 6800 6600
80 (21.5) (34.5) (42.5)
5800 5800
85 (28.5) (38)
5000 5000
90 (20.5) (33)
4440
95 (27.5)
3880
100 (19.5)
Minimum boom angle (deg) for indicated length (no load) 0
Maximum boom length (ft) at 0 degree boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90 100 110
29,050 24,450 17,050 11,950 9640 7810 6390 4770 3350
0° (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101319

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
10 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Load charts









  
  



 


   

  

     
          
NOTES:
           
 1. All capacities above the bold line are based

on structural strength of boom extension.
 * 
  2. 33 ft and 56 ft boom extension lengths may
 *  


 be used for single line lifting service.
 
 *
  3. Radii listed are for a fully extended boom

 
with the boom extension erected. For main
   
 
 
 boom lengths less than fully extended, the
     * 
   rated loads are determined by boom angle.

    
 
 Use only the column which corresponds to

   
the boom extension length and offset for
       * 
    which the machine is configured. For boom

   
     
        angles not shown, use the rating of the next

    
  lower boom angle.
      
4. WARNING: Operation of this machine with
  
  
  
      heavier loads than the capacities listed is

     

 


     strictly prohibited. Machine tipping with
  

 
 
 boom extension occurs rapidly and without

      

 
 

   advance warning.


 
  5. Boom angle is the angle above or below

 


 
   
 horizontal of the longitudinal axis of the


   

 




   boom base section after lifting rated load.




   
 
   
   6. Capacities listed are with outriggers properly


    extended and vertical jacks set only.
     

 
 

      


 
  

 
 
    

  

 
    

 

  




 



  
  


 

!""$"


" %  %
%  %  %
%
"
#
""% " "

 






   & &

!$

 
"
#"



!


!

"

 !"! 

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS700E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 11
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

TMS760E load charts

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 11,000 lb 100% 360˚

20 ft
Boom
Radius
#0101

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
120,000 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
68,250 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
48,550 48,350 47,650 41,800 36,800 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
34,300 33,650 32,800 33,400 29,000 25,300 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
25,250 24,350 25,000 25,000 22,200 21,750 20,000
35 (40) (51.5) (58) (63) (67) (69.5) (72)
19,500 18,700 19,350 20,050 20,200 19,000 18,500
40 (28) (45) (53) (59) (63) (66.5) (69)
14,650 15,350 16,050 16,750 17,300 17,300
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
11,550 12,350 13,050 13,750 14,300 14,850
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
9960 10,700 11,450 11,900 12,400
55 (33.5) (44.5) (51) (56.5) (60)
8040 8850 9590 10,000 10,400
60 (24) (38.5) (47) (52.5) (57)
7280 8070 8450 8830
65 (31.5) (42) (48.5) (53.5)
5970 6760 7140 7480
70 (22.5) (36.5) (44.5) (50)
5660 6020 6350
75 (30) (40) (46.5)
4710 5050 5370
80 (21.5) (34.5) (42.5)
4200 4510
85 (28.5) (38)
3460 3750
90 (20.5) (33)
3080
95 (27.5)
2480
100 (19.5)
Minimum boom angle (deg) for indicated length (no load) 0
Maximum boom length (ft) at 0 degree boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90 100 110
29,050 24,450 16,000 9340 6710 5030 4020 2920 2030
0° (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101320

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 11,000 lb 100% Over rear

20 ft
Boom
Radius
#0101

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
120,000 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
68,250 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
52,900 52,700 52,000 41,800 36,800 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
41,750 39,600 38,000 33,400 29,000 25,300 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
32,400 29,750 28,700 25,000 22,200 21,750 20,000
35 (40) (51.5) (58) (63) (67) (69.5) (72)
26,050 25,500 23,600 22,000 20,200 19,000 18,500
40 (28) (45) (53) (59) (63) (66.5) (69)
20,000 19,700 18,800 17,800 17,300 17,300
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
16,650 16,800 16,500 16,000 16,000 16,000
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
14,500 14,650 14,100 14,100 14,100
55 (33.5) (44.5) (51) (56.5) (60)
12,100 12,800 12,200 12,200 12,200
60 (24) (38.5) (47) (52.5) (57)
10,950 10,800 10,600 10,600
65 (31.5) (42) (48.5) (53.5)
9290 9450 9000 9000
70 (22.5) (36.5) (44.5) (50)
8290 7800 7800
75 (30) (40) (46.5)
7140 6600 6600
80 (21.5) (34.5) (42.5)
5800 5800
85 (28.5) (38)
5000 5000
90 (20.5) (33)
4440
95 (27.5)
3800
100 (19.5)
Minimum boom angle (deg) for indicated length (no load) 0
Maximum boom length (ft) at 0 degree boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90 100 110
29,050 24,450 17,050 11,950 9640 7810 6390 4770 3350
0° (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101321

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Load charts

36 ft – 110 ft 33 ft– 56 ft 11,000 lb 100% 360°

20 ft
Pounds
33 ft length 56 ft length
#0121 #0122 #0123 #0141 #0142 #0143
Feet 0° 25° 45° 0° 25° 45°
NOTES:
Offset Offset Offset Offset Offset Offset
 1. All capacities above the bold line are based on
 
structural strength of boom extension.
  *
  2. 33 ft and 56 ft boom extension lengths may be
  * 
   used for single line lifting service.

   *  3. Radii listed are for a fully extended boom with
   
the boom extension erected. For main boom
    
    lengths less than fully extended, the rated
     *
     loads are determined by boom angle. Use only

      the column which corresponds to the boom
    
     * extension length and offset for which the
       machine is configured. For boom angles not
      
      shown, use the rating of the next lower boom
       angle.
     
      4. WARNING: Operation of this machine with
       heavier loads than the capacities listed is
      
      strictly prohibited. Machine tipping with
!   #  !    boom extension occurs rapidly and without
" % "% "#% "!% "% "$%
#$  $   #  advance warning.
! "$% "% "% "#% "% "% 5. Boom angle is the angle above or below
  #    # $ 
"% "!% " % "% " % "% horizontal of the longitudinal axis of the
 #         boom base section after lifting rated load.
"% "% "#% "% "$% "%
$  #    $ 6. Capacities listed are with outriggers properly
 "!% "% "% "% "!%
extended and vertical jacks set only.
 $#  #   
"% "!% "$% "% "%
  # !  $
"% "% "% " % "%
 #  !   
"#% "% "% "$% "%
 # #
"!% "%
 !
"%
 
"$%


 

 

 
      
 
 


 

 !
 $


 
 






 
&$!&  $

!$

 
"
#"



!


!

"

 !"! 

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS700E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

TMS760E load charts

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 5500 lb 100% 360˚

20 ft
Boom
Radius
#0201

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
118,500 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
66,000 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
41,100 41,000 40,600 40,150 36,800 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
28,400 28,150 27,750 28,450 29,000 25,300 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
20,700 20,300 21,000 21,750 22,200 21,750 20,000
35 (40) (51.5) (58) (63) (67) (69.5) (72)
15,600 15,350 16,050 16,750 17,500 17,900 18,300
40 (28) (45) (53) (59) (63) (66.5) (69)
11,750 12,500 13,200 13,950 14,300 14,700
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
9040 9850 10,550 11,250 11,650 12,000
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
7720 8500 9210 9570 9940
55 (33.5) (44.5) (51) (56.5) (60)
6010 6810 7550 7900 8260
60 (24) (38.5) (47) (52.5) (57)
5410 6190 6540 6880
65 (31.5) (42) (48.5) (53.5)
4250 5020 5400 5740
70 (22.5) (36.5) (44.5) (50)
4030 4420 4770
75 (30) (40) (46.5)
3190 3570 3940
80 (21.5) (34.5) (42.5)
2830 3200
85 (28.5) (38)
2180 2550
90 (20.5) (33)
1980
95 (27.5)
1470
100 (19.5)
Minimum boom angle (deg) for indicated length (no load) 0
Maximum boom length (ft) at 0 degree boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90 100 110
0° 28,850 21,800 12,500 7080 4830 3410 2570 1710 1080
(29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101322

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 5500 lb 100% Over rear

20 ft
Boom
Radius
#0201

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
120,000 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
66,000 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
50,050 49,850 49,500 41,800 36,800 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
38,100 38,200 38,000 33,400 29,000 25,300 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
28,700 28,600 28,700 25,000 22,200 21,750 20,000
35 (40) (51.5) (58) (63) (67) (69.5) (72)
22,200 22,200 23,000 22,000 20,200 19,000 18,500
40 (28) (45) (53) (59) (63) (66.5) (69)
17,600 18,400 18,800 17,800 17,300 17,300
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
14,100 14,950 15,750 16,000 16,000 16,000
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
12,250 13,050 13,800 14,100 14,100
55 (33.5) (44.5) (51) (56.5) (60)
10,050 10,900 11,650 12,000 12,200
60 (24) (38.5) (47) (52.5) (57)
9100 9890 10,200 10,550
65 (31.5) (42) (48.5) (53.5)
7590 8380 8740 9000
70 (22.5) (36.5) (44.5) (50)
7100 7480 7800
75 (30) (40) (46.5)
5990 6370 6600
80 (21.5) (34.5) (42.5)
5410 5770
85 (28.5) (38)
4570 4920
90 (20.5) (33)
4180
95 (27.5)
3520
100 (19.5)
Minimum boom angle (deg) for indicated length (no load) 0
Maximum boom length (ft) at 0 degree boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90 100 110
29,050 24,450 17,050 11,600 8550 6520 5190 3950 3020
0° (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101323

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
14 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Load charts

36 ft – 110 ft 33 ft – 56 ft 5500 lb 100% 360°

20 ft
Pounds
33 ft length 56 ft length
#0221 #0222 #0223 #0241 #0242 #0243
Feet 0° 25° 45° 0° 25° 45°
Offset Offset Offset Offset Offset Offset NOTES:
  1. All capacities above the bold line are based
 !"#$
on structural strength of boom extension.
%   *#
!"&$ !"#$ 2. 33 ft and 56 ft boom extension lengths may

   *#% #
!"
$ !"#$ !""%$ be used for single line lifting service.

%   
% *"
 # 3. Radii listed are for a fully extended boom
!"$ !""$ !"#$ !"&$
  " # with the boom extension erected. For main
% !"$ !"
%$ !""%$ !"
%$ boom lengths less than fully extended, the
%% 
%  &  #% *%
!&#$ !"%$ !"%$ !"$ !"#$ rated loads are determined by boom angle.
& #"# #%% &# "%
 %
 Use only the column which corresponds to
!&&$ !"%$ !"%$ !"$ !""$
"
 "  &&% "& % *#& the boom extension length and offset for
&% !&%$ !&#$ !"%$ !& $ !"%$ !"#$
which the machine is configured. For boom
" &# "& &
 &# % " 
!&%$ !&%%$ !&#$ !&"%$ !"$ !""%$ angles not shown, use the rating of the next
"% % &# &" &
# && lower boom angle.
!% $ !&$ !&%%$ !&%%$ !"$ !"%$


 %% %#
 %%
%# %% 4. WARNING: Operation of this machine with
#
!%&%$ !&%$ !&%$ !&%$ !& $ !"$
heavier loads than the capacities listed is
#% ""

%
%



" 
%
!%
$ !%#$ !&$ !&%$ !&"%$ !"$ strictly prohibited. Machine tipping with
 % "%
# "
 

!%$ !%%%$ !%"$ !% %$ !&%%$ !&#%$ boom extension occurs rapidly and without

% %   
 

"  advance warning.

!
#%$ !%%$ !%
$ !%"$ !&$ !&&%$
 %# #  & %  & 5. Boom angle is the angle above or below
 !
%%$ !
%$ !%$ !%%$ !&$ !&
$ horizontal of the longitudinal axis of the
&& # 
 &  
% !
%$ !
&%$ !
"%$ !%%$ !%#%$ !&$ boom base section after lifting rated load.
" &
 "
 % ## 6. Capacities listed are with outriggers properly
 ! %$ !
$ !%%$ !%&$ !% %$

 & % & extended and vertical jacks set only.
%
! %$ !
#$ !%%$ !%&%$
  &
 # 
!
%%$ !%$ !%%$
% % 
%
!
#%$ !%%$
   
 
 " "
%
%
&
#
   

  
  # &
 
 






   &# 

!$

 
"
#"



!


!

"

 !"! 

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS700E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 15
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

TMS760E load charts

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 0 lb 100% 360˚

20 ft
Boom
Radius
#0801

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
117,500 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
56,000 55,750 55,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
34,350 34,300 33,850 33,400 34,100 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
23,350 23,100 22,700 23,400 24,150 24,850 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
16,650 16,250 16,950 17,700 18,400 18,850 19,300
35 (40) (51.5) (58) (63) (67) (69.5) (72)
12,250 12,000 12,650 13,400 14,100 14,550 14,950
40 (28) (45) (53) (59) (63) (66.5) (69)
8890 9620 10,300 11,050 11,450 11,800
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
6510 7330 8040 8750 9130 9510
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
5470 6250 6960 7320 7690
55 (33.5) (44.5) (51) (56.5) (60)
3990 4790 5530 5880 6240
60 (24) (38.5) (47) (52.5) (57)
3580 4350 4700 5050
65 (31.5) (42) (48.5) (53.5)
2560 3340 3710 4060
70 (22.5) (36.5) (44.5) (50)
2480 2870 3220
75 (30) (40) (46.5)
1740 2130 2500
80 (21.5) (34.5) (42.5)
1480 1850
85 (28.5) (38)
1290
90 (33)
Minimum boom angle (deg) for indicated length (no load) 14 26
Maximum boom length (ft) at 0 degree boom angle (no load) 90
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90
23,700 17,650 9550 4810 2960 1840 1210
0° (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101324

Boom Counterweight Outriggers Rotation

36 ft – 110 ft 0 lb 100% Over rear

20 ft
Boom
Radius
#0801

Main boom length in feet

Feet 35 40 50 **60 70 80 90 100 110
120,000 84,400 80,200 *62,500
10 (69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12 (65.5) (68.5) (73.5) (77) (78)
87,300 82,700 80,200 61,000 36,800 *36,800 *31,000
15 (59.5) (63.5) (70) (74) (76.5) (78) (78)
62,400 62,200 61,800 50,650 36,800 36,800 31,000 *29,100 *24,000
20 (49) (55) (63.5) (69) (72) (75) (77) (78) (78)
47,250 47,050 46,700 41,800 36,800 34,000 30,000 27,000 24,000
25 (36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
32,950 33,100 33,050 33,400 29,000 25,300 24,200 22,000
30 (31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
24,600 24,500 25,350 25,000 22,200 21,750 20,000
35 (40) (51.5) (58) (63) (67) (69.5) (72)
18,800 18,750 19,600 20,450 20,200 19,000 18,500
40 (28) (45) (53) (59) (63) (66.5) (69)
14,650 15,500 16,300 17,100 17,300 17,300
45 (37) (47.5) (54.5) (59.5) (63) (66.5)
11,550 12,400 13,200 14,000 14,350 14,750
50 (26.5) (41) (49.5) (55.5) (60) (63.5)
9990 10,800 11,550 11,900 12,300
55 (33.5) (44.5) (51) (56.5) (60)
8020 8860 9620 9980 10,300
60 (24) (38.5) (47) (52.5) (57)
7240 8030 8370 8720
65 (31.5) (42) (48.5) (53.5)
5890 6680 7040 7380
70 (22.5) (36.5) (44.5) (50)
5520 5910 6240
75 (30) (40) (46.5)
4540 4910 5270
80 (21.5) (34.5) (42.5)
4050 4410
85 (28.5) (38)
3300 3650
90 (20.5) (33)
2980
95 (27.5)
2380
100 (19.5)
Minimum boom angle (deg) for indicated length (no load) 0
Maximum boom length (ft) at 0 degree boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle.
Lifting capacities at zero degree boom angle
Main boom length in feet
Boom
angle 35 40 50 **60 70 80 90 100 110
29,050 24,450 15,250 9320 6660 4930 3820 2740 1940
0° (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet.
** ft boom length is with inner-mid extended and outer-mid & fly retracted. A6-829-101325

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
16 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Load charts

36 ft – 110 ft 33 ft – 56 ft 0 lb 100% 360°

20 ft
Pounds
33 ft length 56 ft length
#0821 #0822 #0823 #0841 #0842 #0843
Feet 0° 25° 45° 0° 25° 45°
Offset Offset Offset Offset Offset Offset NOTES:

   1. All capacities above the bold line are based on

!"#$
  *# structural strength of boom extension.
%
!"&$ !"#$ 2. 33 ft and 56 ft boom extension lengths may be
  *#% #

 !"
$ !"#$ !""%$ used for single line lifting service.

% # 
% *"
 # 3. Radii listed are for a fully extended boom with
!"$ !""$ !"#$ !"&$
%  " # the boom extension erected. For main boom
% !"$ !"
%$ !""%$ !"
%$ lengths less than fully extended, the rated
%% #%  &  #% *%
!&#$ !"%$ !"%$ !"$ !"#$ loads are determined by boom angle. Use
" # &# "%
 %
 only the column which corresponds to the
& !&&$ !"%$ !"%$ !"$ !""$
%"" &  &&% &
 % *#& boom extension length and offset for which
&% !&%$ !&#$ !"%$ !& $ !"%$ !"#$
the machine is configured. For boom angles

"
 %"& &" %" % " 
" !&%$ !&%%$ !&#$ !&"%$ !"$ !""%$ not shown, use the rating of the next lower
"% #"
"" %

#
# && boom angle.
!% $ !&$ !&%%$ !&%%$ !"$ !"%$
  
  "
%# %% 4. WARNING: Operation of this machine with
#
!%&%$ !&%$ !&%$ !&%$ !& $ !"$
heavier loads than the capacities listed is

# # & %
 
%
#% !%
$ !%#$ !&$ !&%$ !&"%$ !"$ strictly prohibited. Machine tipping with
   %
   
" 
% 
 boom extension occurs rapidly and without
!%$ !%%%$ !%"$ !% %$ !&%%$ !&#%$

  "   & #&  advance warning.
% !
#%$ !%%$ !%
$ !%"$ !&$ !&&%$
5. Boom angle is the angle above or below
 
" "& %   #
!
%$ !%$ !%%$ !&$ !&
$ horizontal of the longitudinal axis of the
 #   #"  
% !
&%$ !
"%$ !%%$ !%#%$ !&$ boom base section after lifting rated load.

 
% #" 6. Capacities listed are with outriggers properly

!%&$ !% %$
& 

extended and vertical jacks set only.
%
!%%$ !%&%$
   
 

&
%
%
# % %
  

  
  & %
 
 






   &# 


!$

 
"
#"



!


!

"

 !"! 

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS700E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 17
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Working range
36 ft – 110 ft main boom and 33 ft – 56 ft lattice extension with 40 ft insert

(BOOM DEFLECTION NOT SHOWN)

220 0° 56' EXT.

25°
210

45°
200
33' EXT.
190

180

170

160

150

140

130

BOOM LENGTH AND EXTENSION IN FEET

110
HEIGHT FROM GROUND IN FEET

120 70°

60° 100
110

50° 90
100

80
90
40°
70
80

60
70 30°

50
60

20° 40
50
36

40

10° 78°
30 Max.
Boom
Angle
20

0°
10

0
200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0
AXIS OF
ROTATION
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION

Dimensions are for largest Grove

99.3"
furnished hook block and headache
104.1"
ball, with anti-two block activated.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
18 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Load charts

36 ft – 110 ft 33 ft – 56 ft 20 ft 16,500 lb 100% 360°

20 ft
Pounds
33 ft length 56 ft length
#0064 #0065 #0066 #0084 #0085 #0086
Feet 0° 25° 45° 0° 25° 45°
NOTES:
Offset Offset Offset Offset Offset Offset
*
 1. All capacities above the bold line are based on
 
structural strength of boom extension.

 *
  2. 33 ft and 56 ft boom extension lengths may be
 * 
    used for single line lifting service.
   3. Radii listed are for a fully extended boom with
   
the boom extension erected. For main boom
 

   


     lengths less than fully extended, the rated
 
 
  
 *
     loads are determined by boom angle. Use only

      the column which corresponds to the boom
       
extension length and offset for which the
 
     
      machine is configured. For boom angles not
 

     *
      shown, use the rating of the next lower boom
  
     angle.
       
   
      4. WARNING: Operation of this machine with
        heavier loads than the capacities listed is

   
    

     
  strictly prohibited. Machine tipping with

        boom extension occurs rapidly and without
 
       
    
   advance warning.
   
 
  
 5. Boom angle is the angle above or below
         
       horizontal of the longitudinal axis of the boom

   
    base section after lifting rated load.
       
      6. Capacities listed are with outriggers properly
        extended and vertical jacks set only.
  
  
     
   



  
  
      
     
     
      
  
  
    
  

 

 ! "# !
 
   
   
 
 
      
 
 






   
 

!$

 
"
#"



!


!

"

 !"! 

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS700E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 19
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Load charts

36 ft – 110 ft 33 ft – 56 ft 40 ft 16,500 lb 100% 360°

20 ft

Pounds
33 ft Length 56 ft Length
#0064 #0065 #0066 #0084 #0085 #0086
Feet 0° 25° 45° 0° 25° 45°
NOTES:
Offset Offset Offset Offset Offset Offset
  1. All capacities above the bold line are based on

structural strength of boom extension.
  !
   2. 33 ft and 56 ft boom extension lengths may be
 "  #!
   used for single line lifting service.
  # *! " ! 3. Radii listed are for a fully extended boom with
"   
"   "! the boom extension erected. For main boom
 !    lengths less than fully extended, the rated
"  " # "! *"!
   "  "  loads are determined by boom angle. Use only
 "  "  "## "# the column which corresponds to the boom
 ! " ! 
"# " " ## "!# extension length and offset for which the

   #  
machine is configured. For boom angles not
#  "" "" ## ## #"
       shown, use the rating of the next lower boom
 # " " #"# ## #"
#    #  angle.

 # # #  #" #"" #" 4. WARNING: Operation of this machine with
    ! 
##  # #  !" #!" #! heavier loads than the capacities listed is
!
 #  "   # strictly prohibited. Machine tipping with
#  #"  #"  !" ! " ! 
!   # #  ! boom extension occurs rapidly and without
!! !  #!  ## ! !" ! advance warning.
      
! # #! !# ! ! 5. Boom angle is the angle above or below
!!
#     
horizontal of the longitudinal axis of the boom
!# ! ! ! ! !! !" !
    #  base section after lifting rated load.
!! ! !! !# !#
!#  ! " ! " 6. Capacities listed are with outriggers properly

!" !"! !! !# ! !! extended and vertical jacks set only.
      !
!" !!# !# !#
"  
!" !##
! ! 
!
! !


 



 

     
!!



  


  

 
 


 
 






 
# !! 

!$

 
"
#"



!


!

"

 !"! 

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
20 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Load handling

Weight reductions for load handling devices Line pulls and reeving information
33 ft-56 ft folding boom extension Permissible Nominal

*33 ft extension (erected) 4350 lb Hoists Cable/Specs. Line pulls Cable length

*56 ft extension (erected) 9450 lb 3/4 in (19 mm) 6x37 Class,

Folding ext. with 20 ft insert Main EIPS, IWRC Special Flexible 16,800 lb 500 ft

*33 ft extension (erected) 9410 lb Min. Breaking Strength 58,800 lb.

*56 ft extension (erected) 16,010 lb

Folding ext. with 40 ft insert 19 mm (.75 in) Flex-X 35

*33 ft extension (erected) 16,280 lb Main & Aux Rotation resistant (non-rotating) 16,800 lb 500 ft

*56 ft extension (erected) 24,390 lb Min breaking strength 85,800 lb

*Reduction of main boom capacities

(no deduct required for stowed boom extension) The approximate weight of 3/4 in wire rope is 1.5 lb/ft

When lifting over swingaway and/or jib combinations, deduct

total weight of all load handling devices reeved over main boom
nose directly from swingaway or jib capacity.

Auxiliary boom nose 137 lb Hoist performance

Hook blocks and headache balls: Wire Hoist line pulls Drum rope
60 Ust, 5 sheave 1125 lb + Rope Two speed hoist Capacity (ft)
50 Ust, 3 sheave 1075 lb + Layer Low High
40 Ust, 3 sheave 785 lb + Available lb* Available lb* Layer Total
8.3 Ust Headache ball (non-swivel) 350 lb + 1 18,134 9067 101 101
8.3 Ust Headache ball (swivel) 370 lb + 2 16,668 8334 110 211
3 15,420 7710 120 331
+ Refer to rating plate for actual weight.
4 14,347 7174 129 460
NOTE: All load handling devices and boom attachments 5 13,413 6707 139 599
are considered part of the load and suitable allowances
MUST BE MADE for their combined weights. Weights are for 6 12,594 6297 149 748
Grove furnished equipment. *Max. lifting capacity: 6x37 or 35x7 class = 16,800 lb

Working area diagram

Bold lines determine the limiting position of any load for operation within working areas indicated.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS700E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 21
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Symbols glossary

Axles Counterweight Grade Outriggers

Boom Drive Heavy duty jib Radius

Boom elevation Electrical system Hoist Rotation

Boom extension Engine Hookblock Speed

H

Boom length Extension Hydraulic system Steering

Boom nose Frame Lights Suspension

Brakes Fuel tank capacity Oil Swing

Cab Gear Outrigger controls Tires

Transmission

22
 View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Notes

Grove TMS700E 23
View
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com

Regional headquarters
Manitowoc - Americas Manitowoc - Europe, Middle East, Africa Manitowoc - Asia Pacific
Manitowoc, Wisconsin, USA Ecully, France Shanghai, China
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062

Regional offices
This document is non-contractual. Constant improvement and engineering progress
Americas
Brazil
Portugal
Baltar
Factories make it necessary that we reserve the right to make specification, equipment, and price
changes without notice. Illustrations shown may include optional equipment and
Brazil accessories and may not include all standard equipment.
Alphaville Russia
Alphaville
Mexico Moscow
China
Monterrey U.A.E.
TaiAn
Chile Dubai
Zhangjiagang
Santiago U.K.
France
Buckingham
Charlieu
La Clayette
Europe, Middle East,
Moulins
Africa Asia - Pacific
Australia Germany
Czech Republic
Brisbane Wilhelmshaven
Netvorice
Melbourne India
France
Sydney Pune
Baudemont
Cergy China Italy
Decines Beijing Niella Tanaro
Germany Chengdu Portugal
Langenfeld Guangzhou Baltar
India Fânzeres
Hungary
Budapest Delhi Slovakia
Hyderabad Saris
Italy Pune
Lainate USA
Korea Manitowoc
Netherlands Seoul Port Washington
Breda Philippines Shady Grove
Poland Makati City
Warsaw Singapore

©2010 Manitowoc
Printed in USA
Form No. TMS700E
Part No. 00-024-2M-1110 www.manitowoc.com