Model 1188
Stratum 3E, 25.8 x 25.8 mm OCXO
Features
10 to 40 MHz Frequency Range
Compliant to Stratum 3E of GR-1244-CORE
Through-Hole Configuration
3.3V, 5.0V or 12V operation
Low Jitter/Phase Noise
Applications 25.8 x 25.8 x 12.7 mm
Telecom Switching
Wireless Communication
Description
The CTS Model 1188 is a low cost, small size, high performance OCXO. The high quality SC Quartz Crystal used in
this OCXO offers high stability and low jitter/phase noise, making it the ideal choice for any telecommunications
system.
Ordering Information – Table 1
Temp Supply Voltage Frequency
Model Stability Aging Output
Range Voltage Control Code
1188 28 G E D H N xxMxxx
Stability Code Supply Code Output Code Spec. Standard
Code Frequencies
(ppb) B 12V ±5% H HCMOS N Fixed freq. (MHz)*
17 ±100 D 5.0V ±5% S Sinewave V EFC 10M000
58 ±50 E 3.3V ±5% 12M800
38 ±30
13M000
28 ±20 Temp Code Per day Per year
Code 16M384
18 ±10 Range C 1 ppb 0.1 ppm < 40MHz
19M440
59 10 pk-pk A 0 to 50°C D 0.5 ppb 60 ppb < 20MHz
20M000
B 0 to 70°C L 0.3 ppb 30 ppb < 10MHz
25M600
D -20 to 70°C
26M000
E -30 to 70°C
38M880
G -40 to 85°C
40M000
* Custom frequencies are
Part Number Example: 1188-28GEDHN-10M000 available. Please consult factory.
Rev. A_0223 Page 1 of 4
©2023 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific
applications or test equipment. For more information, or to request a quote, visit our website at www.ctscorp.com.
Model 1188
Stratum 3E, 25.8 x 25.8 mm OCXO
Electrical Specifications
Parameter Conditions & Remarks Min Typical Max Unit
Operating Conditions
Operating Temperature Range TOP -40 - +85 °C
3.135 3.3 3.465
Supply Voltage VCC: 3.3V or 5.0V 4.75 5.0 5.25 Vdc
11.4 12.0 12.6
Warm-up - - 3.6
Power Consumption W
Steady State; TA = 25°C - 1.0 1.2
HCMOS 5 10 15 pF
Load
Sinewave 45 50 55 Ω
Frequency Stability
FNOM – See ordering options
Frequency 10 - 40 MHz
for standard frequencies
25°C, at time of shipment
Calibration - - ±0.200 ppm
(fixed frequency option “N”)
Freq. vs Temperature See Table 1 options - - ±10 ppb
Freq. vs Supply Voltage VCC ±5% - ±2 ±5 ppb
Freq. vs Load 15 pf ±5% - - ±1 ppb
±1 ppb/day
- -
Freq. vs Time (Aging) At time of shipment ±100 ppb/year
- -
±500 ppb/10 yrs
-
Short Term Stability (ADEV) 1.0 sec – still air 0.01 0.02 ppb
-
TA = 25°C, within 100 ppb of
Warm-up time - - 5 minutes
freq. @ 60 minutes
Electronic Frequency Control (EFC)
Input Impedance ZI 50 - - kΩ
Modulation Bandwidth -3 dB 500 - - Hz
VC; positive monotonic
Control Voltage Range 0 - VREF or VCC Vdc
(refer to VREF p/n option)
Tuning Range ±0.7 - - ppm
Linearity - - 10 %
Output Parameters
CMOS Output Levels 3.3V (LVCMOS) VOL - - 10% VCC
Vdc
(option) 5.0V (HCMOS) VOH 90% VCC - -
Rise/Fall Times 10% to 90%, 10pf load - - 7 ns
Duty Cycle @50% of output signal 45 50 55 %
Rev. A_0223 Page 2 of 4
©2023 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific
applications or test equipment. For more information, or to request a quote, visit our website at www.ctscorp.com.
Model 1188
Stratum 3E, 25.8 x 25.8 mm OCXO
Electrical Specifications (Continued)
Parameter Conditions & Remarks Min Typical Max Unit
Sinewave Output
Into 50 Ω 5 7 9 dBm
(option)
Harmonics - - -35 dBc
10 Hz - -120 -
100 Hz - -140 -
Phase Noise
1 kHz - -145 - dBc/Hz
(for 3.3V, 10 MHz LVCMOS)
10 kHz - -150 -
100 kHz - -155 -
Subharmonics FNOM > 20MHz - - -30 dBc
Spurious - - -70 dBc
VCC = 3.3V, 4ma max 2.7 2.8 2.9
Reference Voltage
VCC = 5.0V, 4ma max 4.4 4.5 4.6 Vdc
(optional)
VCC = 12.0V, 4ma max 4.9 5.0 5.1
Mechanical and Environmental
Soldering Hand solder only. 245°C for 10 seconds
MSL Level 1
500 G’s 1 ms, half sine, 3 shock per direction,
Shock :
per MIL-STD-202F, Method 213B, Test Condition D.
0.06” D.A. or 10 G’s Peak, 10 to 500 Hz,
Sinusoidal Vibration :
per MIL-STD-202F, Method 204D, Test Condition A.
5.35 G’s RMS. 20 to 200 Hz, per MIL-STD-202F,
Random Vibration :
Method 214, Test Condition 1A, 15 minutes each axis.
Seal : Hermetic
Marking Permanency : MIL-STD-202F, Method 215J.
Storage Temperature Range: -45°C to +95°C
Rev. A_0223 Page 3 of 4
©2023 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific
applications or test equipment. For more information, or to request a quote, visit our website at www.ctscorp.com.
Model 1188
Stratum 3E, 25.8 x 25.8 mm OCXO
Mechanical Specifications
CTS** Marking
1188-xxxxxx ** Mfg Site Code
xxMxxx
YYWWSNSNSN SNSNSN Serial Number
YYWW Date Code
Pin Assignments
Pin Function
1 RF Output
2 Ground/Case
3 VC; Voltage Control
4 VREF; Reference voltage
5 VCC
* Consult factory for 11.56mm maximum height option.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
Rev. A_0223 Page 4 of 4
©2023 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific
applications or test equipment. For more information, or to request a quote, visit our website at www.ctscorp.com.
