Master Chief inspired
About this Pattern
• While making this amigurrumi you will work in continuous rounds, unless told otherwise. Use
a stitch marker marker to mark the end of your rounds.
• The finished amigurumi should measure about 17 cm tall. The size may vary and depends
on yarn type and personal yarn tension.
• Instructions that need to be repeated will be marked with brackets followed by the number
of iterations. Example: Rnd 5. [inc, 2 sc ] x 4 (16)
Important Information
• This pattern is for personal use only
• This pattern or parts of it may not be reproduced, sold, distributed or translated without
authorization
• If you publish photos of items made from this pattern please give me credit as the original
designer of the pattern and if possible tag my instagram: @Chrisis.Art
• If you have troubles with the pattern or spot a mistake just contact me and I’m more than
© 2021 Chrisis.Art | All rights reserved Chrisis.art
Materials & Tools Abbrevations
• Arcylic Yarn (DK yarn) (US terms)
Green • sc = single crochet
Yellow • inc = increase (2 sc in the next sc)
Black • hdc = half double crochet
• 2,5 mm Crochet Hook • dc = double crochet
• Stitch Marker • tc = triple crochet
• Stuffing • sl st = slip stitch
• Scissors • CC = Color Change
• Yarn Needle
Rnd 18) [3 sc, dec] x 6 (24)
Head
Rnd 19) [2 sc, dec] x 6 (18)
–- start with green yarn –-
stuff and finish off
Rnd 1) 6 sc in magic ring (6)
Rnd 2) inc around (12)
Rnd 3) [1 sc, inc] x 6 (18)
Rnd 4) [2 sc, inc] x 6 (24)
Rnd 5) [3 sc, inc] x 6 (30)
Rnd 6) [4 sc, inc] x 6 (36)
Rnd 7) [5 sc, inc] x 6 (42)
Rnd 8) sc around (42)
Rnd 9-10) 11 sc, CC yellow 15 sc, CC green,
16 sc (42) (2 Rounds)
Rnd 11-12) 11 sc, CC yellow 16 sc, CC green
15 sc (42)
Rnd 13) 12 sc, CC yellow 15 sc, CC green
15sc (42)
Rnd 14) 13 sc, CC yellow 13 sc, CC green 16
sc (42)
Rnd 15) sc around (42)
Rnd 16) [5 sc, dec] x 6 (36) Fig. 1
Rnd 17) [4 sc, dec] x 6 (30)
© 2021 Chrisis.Art | All rights reserved Chrisis.art
Helmet Detail Top
--- start with green yarn –-
Row 1) Ch 17
Rnd 2) Start in second loop from
hook: 15 sc, 3 sc in last st, 14 sc
on the other side of the chain, inc (34)
Fig. 2
Rnd 3) sc around (32)
Row 4) Fold your piece and sc 16 across (16)
–––
(This piece will go above the
yellow part of the helmet later, See figure 4)
Helmet Detail Bottom
Fig. 3
--- start with green yarn –-
Row 1) Ch 25
Row 2) Start in second loop from
hook: 10 sc, ch 2, 3 dc, ch 2, sl st, sc 10 (24)
–––
(This piece will go around the
sides and the bottom part of the
yellow lart of the helmet later, See figure 4)
Fig. 4
Legs (make 2), Body
--- start with green yarn –-
Rnd 1) 6 sc in magic ring (6)
Rnd 2) inc around (12)
Rnd 3-5) sc around (12) (3 rounds)
--- CC to black yarn---
Rnd 6-9) sc around (12) (4 rounds) Fig. 5
finish the first leg off at this point and start the
second leg. Do not finish the second leg off
after round 9 and continue with Rnd 10
© 2021 Chrisis.Art | All rights reserved Chrisis.art
Rnd 10) ch 3, join the second leg with the
first leg and sc around (30) (24)
Rnd 11) 5 sc, inc, 13 sc, inc, 10 sc (32)
Rnd 12-16) sc around (32) (5 rounds)
Rnd 17) 5 sc, dec, 13 sc, dec, 10 sc, (30)
–- CC to green yarn –-
Rnd 18) sc around (30)
Rnd 19) [3 sc, dec] x 6 (24)
Rnd 20-21) sc around (24) (2 rounds) Fig. 6
--- Start to stuff the legs and the body ---
Rnd 22) [2 sc, dec] x 6 (18)
Rnd 23) sc around (18)
–- CC to black yarn –-
Rnd 24) sc around (18)
Stuff, finish off and leave a tail for sewing
Arms (make 2) Fig. 7
–- Start with black yarn –-
Rnd 1) 6 sc in magic ring (6)
Rnd 2) [2 sc, inc] x 2 (8)
Rnd 3) sc around (8)
–- CC to green yarn–-
Rnd 4-7) sc around (8) (4 rounds)
–- CC to black yarn –-
Rnd 8) sc around (8)
–- CC to green yarn –-
Fig. 8
Rnd 9-12) sc around (4 rounds)
stuff the tip of the arms then fold the arms
and sc 4 across
Fig. 9
© 2021 Chrisis.Art | All rights reserved Chrisis.art
sewing
Armor: Legs (make 2)
–- Start with green yarn –-
Row 1) Ch 5
Rnd 2) Start in second loop from
hook: 3 sc, 3 sc in last st, 2 sc on the
other side of the chain, inc (10)
Fig. 10
Rnd 3) inc, 2 sc, sl st (11) (do not
finish the last round)
finish off and leave a tail for sewing
Belt
–- Start with green yarn –- Fig. 11
Row 1) Ch 34
Rnd 2) Start in second loop from
hook: 14 sc, ch 3, 3 tr, ch 3, sl st, 15 sc
finish off and leave a tail for sewing
Fig. 12
Armor: Chest
–- Start with green yarn –-
Row 1) Ch 29
Rnd 2) Start in second loop from
hook: 12 sc, ch 2, 3 dc, ch 2, sl st, 12 sc (28)
finish off and leave a tail for sewing
Jet-Pack (make 2)
Fig. 13
–- Start with green yarn –-
Row 1) Ch 7
Rnd 2) Start in second loop from
Square Jet-Pack
–- Start with green yarn –-
hook: 5 sc, 3 sc in last st, 4 sc on the
Row 1) Ch 4, turn
other side of the chain, inc (14)
Row 2-3) 3 sc, ch 1, turn (2 Rows)
Rnd 3) sc around (14)
Row 4) 3 sc
Stuff lightly, finish off and leave a tail for
Finish off and leave a tail for sewing
© 2021 Chrisis.Art | All rights reserved Chrisis.art
Time for Assembly
Please use the provided picture as
guidance for positioning the pieces.
1. Pin and sew the “Helmet Detail
Bottom” on the sides and bottom of the
yellow area on the head.
2. Pin and sew the “Helmet Detail Top”
on top of the yellow area on the head.
3. Pin and sew the arms on the sides of
the body
4. Pin and sew the “Armor Chest” where
the green color change is on the body.
Position the “flap” in the middle of the
bodie’s front.
5. Pin and sew the belt around the
waist. Make sure to sew the flap
between the legs.
© 2021 Chrisis.Art | All rights reserved Chrisis.art
6. Pin and sew the “Armor: Legs” parts
horizontally on the side of the legs
7. Pin and sew the “Jet-Pack square” in
the middle of the back on top of the
“Armor: Chest” piece. Pin and sew the
Jet-Pack pieces left and right from it.
See image on the right: The red
geometric forms display the positioning
of these pieces.
8. Embroider a “117” with white yarn on
the chest of Master Chief. It should be
on Master Chiefs left chest.
9. Pin ad sew the Head to the body.
© 2021 Chrisis.Art | All rights reserved Chrisis.art
Congratulations! Master Chief is now Finished!
Thank you for purchasing this pattern! More paterns will be available on my Etsy Shop
“ChrisisArtShop”. I am excited to see your versions on Instagram!
© 2021 Chrisis.Art | All rights reserved Chrisis.art
