an investment in quality, precision & performance
The Baumcut 26.4 programmable cutter is efficient, compact, and easy to operate, with
minimal maintenance. This heavy-duty, fully hydraulic cutter features easy push-
button programming and stores up to 99 programs with 6464 cut steps.
The Baumcut 26.4 offers high-productivity precision cutting with maximum safety in
mind. Infrared safety beams, two-hand timed cut release and covered rear table help
ensure operator safety. Noise levels are kept to a minimum since the motor runs only
during cutting operations.
Programming is automatic. Simply cut the first ream manually, and the cuts are
stored as a program. A large central LCD display indicates data in the selected
language. Knife changes are easy, with a front adjustment. Built-in table light and
optical cutting line indicator yields more precise cutting.
Baumcut 26.4 Features
· Push-button programming – stores up to 99 programs, 6464 cut steps
· Large, central LC display – indicates data in the selected language
· Optical cutting line indicator & table light – for precision cutting
· Automatic programming – first manual cuts stored as a program
· Repeat function – cut sizes can be repeated as needed
· Low noise levels – motor runs only during cutting operations
· Manual backgauge positioning with electronic handwheel
· Hydraulic knife drive and clamping
· Overload protection – for main motor and backgauge drive
· Motor-powered backgauge drive
· Easy knife change with front adjustment – tools included
· Hydraulic clamp pressure is adjustable for a variety of materials
· Non-corrosive closed table surface
· Machine self-diagnosis with error indication
BAUM 1660 Campbell Road, Sidney, Ohio, USA 45365
Phone: 1 / 937 / 492-1281 or 1 / 800 / 543-6107 Fax: 1 / 937 / 492-7280
email:
[email protected] Internet address: http://www.baumfolder.com
WE ARE THE FUTURE !
Infrared Safety Light Beams
The Infrared Safety Light Beams are standard equipment on
the Baumcut 26.4 paper cutter. (This feature is optional on
other manufacturer’s cutters in this class.) This system
exceeds current mandatory safety requirements.
Spring-loaded Backgauge Fingers
Every backgauge finger is spring-loaded to prevent
the bottom sheet from sliding underneath.
Rear Safety Cover
The see-through rear safety cover prevents reaching
into the cutting area from behind while providing a clear
view of the backgauge. It also keeps the cutter table
free of debris.
BAUM P.O Box 728, 1660 Campbell Road, Sidney, Ohio, USA 45365
WE ARE THE FUTURE !
Two-Hand Cut Button
Standard equipment includes the two-hand cut
button safety control. Provides additional
security for the operator. Other cutter
manufacturers offer this feature as an option.
Clamp Foot Pedal Safety Cover
Protects against inadvertent lowering of the clamp.
No one likes pinched fingers.
Safety Features
· Infrared safety beams are standard
· Two-hand, timed cut release with non-repeat device
· Rear table fully covered
· Permanent check of knife position
· Machine self-diagnosis with error indication
· Cover over foot pedal
Safety False Clamp Plate
During installation and removal the operator’s hands are
not under the knife. Simply press the detent locations with
a common screwdriver to release the detent.
BAUM P.O Box 728, 1660 Campbell Road, Sidney, Ohio, USA 45365
Exclusive Easy Knife Leveling
Easily accessible eccentric adjustment from the front of the
cutter provides knife leveling with no screws to adjust.
Knife Change & Clamp
Pressure Adjustment
Easy knife change and clamp pressure
adjustments are made from the front
of the cutter.
Safety Knife Removal & Installation
An added edge shield connects the knife removal tools and
provides safe and easy knife removal and installation.
BAUM 1660 Campbell Road, Sidney, Ohio, USA 45365
Phone: 1 / 937 / 492-1281 or 1 / 800 / 543-6107 Fax: 1 / 937 / 492-7280
email:
[email protected] Internet address: http://www.baumfolder.com
Baumcut 26.4 Microprocessor Control provides
many features for your demanding applications:
· 99 programs fro storing separate jobs
· 6464 total cut step memory
· Automatic and manual cutting modes
· 999 maximum cut steps per program
· Records total number of lifetime cuts
· Records total number of knife changes
· Adjustable clamping time for extra air escape
· Adjustable knife resting time
· Block programming
· Jogging mark notation in cutting programs
· LCD readout display
· Membrane touch panel keypad
· Can enter and divide fractions into decimals
· Push-out programming steps
BAUM 1660 Campbell Road, Sidney, Ohio, USA 45365
Phone: 1 / 937 / 492-1281 or 1 / 800 / 543-6107 Fax: 1 / 937 / 492-7280
email:
[email protected] Internet address: http://www.baumfolder.com
WE ARE THE FUTURE !
BAUM 1660 Campbell Road, Sidney, Ohio, USA 45365
Phone: 1 / 937 / 492-1281 or 1 / 800 / 543-6107 Fax: 1 / 937 / 492-7280
email:
[email protected] Internet address: http://www.baumfolder.com
Baumcut 26.4 Specifications
Baumcut 26.4 Floor Plan: Standard Accessories:
Internet: http://www.baumfolder.com · email: [email protected]
BAUM P.O Box 728, 1660 Campbell Road, Sidney, Ohio, USA 45365
