Wednesday, July 3, 2024
Plaslube® PC-50/TF/22 BK223 Units English
Techmer Polymer Modifiers - Polycarbonate
Action Legend (Open)
General Information
General
Material Status Commercial: Active
Availability Africa & Middle East Europe North America
Asia Pacific Latin America
RoHS Compliance RoHS Compliant
Forms Pellets
ASTM & ISO Properties 1
Physical Nominal Value Unit Test Method
Density / Specific Gravity 1.29 ASTM D792
Molding Shrinkage - Flow (0.125 in) 7.0E-3 in/in ASTM D955
Water Absorption (24 hr) 0.12 % ASTM D570
Mechanical Nominal Value Unit Test Method
Tensile Strength 7500 psi ASTM D638
Tensile Elongation (Break) 40 % ASTM D638
Flexural Modulus 300000 psi ASTM D790
Flexural Strength 11000 psi ASTM D790
Compressive Strength 9000 psi ASTM D695
Impact Nominal Value Unit Test Method
Notched Izod Impact 3.3 ft·lb/in ASTM D256
Hardness Nominal Value Unit Test Method
Rockwell Hardness (R-Scale) 109 ASTM D785
Thermal Nominal Value Unit Test Method
Deflection Temperature Under Load (264 psi, Unannealed) 275 °F ASTM D648
CLTE - Flow 3.9E-5 in/in/°F ASTM D696
Flammability Nominal Value Unit Test Method
Flame Rating (0.06 in) HB UL 94
Notes
1 Typical properties: these are not to be construed as specifications.
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information
www.ulprospector.com contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties.
The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
