MANUFACTURER'S MAX BREAK-OFF

(MAX GRIP + L) REF

IDENTIFICATION "MI" MEASURED FROM
H TOP OF BODY
B C (MAX GRIP + .020) MIN
HEX
D MAX E J MIN
F
D
.125 MAX

N
MIN

8
R RAD INSERT NUT
SLEEVE
FASTENER IDENTIFICATION COREBOLT BODY
"2041" AND "BLANK" THREAD K MAX
LOCKING
OR "X" OR "Y"
FEATURE TYPICAL INSTALLATION

E H J
PART NOM B C D F K L N R
DIA HEAD DIA
NUMBER DIA HEX REF DIA FLATS MAX REF MIN MAX
MAX HTS MIN

.1895
BG2041( )-06-( ) 3/16 .1875 .290
.1885
.850
.312 .2026 .112 .080
BG2041( )-06-( )X 13/64 .1995 .750 .340
.305 .2016 .109 .073
.300
.2182
BG2041( )-06-( )Y 7/32 .2150 .900
.2172
5/16 .030
.2495
BG2041( )-08-( ) 1/4 .2470 .380
.2485
.980
.375 .2651 .135 .090
BG2041( )-08-( )X 17/64 .2620 .800 .409
.367 .2641 .131 .083
.400
.2807
BG2041( )-08-( )Y 9/32 .2775 1.040
.2797
.3120
BG2041( )-10-( ) 5/16 .3090 .475 1.100
.3110
.437 .3276 .152 .112
BG2041( )-10-( )X 21/64 3/8 .3245 .495 .950 1.125 .479
.429 .3266 .149 .105
.3432
BG2041( )-10-( )Y 11/32 .3400 .515 1.200
.3422
.040
.3745
BG2041( )-12-( ) 3/8 .3715 .560 1.250
.3735
.500 .3901 .184 .133
BG2041( )-12-( )X 25/64 7/16 .3870 .580 1.100 1.300 .548
.491 .3891 .181 .126
.4057
BG2041( )-12-( )Y 13/32 .4025 .600 1.320
.4047

RECOMMENDED HOLE SIZE FOR:

MIN PREVAILING DOUBLE
TENSILE BREAK-OFF
PART AVAILABLE TORQUE SHEAR
STRENGTH LIMITS
NUMBER GRIP DASH (IN-LBS) (LBS)
5 5 (LBS) MIN MAX
NO. CLEARANCE INTERFERENCE MIN MIN
INSTALLATION INSTALLATION

.192 .1890
BG2041( )-06-( ) 6300
.190 .1875
.205 .2015
BG2041( )-06-( )X 4 7250 1600 .015 EXAMPLE OF PART NUMBER:
.203 .1997
.2205 .2171
BG2041( )-06-( )Y 8400
.2185 .2152 BG2041 ( ) -08 -09 ( )
.252 .2489
BG2041( )-08-( ) 11000
.250 .2472 DESIGNATION: " " = NOMINAL DIA
.268 .2640 "X" = 1/64" OVERSIZE
BG2041( )-08-( )X -02 6 12400 3000
.266 .2622
.2835 .2796
"Y" = 1/32" OVERSIZE
BG2041( )-08-( )Y
.2815 .2777
13900 DESIGNATES MAX GRIP IN 1/16" INCREMENTS
.315 .3110 DESIGNATES BASIC DIMENSIONS
BG2041( )-10-( ) 17130 DESIGNATES SPECIAL CODE
.313 .3092
.3305 .3265 DESIGNATES BASIC PART NUMBER
BG2041( )-10-( )X 8 18900 5000 .020
.3285 .3247
.346 .3421
BG2041( )-10-( )Y 20750
.344 .3402
.377 .3735
BG2041( )-12-( ) 24700
.375 .3717
.393 .3891
BG2041( )-12-( )X -03 10 26800 7000
.391 .3872
.409 .4047
BG2041( )-12-( )Y 29000
.407 .4027

U.S. PATENT NO.: 5,498,110; 5,634,751 AND FOREIGN PATENTS PENDING

MONOGRAM
OSI BOLT ™ BG2041( )-( )-( )( )
TITLE: DRAWING NO:

AEROSPACE
FASTENERS PROTRUDING HEX HEAD
CLOSE TOLERANCE SHANK
R
a TriMas company M. DOMINGUEZ 8/22/13
DRAWN BY: DRAWN DATE:

3423 SOUTH GARFIELD AVENUE INCONEL 718, 112 KSI SHEAR

COMMERCE, CALIFORNIA 90040 1/16" GRIP VARIATION APPROVED BY: CHECKED DATE:

(323) 722-4760 FAX (323) 727-1029

MONOGRAM
15-0246 D
PROPRIETARY AND CONFIDENTIAL: ECN NO: REV:
NOTICE: THIS DRAWING IS PART OF THE PROPRIETARY ARTICLE HEREIN DISCLOSED, OWNED BY MONOGRAM AEROSPACE FASTENERS, ANY PARTY BY ACCEPTING THIS DOCUMENT ASSUME CUSTODY THEREOF
AND AGREES: CAGE CODE:

98524
A: THE INFORMATION SET FORTH HEREIN IS GIVEN IN CONFIDENCE AND THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, NOR ITS CONTENTS REVEALED IN ANY MANNER TO

06-24-15
ECN DATE:

SHEET 1 OF 2
ANY PERSON EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED.
B: WITHOUT THE WRITTEN CONSENT OF MONOGRAM AEROSPACE FASTENERS, THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN UNDER NO CIRCUMSTANCES WILL BE USED IN THE
MANUFACTURE OR REPRODUCTION OF THE ARTICLE DISCLOSED, AND THE DELIVERY OF THIS DOCUMENT SHALL NOT CONSTITUTE ANY RIGHT OR LICENSE TO DO SO.
 COMPONENTS

PART NUMBER BODY SLEEVE NUT COREBOLT

MATERIAL FINISH MATERIAL FINISH MATERIAL FINISH MATERIAL FINISH

PASSIVATE
INCO 718 INCO 718
PER AMS2700
PER AMS5662 304 SS CAD PLATE CAD PLATE PER AMS5662 PASSIVATE
OR BAC5758
BG2041-( )-( )( ) HEAT TREATED TO PER AMS5639 PER AMS-QQ-P-416 PER AMS-QQ-P-416 HEAT TREATED TO PER AMS2700
ALUMINUM COAT
125 KSI FSU FULLY ANNEALED TYPE II, CL 1 TYPE II, CL 1 125 KSI FSU OR BAC5758
PER BMS-10-85
MINIMUM MINIMUM
TYPE I, CL A
A286 CRES
PASSIVATE PER AMS5732
INCO 718 INCO 718
PER AMS2700 OR AMS5737
PER AMS5662 304 SS CAD PLATE PASSIVATE PER AMS5662 PASSIVATE
OR BAC5758 HEAT TREATED
BG2041A-( )-( )( ) HEAT TREATED TO PER AMS5639 PER AMS-QQ-P-416 PER AMS2700 HEAT TREATED TO PER AMS2700
ALUMINUM COAT TO 160 KSI MIN
125 KSI FSU FULLY ANNEALED TYPE II, CL 1 OR BAC5758 125 KSI FSU OR BAC5758
PER BMS-10-85 TENSILE
MINIMUM MINIMUM
TYPE I, CL A
EXCEPT FOR -08
PASSIVATE NOMINAL SIZE ONLY:
INCO 718 INCO 718
PER AMS2700
PER AMS5662 304 SS PASSIVATE INCO 718 PASSIVATE PER AMS5662 PASSIVATE
OR BAC5758
BG2041B-( )-( )( ) HEAT TREATED TO PER AMS5639 PER AMS2700 PER AMS5662 PER AMS2700 HEAT TREATED TO PER AMS2700
ALUMINUM COAT
125 KSI FSU FULLY ANNEALED OR BAC5758 HEAT TREATED OR BAC5758 125 KSI FSU OR BAC5758
PER BMS-10-85
MINIMUM TO 125 KSI FSU MINIMUM
TYPE I, CL A
MINIMUM

INCO 718 INCO 718

PER AMS5662 PASSIVATE 304 SS PASSIVATE PASSIVATE PER AMS5662 PASSIVATE
BG2041C-( )-( )( ) HEAT TREATED TO PER AMS2700 PER AMS5639 PER AMS2700 PER AMS2700 HEAT TREATED TO PER AMS2700
125 KSI FSU OR BAC5758 FULLY ANNEALED OR BAC5758 OR BAC5758 125 KSI FSU OR BAC5758
MINIMUM MINIMUM

INSTALLATION SPECIFICATION: BG2003

PROCUREMENT SPECIFICATION: BG2000 4 GRIP RANGE 4 GRIP RANGE
2ND (INCHES) 2ND (INCHES)
GENERAL NOTES: DASH DASH
1. LUBRICANT: DRY FILM LUBRICANT PER THE CHEMICAL REQUIREMENTS OF NO. NO.
MIN GRIP MAX GRIP MIN GRIP MAX GRIP
MIL-L-PRF-46010, TYPE I AND/OR PARAFFIN WAX OR CETYL ALCOHOL AS
REQUIRED FOR PERFORMANCE. -02 .063 .125 -18 1.063 1.125
-03 .126 .187 -19 1.126 1.187
2. LOCKING FEATURE CONSISTS OF THREE (3) INDENTATIONS LOCATED 120°
APART ON THE PERIPHERY OF THE NUT COMPONENT. -04 .188 .250 -20 1.188 1.250
-05 .251 .312 -21 1.251 1.312
3. SEE BG2003 FOR INSTALLATION AND REMOVAL INFORMATION. -06 .313 .375 -22 1.313 1.375
-07 .376 .437 -23 1.376 1.437
4. GRIP LENGTHS NOT LISTED MAY BE AVAILABLE UPON REQUEST. -08 .438 .500 -24 1.438 1.500
-09 .501 .562 -25 1.501 1.562
5. INSTALLATION HOLE SHALL BE RADIUSED TO CLEAR HEAD TO SHANK RADIUS.
-10 .563 .625 -26 1.563 1.625
6. ALL DIMENSIONS TO BE MET AFTER FINISH AND BEFORE LUBRICATION. -11 .626 .687 -27 1.626 1.687
-12 .688 .750 -28 1.688 1.750
7. BEARING SURFACE OF HEAD SHALL BE PERPENDICULAR TO SHANK DIAMETER WITHIN .002 T.I.R. -13 .751 .812 -29 1.751 1.812
-14 .813 .875 -30 1.813 1.875
8. INSERT FABRICATED FROM ACETAL PLASTIC PER ASTM-D4181.
-15 .876 .937 -31 1.876 1.937
-16 .938 1.000 -32 1.938 2.000
-17 1.001 1.062

U.S. PATENT NO.: 5,498,110; 5,634,751 AND FOREIGN PATENTS PENDING

MONOGRAM
BG2041( )-( )-( )( )
TITLE: DRAWING NO:

AEROSPACE OSI BOLT ™

FASTENERS PROTRUDING HEX HEAD
CLOSE TOLERANCE SHANK
R
a TriMas company M. DOMINGUEZ 8/22/13
DRAWN BY: DRAWN DATE:

3423 SOUTH GARFIELD AVENUE INCONEL 718, 112 KSI SHEAR

COMMERCE, CALIFORNIA 90040 1/16" GRIP VARIATION APPROVED BY: CHECKED DATE:

(323) 722-4760 FAX (323) 727-1029

MONOGRAM 15-0246 D
PROPRIETARY AND CONFIDENTIAL: ECN NO: REV:
NOTICE: THIS DRAWING IS PART OF THE PROPRIETARY ARTICLE HEREIN DISCLOSED, OWNED BY MONOGRAM AEROSPACE FASTENERS, ANY PARTY BY ACCEPTING THIS DOCUMENT ASSUME CUSTODY THEREOF
AND AGREES: CAGE CODE:

98524 06-24-15
A: THE INFORMATION SET FORTH HEREIN IS GIVEN IN CONFIDENCE AND THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, NOR ITS CONTENTS REVEALED IN ANY MANNER TO
ECN DATE:

SHEET 2 OF 2
ANY PERSON EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED.
B: WITHOUT THE WRITTEN CONSENT OF MONOGRAM AEROSPACE FASTENERS, THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN UNDER NO CIRCUMSTANCES WILL BE USED IN THE
MANUFACTURE OR REPRODUCTION OF THE ARTICLE DISCLOSED, AND THE DELIVERY OF THIS DOCUMENT SHALL NOT CONSTITUTE ANY RIGHT OR LICENSE TO DO SO.