100% found this document useful (4 votes)
5K views6 pages

W203 SAM (Rear)

Rear Sam details and diagram for your W203. Engine M111/M271

Uploaded by

Romeo Echo Tango
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (4 votes)
5K views6 pages

W203 SAM (Rear)

Rear Sam details and diagram for your W203. Engine M111/M271

Uploaded by

Romeo Echo Tango
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Mercedes Benz 203 Rear SAM Control Unit

Location
The rear SAM control unit with fuse and relay module
(N10/2) is located on the control unit platform in the
left-hand side of the trunk.
Control
· Exterior lights function, master control unit for the turn
signal functions
Model 203 and Model 209.3/4 Locations
· Wiper system (WSA), rear wiper system only 203.2
Model 203.0/2/7 up to 23.4.04 and Model 203.0/2/7 as of
24.4.04
· Central locking (CL [ZV])
Model 203.0/2/7 and Model 209.3/4
· Heated rear window (HHS)
Model 203.0/2/7 and Model 209.3 and Model 209.4
· Master control unit for the anti-theft alarm system (ATA
[EDW])
Model 203.0/2/7 and Model 209.3/4
· Rear head restraint lowering mechanism (RHR [KAF])
Model 203, 209.3 and Model 209.4
· Rear roller blind
Model 203.0, 209.3
Switching of consumers
• Left taillamp (complete)
• Right taillamp (complete)
• License plate illumination
• Center high-mounted stop lamp
• Left and right side marker I (model 203.7)
• Trunk illumination
• Alarm siren with additional battery (with code 551 via
interface)
• Rear head restraint release valve with cutout delay
(model 203.0)
• Rear-end door wiper motor (model 203.2)
• Trunk lid actuation CL [ZV] motor
Scanning of switches, pickups and sensors
• Front door contact switch
• Left rear door contact switch (model 203.0/2)
• Right rear door contact switch (model 203.0/2)
• Luggage compartment lamp switch
• Trunk lid external operation switch
• Trunk lid contact switch
• ATA [EDW] hood switch (with code 551)
• Trunk lid internal operation switch I
• Fuel tank sensor 1
• Fuel tank sensor 2
• Seat locking mechanism switch (model 209)
• ATA [EDW] inclination sensor (with code 551 via
interface)
• CL [ZV] radio receiver (via interface)
• Integrated crash sensor
Switching the following relays
• Tank cap pole reverser relays 1 and 2
• Circuit 15R relays 1 and 2
• Heated rear window relay
bottom view
• Rear roller blind relay (203.0, 209.3)
Voltage supply for the following control units

• Circuit 30: ATA [EDW] inclination sensor (plug 4)


• Circuit 30: ATA [EDW] alarm signal horn (plug 4)
• Circuit 30: Voice control system control unit (plug 5) or

Circuit 30: Telephone interface (USA) (in model 209 plug 5)


or Hands-free system control unit (JAPAN) (in model 209 as
of 06.04 plug 5)
• Circuit 30: TPM [RDK] control unit (in model 209 plug 7)
• Circuit 30: TV tuner (ECE and (USA) in model 203 up to
03.04 plug 9) or Circuit 30: MOST TV tuner (ECE and (USA)
in model 203 as of 04.04 plug 9) or Circuit 30: TV tuner or
MOST TV tuner (ECE and (USA) in model 209 up to 05.05
plug 9) or Circuit 30: Analog/digital combination tuner (ECE
and (USA) in model 209 as of 06.05 plug 9)
• Circuit 30: Stationary heater radio remote control receiver
(plug 16)
• Circuit 30: Trailer recognition control unit (plug 17)
• Circuit 30: Power soft top control unit (in model 209.4
plug 17)
• Circuit 30: CD player with changer in glove compartment
(in model 209 plug 20)
• Circuit 30: Overhead control panel control unit (plug 22)
• Circuit 30: Amplifier module 1, window antenna (in model
203 plug 23) and
Circuit 30: Amplifier module 2, window antenna (in model
203.0 and 203.7 as of 04.04 plug 23)
• Circuit 30: Left door Keyless Go control unit (in model
209 plug 28) or Circuit 30: Rear module Keyless Go control
unit (in model 209 plug 28)
• Circuit 15R: Driver-side front seat adjustment control unit side view
with memory (plug 1)
• Circuit 15R: Passenger-side front seat adjustment control unit with memory (plug 1)
• Circuit 15R: Voice control system control unit (plug 5)
• Circuit 15R: PTS control unit (plug 12)
• Circuit 15R: NECK-PRO head restraint triggering device (as of 06.05 plug 26)
• Circuit 15: Front SAM control unit with fuse and relay module (plug 1)
• Circuit 15: Trailer recognition control unit (plug 15)
CAN connections
• CAN link between rear SAM control unit (N10/2) and CAN-B voltage distributor (plug 2)
• CAN: Tire pressure loss warning control unit (in model 209 plug 8)
• CAN: Remote trunk closing control unit (in model 209.3 plug 10)
• CAN: UCP [OBF] control unit (plug 11)
• CAN: PTS control unit (plug 12)
• CAN: Trailer recognition control unit (plug 15)
• CAN: Power soft top control unit (in model 209.4 plug 18)
• CAN: Overhead control panel control unit (plug 22)
CAN signals
The rear SAM control unit with fuse and relay module (N10/2) is a device on the CAN-B in the overall network.

Connector assignment (bottom view) of rear SAM control unit with fuse and relay module (N10/2)
Connector assignment (side view) of rear SAM control unit with fuse and relay module (N10/2)
GF54.15-P-1256-01P Fuse assignment of rear fuse and Model 203
relay box

1 to 20 Socket

N10/2 Rear AM control unit with fuse


and relay module

A to H

A Fuel Pump Relay


B Relay 2 Terminal 15R
C Reserve Relay 2
D Reserve Relay 1
E Rear Window Defroster
F Relay 1 Terminal 15R
G Filler Cap Relay Polarity Reverser 1
H Filler Cap Relay Polarity Reverser 2

P54.15-2206-06

Rating in
Socket Fuse Circuit Plug cage Fused line Fused function amperes
(A)
1 N10/2f1 15R Valid for model 203.0/2/7 with code
(242) Electrically adjustable front
passenger seat with memory:
1, pin 6 BKPK 2.5 mm2 Front passenger front seat adjustment 30
control unit with memory (N32/2)
Valid for model 203.0/2 without code
(242) Electrically adjustable front
passenger seat with memory:
1, pin 6 BKPK 2.5 mm2 Front passenger partially-electric seat 30
adjustment switch (S23/1)
2 N10/2f2 15R Valid for model 203.0/2/7 with code
(275) Electrically adjustable driver
seat, steering column and outside
1, pin 5 BKYE 2.5 mm2 mirrors with memory: 30
Driver front seat adjustment control unit
with memory (N32/1)
Valid for model 203.0/2 without code
(275) Electrically adjustable driver
seat, steering column and outside
1, pin 5 BKYE 2.5 mm2 mirrors with memory: 30
Driver partially-electric seat adjustment
switch (S22/1)
3 N10/2f3 30 Valid for model 203.0 with code (220)
Parktronic system (PTS):
17, pin 1 RDGN 0.75 mm2 Dome lamp (A44/3e3) 7.5
Valid for model 203.7:
17, pin 1 RDGN 0.75 mm2 Dome lamp (E15/3e3) 7.5
Valid for model 203.2 with code (220)
Parktronic system (PTS):
17, pin 1 RDGN 0.5 mm2 Dome lamp (A44/3e3) 7.5
Right luggage compartment lamp
(E18/4)
Left luggage compartment lamp
(E18/5)
Valid for code (228) Stationary heater:
16, pin 1 RDGN 0.5 mm2 STH radio remote control receiver 7.5
(A6/1)
Valid for code (860) TV tuner:
9, pin 1 RDYE 0.75 mm2 TV tuner (A2/42) (up to 29.2.04) 20
TV tuner (MOST) (A2/10)
(as of 1.4.04)
4 N10/2f4 30 - - Fuel pump relay (N10/2kA) 20
5 N10/2f5 30 Valid for engine 112.961 (up to
27, pin 3 RD 0.75 mm2 31.3.04): 20
Charge air cooler circulation pump
(M44)
- -
Valid without engine 112.961:
Backup relay 2 (N10/2kC)
6 N10/2f6 30 28, pin 1 - Spare 25
7 N10/2f7 15R - - Backup relay 1 (N10/2kD) 7.5
8 N10/2f8 30 Valid for model 203.0/7 (up to 31.3.04),
model 203.2:
23, pin 4 RDYE 0.75 mm2 Amplifier module 1, window antenna 7.5
(A2/71)
Valid for model 203.0/7 (as of 1.4.04):
23, pin 4 RDYE 0.75 mm2 Amplifier module 2, window antenna 7.5
(A2/72)
Valid for code (551) Anti-theft alarm
system (ATA [EDW]):
4, pin 4 RDBU 0.5 mm2 Alarm signal horn (H3) 7.5
4, pin 5 RDWH 0.5 mm2 ATA [EDW] inclination sensor (B33)
9 N10/2f9 30 22, pin 4 RDBU 2.5 mm2 Overhead control panel control unit 25
(N70)
10 N10/2f10 15R 20, pin 5 BK 2.5 mm2 Heated rear window (R1) 40
11 N10/2f11 30 20, pin 3 - Spare 20
12 N10/2f12 15R Valid for model 203.2:
20, pin 2 BKGN 1.5 mm2 Interior socket (X58/1) 15
Valid for model 203.0 with code (494)
USA version (up to 31.3.04):
20, pin 2 RDBU 1.5 mm2 Power outlet (X58/27) 15
13 N10/2f13 15R Valid for model 203.0/2 with code (404)
Left multicontour seat and code (405)
Right multicontour seat:
19, pin 1 BKYE 0.75 mm2 Multicontour seat pneumatic pump 5
(M40)
Valid for code (813) Voice control
system (VCS [SBS]):
5, pin 2 BKYE 0.5 mm2 Voice control system control unit 5
(A35/11)
Valid for code (498) Japan version:
5, pin 2 RDBK 0.75 mm2 VICS+ETC voltage supply separation
point (X137/1) 5
Valid for model 203.0/2 without code
(220) Parktronic system (PTS):
12, pin 5 BKGY 0.5 mm2 Rear dome lamp (E15/3) 5
Valid for model 203.0/2 with code (220)
Parktronic system (PTS):
12, pin 5 BKGY 0.5 mm2 Rear dome lamp PTS warning indicator 5
(A44/3)
PTS control unit (N62)
14 N10/2f14 15R 20, pin 1 BKYE 1.5 mm2 Valid for model 203.2: 15
Tailgate wiper motor (M6/4)
15 N10/2f15 30 - - Fuel filler cap polarity change relay 1 10
(N10/2kG)
Fuel filler cap polarity change relay 2
(N10/2kH)
16 N10/2f16 30 5, pin 1 RDBK 0.75 mm2 Valid for code (813) Voice control 20
system (VCS [SBS]):
Voice control system control unit
(A35/11)
17 N10/2f17 30 S17 RDGN 2.5 mm2 Valid for code (550) Trailer hitch: 20
(external Trailer recognition control unit (N28/1)
fuse)
18 N10/2f18 30 S18 RDYE 2.5 mm2 Valid for code (550) Trailer hitch: 20
(external Trailer hitch socket (13-pin) (X58)
fuse)
19 N10/2f19 30 S19 RDWH 1.5 mm2 Valid for model 203.0/2 with code (404) 20
(external Left multicontour seat and code (405)
fuse) Right multicontour seat:
Multicontour seat pneumatic pump
(M40)
20 N10/2f20 30 S20 Valid for model 203.2/7 with code (494)
(external USA version:
fuse) RDBU 1.5 mm2 Power outlet (X58/27) 15
Valid for model 203.0 with code (540)
Electric rear window roller blind:
RDBU 0.75 mm2 Rear window roller blind relay (K74) 15

You might also like